No audio in sequence but in source screen

I imported Go pro footage and soudn works in source screen and program but does not play in the sequennce. It doesnt even show the audio file there. It's never done this before & I already re started computer and program. No luck.

Patch A1 in the Audio Header

Similar Messages

Delayed playback after editing audio in a Multi-cam Source Sequence

I have a Multi-cam Source Sequence (MSS). It contains 3-cameras, only two of their audio tracks, plus two more audio tracks from separate audio recorders. This MSS is, of course, embedded into my main timeline, where I've performed my cuts between cameras. Playback has been beautiful and smooth until I mixed the audio levels between the various audio tracks in the MSS. Now, back on my main program timeline, playback starts approximately 3 to 4 seconds after hitting the spacebar or L key.
Some mixing was performed on the new Audio Clip Mixer. Most mixing was done manually by adding and manipulating keyframes directly on the timeline. I have Minimum Time Interval Thinning set to 400 ms, so that I don't get a million useless keyframes on my audio tracks when using either Audio Mixer. For what it's worth, here's a screenshot of a portion of my MSS mix (approximately 1 minute, 30 seconds). It is typical of the rest of the MSS timeline (approximately 40 minutes; though I've only mixed the audio for a roughly 10 minute segment so far).
Footage is from two Canon VIXIA HF G20 (AVCHD) cameras and a GoPro (MP4). Again, playback was beautiful before messing with the audio mix in the MSS. I've checked the Media Cache, Disk Cache, etc and it's got plenty of space left (around 30 GB).
Playback literally feels like it's 1998 all over again and I'm working in Premiere 5.1!
Could these, relatively few, audio keyframes really be slowing me down so dramatically? If so, can I do something to make it run faster? If this is not the cause, what else might I be missing?
=== System Specs ===
i7-3630qm (Laptop)
NVIDIA GTX 670mx - 3GB GDDR5
16GB RAM

My multicam sequences are usually created by Red Giant's PluralEyes. (I would LOVE to create them with Premiere's new Audio Sync feature, but so far that only works about 0% of the time). So the footage is synced with PluralEyes 3.2.1. A timeline is exported from PluralEyes and then imported into a project. Once in Premiere the sequence is only a "regular" sequence. I know of no way to convert a regular sequence to a new sequence (that would be a cool feature; right-click on a regular sequence and choose "Convert to Multicam Source Sequence"). I create a new Multicam Source Sequence (MSS) using any two video clips. I choose In-point for the sync. The MSS is created and opened. I select all on the timeline and delete. I now have a blank MSS. I select all from the PluralEyes generated "regular" sequence; copy; paste into the blank MSS. Now my MSS is ready to use.
Are you saying that audio is ALWAYS "Adaptive" when created as I've outlined above? How can it be changed? What should it be?
If I remember correctly, Premiere CC has been setting up these Multicam Source Sequences with four channels, instead of stereo. I thought it was weird (I don't recall this happening in CS6). So I looked into the manual and hacked my way around to reducing the channels to stereo. Through track assignment, etc (I can't remember where) I was able to get all but one of the tracks to playback. Ultimately that track was unimportant, so I ended up deleting it rather than continuing to fight Premiere to make the track playback audibly.
I'll look into the link you provided above. Meanwhile, did anything I say here spark any further ideas? Things to try?

Hi, I have a macbook pro 2012 13 inch, everytime i go to watch a video (youtube/uni lectures) online (i use firefox), the video plays but if i go into another tab, the audio keeps playing, but the image on screen will be frozen. It gets really frustrating

Hi,
I have a macbook pro 2012 13 inch, which i use for uni and youtube etc. I use firefox for my web browsing, whenever I go to watch videos, from youtube or even uni lectures (for all my subjects) the video and audio play fine, but as soon as i switch into another tab, the audio continues to play whilst the video lags and stops all together, freezing on the current screen. The timestamp on the video players also stops, which gets incredibly frustrating when I am watching uni lectures, does anybody know how to fix this?? Please help.

Which os version are you using?
Which Firefox version?
Have you posted in the Firefox forums or contacted their tech support for assistance?
Have you made sure you are using the latest version of Adobe Flash Player?

The audio plays fine in the project screen but in fullscreen playback the audio is lost on certain clips often alternating with each clip. How to fix?

Audio is fine in project screen play back but when full screen playback is used the audio is lost from alternating clips. This carries over to the exported file/final version. This is my 1st time using I movie.

Hey did you find any solutions? I'm running into the same problems, would appreciate feedback and possible ways to fix this problem?
Thanks!

HT1657 We just downloaded a movie from Itunes but the picture is completely scrambled. Audio is fine but all you can see are funny color pixels on the screen..how do we fix this?e

We just downloaded a movie from Itunes but the picture is completely scrambled. Audio is fine but all you can see are funny color pixels on the screen..how do we fix this?

The movie is from iTunes. You would think that a download from iTunes to a MacBook could be watched on an HDTV using Apple TV without any headaches bit this does not appear to be the case.

Set default audio track for playback in Source monitor

So I'm an editor that is somewhat new to the profession and I am working on a project right now with close to 100 video clips in my project. Most of the clips have their audio recorded to track 2 but when I load the clips into the source window to find the footage asked for in my script there is no audio playback.
They play fine in the program monitor once placed in a timeline, because I have all the audio tracks are turned on until I do my mastering at the end of the project. To get audio playback in the source monitor I have to change the view option to audio waveform which shows a blank screen because there is no audio on track. I then go to the drop-down menu just below the video display and select track 2 at which point the audio waveform shows up and plays back fine. This isn't too arduous a process and isn't a great burden but it slows my workflow down considerably as I have to repeat the process for each new clip I load into the source monitor.
My question then is if there is anywhere in Premiere that I can set which audio track is the default audio playback track for clips loaded in the source monitor. I work on a lot of similar projects like this for the same client and they don't have the most rigorous standards for their shooters. This problem has come up before and will most assuredly arise again in the future so any tips/advice on how to fix this on my end would be much appreciated.
Thanks!

I'm not really sure.I don't do any shooting for the client and in fact don't have any contact with the shooters, we just do the post. They use a number of different freelance videographers all of whom have different equipment and procedures when it comes to formatting, orginization, etc.

HT204400 Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen

Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help me

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Why can't I open a sequence in the source monitor?

Normally when I edit, I use pluralize, which creates a sequence in which I can take notes. I usually then drag that sequence into my source monitor, create in and out point and place that into my final timeline. For some reason, Premiere is not letting me drag the file I need into the source monitor. Any idea why? Is there something with the settings off?
Please help

What's wierd is that some Sequences can be brought into my source monitor without a problem, while other's cannot.
I also noticed that the ones that can't be brought into the source monitor, if you were to import them directly onto the timeline, they are imported without audio. Those that can be brought into the source monitor import with audio and video.
Any ideas?

Opening a new Window/Application without losing control of source Screen

Hi,
I am displaying two tables with some columns. Some one of the columns have an hyperlink which would open a new window.
Now in my case reqirement is that, user should be able to open multipme window and should be able to modify or proces some data on source screen( where two table are displayed).
But when I open a new window by pop up, i am loosing the control of the source screen.
How can i solve this issue?
Do I need to call saprate application and then probably I will not loose the control?
Thanks
PG

Hi Thomas,
Thanks for the reply.
So let's say in my case,
Step 1: I have called a new application and made some changes to som data.
Step 2: Then I press Save button in new window or application to save the chages.
Step 3: After pressing Save button, the second application get's closed and on the calling application one row will be
appended into the table and will be reflected on calling application.
To perform step 3, I need to communicate with calling application. Or in other word , I have to call back the source application .
So instead of communicating, I think I can just call back the source application again and It will be displayed with updated data! ( The only case is, it will execute or refresh the whole application instead of one table, which would slow down the performance)
Or do you think, in this case something else could be done to update table on source application?
Regards
PG

Audio on drag and drop source

Hello all,
I am looking for a way to get a drag and drop source play an audio file when clicked, Such that the user click first to listen to the audio and then places the source on the right target.
Any idea or workaround will be appreciated.
thanks in advance.

Just tested this out, have also a look at this screenshot:
In this example I used shapes for target (Targx) and Drag Sources (Dragy). I created a duplicate for each drag source, located in the same place, but without stroke/fill and acting as a button. Those are the BtAudioz objects on the timeline They can be under the drag sources since those are non-interactive and will not limit the functionality of the shape buttons. I don't know what your actions are for the D&D, which will pause at 1.5secs, so I just pushed the pausing of the audio buttons bit closer to the end. It depends on your situation. To prevent releasing the playhead when one of the buttons is clicked, you have to use an advanced action to play the audio clip, or, which I did here, a shared action. That action has only one command 'Play Audio' and the audio clip will be the parameter if you use a shared action as I did. It works perfectly.

[SOLVED]Half-Life 2 couldn't run. Showed "source" screen then crashed.

Okay, suddenly I really got the urge to play this game again (I never managed to finish the game actually).
The appdb page it supposed to run flawlessly with wine. But so far, I couldn't play the game at all.
At first, I realized that I didn't have lib32-mpg123 package installed. After installing the package, the game start screen showed, but it a little off screen. Wrong resolution. So I changed the resolution to native 1366x768. As the result, the game became unplayable. Only showed the "Source" screen then crashed.
I tried to find a solution but no luck so far (well, it's almost 9 years old after all).
I got Dota 2 and Torchlight 2 installed. Both run almost flawlessly.
Here the wine log
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
err:winediag:xrandr12_init_modes Broken NVIDIA RandR detected, falling back to RandR 1.0. Please consider using the Nouveau driver instead.
err:winediag:SECUR32_initNTLMSP ntlm_auth was not found or is outdated. Make sure that ntlm_auth >= 3.0.25 is in your path. Usually, you can find it in the winbind package of your distribution.
fixme:win:EnumDisplayDevicesW ((null),0,0x32e1b8,0x00000000), stub!
Using breakpad crash handler
fixme:advapi:EventRegister {47a9201e-73b0-42ce-9821-7e134361bc6f}, 0x3f005530, 0x3f036b40, 0x3f036b38
fixme:advapi:EventRegister {58a9201e-73b0-42ce-9821-7e134361bc70}, 0x3f005530, 0x3f036b78, 0x3f036b70
fixme:advapi:EventRegister {3fa9201e-73b0-43fe-9821-7e145359bc6f}, 0x3f005530, 0x3f036b08, 0x3f036b00
fixme:advapi:EventRegister {1432afee-73b0-42ce-9821-7e134361b433}, 0x3f005530, 0x3f036bb0, 0x3f036ba8
fixme:advapi:EventRegister {4372afee-73b0-42ce-9821-7e134361b519}, 0x3f005530, 0x3f036be8, 0x3f036be0
fixme:advapi:EventUnregister deadbeef: stub
fixme:advapi:EventUnregister deadbeef: stub
fixme:advapi:EventUnregister deadbeef: stub
fixme:advapi:EventUnregister deadbeef: stub
fixme:advapi:EventUnregister deadbeef: stub
fixme:keyboard:X11DRV_LoadKeyboardLayout L"00000409", 0000: stub!
fixme:d3d:debug_d3dformat Unrecognized 0x434f5441 (as fourcc: ATOC) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x434f5441) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x41415353 (as fourcc: SSAA) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x41415353) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x434f5441 (as fourcc: ATOC) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x434f5441) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x41415353 (as fourcc: SSAA) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x41415353) in the format lookup table
fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),0,3,(nil),0,(nil)) - stub!
fixme:wbemprox:client_security_SetBlanket 0xf420afd8, 0x19f598, 10, 0, (null), 3, 3, (nil), 0x00000000
fixme:wbemprox:client_security_Release 0xf420afd8
fixme:win:EnumDisplayDevicesW ((null),0,0x32cf58,0x00000000), stub!
err:x11settings:X11DRV_ChangeDisplaySettingsEx No matching mode found 1366x768x32 @60! (XRandR 1.0)
err:ole:CoInitializeEx Attempt to change threading model of this apartment from multi-threaded to apartment threaded
err:iccvid:decode_cinepak CVID: unknown chunk_id 00003001
fixme:d3d9:D3DPERF_SetOptions (0x1) : stub
fixme:d3d:debug_d3dformat Unrecognized 0x5a574152 (as fourcc: RAWZ) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x5a574152) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x5a574152 (as fourcc: RAWZ) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x5a574152) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x5a574152 (as fourcc: RAWZ) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x5a574152) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x5a574152 (as fourcc: RAWZ) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x5a574152) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x5a574152 (as fourcc: RAWZ) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x5a574152) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x5a574152 (as fourcc: RAWZ) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x5a574152) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x5a574152 (as fourcc: RAWZ) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x5a574152) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x5a574152 (as fourcc: RAWZ) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x5a574152) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x36314644 (as fourcc: DF16) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x36314644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x36314644 (as fourcc: DF16) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x36314644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x36314644 (as fourcc: DF16) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x36314644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x36314644 (as fourcc: DF16) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x36314644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x36314644 (as fourcc: DF16) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x36314644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x36314644 (as fourcc: DF16) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x36314644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x36314644 (as fourcc: DF16) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x36314644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x36314644 (as fourcc: DF16) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x36314644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x34324644 (as fourcc: DF24) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x34324644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x34324644 (as fourcc: DF24) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x34324644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x34324644 (as fourcc: DF24) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x34324644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x34324644 (as fourcc: DF24) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x34324644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x34324644 (as fourcc: DF24) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x34324644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x34324644 (as fourcc: DF24) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x34324644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x34324644 (as fourcc: DF24) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x34324644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x34324644 (as fourcc: DF24) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x34324644) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x31495441 (as fourcc: ATI1) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x31495441) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x31495441 (as fourcc: ATI1) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x31495441) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x31495441 (as fourcc: ATI1) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x31495441) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x31495441 (as fourcc: ATI1) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x31495441) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x31495441 (as fourcc: ATI1) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x31495441) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x31495441 (as fourcc: ATI1) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x31495441) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x31495441 (as fourcc: ATI1) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x31495441) in the format lookup table
fixme:d3d:debug_d3dformat Unrecognized 0x31495441 (as fourcc: ATI1) WINED3DFORMAT!
fixme:d3d:wined3d_get_format Can't find format unrecognized (0x31495441) in the format lookup table
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 10 (X_UnmapWindow)
Resource id in failed request: 0x3200001
Serial number of failed request: 150
Current serial number in output stream: 153
I hope somebody can help me. Thanks in advance!
Oh yeah, I have pretty lot Dota 2 beta keys in my inventory (but all of them not available for China).
How about I give some of it for anyone who can solve my problem?
Last edited by amuroray (2013-03-31 22:28:22)

I googled the error messages from your log. I suggest you do the same.
The first entry in the "Workarounds" section of this page on the Wine website is linked in a few forum discussions with people with the same fixme debug output you get, so hopefully will solve the problem. Especially disabling the in-game community.
EDIT: ChemBro raises an interesting point, though I do know a few people using Arch who can get hl2.exe-based games working with optimus.
Last edited by aphirst (2013-03-29 10:38:55)

Audio is great, but no video

I recently purchased a Panasonic PV GS31 mini DV camcorder. After shooting a few movies of my daugter, I imported them into iMovie 4.01 and tried to play them. The audio is there, but I have no video, just a black screen. I have the same results using Quicktime 7.03. Anybody have a solution or run into a similar problem?
Do I need iMovie DV in order to work with a DV camcorder? Why can't I open them in Quicktime either?

Hi Stephen.
Any type of iMovie should work OK with a DV Camcorder - that's what it's been designed for - for the past 5 years.
I assume you used a FireWire cable to import your video?
Have you got your iMovie project set for the format of your camera - PAL or NTSC?
If everything is set up OK you can sometimes get glitches that stop things working properly.
1. Try removing and re-connecting the FireWire cable.
2. Turn off the computer and unplug the power cable for a minute.
When importing you should see the video in the monitor.
Ian.

Audio dropping out, but video fine. Please help!

For the past week or so i've been having this issue where after so many minutes of watching tv the audio will cut out from that channel, but the video will remain the same. If I change the channel the audio is fine, but eventually it will cut out. I then can go to a THIRD channel and, sure enough, sound will drop eventually. It's not the TV because I was watching DVDs all day and it was perfectly fine. I don't have surround sound, it's not hooked through a receiver or anything else fancy. It's just a straight connection from the box to the TV via an HDMI cable. Any help would be greatly appreciated.

That might be fixed by doing the following
There is a special setup menu that you can enter, that is NOT part of the regular set to box menu settings. To get there:
Power off the Set top box -> Select -> Menu.
On STB's with no select or menu buttons, on the remote press STB Power OFF -> OK -> Menu.
You will see a white screen and an all text menu called USER SETTINGS. Use the arrow keys to move around.
Scroll down to a line that says "ADDITIONAL HDMI SETTINGS" and hit a right arrow to get into the next level of the menu
There is a sound setting called AUDIO OUTPUT It says AUTO Scroll to it and change it to L-PCM.
Exit out of the menus, power the unit off and power it on again

Dropping audio when dragging clip from Source Panel to Timeline

I have having issues with audio being dropped when dragged from the Source Panel to the Timeline. Audio is present in the Source Panel and plays great along with video, but when I drag the selected clip to the Timeline it drops the audio.

Can't transfer video from source monitor to timeline
This is an answer to a previous topic about video but the same answer also applies to audio

Satellite P300-23L - can't record audio coming from an internal source

Hi.
I can't record audio coming from an internal source. Can someone assist please?
I have reinstalled the devices etc but other recording devices does not show up.
Thanks
Operating System: Windows Vista Home Premium (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.100218-0019)
Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
System Model: Satellite P300
BIOS: PhoenixBIOS 4.0 Release 6.1
Processor: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz (2 CPUs), ~2.0GHz
Memory: 2908MB RAM
Page File: 3012MB used, 3005MB available
Sound Capture Devices
Description: Microphone (Conexant High Definition SmartAudio 221)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: CHDRT32.sys
Driver Version: 4.83.0001.0000 (English)
Driver Attributes: Final Retail
Date and Size: 1/15/2009 14:50:10, 439296 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Message was edited by: markrowe

This is OK because the Conexant sound chip does not support other sources
Ive got a unit with Realtek sound chips and with Conexant sound chip.
The Realtek support the recording from other sources but Conexant doesnt.

No audio in sequence but in source screen

Similar Messages

Maybe you are looking for