No audio on Adobe Media Encoder CS4

I'm using Adobe Media Encoder CS4 (4.1.0.107) to convert an MPEG2 clip with WAV audio to FLV or to F4V.
The export audio checkbox is checked but the output file I get has no audio.
I'm using Windows Vista SP2.
Please I need your help !!!

I have VBR as an option under FLV/F4V. Multiple passes, too.
Nothing special here. I have used most of these settings to test them out (VBR multipass wasn't available previously in PPro) and compare them to my Sorenson Squeeze results. You'd be better off with Squeeze, but it's not too bad in this version...much better than the previous implementation of the On2 VP6 encoding.
Different vendors with their different applications utilize codecs differently. In other words, just because VBR or multi-pass encoding is part of the available spec on a certain codec (for example, On2 VP6) does not mean that the entire spectrum of options will be fully implemented in your application of choice. Sorenson Squeeze has one of the better utilizations of On2 VP6 available for the price.
EDIT - Make sure you are using Flash 8 and higher, not Flash 7 and higher. Sorenson Spark codec is limited to CBR. It's all available in the video tab under Basic Video Settings and Bitrate Settings.

Similar Messages

Adobe Media Encoder CS4 doesn't encode audio

I'm having trouble getting the Adobe Media Encoder CS4 to
work properly. I have tried multiple files of different lengths but
end up with the same output. Nice video encoding, but the audio
starts and then cuts out after a couple of seconds. The longer the
video, the shorter the audio works. The logs don't report any
issues. Anybody have any ideas?

I have the same problem just trying to crop an FLV. (Encoding from FLV to FLV on Snow Leopard).
The audio just dies about 5 seconds in (the clip is 28 seconds long).
Sucks. I wish I could find the original .mov
I wish I wasn't forced to recompress the audio.
I've tried various settings all night - most settings result in no audio whatsoever.
Also, Media Encoder alters the mod date of my original file. Why?
I'm really frustrated with this software.

F4v encoded with Adobe media encoder CS4 (longer than 71 minutes)

Hi I don't know if this is the correct place for this post. So apologies me if this is the wrong place.
Encoding with Adobe Media Encoder CS4 (4.2.0.006 and 4.0 too)
Source: MOV (DVPAL) longer than 71 minutes
Dest: F4V (H.264)
Result: freezed frames and only plays audio at 01:11. Media Player goes crazy and starts showing some diferent parts freeze frames.
In Quicktime crashes, in VLC the same of MediaPlayer. Sometimes the audio starts to downsampling and sounds like the pitch goes down.
Totally agree with this other post: http://forums.adobe.com/thread/580391
(extract)
I recentlly encoded afew F4V using Adobe Media Encoder Cs4. MOst of them are working properly but I don't know why, all of my video that are longer than 71 minutes seems to have trouble playing back. They all Freeze when they reach 71 minutes or if I navigate pass this point.
thanks and help us please!
Kik

Thanks for the interest.
I'll try to explain all details:
MacPro 1.1 (mid 2006) under Mac OS X 10.4.11 (Darwin 8.11.1 kernel)
System files: journaled HFS+ and a unix based NAS (under samba connection)
I have all material on the NAS and also I make the transcoding over it. Is a simple mov containing DV PAL WIDE interlaced 25fps with stereo audio. typical settings with nothing out of DV PAL standard.
The version of MediaEncoder CS4: 4.2.0.006 (it happens with older versions too)
The settings of MediaEncoder are:
Audio: AAC stereo 44,1 kHz
Video: F4V. MainConcept H.264, fps like source, profile high, level 4,1. CBR compression.
The problem only appears with videos longer than 71 minuts. At 01:11 starts with crazy problems. It seems like the player have some read or problems.
Tell me if you need some other kind of information.
thks

Adobe Media Encoder CS4 Causing Jerky Playback with Speed Changes

Here is an Matrox AVI that was captured in Adobe Premiere Pro CS4. Watching the edited clip with a speed change of 600% looked fine when played in Premiere Pro CS4.
When I export the clip using Adobe Media Encoder CS4 as MPEG2 Blu-ray with a preset of 1440 x 1080i High Quality playback is very jerky. An export of the same clip with normal speed looks great??
Any suggestions would be greatly appreciated
Thanks
Type: Matrox AVI
File Size: 119.9 MB
Image Size: 1440 x 1080
Pixel Depth: 24
Frame Rate: 29.97
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;00;36;27
Average Data Rate: 3.2 MB / second
Pixel Aspect Ratio: 1.3333
Codec Type: MPEG-2 IBP
Bit Depth: 8
Scan Mode: Interlaced - Upper Field First
Actual Image Size: 1440 x 1080
Here are the specs on my workstation
Case: Coolmaster-830
Op System: Vista Ultima 64 Bit
Edit Suite: Adobe Creative Suite 4 Production Premium Line Upgrade
Adobe Premiere Pro CS 4.0.1 update before installing RT.X2 Card and 4.0 tools
Performed updates on all Adobe Production Premium Products as of 03/09/2009
Matrox RTX2 4.0 Tools
Main Display: Dell 3007 30"
DVI Monitor: Dell 2408WFP 24"
MB: ASUS P5E3 Deluxe/WiFi-AP LGA 775 Intel X38
Display Card: SAPPHIRE Radeon HD 4870 512MB GDDR5 Toxic ver.
PS: Corsair|CMPSU-1000HX 1000W
CPU: INTEL Quad Core Q9650 3G
MEM: 2Gx4|Corsair TW3X4G1333C9DHXR DDR3 (8 Gigs Total)
1 Sys Drive: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB
Cache SATA 3.0Gb/s
2 Raid 0: Seagate Barracuda 7200.11 500GB 7200 RPM 32MB Cache SATA 3.0Gb/s Using Intel's integrared Raid Controller on MB

Have you ever upgraded Adobe Premiere Pro in the middle of a project?
By the way I captured the same clip in Adobe software only mode using HDV as a capture settings. The editing mode is Adobe HDV 1080i, 29.97 frames. The results are also jerky. When I render the clip captured it is also very grainy??
Type: MPEG Movie
File Size: 196.4 MB
Image Size: 1440 x 1080
Pixel Depth: 32
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Average Data Rate: 3.2 MB / second
Pixel Aspect Ratio: 1.3333
Thanks for responding so quickly!

Using Adobe Media Encoder CS4 for MTS files

Hey everyone, I did some searching on this topic to no avail so here I am.
Anyway, I recently got an HD camcorder that records in 1080i AVCHD.
I have no problems getting the MTS files off of my camera but as I'm sure you can imagine, working with those files is a whole other issue.
I've found that Adobe Media Encoder CS4 works great in encoding these files to QuickTime format (.mov) but the problem is that the resulting file size is actually bigger than the original MTS file which is unacceptable, especially considering I'm encoding the files from 1920x1080 down to 1280x720.
Does anyone have any experience using AME CS4 to convert MTS files to a more workable 720p format for uploading to YouTube?
I've tried a number of different custom settings to no avail (where you see an "or" is where I've tried different options):
Format: QuickTime
Video Codec: MPEG4-Video or H.264
Quality: 100
Width: 1280
Height: 720
Frame Rate: 29.97 or 23.976
Field Type: Lower First or Upper First or Progressive
Aspect: Square Pixels (1.0)
I won't list the audio options because I don't think that has any bearing on my problem.
Any ideas as to why the encoded file sizes are actually larger than the MTS file sizes? Maybe AME CS4 is not what I should be using for this task?
Thanks for your help,
Tom

I figured it out.
If you select H.264 as the format you can then select YouTube Widescreen HD for the preset.
This will set everything up to convert your MTS file to 720p and reduce the file size by around 30% with little quality degradation in my experience so far.
The only problem I encountered was the video was kind of choppy when the camera panned but that was remedied by upping the frame rate from 24 to 29.97.
Hope this helps someone and if anyone has any suggestions to improve efficiency or reduce file size post it in here.

Adobe Media Encoder CS4 will not convert .mov video

Hello,
I have Adobe Media Encoder CS4 installed on my computer and I'm trying to convert a .mov video into a format that can be edited on windows movie maker and when I convert the video it converts the audio just fine, but there is only a black screen. Any ideas as to why this may be happening?
Thanks in advance.
John Marks

Is this the information you wanted from Media Info? That's the text version of the examined file.Thanks.
General
Complete name                    : C:\Users\jmarks\Desktop\First Contour Airsoft Battle! 6-2011.mov
Format                           : MPEG-4
Format profile                   : QuickTime
Codec ID                         : qt
File size                        : 1.52 GiB
Duration                         : 17mn 43s
Overall bit rate                 : 12.2 Mbps
Encoded date                     : UTC 2011-06-27 20:18:32
Tagged date                      : UTC 2011-06-28 19:41:34
Writing library                  : Apple QuickTime
Video
ID                               : 1
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=1, N=8
Codec ID                         : avc1
Codec ID/Info                    : Advanced Video Coding
Duration                         : 17mn 43s
Bit rate mode                    : Variable
Bit rate                         : 12.1 Mbps
Maximum bit rate                 : 12.1 Mbps
Width                            : 1 280 pixels
Height                           : 960 pixels
Display aspect ratio             : 4:3
Frame rate mode                  : Constant
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.329
Stream size                      : 1.50 GiB (99%)
Language                         : English
Encoded date                     : UTC 2011-06-27 20:18:27
Tagged date                      : UTC 2011-06-27 20:20:17
Material_Duration                : 1063262
Material_StreamSize              : 1609122968
Material_FrameCount              : 31866
Audio
ID                               : 2
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format profile                   : LC
Codec ID                         : 40
Duration                         : 17mn 43s
Bit rate mode                    : Constant
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Compression mode                 : Lossy
Stream size                      : 16.2 MiB (1%)
Language                         : English
Encoded date                     : UTC 2011-06-27 20:18:27
Tagged date                      : UTC 2011-06-27 20:20:17
Material_Duration                : 1063019
Material_StreamSize              : 17008291

No video tab in adobe media encoder cs4

Hi,
I'd like to change the bit-rate when I export, but I have no video tab in adobe media encoder cs4 v4.2
http://adwords.google.com/support/aw/bin/answer.py?hl=en&answer=105647 explains how to change bit-rates but it unfortunately doesn't help me.
Any ideas would be apprciated.
Michael

I found the video and audio tabs etc.
First open in, "device central".
And then if you have "basic settings" displayed you still can't see the "bitrate" and "advanced settings".
You either have to scroll down, or close "basic settings".
And then all is revealed.
Michael

Adobe Media Encoder CS4 runtime error

I am wondering why I am getting a runtime error while
attempting to use Adobe Media Encoder CS4...As soon as I launch
Adobe Media Encoder CS4, it crashes I have installed and
reinstalled Flash a couple time, to see if this corrects the
problem, which it doesn't, and just last week it was working
fine...Does anybody have a ideal what is going on?

Don't know if this helps anyone else, bt the runtime errors i have been getting occur when I try to build and burn a blu-ray file. And they happen intermittently. In fact, on this project, I had burned several test blu-rays without difficulty. When I made one minor change on the penultimate version, and tried to burn again, the system crashed with a run time error. Then it crashed 9 more times over the course of the week.
Finally in frustration, I created an interim ISO file in Encore- ie in the build workstream, i selected burn an image file rather than burning a blu-ray disk. After this intermediate step completed, i then did a separate burn in encore but burned from the image file. No snags.
Not sure why but this program has trouble doing a sequence of activities. As it is, I already render and save the file before burning. Now I have another interim step to create an image file before burning.
In my next hardware change, I am going to switch to make Mac and Apple software. Enough of MS Windows and Adobe, the GM and Chrysler of the software industry. Hopefully what my friends tell me is true; that Apple stuff actually works.

Adobe Media Encoder CS4 Encoding Error

I got an error when Adobe Media Encoder CS4 encoding which is the crash of ImporterProcessServer. It crashes the halfway of the encoding process. I restarted my comp and tried several times before but the results still the same. Sometimes ImporterProcessServer did not crash but the encoder failed compiling without any error.
Processor : Intel Core 2 Duo E4600 2.4GHZ
RAM: 2GB
OS: Win7 32bit
Graphic: Nvidia 8600 GeForce 512 mb

First thing to check is what is on the Timeline at about the 50% point. Do you have an odd Asset there?
Do you have a gap in the Video at about that point?
Then, do you have adequate defragmented free space on the destination HDD?
Good luck,
Hunt

Adobe Media Encoder CS4 error

Hi,
I've just purchased Flash CS4 and tried the "Adobe Media Encoder CS4" that comes with it.
When attempting to launch it, I get this (see attachement) error and the program doesn't launch.
Anyone aware of the cause of this error ? How I could get it resolved etc..
Thanks in advance.

Any update on this?
I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

Adobe Media Encoder CS4 error in elearning suite trial version

Hi there, I have a trial version of elearning suite 2.5 and I have the error "Thank you for using Adobe Media Encoder CS4. The Adobe product that installed Media Encoder has not activated. Please launch and activate that Adobe product before continuing to use Media Encoder". My searching points me to a full reinstall, but is there an easier fix? Currently running Mac OS 10.5.8. Thanks.

Any update on this?
I get WinFile.cpp-754 on CS4 and WinFile.cpp-785 on CS5 trying to encode the same AVI file.
I'm trying to load a 59.94 fps AVI file into PremierPro CS4 and need to convert it to something else (correct?)

Adobe Media Encoder CS4 Crashing Immediately

Hello,
I am running the CS4 Production Premium suite on a Windows 7 64-bit computer with 12GB RAM. Up til last week, the whole Adobe suite had been running smoothly. (I primarily use Premiere, Media Encoder, Photoshop, and Encore). However, Encore started locking up the computer any time I tried to work on authoring a Blu-ray (it locked up immediately upon opening a Blu-ray project, and only locked up on a new project when I switched from DVD to Blu-ray mode).
I assumed that some of Encore's source code had either been moved, overwritten by something else, or that there was possibly a program incompatibility with something else on my computer. So I took the step to uninstall and reinstall Encore from the install DVDs.
Upon a "successful" reinstallation, I then went into Premiere CS4 to encode a timeline to a P2 file. Premiere seemed to be doing its normal exporting process fine, but Media Encoder would crash after the red splash screen disappeared. To be more explicit, the red splash screen would disappear and be replaced by a window the normal size of the Encoder program, but nothing appeared on screen in the window other than a small white box in the upper left with the rest just being plain gray (see attached photo). At the same time this white window appeared, Win 7 popped up a box saying that Adobe Media Encoder has stopped working and that it would search for a solution to the problem, which it never could do.
I then tried deactivating the suite, uninstalling the full suite and reinstalling, updating so the patches would bring it up to date, and then tried running Adobe Media Encoder again, this time running from the Start menu rather than from Premiere. Yet, it was still the same response: the program crashes immediately.
I would appreciate any suggestions and help that people can provide.
Sincerely,
Kevin T
San Diego, CA

Here is the only relevant info I could find in the Event Viewer:
Faulting application name: Adobe Media Encoder.exe, version: 4.2.0.0, time stamp: 0x4af13937
Faulting module name: WatchFolder.dll, version: 0.0.0.0, time stamp: 0x4af1344e
Exception code: 0xc0000005
Fault offset: 0x00011f03
Faulting process id: 0x834
Faulting application start time: 0x01ca9d3e4234c82b
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Media Encoder CS4\Adobe Media Encoder.exe
Faulting module path: C:\Program Files (x86)\Adobe\Adobe Media Encoder CS4\WatchFolder.dll
Report Id: 89095e2b-0931-11df-a5f1-00248c778de6
Does this seem fixable to anyone?

Adobe Media Encoder CS4 doesnt allow me to set the bitrate?

I have a Video file that I need to encode to several f4v
files at different bit-rates, but it seems I cannot change the
bit-rate in Adobe Media Encoder CS4?
I used the previous version to encode, but I cannot encode to
f4v, only flv.
Is there something I am missing here?

Sorry, found it,
Didn't realise I could scroll down to find more options in
the Encoder Window

Adobe Media Encoder CS4 Issue

I am currently using Adobe Premiere Pro CS4 and when I go to File → Export → Media and put in my settings Adobe Media Encoder CS4 sends a Error Message...
The procedure entry point
??0NewHandlerInitializer@ErrorManager@config@dvacore@@QAE@X
Z could not be located in the dynamic link library dvacore.dll.
Thats the Error Message and I tried MP4, Quicktime, H.264, and FLV / FL4 and NONE of them work!
So I got the updates and reinstalled it and tried it again but it still broke!
I NEED A SOLUTION!

Hi,
Did the update through the Adobe Media Encoder menu item succeed? If not, could you run the "Adobe Updater" program explicitly. The path is "C:\Program Files\Common Files\Adobe\Updater6\Adobe_Updater.exe". This should search for all available updates and show a dialog box in the end. Click on 'Show Details' in the left bottom of the dialog to bring up another dialog with the list of available updates. Do you see any "Adobe Media Encoder" updates in the list? If yes, could you select those checkboxes and install updates for Adobe Media Encoder? Let me know if you see different behavior on your system.

Adobe Media Encoder CS4 problem with watchfolder.dll

When i loading Adobe Media Encoder CS4, i have this error and application crash:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Media Encoder.exe
Application Version: 4.0.0.0
Application Timestamp: 48b3250d
Fault Module Name: WatchFolder.dll
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 48b32139
Exception Code: c0000005
Exception Offset: 00008a83
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1049
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
OS Version: Windows Vista Ultimate SP1
Processor: Core 2 Quadro 2,66 Ghz
Memory: 4GB

These directions are specifically for windows 7 x64
It may be hidden since it's a system folder. You can get to it one of two ways.
Either: Hit start button + r to get run, then insert (C:\Users\Administrator\AppData\Roaming\Adobe\Adobe Media Encoder\4.0\) without the () and press enter. *This is assuming that your username is Administrator. If the folder exists it will take you there, even if it is hidden.
Other way: hit start button on keyboard and type in "folder options". Press enter when it shows up in the start menu search. Click on the View tab then select "Show hidden files, folders, or drives" and uncheck "Hide protected operating system files". This should enable you to see both the AppData and Roaming folder. You may want to undo these selections otherwise you'll see files you usually don't want to see. (thumbnail caches...)
If neither of these methods work, let me know which folders you see in this directory "C:\Users", Administrator may not the account you're currently running on.

No audio on Adobe Media Encoder CS4

Similar Messages

Maybe you are looking for