No audio on homepage video and its original iMovie clip

Can't find answer in discussions. Can anyone help?
Checked my homeage on .Mac, found one video clip has no audio suddenly.
All audio hardware is OK, volumes are OK, everything else is audible.
Checked iSync file for the video. Same, no audio.
Checked back to original iMovie clip and the audio clip shows on timeline but audio for this clip (and one other one) won't play. Rest of audio for the iMovie project it's from plays OK.
Tried discussion suggestion of playing a few notes in GarageBand (to clear an audio conflict?)-- didn't work. Audio on original iMovie clip won't play.
Any idea what can be causing this one clip to have audio failure? And how to get the clips' audio playing again so the iSync .Mac hompage clip can be replaced?
Related to this problem (?): Several months ago upgraded to QT 7 and previous QT 6.5.2 iMovie wouldn't load, found here in discussions to uninstall 7 and redownload 6.5.2, which I did and iMovie loaded/played OK.
Recently updated iTunes. Wondering if that caused this problem and how to uninstall that update if it is the cause.

A bizarre false alarm. After spending 3 hours running utilities, checking download reinstallers info. etc., turned out to be hardware connection. Had fitted a mono plug to a stereo plug for mono recorder monitoring for both ears. Original track on video was in mono feeding out on one channel. That channel wasn't the one the mono plug was feeding through, hence no audio on the mono clips. Yes, should have set the audio to mono on the original mono iMovie clips.
A reminder to check every little hardware issue first.
E Mac Mac OS X (10.3.9)

Similar Messages

I have 30 gb of audio 14 gb video and 33gb of other what is other and how do i get rid if it.

i have 30GB of audio 14GB video and 33GB of other.... how do i get rid of the other?

The Other category of your iPod consists of such things as album artwork, the iPod's software, games, files you are storing external on the device, etc. However, it's size you usually only a small fraction compared to the rest of your iPod's storage allocation (unless you are storing up large chunks of data on the iPod externally).
A large amount of other is usually a good indication of corrupt files on your iPod leftover from sailed sync operations with iTunes. The only way to reduce it to a smaller number and address this issue, is to restore the iPod to factory settings in iTunes.
B-rock

How do I take the audio from a video and divide it into separate songs

How do I take the audio from a video file and divide it into separate audio songs? I then want to export those songs into itunes.

http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)

After I detach audio from the video, and I go to delete the video portion but keep the audio, it deletes both. Am I doing something wrong?

Hello Everyone!
I would appreciate your support if you can. I know how to detach the audio from a video clip. Once this is done I wanted to add another video shot (B-roll) over the audio I detached. When I go to delete the video (which is detached form the audio) It deletes both of them automatically.
Is there something I am doing wrong? Do I need to unpin the audio somehow?
Thanks again.
RJ

Hey I found the info I needed. I decided to show it to anyone else who may be looking for this same answer.
http://www.youtube.com/watch?v=xmP0mUKsJwU

Prior to installing iOS 6 on my iPhone 4, I could stream video and audio via "Air Video" and "Stream to Me" from my PC, to my TV via a HDMI adapter. Now I can only get video and no audio.

I have been able to stream,via wi-fi, TV shows, movies and music from my laptop through a HDMI adapter via my iPhone 4, to my television. I use mainly "Air Video" but also use "Stream to Me", both with the same results. Since the update to iOS6 this is not possible. I can still get video but now no audio. Help me!

I too am having this very problem. I have an iPhone 4S that is less than one year old. Prior to updating my iOS firmware, I was able to record and transfer video to my PC and view it with a variety of programs without any modifications. Since updating the firmware, all videos that have been taken are not viewable on my PC. I can hear the audio associated with the video, but the video is blank. I can transfer the file off my phone using the Windows transfer tool. Then sync the video back to my phone and it works just fine. I tried emailing the video to myself, that did not work. I rebooted my computer, no luck. I reinstalled QuickTime, still isn't working. I can still watch the videos that were made with iOS 5.1.1 but nothing made with iOS 6.
I have been successful with the following procedure: Once the video is transfered from the phone to my PC, I change the extension from .MOV to .MPG and this makes the video viewable with Windows Media Player; however, if the video is shot in a portrait orientation, it displays sideways in WMP as a landscape orientation. I have been able to then run the video through Microsofts MovieMaker program to right the video 90 degrees but the image comes out a little squatty like it's out of scale. In either case, it serves the purpose and I can export it to another .MPG format that I can then run through Sony Vegas and edit as I see fit. While it works, this is a huge hassle and I shouldn't have to do it.
Does anyone know of anything that is working? Are there new codecs somewhere that windows users need to get a hold of?

Need help adjusting audio on imported video and/or cpvc to cptx presentation

I inserted a video into my cptx presentation that I created using captivate but the audio was too low. I went back into the cpvc (captivate video demo recording) and increased the volume and republished it and imported it again. However the sound will not increase and is still low. Can someone help me figure out how to increase the volume within the cptx or how to make the cptx recognize the updated volume that was increased? Really running into brick walls on this one...
Appreciate any help that someone can provide.

Is it AVCHD, Mini-DV, or DVD? What format does the camera record to?

I purchase a audio books Joel Osteen and its not working

I purchase a audiobook, Joel Osteen and it's on my iphone but it does play, no sound. the name on the audiobook is Your best life now. Why can't I hear the audio. please let me kown.
Thanks
Grace
< Edited By Host >

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Getting Refunds for your iTunes Store Purchases
http://www.labnol.org/software/itunes-app-store-refunds/13838/
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Cut video and then export seperate clips

Hello,
I was wondering if anyone can help me with the following:
I am trying to cut a long video (about 40 minutes) into several short clips (about 15 seconds each) and export these as seperate clips.
I have been able to cut the long video into all the seperate short clips with Premiere Pro CS 5.5, but I cannot find an efficient way to export them all at once. I have considered using Adobe Media Encoder to export all the short clips, but I cannot use the usual "drag and drop" option for all the short clips. I have to export every single short clip, which takes quite a while, so I hope someone can tell me, why I cannot drag all the clips into AME at once. Or maybe someone knows a better way to export all these short clips...
I'm using a Mac, the short clips should be in f4v-format when exported. The original long video is in dv. If you need any other information, please let me know.
I have not used the programme that often, so thanks a lot in advance for any help!

You'll have to add the sequences to AME one at a time, then you can export them as a batch.

I pause my video and the audio continues...if I play again it causes a major headache. Help?

This might be an easy to answer question, but I am making my second video, so I'm not too knowledgeable. Anyway, I imported audio into my video and it plays back fine. So I play the video, and pause it to try and synchronize the audio. The video stops, but the audio keeps playing, and it will not stop until the whole thing has played. If I try to start from the beginning again and play the audio to sort of override it, it just overlaps with the original audio, and the resulting noise gives me a headache. I don't know if somehow I can stop the audio a portion of the way through, but if I can, that would be great. It would make syncing a whole lot easier. Thanks!

Ok, so I had a .m4a file on my computer, which I then turned into an mp3 using the adobe media encoder. I imported the mp3 using File-Import-Import to Library, and then I created a separate layer for the file and dragged the audio from the library onto the stage while I was on that layer. The layer now had a sound file on it, and I put a keyframe a ways ahead on the timeline so I could see the audio layer. I then played it back using the play button underneath the timeline to begin syncing my animation with the audio that I had imported. I stopped it, a little late as it turned out, but the music continued to play. It would not stop until it had gone through the whole song. While the song was playing I tried starting it from the beginning again, but the new sequence overlapped with the old one so they played together out of time, creating a very unpleasant noise. They both had to finish before I could play it back again to try and sync my animations more precisely. If I could pause the video (again, I'm using that little button at the bottom left of the timeline) and stop the audio, syncing would be so much easier, and I assumed there was a way to fix this. I am working with Flash Professional CS5.5. Thanks for your consideration!

How can I delete the video and keep the Audio in a few frames using Imovie 11

How can I delete the video and keep the Audio in a few frames using Imovie 11?

I've met the problem too before. but i solved it with Audio Converter Mac instead of iMovie. If you have similar situation that just want to keep audio but not video, and if your file format is not workable in iMovie, you can use the Audio Converter for help too. it can easily help to extract audio soundtrack from any video format. Or if you need to convert one audio format to another, it is a good choice too, because it supports many common audio output formats.
<Link Edited By Host>

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

Binbashi
You can separate the audio track from video and save it to a DVD disc within Premiere Elements but not a CD disc.
To do save to the audio to DVD disc, you do not have to separate linked audio video, just use the export Publish+Share/Computer/Audio and set Presets to the wanted format (AAC, AIFF, MP3, or Windows Waveform (WAV).
You will not see Audio in the choices since it is at the bottom of the list of choices under Publish+Share/Computer/. You will need to use the thin scroll bar to the right of the choices to scroll to it.
If you need information on selective export of Timeline content when dealing with more than just this one file on the Timeline, please let us know. If you are trying to produce a CD for listening in car or CD player elsewhere, please let us know.
Looking forward to learning of your results.
Thank you.
ATR

How do I re-synchronize video with its audio in PPCS5?

I've captured video recorded at 24/fs. PPCS5 captured the video and audio. The video and audio play at dis-similar rates in PPCS5. The video and audio are synchronized when played in Windows Media Player, Real Player, and Corel. Appreciate a fix. Although, a work-around would be helpful in the interim. Thanks.

Strange. I can't see any obvious reason for the loss of sync there. With the data supplied so far, I'd expect everything to work just fine. So...maybe there's some missing data.
FAQ: What information should I provide when asking a question on this forum?

How do I remove the video and keep the audio in iMovie?

How do I keep the audio and delete the video? I've seen several answers saying to go to "advanced" but I don't see where that is. I went to preferences and checked show advanced setings but I still can't figure it out. Please help! (: By the way I'm on a MAc computer.

I've met the problem too before. but i solved it with Audio Converter Mac instead of iMovie. If you have similar situation that just want to keep audio but not video, and if your file format is not workable in iMovie, you can use the Audio Converter for help too. it can easily help to extract audio soundtrack from any video format. Or if you need to convert one audio format to another, it is a good choice too, because it supports many common audio output formats.
<Link Edited By Host>

Independant video and audio tracks separate

I am using Premiere Elements 12 on a PC. I am working on a multimedia project combining video, stills and audio. Independant video and audio tracks separate when I insert a still image on another track. The tracks are not grouped or linked together. I do not know how to prevent this happening. The manual suggests pressing the Alt button when inserting but this does not work.

skinnymurray
Holding down the Alt key of the computer main keyboard does work and works well under most ordinary conditions. Please practice and refine your Alt technique with care patience. But....
Have you tried keeping certain parts of your established track content together by using the Group command after selecting a
bunch of clips all at one time?
Please review the following free online video tutorial which I post for informational and non promotional purposes
https://www.youtube.com/watch?v=IqRT8OzdxVc
I am having a lot of trouble with Internet connection today due to local storms. The above link was snowy when I viewed
it but it should be OK if your Internet connection is OK. I will monitor this situation. The information given in that video tutorial relates to your question.
We will be watching for your results.
Thank you.
ATR

Video and audio sync when viewing clips online

When viewing clips, like on youtube, the graphics start playing, however there is no sound, only after a few seconds the graphics freeze and the sound that was missing starts playing and the graphics resume when they're in sync again.
Also when I pause a video and click play the clip will not resume and I have to click the "time bar" and then it will play.
My 13 MB Pro starts furiously blowing the cooling fan and consuming battery life when viewing clips on most video sites.
How can I fix these things?
This already happened before upgrading to Lion, btw.

Are you capturing this thru the LS? and what is the format you are digitizing? DV? or uncompressed? Would be best I'd think if you don't capture audio and video as separate files too. That leads to problems especially with DV captures.
How are you monitoring the audio and video? all from computer or? You could be in sync and not know it if you are using computer speakers for monitoring audio when watching video externally for example.
If you monitor both from the computer and it is in sync, but not when you record to video, I'd suggest that you export a self contained movie of this material and import that for the print to the beta... I'll wager that will keep your sync. If this doesn't help, might want to post this in the AJA KONA forum at http://www.creativecow.net Might be something to do with your LS, not sure but do have the latest drivers installed on it...
Jerry

No audio on homepage video and its original iMovie clip

Similar Messages

Maybe you are looking for