No Audio Key Frames Added When Using Track Mixer

Yesterday this worked fine today not.
I edited the video from a live panel at Comic Con. The audio was recoded on a Sound Devices 8 track recorder.
After the picture was edited I added the 6 tracks of audio to do the audio mix using the track mixer as I always do.
I set all tracks to write and lowered all the faders all the way down then as the timeline played I brought up one fader on the presenter and after a few moments I stopped the time line. All channels go to touch I move the scrubber back to before I started to raise the fader and played back, nothing. No audio no fader movement. When I look at the Show Key-frames,Track Key-frames I see no key frames added.
Any one have an idea?
I edited a panel yesterday in the same project different sequence same settings with video and audio recorded the same way it work fine.
Thanks
Dennis
Well I found out how to fix it. Make a new Sequence copy my edited clips into it, add the audio and now it works right.
It looks like the sequence got corrupted so just creating a new one fixed the problem.
I have seen problems with corrupted sequences before but not  causing key frame write issues.
Just a side note I also earlier had red frames showing up that usually mean dropped or bad frames but after restarting the program that went away.
By the way this was with CC 2014
I will mark this answered

The in and out points, unless changed, are set for the whole sequence. The automation will not write if this in to out area does not included the mix section. It might be that the in/out area of your first sequence was incorrect but this was fixed when you made the new sequence.

Similar Messages

  • Audio Key Frames Scrambled On Import From P Pro

    I'm importing three audio tracks from Premier Pro 5.5 into Audition, and each audio track may contain several dozen separate clips.
    On some tracks I loose all my audio key frames, and the "rubber band" has snapped
    to the bottom and the track has no output. On other tracks, I'm loosing about a third of the key frames, poof, gone. In some cases, the key frames have been moved around within the clip,
    say I created a fade up at the beginning with two key frames, and after import the first key frame, at -00 db, has moved ahead five seconds, and the second key frame is
    at the proper level, but also has been slid over five seconds. Other key frames randomly drop to -00 db from where they originally were.
    In P Pro I adjust my audio automation by setting key frames and moving the "rubber band". I then export by Edit > Edit In Audition > Sequence and check the "Send
    Clip Vloume Key Frames" box, and un-check the "Render Audio Clips Effects" box. In the P Pro timeline I have not seclected any individual clips or tracks, I don't
    believe I need to.
    A multitrack session opens in Audition, and my key frames are scrambled up.
    Using Mac Pro with OS 10.6.8 , P Pro 5.5.2 and purchased the CS 5.5 Creative Suite last December
    Thanks in advance for any help that may keep me from going nuts    Tom/ Miami

    Thanks for the reply and I do apologize for some of the newbie questions, I downloaded MPEG StreamClip and attempted the convert. 
    I have to admit the following QT movie inspector details of my original video are below and play fine in QT but once I convert the video appears choppy at times almost as if clips are being dropped?
    Is my default format simply not compatible?
    If not then what would you recommend my settings be in MPEG Streamclip to export without any choppiness?
    Again I do thank you for your help!!!!

  • Is there a way to adjust the frame length when using a FFT

    Is there a way to adjust the frame length when using a FFT?
    Thanks,
    David

    I thought that to have a longer frame rate you just need to have a longer sample set.

  • Motion 3 crashes when using Track Points. (Add Behavior/Shape/Track Points)

    Please Help!!
    Motion 3 crashes when using Track Points.
    First I make a shape and apply the behavior.
    Clicking analyse shows its renderbar, but stops and motion crashes.
    Thank you.
    Huig
    Mac Pro/2.66 Ghz/3Gig/Aty Radeon X1900   Mac OS X (10.4.9)  
    Mac Pro/2.66 Ghz/3Gig/Aty Radeon X1900   Mac OS X (10.4.9)  

    Robert Kleindienst1 wrote:
    I have two objects moving in a video and want to attach a line shape between them....
    Have a look:
    two circles, a 'dot' applied to each, the dots are moved by a behavior to rotate....
    The line connecting them. is a bezier
    no Motion Tracking needed
    Just dragging the dot into the TrackPoint's dwell
    And:
    Select which points are tracked - see the red arrows:

  • IPod nano 6gen does not send audio to home stereo when using an older (iPod classic) dock.

    iPod nano 6gen does not send audio to home stereo when using an older (iPod classic) dock.  Is this a functional discount or something else?  [This system has worked with iPod Classic and Nano 4 gen.]

    Perform the instructions for your version of Mac OS X on this page.
    (15457)

  • Way to control audio key frames across multiple tracks in one fell swoop?

    Hi everybody. Let's say I have 5 layers of audio, and I want to key frame levels and fades across all of them. Is there a way to sync the tracks such that, any changes I make to one will apply to all? Ala, the way one makes changes to both tracks in a stereo pair in one fell swoop.

    Nest the sequence and make the moves on the resulting "mixed-down" audio. All audio should appear as a simple stereo pair in the nest. Adjust here.

  • Trim mode 'wrong frame' problems when using merged clips

    Hello there,
    We are having a problem with the trim mode on FCP 6.0.4. We're working with 1080psf 24 Apple ProRes 422 material, captured using a AJA Kona card.
    The sound and picture were recorded separately, and synced manually (by creating merged clips) in FCP.
    When we go into the trim window, it shows a different frame as the incoming or outgoing frame on some clips. In other words it's not actually showing us the real frame before or after the cut. Instead it shows a frame that's half a second back, for example. When we preview the cut, it cuts in the 'right' place, but when we pause and try to fine cut the transition using +1 keys (or trim back/forward keys), it shows us the wrong frame. When we preview it again, the cut is still in the 'right' place - not the frame represented when it's stilled. This makes using trim mode nigh-on impossible since it's not actually showing you the frames you're cutting.
    Are there any patches or workarounds to fix this issue? I can't find any fixes on forums/help sites or the FCP manual.
    Tried trashing prefs, repairing disk permissions and all the usual maintenance stuff!
    Exporting new Quicktimes of the merged clips and then re-importing them is not an option, as they need to be timecode accurate to be recaptured for the online and vfx work.
    Any advice would be much appreciated - if no solutions exist we'll have to switch everything over to Avid, and that'd be a mammoth job.
    Many thanks in advance!

    You may not be zoomed in enough in the Timeline window, the more you zoom in, the more detailed edit you can perform. Zoom out too much, and you won't have the sensitivity.

  • PPro CC crashes when using Track Select tool

    This is probaby the most bizzare bug i have encountered so far - everythig works - i can scub, play and adjust footage, apply effects, titles and time remapping, but when i select Treack Select tool and click on the timeline, Premiere Pro crashes.
    This is a new develpment as well - i was able to use PPro CC just fine since i installed it (trial version), until yesterday.
    No new applications or updates for Windows, Nvidia card or Adobe were installed lately, but all drivers are up to date (according to various update managers)
    Premiere CS6 works fine with the same sequence (mixed RED and DSLR footage)
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    Adobe Premiere Pro.exe
      Application Version:    7.0.0.342
      Application Timestamp:    5176598d
      Fault Module Name:    ntdll.dll
      Fault Module Version:    6.1.7601.17725
      Fault Module Timestamp:    4ec4aa8e
      Exception Code:    c0000005
      Exception Offset:    0000000000052fc6
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    1033
      Additional Information 1:    1ce0
      Additional Information 2:    1ce04770b02f823ff20b7f82076eba51
      Additional Information 3:    c192
      Additional Information 4:    c19212ee5e1e8407cb093e848f6cb5d8
    System specs:
    Creative Suite CS6 subscription
    Creative Cloud trial
    Windows 7 x64, SP1
    Nvidia Quadro 4000 GPU
    i7-3039k CPU
    32Gb of RAM
    thank you

    Yep, buggy project..
    New project with same and different footage works fine
    Other project created in CC works fine
    Imported sequence from CS6 works fine
    Imported sequence from a buggy CC project into a new project causes crash on using Track Select tool
    I was able to revert the project in question to CS6 via Final Cut Pro XML, also works fine (for now, at least), just have to redo some time remapping which didn't come through with XML translation, small loss
    I guess i'll wait few more months before switching to PPro CC, maybe mysterious bugs will be worked out by then
    Thank you for your replies!

  • Office for Mac 2011: Tips for speeding up Word when using tracked changes and comments?

    I run a fresh installation of Office for Mac 2011 (v. 14.4.1) on a brand new Macbook Pro 13" Retina 2.4GHz with 16GB RAM running 10.9.2. The Office package is fully up-to-date.
    I mainly use Word and find that it is extremely slow when I track changes. Documents need not be particularly large - even in a 30-page document after a few pages of tracks typing becomes a pain, in particular in comment bubbles where the text shows up letter-by-letter and only finish several seconds after I've stopped typing. Other programs run at the same time do not suffer from this horrible lag.
    I have searched and seen that this is not uncommon so it appears that Microsoft's coders are not particularly well versed in coding for Mac.
    My question is if other users have found ways to improve the situation, for instance by trashing plists or something like that? This is really driving me crazy
    Many TIA
    Philip

    You might try looking/posting here.
    Microsoft Support – Office for Mac
    Microsoft Support – Office for Mac (2)

  • InCopy CC crashes when using track changes

    Hi
    We have had a lot of problems with InCopy chrasing.
    We are using the package system.
    It seems to happen when clients are using Track changes, they open the file and if i opens in Story mode it just spins and won't works. If ou open it in Layout mode it seems fine but as soon as you go to Story mode it spins again.
    If the track changes are accepted the package will work fine again.
    Does Adobe have any updates for this it's becoming very frustating and clients don't want to use InCopy.
    Thanks
    Louise

    I don't think there is anything specific in the upgrade that addresses tracked changes, sorry.
    If you need to keep a version of the INDD file with all the tracked changes (before you accept them, to reduce problems), then I'd suggest you make a whole new version of the project. Archive the old one with all the tracked changes intact, and wipe out the tracking markup by accepting all changes in the new doc.
    1. The ID user makes sure all stories are checked in and up to date (easiest via the Assignments panel)
    2. They unlink all the InCopy stories ... select them in the Assignments panel and click the Unlink icon at the bottom (trash can)
    3. Do a Save As to the InDesign file into a new folder with a new name ("v2" appended, for example, or "_changes-accepted").
    4. In the new file, re-export all the stories to InCopy format, saving them to a new subfolder.
    5. Check out all the stories at once via the Assignments panel
    6. Go to the Type menu and choose Track Changes > Accept All Changes > In This Document
    7. Archive the old INDD file with its linked InCopy files (that have the changes)
    8. Tell users to continue working on the new INDD file.
    Alternatively, InCopy users can export each story showing the tracked change markup to PDF, archiving that for auditors, before accepting all changes.
    AM

  • Enter Key Not Working When Using Text Tool

    For some reason, my enter key has stopped working when using the text tool.  Instead of making a soft return to a new line, it simply commits the type. What is going on here?
    I'm using a desktop and CS3.

    there are 2 enter keys in key board
    if u enter main key board enter, sentence will go to next line
    In case u enter the key  available in  rightside of the key board , in the cluster of numericals, the type tool is committed.

  • Audio Key frames not staying set

    I have three pieces of Smartsound music in my video. I add keyframing (rubber banding) the audio to accomodate a voiceover. After I set the key frames ((about 20) I look back and they have all move positions. I've gone back a reset all the keyframes about three times and each time after I finish, the key frames are all in the wrong position. I have tried repairing permissions, as well as doing a "save as" in FCP...but the problem persists. Any suggestions?

    Forgive me for saying it, but it sounds like possible user error ... certainly keyframes do not usually move all by themselves. But hard to guess exactly how or why these keyframes are moving.

  • Issue about tracking behavior, when use tracker

    when using the tracking behavior, when whe choose to simply click on analyze and when to apply and use a tracker

    The link I provided is the user manual section about tracking.  It has the workflow for stabalizing.
    http://help.apple.com/motion/mac/5.0.5/#motn18190529
    The section on strategies to improve tracking is important, also.
    http://help.apple.com/motion/mac/5.0.5/#motn181912dc

  • Audio key frame jumps

    I'm going through, leveling out my audio by adding audio level keyframes in the timeline. Easy stuff.
    Sometimes when I add one, the line "jumps" down instead of staying at the current level.
    Is there a way to stop it from doing this? It's is time consuming to re-adjust the level after most every keyframe. Thanks!

    Still seems to happen with large audio tracks.
    The Audio Mixer isn't too bad, but I still find it easier on the timeline for initial shouted words and mic bumps and whatnot.
    Besides, the timeline doesn't move during playback, so there's no way of seeing what is coming up, except for doing it repeatedly... where you end up going to the timeline anyways.
    I need to break out the midi controller.. see if I can avoid constantly switching between windows. Ill give it a shot on the next show. (Monday)
    Thanks!
    - Ty

  • Keynote and Audio Idiosynchysies on iPad when using AirPlay

    I have the latest version of Apple TV, iPad, and Keynote. We use it to project video via AirPlay on an Apple TV to projectors, and audio from the optical system of the apple TV to an external sound system.
    My problem is that when I play video files through the included Photo app on the iPad, the volume is at one level. Perfectly set.
    When I embed that same video in a Keynote presentation, it becomes super quiet (over half the volume). The QuickTime inscpector in keynote has it at volume level 10 (max), and I just can't figure out what is going on. Why the different levels?
    The iPad volume level is not changed. The change occurs between the two ways of playing the video file.
    Any ideas on what is going on and how I can fix this issue? I don't want to make two versions of the movie- one with normal sound, and one with super amplified sound just for keynote presentations.
    Help.
    Thanks in advance.
    Z

    You have posted in the wrong forum, this is the Keynote for Mac discussion, post your question in the iWork for iOS discussion.

Maybe you are looking for