No audio no matter what I connect it to...it is an old IPod..maybe it something wrong with it

No matter what I connect my old ipod to, I;m not getting audio...songs play, etc...but no audio.  could it be the connector? 

If you have not already, do a Reset (restart) of the iPod.
http://support.apple.com/kb/ht1320
If that does not help, on the iPod''s display, go to Settings, and select the command to Reset Settings or Reset All Settings.  This puts the iPod back to default settings.
If that does not help, and if all of the songs on the iPod are in your current iTunes library, you can try doing a Restore on the iPod.  The Restore button is on the iPod's Summary screen in iTunes.  This will erase the iPod, reinstall its software, and set it to default settings.  You can then sync content back to the iPod, as desired, and give it a try.
If the Restore does not help either, then the cause is likely to be something on the iPod.  If you tried multiple headphones, it may be a bad headphones jack on the iPod.

Similar Messages

  • My wifi suddenly wont work on my i4s. i already reset network, forget network, restart, and put it in the refrigerator (coz some people said maybe theres something wrong with the heat of wifi inside ). what should i do?

    my wifi suddenly wont work on my i4s. i already reset network, forget network, restart, and put it in the refrigerator (coz some people said maybe theres something wrong with the heat of wifi inside ). what should i do?
    but sometimes, it can read,but wont connect.
    sometimes it even wont read  the wifi .
    sometimes, when it can connect, the password already correct, but it didnt want to connect.
    it suddenly happened, without i changed the seeetinggs or else.
    i read every solutiuon on google., etc2, and tried the way, but it still wont work.
    anyone can help ? pleasee ;(

    This is a totally absurd suggestion, except that it worked for me with my iPad.  Forget the network, then when asked for the password, enter a wrong one.  Try again and enter the correct password.  Good luck.

  • My ipod will not sync album pictures to music no matter what I do there is no album picture on ipod but is on itunes itself

    My ipod will not sync album pictures to music no matter what I do there is no album picture on ipod but is on itunes itself what can I do?

    Hi Squeaky98,
    If you are having issues syncing or viewing album art on your iPod, you may find the following articles helpful:
    Apple Support: Viewing album artwork on iPod
    http://support.apple.com/kb/HT2317
    iPod: Artwork missing from songs
    http://support.apple.com/kb/ta38085
    Regards,
    - Brenden

  • Just got an Ipad and am working on setting it up.  the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if the settings are wrong or if there really is something wrong with my Ipad.

    just got an Ipad and am working on setting it up.  the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if I have a setting wrong or if there really is something wrong with my Ipad.  any help would be greatly appreciated.

    Double click the home button (square)  and all the things you did are there.keep sliding the bar that will come up on the bottom to the left till it cant go anymore there should be a icon looking like this.press that and it should work
    Good luck hope it works.

  • No matter what i try i cant reset or restore my ipod?

    Help anyone. No matter what i have tried i can nor get my ipod to recover or restore?
    I have tried resotring from itunes.
    I get error message 3014?

    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.

  • I downloaded Lion and  have attempted to 'updat' it from apps to my imac... after 3 hours of uploading it show mw an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?

    I downloaded Lion and  have attempted to 'update' it from apps to my imac... after 3 hours of uploading it show me an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?

    What type of Internet connection do you have?  How fast is it?

  • There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator.

    There is something wrong with the volumes buttons in my macbook pro, every time i pressed the one who raises the volume, it leads me to the screen where (i do not no what its called) the background is black with the date and time and a calculator. However, when i lower it, my safari tab goes out of the screen. What do you guys think i should do? I'm getting very nervous.

    hey HAbrakian!
    You may want to try using the information in this article to adjust the behavior of your function keys to see if that resolves the behavior:
    Mac OS X: How to change the behavior of function keys
    http://support.apple.com/kb/ht3399
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    Nah - that's just the normal boot process.
    Clinton

  • ITunes is telling me there is something wrong with my iPhone, what should I do? I have the 16GB iPhone 4 and I bought it 2nd hand with no reciept so I cant send it off. What should I do?

    iTunes is telling me there is something wrong with my iPhone, what should I do? I have the 16GB iPhone 4 and I bought it 2nd hand with no reciept so I cant send it off. What should I do? This happens after i updated it and I click sync.

    Pilko95 wrote:
    iTunes is telling me there is something wrong with my iPhone,
    Can you explain exactly what the message says?
    Do you have its serial number? If you do, type it in the following web page to determine your service and support options:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    If you do cannot find a serial number on the iPhone you can find it stored in your last iTunes backup:
    Open iTunes on the computer you used to sync the iPad and select Preferences…from the iTunes menu. (In Windows, choose Edit > Preferences.)
    Select the Devices pane. Position the cursor over any of its backups. The iPad's serial number will appear in a popup window.
    For a screenshot read: iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
    Scroll down to:
    Additional Information >
    Getting the information from your computer >
    If you have access to your computer, but not your device

  • HT1605 when i'm not using it it turn off and won't turn on so i have to reset my ipod nano 4th gen just to turn it on. what will i do? is there something wrong with my ipod? is it ok to reset the ipod always?

    when i'm not using it it turn off and won't turn on so i have to reset my ipod nano 4th gen just to turn it on. what will i do? is there something wrong with my ipod? is it ok to reset the ipod always?

    when i'm not using it it turn off and won't turn on so i have to reset my ipod nano 4th gen just to turn it on. what will i do? is there something wrong with my ipod? is it ok to reset the ipod always?

  • Cannot fix audio no matter what.

    I have a HP g7 notebook
    Product #: C2M31UA#ABA
    For some odd reason I've been having trouble with my audio, I did searches on how to fix it. I tried doing the following
    Uinstall driver, restart, reinstall driver - still doesn't work
    Clean boot - still not working
    Restarting Windows Audio - still not working
    I also read that clicking playback devices and selecting my default sound devices properties and going to the advanced tab and unclicking Allow applications to take exclusive control over this device which still hasn't worked.
    Now I went into device manager and under sound, video, and game controller there are two devices which are:
    -IDT High Definition Audio Codec-
    -Intel(R) Display Audio-
    I don't know if these two are colliding with one another or not. Now I did run RegInOut System Utilities a day or two ago and I clicked on Service Manager and optomized it, I don't know if this is the cause for my Audio problems. I also tried updating to Windows 8.1 which ran into a problem and did a system restore the other day as well. But my Audio will work like say I'm playing a video right after I restart my laptop and the audio will work but if I pause the video then come back to it there is no audio then the video will crash saying "An error occurred, please try again later" so I have no idea what is wrong with my laptop, I've never experienced this problem before. So if anyone has any helpful insight on what's going on with my laptop that would be great. Thank you.
    *Update* So I went into device manager and I disabled -Intel(R) Display Audio- and I restarted my laptop, surprisingly enough that seems like this was causing the issue, I don't know if this driver is supposed to even be installed on my laptop because I couldn't find it on HPs driver downloads for my laptop. So everything is working now and hopefully that's the end to it.

    Hi dustin93,
    Thank you for your post.
    I am glad that you were able to resolve your issue.  Any recommended drivers will be listed for your notebook on the  HP driver and download page.
     Your display  must also have audio. When Windows installed that driver, you had a conflict with the two cards. By disabling the display driver, you eliminated the conflict and as you stated it is now working. You will need to keep this disabled. 
    One good thing is that you now know that if the audio on the motherboard should every fail, you can use the audio on the display.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • New iPod won't connect to a computer installed w/ old iPod

    I just purchased a new 2nd gen. iPod nano to replace my 2 year old iPod mini. My laptop recognizes my mini fine, but won't even detect my new nano. Why is this? I saw in the other topic that a BIOS update would do the trick, but I updated and the computer still won't recognize. What can I do?
    Thanks for your help
    Dani

    This could be caused by Windows drive letter confusion on your computer. Have you tried assigning your Mini a different drive letter?
    Log off of any other users on your computer (and disconnect any iPods that are currently connected to your computer, as well)
    Then, put your iPod into Disk Mode, and follow these steps:
    1 - Don't plug in your iPod yet.
    2 - Go to "START -> Control Panel -> Admin Tools (if you don't see this, click on "classic view" button on the left panel) -> Computer Management."
    3 - Click on the "Disk Management" button in the left panel area.
    4 - Now, with "Computer Management" and Control Panel windows opened, connect your iPod to the computer.
    5 - Right-click on your iPod's listing there (after a few moments when it gets recognized in this drive window), and click on "Change Drive letter and Paths". Then the "Change..." button.
    Here's what it should look like:
    Assign your iPod the letter "M" "N", "O" or the like (further along in the alphabet).
    For more details, see this article:
    Windows confuses iPod drive letter / Changing drive letter
    If that fails to get your new nano recognized by your computer, try the steps and suggestions in these links below:
    iPod missing in My Computer or in iTunes
    iTunes 7 doesn't recognize iPod
    iPod not recognzied on a laptop through USB connection
    Also, this possibility: Fast user switching on a Windows computer is not supported for iPods
    I hope that helps you.
    -Kylene

  • FCPX 10.1.3 something wrong with audio in .MTS file

    Hi,
    I've just update from FCPX 10.1.1 to 10.1.3.
    I've reported something wrong when i import .MTS files (from my Sony VG30). There are lot of audio paradise. If i listen to the file on another computer there are no problem, but when it was imported in FCPX, it appears. Also with optimised and proxy files.
    If i export a project, the parasite still present.
    If i first rewrap the .MTS files with ClipWrap, then the file imported in FCPX don't have any problem.
    For sure, i don't have that kind of problem in FCPX 10.1.1
    Some other user with that ?

    Yep, i know that method is better, anyway i can't always do that cause i also received directly .MTS file and not the physical SD Card, or should backup the files on a server before import it on my Mac and start the new project.
    I've checkup an imported file i've made with 10.1.1 and played in 10.1.3 and there aren't any bug files, so it's seems to be linked to 10.1.2 or 10.1.3 update : (

  • No matter what, cannot connect to Airport Express

    Hi,
    Okay, I have tried everything in this forum that I could find. But still, I cannot connect to my Airport.
    I have soft reset it, hard reset it; I have unplugged it and moved it to within inches of my iMac. The ethernet cable is connected, everything is on, etc.
    Here's what happens: IF I have just reset the Airport, my imac can locate it. Then, I can edit the name, password, set up using the utility, following instructions found elsewhere in this forum(thanks). BUT when I click update, airport disappears and I'm told "there was an error...please be sure your device is...". And then I have to reset Airport again, and it it begins all over again.
    If I have not just reset the Airport, the utility cannot find it at all.
    Very frustrating. The kicker is, when I first plugged the thing it, I got internet access immediately, no problems....then I switched users to make sure my wife could also get access...and, well, there began my troubles.
    Any thoughts?
    Thanks.

    Update: following the suggestions from the forum, I did a "factory reset" (or double-secret reset) and...nothing, no change. The Utility was able to find the AE after the reset, but when it went to "write" the changes and update, it searched and searched, could not find it, and told "too bad, buddy."
    So, seems likely that there is a hardware problem? It was an Apple-refurbished AE...
    Any ideas would be very welcome - pretty tired of messing around with this, but not looking forward to arguing with customer service over the 10% restocking fee.
    Thanks

  • I just got a Macbook Pro three weeks ago, and it is already freezing up on me. What is wrong with it? Also, the battery life does not extend to 7 hours when connected to the internet. Is there something wrong with my computer, or is this normal?

    It's also really slow. And the mouse key on my screen sometimes doesn't switch back to normal.
    Do I have a virius? How do I know if I do? How do I get rid of it? Are there any free anti virius systems that are available and good?

    I doubt you will have any virus, must never say never
    Free for Home use
    Sophos
    http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition.aspx
    also free  from app store Clam XAV
    http://www.usatoday.com/story/tech/columnist/komando/2013/02/14/tech-myths-mac-s oftware-megapixels-camera/1910521/
    Your Battery will not last long if you keep it on full brightness.
    see this read
    https://discussions.apple.com/thread/964075?start=0&tstart=0
    http://support.apple.com/kb/PH3738
    http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=Battery%2095%25
    Open LaunchPad/Other/Activity Monitor/CPU
    and check if any of your  processes are high% CPU  if so select it and press the Red Quit process Button
    Mac101 may assist you
    http://www.apple.com/support/macbasics/

Maybe you are looking for

  • Error starting java in RedHat Enterprise ES v3

    Hello all. I'm posting hoping someone has run into this before and might be able to help me. We've set up a number of boxes with Redhat Enterprise ES v3, and upgraded the kernel from the stock RedHat 2.4.21 to 2.4.26 because we required reiserfs supp

  • Why does my Macbook Pro go to sleep randomnly?

    My Macbook Pro with a 2.5 GHz intel core i5 and 4GB 1600 MHz DDR3 Memory, just goes to sleep randomnly for no reason at all, i was just doing some work when my macbook just suddenly goes to sleep, there is no magnets around, only the ethernet cable i

  • 'Do Not Disconnect" sign is on but.. its charged up???

    As stated, my ipod is charged (with the plug sign on top right corner) but the 'Do Not Disconnect' sign is on. Here's my problem, I have no itunes on this computer that I was recharging my ipod on, AND I am not allowed to download itunes because I am

  • Purchase details using serial number

    How can I find details about the vendor from which I bought my IMAC 2 years back using serial number?

  • Regarding screen guard issue for xperia z3

    When is the screen guard of xperia z3 coming to india. Iam from visakhapatnam, Andhra Pradesh