No audio, no sounds! for a month! what! plss help!

hi im using a presario v2000 laptop...
before i was using xp... then swtiched to windows 7 and Boom! no sounds..
. looking for multimedia audio controller..,,
ive been looking for its driver for a month now and still cant find the right compatibility... i hope you can help me!...

While I've not handled one of these , I'm going to go ahead and say that HP never bothered to support Windows 7 drivers for this dinosaur . Don't be too offended though , I've seen two year old units that could have been supported and were not . Best I can tell you is to find out what your original audio device was named and find the website of the audio chip manufacturer (i.e. realtek, creative,auzen , you get the idea) and see if they made a 7 compatible driver as hp does not have to support what they consider a third party operating system . Yes , I know its windows , but your laptop wasn't even around before vista I believe and you should feel fortunate that it still runs , the newer models won't be running in the same timeframe .

Similar Messages

My iPhone 4S has had no sound for 2 months.What went wrong?

My phone is not even a year old. One day it worked, and the next day I could not hear the alarm. I updated the night before. It does not ring, Siri does not talk, there is no music, or speaker, alarm, or sound for games. I took it into AT&T and they said it was time for a new phone. I paid a lot of money for this phone a year ago and it should still work. It makes and receives calls, plays the games and Siri seems to still work, but I have no sound!

Hi Paula Rae,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Hope this helps,
Mario

No audio no sound. i dont know what happened????

no audio no sound. i dont know what happened???? may settings changed???
Please help.

Hi @missmayaxo22
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion g6 Notebook and sound issues. Here is a document on troubleshooting sound.
Here is another step to try.
1. Right click speaker icon (right hand corner)
2. Select Playback devices
3. Right click Speakers
4. Enable it and set as Default
5. Click Apply/Ok.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
Hope this helps restore the sound.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I will be traveling to London for 2 months what kind a converter/adapters do I need for my apple products

I will be traveling in London for school for 2 months what kind of converter/adapter do I need for my apple products?

Covers your Mac and your iToys:
http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ

Having problem w 3rd party software ., there tech advsed me to repair permissions before reinstalling software . However , querrie says repairing permissions is not good for system . whats up ,, help !!!

having problem w 3rd party software ., there tech advsed me to repair permissions before reinstalling software . However , querrie says repairing permissions is not good for system . whats up ,, help !!!

I've fixed the problem - I think.
I forgot I had the program "Little Snitch" installed on my computer. So I went into it and saw that it was blocking most of my connections for all the programs I use on a daily basis. Once I lifted the RULE to those certain programs - BAM - everything came back to life in an instant!

My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

Hi there,
Can you please share your Captivate version?(Help>About Adobe Captivate)
Thanks,
Nimmy Sukumaran.

Been out of Java for 3 months, what did I miss?

Hey I stopped doing Java for a couple of months, and I plan to get back in it, im gonna buy a book soon, what do you guys think I should focus on when Im looking? Has anything big come up in Java Game design recently?

Also, I plan to start doing some multiplayer games now
as opposed to my old create an AI and the human goes
against the computer style, what should I know about
doing multiplayer stuff, and where can I find info?I hate to give a flippant answer, but the best things to do are...
a) search/browse these very forums (and read the posts); just because people haven't responded to a topic doesn't mean there's nothing useful in them. In the past two, three weeks, we've discussed topics ranging from synchronizing maps to message passing to security, that is, preventing people from hacking the clients to cheat.
b) don't worry about what you have to know and instead, think of some ideas for games that YOU would enjoy playing. Once you have a rough sketch in place for what you'd like do to, then, and this is crucial, think of ways you might be able to exploit it.
For example, if you create a multiplayer RPG, one of the obvious ways to exploit it is to allow the players to create their own characters, roll their own dice and so on. There are dozens of solutions that may work, but only you can decide which ones best fit your ideas.
When you have a specific question like "I need to do this and that and these create latency. How can I prevent that?" then we are here and happy to help. :)

Playing any movie clip or youtube crashes computer, problem has only been happening for 6 months, what has been changed?

running Windows XP 3 newish computer with lots of memory and hard drive space. Used to be fine, could play any clip or movie then suddenly about 6 months ago it started crashing when any movie clip played. I believe its an update in Firefox that caused the problem as it started happening after an UPDATE automatically loaded. Have been trying to resolve but noone I ask for help from responds including Mozilla.

running Windows XP 3 newish computer with lots of memory and hard drive space. Used to be fine, could play any clip or movie then suddenly about 6 months ago it started crashing when any movie clip played. I believe its an update in Firefox that caused the problem as it started happening after an UPDATE automatically loaded. Have been trying to resolve but noone I ask for help from responds including Mozilla.

Can't install After Effects for 2 months. No help from Adobe.

I am tired of the complete disregard Adobe shows to its customers.
I can't install After Effects. All other apps do install.

Marcos-Brazil what error messages do you receive when you try to install After Effects? What version of After Effects are you attempting to install? What operating system are you using?

I downloaded ios7 and now have no sound when I play music on itunes nor do I have it when I try movies on Netflix. I get sound IF I plug in earbuds, but no sound if unplugged! NO SOUND! I get sounds for texts, calls, etc, but nothing else. HELP!

I do not have SOUND after downloading IOS7. I can use earbuds, but no sound when not plugged in. I cannot play music, hear a movie on iTunes or Netflix. Sound works for incoming calls, msgs, etc, but NO sound for music or movies. HELP!

Format: Windows Media Audio 9 Standard, Stereo, 44.100 kHz
Windows Media Video 8, 320 x 240, Millions
FPS: 29.83
Data Size: 300.88
Data Rate: 2464.78 kbits/s
Duration: 16.59.55
Normal Size 320x240 pixels
Current Size 320x240 pixels (actual size)
I used Mpeg Streamclip last night to take the .mov files to DV, but same thing I put into iDVD and made a disk image. Once all done i opened the image and the videos were there, but no audio.
This first dvd had 2 of the videos in it the totaled about 90mins. I will try using the higher format. Also with having MPEG streamclip now, I guess I should go back to the .WMV files and try to converting form them? instead of the .mov files.

No sound for ipod touch

How do I get sound on my podcasts?.

No sound from peaker?
No sound from headphones?
Do you have sound for music?
What app are you using for podcasts?

How can i create a custom Audio Language name for video?

I have create a dvd with menu and vidoe (Audio 1 is sing a song , and Audio 2 is only music)
but i cant define" a audio name for andio that is mute,
my question is How can i create a custom Audio Language name for video?"
Anyone can help , thank you so much for reading !!

Thanks Stan Jones,
Anyone can tell me a soluation and some better show up method to present that the user is changing a audio track in correct name ...
Or Encore can do a pop-up message to show the user's selection or not ?_? (i don't know)

I'm going to europe for 6 months my question does the voltage change can burn my computer...? what do i need to buy to ensure my macbook is safe and sound?

i'm going to europe for 6 months my question does the voltage change can burn my computer...? what do i need to buy to ensure my macbook is safe and sound?

Read the small print on your power brick. It handles 110 - 240 volts automatically. All you need is a plug adapter to make your current wall plug fit the European wall sockets.

I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a pho

I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a phone. Any suggestions?

Most of the current Apple Intel based computers are comparable in CPU speed. I don't think it is so much the model of laptop as it is the memory, and storage capacity of the machine. If you are going to use FCP on a regular basis, perhaps as a professional or semi-professional, then you should think about the maximum memory and a very large capacity internal disk drive. For instance, one hour of finished compressed video will take up about 1.5 to 2Gbytes of disk space. If you add up the raw footage and still imagery and audio, you'll use up your disk drive capacity real quick. So a hard disk on the order of 750Gbytes @ 7200rpms might be good for video editing. 5400RPMs might be slow to rendering times. Rendering a video might take up a lot of memory so more memory is better e.g. 8Gbytes.
As a rule of thumb, once you get to about 80% of your disk drive or memory you'll see degradation of performance.
You can check out macsales.com. THey have a menu system that will allow you to pick and choose from various alternatives. BTW, it's been said that although Macs are typically spec'd at a certain memory size, macsales.com found that Apple computers will actually support higher memory levels. That is, if 4Gbytes are spec'd, some machines support 6Gbytes. macsales.com will provide the guidance for you.
You might also consider buying an external disk e.g. 500Gbytes to carry around with you for back-up or transport to another machine.

How to set audio hardware input channels for narration & to what?

Searched forum - hope I didn't miss solution for the following:
Using PE3 in Windows XPSP3
Tried for the first time to add narration to a project. Was using a stereo/microphone headset. Got nothing but noise. Could record in Windows recorder and Audacity. However, the microphone as part of the set would not work in Windows Audio Hardware Test Wizard. The set was using a sound chip on the motherboard.
A friend of mine has the same OS, motherboard and is using PE3. He too had never tried adding narration - but tried with a USP connected set, and was successful.
I removed my stereo set, and connected a USB set. To make sure all settings were reset, I did a cold reboot. The USB set worked in Windows Audio Test Wizard. I opened my project again, and in Edit/Preferences/Audio Hardware, clicked AIIO Settings. Unchecked the old set (Realtek) in both the Output and Input Ports area, checked the USB Audio Device, moved to the top of both lists.
Then tried to add narration and got the error message "Your current audio hardware selection does not have any input channels. Please use Preferences>Audio Hardware to correct this problem.
Thinking that maybe this was a preset for the project and couldn't be changed, I started a new project, no video, just tried to add narration, and got the same message.
The entries in the columns in the ASIO Direct Sound for Full Duplex Setup menu for the USB Audio Device in the Input section are: 2048, 0, 1, 16, Yes
The only one of these that seems to be able to be adjusted is the second number - the Offset (Samples). The Audio Channels number is set to 1 and doesn't seem to be changeable. Suggestions?

When working with Audio in most NLE's, i.e. Premiere Elements, or Pro, there are basically three areas that can affect how the Audio is handled on one's system. First, there is the Sound settings in Windows (from Control Panel). Next, the Audio card/chip probably/possibly has a console to make settings at the card/chip level. Last, and these are really two locations, but I'm only counting them as one since they are both in the NLE - Edit>Preferences>Audio & Audio Hardware. This is where Steve is referring to. Check all settings, and I'd suggest doing so in the order that I listed them above: OS, Audio card, then Premiere. A Mute, or by-pass in the first two, can override the settings in Premiere, and you may have its setting correct, but still not be able to effectively use your hardware.
The exact settings chosen will depend on the exact hardware that is properly installed. Without knowing all of your hardware and other settings elsewhere, one cannot give you a definitive answer. Ideally, in the settings drop-downs, you *should* see your hardware listed. Look closely, as these can be a bit cryptic.
If you are still unable to get your hardware working properly, a fourth place to look would be Control Panel>System>Hardware>Device Manager for your Audio hardware. Check that Device Manager sees your hardware, and that it is working properly.
If all is set up properly, but still not working, report back with exact specs on your system, including all of your Audio hardware. There are possibly some more steps that can be taken. I will not mention them now, as they *should not* be needed. If you do need further assistance, please list every option in all of the drop-down lists from Premiere, so we can know what your choices are.
Good luck,
Hunt

No audio, no sounds! for a month! what! plss help!

Similar Messages

Maybe you are looking for