NO AUDIO in wmp because of updated driv

This subject has been brought up many times, but I can never seem to find an answer for it... Had updated an audio driver for my sound card, and every other media player BUT
wmp is operable. Tried services.msc and stopped and started Windows Audio
services, although I heard audio one time only. Rolled back the driver,
heard sound, but my soundblaster card won't function properly without the
updated driver for some reason. How ironic that only wmp player won't produce any audio and being THE standard media player for Windows OS. What can I do to correct this problem?! Tired of rolling back. Like the upgrade very much. Real Player or I-tunes is ok, but why should I have to change because of something like this. Creative conspiracy, perhaps?

Amplifiers. You are not clear when outlining this distressing problem how the speakers themselves work. At my office all the rooms are equipped with plugin speakers, but the Mac's output has inadequate power for them, so I use a set that has its own power unit.
However, from the initial question you posted, can you confirm that normal headphones do not work (or was that one of your -- correct -- test methods to analyse this)? If that is so, there may be other problems. If you have an iPod, try the earbuds for that.

Similar Messages

Your firmware can not be updated because the hard drive...SMC 1.3

Hi all !
I have a problem. I'm have a macbook pro Santa Rosa =
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B03
SMC Version (system): 1.27f1
This morning I saw the update for the SMC firmware (1.3).
Before restarting, I have this error :
http://img411.imageshack.us/img411/6606/26048579.jpg
Your firmware can not be updated because the hard drive partition scheme may not be supported. You must be booted from a GUID partiton or RAID scheme.
When I went into Disk Utility in order to check, here is what I have =
Name : FUJITSU MHY2200BH Media
Type : Disk
Partition Map Scheme : GUID Partition Table
Disk Identifier : disk0
Media Name : FUJITSU MHY2200BH Media
Media Type : Generic
Connection Bus : Serial ATA 2
Device Tree : /PCI0/SATA@1F,2/PRT0@0/PMP@0/@0:0
Writable : Yes
Ejectable : No
Mac OS 9 Drivers Installed : No
Location : Internal
Total Capacity : 186.3 GB (200,049,647,616 Bytes)
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 0
I thought Boot Camp could be involved becauseI know it's the only thing related to the EFI.
I searched on internet, and Ifound nothing. There was a solution in order to reset the partition table, but the tool is no longer available. The link on on the application explains that I have to reformat my macbook pro. I find a bit weird to make this , I can't spend hours for backup / restore just because the SMC update does not work. have you any lead for me ?
Thanks ,
Razique

Have you tried this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Beats audio quit working after updating driver

beats audio quit working after updating driver. Updated IDt driver and now now soundd. how to fix?

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
Go to Control Panel,Programs & Features-Uninstall IDT software and restart the laptop.Next install using the downloaded file.
```````````````````````````````````````
If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Cannot install audio driver because Microsoft bus driver should be installed

hello!
I have a satellite serie A laptop. When i try to install audio drivers it says "Microsoft bus driver should be loaded before installing Realtek High definition audio driver".
I've downloaded KB835221 and kb888111xpsp2 uplods and they should fix the problem, but they didn't. what should i do now?

Hello Jan
I presume you want to install your own operating system (probably WXP Pro) only thing you must do is to install all drivers and Toshiba designed stuff in right order. I dont know which notebook model you have exactly but check if you can find installations instructions document.
If you have newer unit A series be sure that WXP contains SP2.

WebGL Renderer & GPU Accelerated Windows Blocked for your Graphics because of unresolved driver issues

I am using Windows XP SP 2. My mother board is ASUS F1A55-MLX Plus, Processor: AMD A4-3400 APU with Radeon HD Graphics 2.70 GHz, 2GB DDR3 DIMM 1333 MHz RAM and 500 GB SATA HDD. I am using FF version 8. However, on some websites I cannot see the whole page on my 15" CRT Samsung color monitor. For the fact the slider at the bottom of the web page is not visible to move further left or right.
At '''Trouble Shooting Information''' the contents are detailed below:
Application Basics
Name
Firefox
Version
8.0
User Agent
Mozilla/5.0 (Windows NT 5.1; rv:8.0) Gecko/20100101 Firefox/8.0
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Crash Reports
about:crashes
Extensions
Name
Version
Enabled
ID
Modified Preferences
Name
Value
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.buildID
20111104165243
browser.startup.homepage_override.mstone
rv:8.0
browser.tabs.warnOnClose
false
extensions.lastAppVersion
8.0
gfx.blacklist.direct2d
3
gfx.blacklist.layers.direct3d10
3
gfx.blacklist.layers.direct3d10-1
3
gfx.blacklist.layers.direct3d9
3
gfx.blacklist.layers.opengl
3
gfx.blacklist.webgl.angle
3
gfx.blacklist.webgl.opengl
3
network.cookie.lifetimePolicy
2
network.cookie.prefsMigrated
true
places.database.lastMaintenance
1327382612
places.history.expiration.transient_current_max_pages
47671
privacy.donottrackheader.enabled
true
privacy.sanitize.migrateFx3Prefs
true
privacy.sanitize.sanitizeOnShutdown
true
Graphics
Adapter RAM
Unknown
Adapter Drivers
vga framebuf vga256 vga64k
Adapter RAM (GPU #2)
Unknown
Adapter Drivers (GPU #2)
Unknown
WebGL Renderer
Blocked for your graphics card because of unresolved driver issues.
GPU Accelerated Windows
0/1. Blocked for your graphics card because of unresolved driver issues.
'''Enabled Plugins'''
Shockwave Flash
File: NPSWF32.dll
Version: 11.1.102.55
Shockwave Flash 11.1 r102
MIME Type Description Suffixes
application/x-shockwave-flash Adobe Flash movie swf
application/futuresplash FutureSplash movie spl
Shockwave for Director
File: np32dsw.dll
Version: 11.6.3.633
Adobe Shockwave for Director Netscape plug-in, version 11.6.3.633
MIME Type Description Suffixes
application/x-director Shockwave Movie dir,dxr,dcr
Windows Media Player Plug-in Dynamic Link Library
File: npdsplay.dll
Version: 3.0.2.629
Npdsplay dll
MIME Type Description Suffixes
application/asx Media Files *
video/x-ms-asf-plugin Media Files *
application/x-mplayer2 Media Files *
video/x-ms-asf Media Files asf,asx,*
video/x-ms-wm Media Files wm,*
audio/x-ms-wma Media Files wma,*
audio/x-ms-wax Media Files wax,*
video/x-ms-wmv Media Files wmv,*
video/x-ms-wvx Media Files wvx,*
Microsoft® DRM
File: npdrmv2.dll
Version: 9.0.0.3250
DRM Netscape Network Object
MIME Type Description Suffixes
application/x-drm-v2 Network Interface Plugin nip
Microsoft® DRM
File: npwmsdrm.dll
Version: 9.0.0.3250
DRM Store Netscape Plugin
MIME Type Description Suffixes
application/x-drm Network Interface Plugin nip
'''about:buildconfig'''
Source
Built from http://hg.mozilla.org/releases/mozilla-release/rev/d03b51a9b2bd
Build platform
target
i686-pc-mingw32
Build tools
Compiler Version Compiler flags
d;D:\mozilla-build\msys\mozilla-build\python25\python2.5.exe -O e;D:\mozilla-build\msys\builds\moz2_slave\rel-m-rel-w32-bld\build\build\cl.py cl 14.00.50727.762 -TC -nologo -W3 -Gy -Fdgenerated.pdb -we4553 -DNDEBUG -DTRIMMED -Zi -Zi -UDEBUG -DNDEBUG -GL -wd4624 -wd4952 -O1
d;D:\mozilla-build\msys\mozilla-build\python25\python2.5.exe -O e;D:\mozilla-build\msys\builds\moz2_slave\rel-m-rel-w32-bld\build\build\cl.py cl 14.00.50727.762 -TP -nologo -W3 -Gy -Fdgenerated.pdb -wd4800 -we4553 -DNDEBUG -DTRIMMED -Zi -Zi -UDEBUG -DNDEBUG -GL -wd4624 -wd4952 -O1
Configure arguments
--enable-application=browser --enable-update-channel=release --enable-update-packaging --enable-jemalloc --enable-tests --enable-official-branding

@mha007. I was able to update to version 10.0.1 via Help > About Firefox. Like John99 says it was updated a couple of days ago. However, the problem of WebGL and GPU still remains. I have asked my system supplier to check the same.
@zerofire. I have always built my computer and 'am a great fan of AMD. I hate Intel's blue Death Signs. We here in India do not like anything automated on our PC other than antivirus and antimalware along with pre-scheduled running of CCleaner and Defraggler. Once in a while I run CCleaner's Registry Cleaner. Even Windows Security Alerts are turned off. Windows XP and SP2 for PC and Windows 2000 for server are the most used. Not interested in SP3 or Vista as the transcription work I do requires me to just have XP or SP2. May later add on Windows 7 via dual booting.

Choppy, distorted audio on Portege Z930 after updating from Win7 to Win8 64

Just wanted to share an info with you which cost me some time to work out, regarding the audio playback on a Portege Z930.
When I got my brand new Z930-14L, it was running Win7.
I tested everything like you do when you get a new machine and it all worked fine - including audio playback.
When I updated to Win8-64 from the CDs that came with the computer, still everything seemed to work fine and I had not changed any driver or setup.
However, after a couple of minutes, the audio playback detoriated. It got choppy, distorted, interrupted, stuttering and I was shocked.
Funnily, as soon as I turned my attention to the computer again, playback was OK again - though no screensaver had come up and no power save mode came up in such short time. I knew it was no hardware issue (because it worked under Win7), it was not a driver issue (because the first 5 minutes the sound was immaculate), it was not a ground loop (as many have suggested) because that sounds differently.
Thanks to another forum, I found out that it is actually the combination of Windows Defender, Win8-64 Pro and the audio driver that causes this. If the device is idle for some minutes, Defender thinks its a good idea to use the idle time to scan the SSD drive - causing inteference with the audio playback. Of course, you cannot simply disable or switch off the central antivirus process, which would kinda ruin the whole point. :-)
_So I installed Kaspersky suite on the machine (which automatically disables the Windows Defender) and the issue was gone!_ This is probably the only time that installing an antivirus suite FIXES an issue. :-)
BTW, this is probably not limited to this particular antivirus product, just play a bit with Defender.
Best, Yuppie

>So I installed Kaspersky suite on the machine (which automatically disables the Windows Defender) and the issue was gone! This is probably the only time that installing an antivirus suite FIXES an issue.
Thank you very much for sharing this details here in the community.
I guess information could be useful for others who have such similar sound problems.

Zen Micro firmware CIRCLE -Can't update firmware w/out driver, can't update driver w/out firmwa

Hi,
I know lots of peopl are having the same problem. I have a Zen Micro 5Gb. I have previously updated the firmware to the plays for sure (about 2 years ago) and it's been fine.
The device had had the hard dri've replaced after it failed, and I need to reload the firmware. I have all the files, I've read all the FAQ and support I used last time (I keep everything) and my notes from 2 years ago say it was easy.
However. Not now. I figure WMP caused a lot of problems. Right - got that out the way. Fresh installs of XP SP2 is the way to go.
I have also followed the instructions here:
http://http://forums.creative.com/showthread.php?t=3478
But, I keep going round in circles. Can't update firmware without driver, can't update driver without firmware.
Any driver install I try asks me to connect the device to complete the installation, but, it won't recognise the device because there is no firmware. I try to upload the firmware, and it says there is no device (because there is no driver).
I have tried multiple machines, with SP2 installed and only WMP9 (never had WMP0).
I have tried USB , 2, hubs, front ports back ports, again on multiple machines.
I've even used an XP install on VMware on a MAC (This was the closest to success).
On the Mac, The player was recognised even in its flash problem state and I could actually start the firmware update. However, it failed to complete successfully.
Has anyone actually managed to do a firmware update on n old Zen using a 2008 PC? Please help!

If your player had PlaysForSure firmware, you'll need to download a PlaysForSure firmware version. That should resolve your issues since PlaysForSure does not use a Creative driver but rather a nati've Windows driver. But you will need to have WMP0 installed, WMP9 does not support PlaysForSure.

My iphone 5 is not being recognized by itunes is it because i updated to indows 8.1

my iphone5 is not being recognized by itunes, is it because i updated to windows 8.1?

Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.

Linking Soundtrack Pro to audio files stored on an external drive

FCP user but using SP for the first time. I have the large sized audio files stored on an external drive which at the moment I can't access from within SP. Just wondering the best way to link to the audio files?

I actually use the 'save as' function that consolidates all the audio clips and move them onto a separate drive. I'm doing a lot of large projects that have more clips than are actually used. Consolidation means I can move and work on another machine. And in the end it's easier to archive this single directory of files. Works for me, especially because sometimes the audio sources are scattered in too many places on my system.

My Mac OSX is coming up with error message when i try to write a disc "The disc can't be burned because the disc drive is not accessible (error code 0x80020020)." Same also when I tried my external disc writer-any clues?

My Mac OSX (version 10.7.5) is coming up with error message when I try to write a disc "The disc can’t be burned because the disc drive is not accessible (error code 0x80020020)." I have tried several discs with the same message - Same also when I tried my external disc writer. Both disc drives will read my discs that have music or photos on it, it just won't write any new discs - any clues?

Hi Klaus1
So, I tried all the suggestions and followed the links - all to no avail.
as you can see, (screenshot below) my iMac is a 21.5 inch late 2009 model which isn't showing in the updates listed above
My system report shows that my Mac has the following:
I reset the PRAM and the SMC - still have the same error message when I try to burn discs. I've used both CD's and DVD's and tried with my external Discwriter too.
Any further suggestions??

No audio from speakers or jack. Sound bar shows audio activity. All drivers updated. HP G62.

I cannot get audio from the speakers or audio jack. All drivers updated, realtek, BIOS F37.
There is activity on the windows sound bar (green level moves) when music is played, however no audio is executed.
HP Support Assistant software was installed, but no detection of the problem.
No warranty since March 2011
I will deeply appreciate any support or guidance to solve this problem. Thank you very much in advance.
RB
Product: HP G62 Notebook PC
Serial Number: [Personal Information Removed]
Product Number: WA912U#ABA

Hi vc329,
Doesn't sound like encouraging news, though it is odd that the sound came back for a short while at least. If you still haven't rebooted the PC since putting it to sleep and loosing the sound, then I would suggested going ahead and rebooting or even doing a full hard reset (power down, remove the AC adapter, remove the battery, hold down the power button for 20 seconds or so, then reconnect the AC power and Battery and boot up) to see if the sound can be recovered again.
If the sound still doesn't work, Check Device Manager to see if the sound driver still looks OK, make sure you are using the latest driver again (it looks like the latest driver is 6.10.6381.0), another option might also be to try the older driver that is still available from the site, or try recovering the original driver shipped on the PC. The steps to do these things are covered in the document listed below, in Step 6 (Restoring the Audio Driver), Step 7 (Updating the Audio Driver), and Step 8 (Checking Device Manager):
No Sound from the Speakers (Windows 7)
If none of that seems to help, I'd recommend testing the hardware using Step 9 in that document.
If the online warranty check sees you as out of warranty, you may still be OK if you have the original proof of purchase (receipt) from wherever you purchased the PC, but you may have to provide it when calling HP for service if the sound can't be fixed. If you are close to the end of warranty I'd recommend calling customer care for your area (I assume you are still in Asia) and validating the warranty with them as soon as possible just to make sure.
Although I am an HP Employee, I am speaking for myself and not for HP.

If i Update Driver my pc facing Hang problem..

My pc configurations:
mother board : MSI p45 Diamond
Processor : Intel Quad Core Q9500 12M 2.83G
Graphics : MSI GeForce 8800GT, NX8800GT-T2D1GE
Windows Vista 64 bit
Now i m using vista 64 bit windows..My problem is If i download My graphics card update Driver from Nvidia site and after install it my pc facing Hang problem..and if i reinstall my old driver (which i get from the card) my pc performance well..I also not get xp 64 bit driver with my graphics card...so i also download xp 64 bit driver from net and install it..and facing the same hang problem..Only my old driver work well..Now i want to use xp 64 bit windows..because of driver i cant use it.....pls help me how I Solve my problem..
Thanks
Chinmay

Quote from: chinmay on 15-October-09, 22:35:08
I have no experience about Flash BIOS...Can i Flash it Using Live Updates??..
>>Use the MSI HQ Forum USB flasher<<

Windows 8.1 and AMD Catalyst updated driver- HP Envy 17t-3200

I've updated my HP Envy 17t-3200 to Windows 8.1Pro. Ran into a some issues but I was able to find a fix (ie. brightness-dimming button fix). Now I just found out my steam game, NBA 2K14 won't work using switchable graphics I was using windows 8 with nba2k14 with switchable graphics and set to high performance and the game played smoothly but after I installed windows 8.1 now my NBA2k14 still plays but in low graphics (power saving) and if I set switcable graphics to high performance I only get a black screen with audio gameplay in the background. Need help! I downloaded the latest drivers in the HP support website, Released:2012-10-18 File name: SP58812.exe [1/1, 298.3M] Version8.982.6.0 Compatibility:Microsoft Windows 8 (64-bit) I'm hoping an updated driver comes out soon for Windows 8.1. Is there a fix out there besides waitiing for the updated driver? All my other games work flawlessly though.

i have the same problem before in windows 8 running smoothly but now i upgraded to windows 8.1 pro when i use switchable graphic the screen goes black only sounds please help

Sound Blaster Audigy 2: Can't install updated drive

Creative Media source was getting a error and disallowed me to access the EAX console.
So i did a clean sweep and uninstalled Audigy 2 and its components (Media Source etc).
With that i lost my updated drivers. I resently downloaded a updated driver from this site
Audigy2/2 zs Web update WDM. But... when i try to run the setup for the update i get this errror:
Setup did not detect a driver version supported by this web update: The installation will now close.
also another file from a different source:
Setup could not find any previous version of Sound Blaster Audigy 2 Web Update WDM Drivers
Installed.
My sound card is obiviously a Audigy 2. It displays this information:
Creative Audigy Audio Processor WDM (CF00)
Driver Version 5.2..328 (Version from the Installion CD)
Please help me get new Drivers!!!

letoon wrote:
i have the same problem and the driver package that reports this stupid?error is SBA2_PCWDRV_LB__84_55-R.exe?so first the web autoupdate detects the card and recommends a critical driver update to dl which then reports that it can't find the card (sb audigy 2) ?how to update then?
You can't install this if you have not install the EAX4 driver first. Read the detail information in those download page first.

On my itunes library my albums are all sorted but when i put onto my ipod touch (4th Gen) it seems to duplicate i have checked everything and there are no spaces in the information my question is how do isort it because these things drive me mad

on my itunes library my albums are all sorted but when i put onto my ipod touch (4th Gen) it seems to duplicate i have checked everything and there are no spaces in the information my question is how do isort it because these things drive me mad i would be most gratefully if you could find a way to help
thatnks

Never mind, got it to work. I stumbled around on Google for a while and somehow ended up reading things from the 'jailbroken' community. They had easy instructions to get out of Recovery mode. Thanks anyway though!
P.S. For anyone who experiences this, here is the fix: Hold Power and Home in unison for 6 seconds, then power on as normal.

NO AUDIO in wmp because of updated driv

Similar Messages

Maybe you are looking for