No audio on frontal speaker

I can't hear anything on the frontal speaker, I can use the handsfree and a bluetooth handsfree with no problems, even the lower speaker but the one next to the frontal camera doesn't work. I've cleaned the jack connector because it had lint but still it doesn't work, any ideas?

It worked, I had not done that cuz it wasn't available on México but I did that yersterday and it works again. It was kind of weird though, it happened 3 days after my warranty expired, some timing. Thanks

Similar Messages

  • My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

    My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

    There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
    This has been a fairly common problem, but in most cases it is easily cured as described above.

  • HT1222 my iphone 4S no longer plays music output to speaker after updating to version 6.1.3.  I am unable to reset the phone to an earlier version!  How do I get my audio output to speaker back? (music, audible, youtube, netflix))

    my iphone 4S no longer plays music output to speaker after updating to version 6.1.3.  I am unable to reset the phone to an earlier version!  How do I get my audio output to speaker back? (music, audible, youtube, netflix)

    So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
    As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

  • How to get audio out of speaker with angry birds app?

    How do I get audio from the internal speaker for my angry birds app.? Only audio is through the head phone jack......

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • How do i get music on my iphone to go through the audio earbuds, not speaker?

    I'm trying to use my earbuds to listen to my songs on my iPhone.  When i put the jack into the audio jack hole I assumed it would stop playing music via the speaker and go through the earbuds....but, it doesn't.  What am I doing wrong?  Thanks.

    Also try putting the earphone halfway in and the when you can hear it from the earphones put the whole thing in

  • X-Fi XTreme Audio NO surround speaker volume contr

    As stated in the topic's title, I have NO rear speaker volume control. This will be the first time I have EVER had to deal with this. I just got a new install done on my computer and I got the drivers and installed them. After that I tested my drivers out, of course, with some music. Then I realized I could turn down the volume all the way and I was only controlling the front-two side speakers. The front center speaker, be it part of the surround, would not respond to volume changes either.
    In short, when I turn down the volume like I ALWAYS have in the past it refuses to turn down the surround speakers as well. It only turns down the 2. speakers.
    I have seen many of these appearing on this site due to my search and I have noticed Creative is not responding. Due to my faith in Creative fading upon seeing poor support, I surely hope I get a snappy response, even during the holiday seasons.
    As a side note: Mute works for ALL speakers.
    ===================
    Microsoft Windows XP Media Center Edition 2005
    Creative Soundblaster X-Fi XTreme Audio
    ASUS P5N32-SLi Deluxe
    Driver version: 5.2.8.20
    Driver Date: 6/8/2007
    IRQ: 8
    I/O Range: EC00 - ECFMessage Edited by AKW on 2-8-200709:53 PM

    I fixed it:
    . I uninstalled all related Creative software.
    2. I uninstalled sndvol32.exe from my System32.
    3. I uninstalled and removed all X-Fi drivers.
    4. Rebooted.
    5. Reinstalled sndvol32.exe using: http://support.microsoft.com/kb/39095
    6. Reinstalled the latest driver and console from Creative.

  • Audio in left speaker not working properly

    Hi I recently have bought the HP ENVY 27 and I'm having trouble with the audio. Whether I pay music through the built in speakers or through the headphone jack in the monitor the left speaker seems to be a LOT (at least 50%) quieter than the right speaker. At first I thought the speakers weren't leveled/balanced out but I checked and they are 50/50. Any ideas on how to fix this?

    Ok so I just plugged the monitor into my PC through the front headphone jack and it's working fine, it must be the jack at the back of my PC that is messed up! 

  • Captured video only plays audio through one speaker

    I captured video from a mini dv and when I play the clip in FCP the audio only plays out of one speaker and it only shows on one audio meter in FCP. I captured this video with a DSR-20 and it displayed NS Audio on the screen. Both meters were playing on the deck and in FCP while previewing and also through my headphones. Does anyone know what I need to do this to correct this?

    First I'd verify how the audio was captured. Did you have it set for Ch 1 + Ch 2, or Stereo, or Ch 1 [only], or Ch 2 [only] or as a mono mix?
    Next, verify that you actually had two channels of audio on the tape, not just one channel.
    Assuming that there are two channels on the tape, load the captured clip into the Viewer and see if there is an audio waveform on both channels. If there is, check to see if both channels are panned the same - if they are, pan one left and one right or both to center.
    If there were no waveforms on one of the channels, try capturing a short segment of the same tape using another Firewire cable.
    -DH

  • NO audio from laptop speaker when phone connected to Bluetooth with media audio checked

    Hey guys, when I connect my Verizon Samsung Galaxy SIII (SGS3) phone through my Toshiba Qosmio x875-Q7280 Windows 7 X64 Bluetooth with media audio checked on my SGS3; for what ever reason there is no audio playing through the speaker when I try to listen to my music and for what ever reason I notice in the recoding tab under Sound my SGS3 profile mic audio bar was moving up and down. When I went in to configure it, I click a check box which played the music that I was playing through the laptop speaker but it sounded all muffled. If anyone can help would very much appreciate it.
    Solved!
    Go to Solution.

    Just wanted to update just incase someone else is have this same problem also, so I manage to solve this on my own my installing a bluetooth driver from Intel. I'm not sure if link posting is allow, so I'll just direct you there. If you google Intel and navigate to their download center, search for Intel® PROSet/Wireless Bluetooth Software for Windows 7* it should have two choice 32 bit and 64 bit. After it finish installing there should be another bluetooth icon in your bottom right tray. Next right click the bluetooth icon and add a new device as you would any other and enable media audio from your connected device (in this case it would be my Samsung Galaxy S 3) and you should be good to go with music or what ever sound coming out through the laptop speaker.

  • Multi-Camera Source Sequence Audio from 1 Speaker instead of both??? HELP PLEASE!!!

    So I have been at this for awhile now. Am I missing something?
    I simply take my 2 .MOV's and 1 .WAV and I create a mulit-camera source sequence. Except when I play it from my time line and it appears in my program pane it only plays the .WAV from one speaker...
    If I break it apart and load the .wav from the timeline into the source pane using keyboard shortcut "F" then it plays through both speakers..?
    Attached is a screen shot of the broken down Mulit-Camera Source Sequence by clip.
    Please help me, thank you!
    Multi-Cam sequence ONLY PLAYS AUDIO FROM LEFT CHANNEL, Adobe Premiere Pro CC.Multicam Editing in Premiere CC IssuePremier Pro Multicam Not Working.creating multi-camera source sequence w/ externally recorded audio

    I just tried that, although it still plays out one speaker when I play it in the timeline, either out or in the nest.  It appears that the timeline has an audio setting that is off perhaps? Or a bug? I have attached many images to check out... Thank you advance!

  • Airtunes Audio from One Speaker Only

    I've been running my Airtunes device for about a month now. However, I've just noticed that the sound is only coming from one speaker. I have done all the normal things such as changed the speakers, and changed the audio cable, but the problem persists. Apart from that, the devices exhibits no other problems.
    Before I send it back on warranty, anyone have any ideas on what I might be able to check. TIA.

    Have the same problem mate...really annoying.... i went and bought a better quality cable but to no avail!! Bringing it to local mac service place tomorrow to get it checked out. Looks like the stereo input port is wrecked!!

  • IChat leopard with low audio, only one speaker playing

    Anyone else have low sounding audio in ichat during video chats? The incoming audio only plays through one speaker and its very low in volume, ive checked all my sound settings and they are correct. I also tried with speakers plugged in and the sound still only plays from the laptop speakers

    Ask your Buddy to go to System Preferences > Sound > Input and to turn themselves up.
    9:01 PM Thursday; November 1, 2007

  • No audio from Right Speaker.

    Hi,
    There is no audio output from Right Laptop Speaker.But there is audio from Left audio speaker.If i connect external speakers ,there is audio from both speakers,same is the case with headphones.
    Please help me to resolve this issue?.My laptop is under 1 year on-site warranty.

    So funny! Last year I got the new Iphone 4S upgraded from a 3S. I also thought the speaker was broke on the left hand side. I put it down to old age, but when it happened again on the brand new 4S I went back to the Phone Shop running my mouth how I wanted it changed Right Now!! I was like its happening again and this time the phone is brand new bla bla bla. The guy just laughed and said mate that is a Mic not a Speaker! I just wanted to die hahaha. Walk of shame!!!!

  • No audio with internal speaker.  Help!

    Serious problem here! Audio just stopped working using internal speaker. Went to YouTube to show a friend how it works, and video was fine, but no audio. So I switched to iPod mode, NO AUDIO!!! Output is fine via dock connector or headphones, and the internal speaker works fine when playing ringtones, etc. What happened, and how can I fix it? Tried cycling power, hard reset, and restore software via iTunes. Any suggestions? Help!

    Apple suggests plugging and unpluging the headphones, sometimes the headphone sensor gets stuck.
    Take a look at THIS thread

  • No audio from internal speaker

    My Macbook suddenly stopped recognizing its speakers. When I go to system preferences, the only listing under "output" is "digital output". I can use headphones, but when I unplug them, the red light remains on in the headphone jack and the speakers won't work. The speaker icon is grayed out.
    I have tried removing the battery and zapping the PRAM. I have also tried going into the library and trashing all the audio settings. I originally thought this was a problem associated with 10.6.3 update, but apparently, that is not the case. I even took my computer in to the Apple Store. They ended up replacing my hard drive, which did nothing to solve my problem (but gave me days of reinstalling applications ahead of me).
    Apple tech support via phone have not come up with any solution.

    Same thing just happened to my 3 year old MacBook... I fixed it after referencing the URL below and realizing one of the "tabs" in the audio port was causing the problem. After about 8 tries of working the ear pod jack in/out of the port (with red light glowing), the light finally went away and my internal speakers now work. I've seen some people recommend taking a toothpick and gently pressing down the tabs in the audio port, but that didn't work for me. Good luck!
    http://iboughtamac.com/2007/02/09/my-macbook-speakers-stopped-working/

Maybe you are looking for