No audio in Windows 8.1 =(

Hi
I have a HP Split 13 x2 and upgrade to "Windows 8.1 Single Language" and then audio don`t work i try installing this drivers -> http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128087-1&cc=us&dlc=en&lc=en... but say there are not compatible with my hardware and don`t finalize the installation, i try many ways to install this and others drivers but any don`t work, please help me.
PD: Sorry for my bad english i hope u can understand my problem and help me.

how do i turn my audio back on ?

Similar Messages

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

My mac desktop will not provide sound from internal speakers. when I go to audio devices window it only shows airplay. How can I get internal speakers back.

My mac desktop will not provide sound from internal speakers. When I go to audio devices window it only shows airplay. How can I get internal speakers back.

There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store.

Problem with the audio editor window into logic pro X

hello everybody, I have a problem with the audio editor window ! the "onglet" (sorry I don't know the word in english) "file and track" doesn't appear in the top of the audio editor window ! I can just make no destructive data, I have no access to Normalize and others audio fonctions ! could you help me ? in advance I thank you
Alain

'onglet' - great, my favorite when visiting restaurants in France!
Anyway, I think you have to activate Advanced tools first:
http://help.apple.com/logicpro/mac/10/#lgcp5cbf192f
Have a nice day!

Xfi extreme audio SB0790 Windows Home Premium

I have installed Windows 7 upgrade on an HP desktop that was running XP Pro. Install went fine exept I have an error "No Audio Device Installed"? yet I have installed the Xfi extreme audio card in its slot. The card works fine with XP. I have gone with the windows update installed the current driver with still no luck. Searched the forums again no luck, have done my due diligence via the internet and with beta drivers and still only have the red X everytime I boot. What can I do to get this card working agian?

Re: Xfi extreme audio SB0790 Windows Home Premium0 As I stated in my first post I did my due diligence and after installing beta drivers for the SB0790 then installing the recommended driver dated July 09 it still does not recognize the device (7 Home Premium). I have gone through every forum google points me to we are not alone, taking advice I've installed then deleted these drivers about 0 to 20 times I've tried compatibility mode "Vista" "Vista SP", "Vista SP2", "XP", and so forth with no luck also running the driver as admin. Every time I update driver in 7 it tells me I have the current driver yet I have a red X and no sound.
I can't believe that Creative does not have working drivers for the final release of 7 knowing that they had 6 to 8 months to prepare. Really poor on their part.

Audio Mixer Window Does Not Appear

I have been using Premiere Elements for years in various versions (current project in V8, just downloaded V9 trial. Tonight I went to use the Audio Mixer function and found that when I click on Audio Mixer in the dropdown menu it does not appear. I then downloaded the V9 trial and have the same issue.
Its hard to believe that I have not tried to do audio mixer functions in V8. But the last time I used the audio mixer in Premiere Elements it was accessed with a small button and worked find. Perhaps that was version 7. I have no memory of when I upgraded from 7 to 8.
Help! Why will the audio mixer window not appear?

I tried to access the Mixer from both the drop down menu below the right side panel and top of the interface on 8.0. Then I loaded 9.0. Same test same result first time around.
Then I read your note and tried both places again and the top of the interface worked in 9.0! Now both locations work in both versions. Weird.
Thanks very much for the response.

OT: looking for Logic Audio for Windows XP

Apologies for the crass request, but I'm looking a cheap copy of Logic Audio that will run on Windows XP. I just found some old Logic Audio recordings I did years ago, but I've lost my LAGW 4 CD, and in any case, I'm not sure if LAGW 4 even worked on Windows XP .... I've come to love Macs at work, but I haven't saved enough to make the move at home.
Thanks,
Kevin Murphy

I assume the key you refer to is analogous to the dongle I have for LAGW, and it sounds as if you are not willing to part with yours . I don't care much about stability, since my main interest at the moment is to do an audio track dump (with edits) and MIDI export so I can continue working in Cubase in the near term. Contact me at [email protected] if you are willing to help me out. Otherwise, I'll keep looking. It's frustrating ... there must be many thousands of people out there with unused copies of Logic Audio for Windows, especially since it was never very stable, even on Windows 95 .

I have several Files created in Logic Audio for windows bfreo v 5 wich can't open in Logic Pro X. Any ideas for a solution to his problem,

I have several Files created in Logic Audio for windows before v5.5.1 which can't open in Logic Pro X. Any ideas for a solution to this problem, The Windows files that were created in v5.5.1 open OK. I lost my XS key during a recent house move so can't update to windows files before trying to open in Logic Pro X
Swingtones

If you can open the windows files in windows you can bounce the tracks out as audio. Then load them in X

Can't output Digital Audio in Windows 7 (Macbook Air 2011).

Hi All,
I'm using my MBA 2011 to play 3D Blurays Movies.
The problem is...
> Lion works fine (with HDMI audio) but i can't play 3D Blurays in LION, just 2D Blurays. [I can send...DTS/DOLBY etc etc to my RECEIVER with no problems using the "Moshi mini DP to HDMI adapter".]
> In Windows i can play 3D Blurays (using Power DVD, Corel Win DvD; Arcsoft total media...etc) but i can't use the mini DP digital Audio function as in Lion...(So i think i need a better support driver here....from Intel, Apple or
In the device manager i have an "Intel (R) graphics audio" """device""", but i don't have it listed as a device/extrernal-speaker in Windows interface, i currently have..."just the cirrus logic internal speakersdriver" and the "cirrus logic headphones analog output".
So, anyone know how to output DIGITAL audio using Windows 7 bootcamp?
Best Regards,
Sebastian.

Thanks for your comments. To answer your question theologos, the difference in battery life is huge. I only ran down the full batery in windows and it lasts for a little over 3 hours, depending on how you use it. Fully charged, OS X says I have a little over 7 hours to run although I've never tried to see if it actually gets that much. It seems to last a lot though. I almost never use OS X because I need to do run a lot of windows programs and a lot of statistics in Excel which is disabled by microsoft on office 2011 for mac. Heat levels in windows are acceptable. For general tasks CPU temperature stays below 70 degrees and the laptop is only mildly warm. Even playing starcraft 2 on full settings doesn't cause it to heat up to unomfortable levels.
I realise that graphics switching is disabled in Windows and I hate Apple for it, I know they are doing it on purpose. This is not a question of which OS is better, they both have their merits. However, my guess is this is done via the bootcamp drivers for windows. Since the AMD Radeon 6750 M has graphics switching and is able to perform it with no probs on other non-mac windows laptops I was wondering whether I could remove all the apple graphics drivers and install the default AMD ones. I'm specifically referring to the catalyst driver ackage off the AMD website for this graphics card. If the hardware is there and there are drivers for windows why would it not work on a Mac? If I were to format the system and simply install Windows how would the macbook pro know to keep the integrated graphics disabled? My worry is that if I install the AMD drivers and remove some of the bootcamp ones this might screw up bootcamp if it doesn't recognize them. Anyone tried to do this with any success?

Problem Disabling Beats Audio w/ Windows 10

Hi - I have problem with Beats Audio Control Panel after upgrade windows 8 .1 to windows 10. I updated the audio drivers which didn't solve the problem.
Product Name: Hp Pavilion dv7-7051swProduct Number: B6G49EA#AKD Driver Versions:IDT High Definition Audio CODEC - 6.10.6491.0
Intel(R) Display Audio Driver - 6.16.0.3154NVIDIA Virtual Audio Driver - 1.2.30.0 I tried also reinstall this driver but it didn't help.
It's propapbly the same issue as here:http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Problem-Disabling-Beats-Audio-w-Windows-8-1/m-p/3208867#M43609 Thanks for any help.DMaster

Hey, I had the same problem as you and solved it. Product Name: HP ENVY 15 Notebook PC
Product Number: J0C48EA#AB9
OS: Windows 10 Home 64-bit While using Windows 8.1, what I did to disable the Beats Audio Control Panel was to update the driver to the generic High Definition Audio, as this guy shows:
https://goo.gl/0XN7Nl When I upgraded from Windows 8.1 to Windows 10, the new OS started using the IDT driver, enabling the Beats Audio Control Panel.
I've tried to do the same under Windows 10 but there was Generic Audio Driver a.k.a. High Definition Audio Driver available. This is what I did:
1. Download, install the High Definition Audio Tool from Microsoft Hardware Dev Center, and restart your PC. This is the generic audio driver that was missing:
http://download.microsoft.com/download/4/8/D/48D7ED36-832B-41D7-AE0A-04AD7D8CA837/HdauSetup_x64.msi
https://msdn.microsoft.com/en-us/library/windows/hardware/Dn613936(v=VS.85).aspx 2. Open Device Manager -> Sound, video and game controllers
3. Righ Click Menu over IDT High Definition Audio CODEC and select Update Driver Software
4. Choose Browse my computer for driver software
5. Choose Let me pick from a list of device drivers on my computer
6. Choose High Definition Audio Device
7. Select Yes in the Update Driver Warning 8. The High Definition Audio Codec is installed and the Beats Audio Control Panel disabled Now I can hear all my music again without the awful Beats Audio effects and volume variations that are a nag.
Hope this helps you out. Thank you. hitek81

Problema con el controlador de Dolby Advance audio en Windows 10

Acabo de pasarme de W8.1 a W10, y me da error que Dolby Advance audio con un controlador. Mi Laptop es una G400s.Cabe recalcar que soy nuevo, no sé si estoy poniendo bien este tema.

Hola Bloody que tal,
El dolby esta asociado a la versión de tu controlador de audio, al instalar una nueva versión del controlador el problema comienza, tu ordenador no tiene controlador de audio para Windows 10 así que la recomendación es eliminar el dolby (des-instalar) ir a administrador de dispositivos para des-instalar el controlador de audio reinicia el ordenador, posteriormente Windows volver a instalar el controlador de audio pero sin el dolby este controlador debe funcionar, te recomiendo verificar las actualizaciones de Windows por existen descargas de controladores.
Un saludo.

How to unlock audio regions in audio bin window?

I cannot get some of my audio regions to unlock in the audio bin window. Page 292 of the manual explains that regions can be locked in the audio bin window to prevent unwanted alterations to start point, end point or anchor position. But when I open the audio bin window, some of the regions will not unlock. I am in the proper place, the audio bin window--I know you cannot unlock regions in the bin without opening the region in the audio bin window. Can anyone explain why some regions won't unlock? Thank you.

Thanks for the reply, but SMPTE lock seems to have no bearing on it. SMPTE is not locked, but the audio region still won't unlock in the audio bin window. These are audio regions I'm working with, not loops. I've been trying to get an answer to this for a long time. Hopefully something will come along.

Unlock clock source: audio midi window

Friends,
Good afternoon to you all.
I am having an issue with optical input of my Mac Pro, using it for recording via Logic Pro 9
I use the digital output of my Axe-Fx into the Optical In of the Mac Pro (5,1 - Quad Core 2.8 Ghz)
The axe fx sends its output at the rate of 48Khz, while the Mac Pro is able to input signals at 48Khz.
However there was significant latency while using logic pro...upto 2 seconds.
I fired up the Audio MIDI window, and tried to set the rate to 48Khz.
However, after a couple of seconds, the rate falls down to 44Khz.
During that time the rate remains at 48Khz, there is no latency.
I disconnected the toslink cable and tried...but to no avail..
the rate keeps falling back to 44Khz
What am i missing here?
(I only recently shifted to this route of recording as i previously used to use a USB interface.)
dinesh

Friends,
Good afternoon to you all.
I am having an issue with optical input of my Mac Pro, using it for recording via Logic Pro 9
I use the digital output of my Axe-Fx into the Optical In of the Mac Pro (5,1 - Quad Core 2.8 Ghz)
The axe fx sends its output at the rate of 48Khz, while the Mac Pro is able to input signals at 48Khz.
However there was significant latency while using logic pro...upto 2 seconds.
I fired up the Audio MIDI window, and tried to set the rate to 48Khz.
However, after a couple of seconds, the rate falls down to 44Khz.
During that time the rate remains at 48Khz, there is no latency.
I disconnected the toslink cable and tried...but to no avail..
the rate keeps falling back to 44Khz
What am i missing here?
(I only recently shifted to this route of recording as i previously used to use a USB interface.)
dinesh

Audio adjustment window disappeared

i have been working in imovie '08 and one day my audio adjustment window was there and the next it wasn't. Any ideas? i am a rookie and honestly don't know much about this computer, so any help would be great! thanks!

The only thing I had done right before this issue arose was this:
As this was clearly becoming large project I bought a 2TB RAID drive to dedicate to it. The entire project was on a smaller, more congested drive. I hooked up the RAID and moved the entire project over to it. I changed no file names and FCP was not running when I did it. I put the original Events/Project folders in a new folder so as not to confuse FCP when I relaunched it. FCP itself and all its ancillary files remained in place on my system drive.
When I opened FCP everything was fine and I even did some work on the project. It wasn't until I stepped away from it and then returned that I lost first the audio meters, then the scrubbing buttons and now--new revelation--many clips in the Events library claim to be missing. It's as tho this project is slowly, incrementally dissolving!
An odd twist: I just switched back to the original version of this project thru the various folder swaps necessary and the job, its cilps and the audio functions are back in place. Can't understand this. The Project/Events folders of the respective versions have identical contents. (except for that small bit of work I did right after the move)
At present, the audio functions have returned in full but the clips remain reported as missing. As a side note, another major ongoing project, the folders/files of which were not touched, remain fully functional in FCP.
I'm at a loss.

Audio Recording Window Size

Has anyone figured out how to resize the audio recoding window in Captivate? It would be great to make the window as large as necessary to display all the notes without having to scroll.
Rusty

Hi Rusty
This is one of the tips in my Tips & Tricks eBook.
Look at the area where you see the notes. See the gripper icon? Looks like four dimples.
Click and pull to create a resizable floating window.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Audio meters window disappeared

Subject line pretty much states it. I launched FCPX this morning to and suddenly the audio meters window was blank; like the space for it was in the window layout but it was blank gray. I went to the Windows menu and the selection was Hide Audio Meters. Were I to select it the blank area would slide away just as it should. Select Show Audio Meters and the blank window reappears.
I've restarted the app several times; restarted the computer. Didn't help.
Thoughts?

The only thing I had done right before this issue arose was this:
As this was clearly becoming large project I bought a 2TB RAID drive to dedicate to it. The entire project was on a smaller, more congested drive. I hooked up the RAID and moved the entire project over to it. I changed no file names and FCP was not running when I did it. I put the original Events/Project folders in a new folder so as not to confuse FCP when I relaunched it. FCP itself and all its ancillary files remained in place on my system drive.
When I opened FCP everything was fine and I even did some work on the project. It wasn't until I stepped away from it and then returned that I lost first the audio meters, then the scrubbing buttons and now--new revelation--many clips in the Events library claim to be missing. It's as tho this project is slowly, incrementally dissolving!
An odd twist: I just switched back to the original version of this project thru the various folder swaps necessary and the job, its cilps and the audio functions are back in place. Can't understand this. The Project/Events folders of the respective versions have identical contents. (except for that small bit of work I did right after the move)
At present, the audio functions have returned in full but the clips remain reported as missing. As a side note, another major ongoing project, the folders/files of which were not touched, remain fully functional in FCP.
I'm at a loss.

No audio in Windows 8.1 =(

Similar Messages

Maybe you are looking for