No audio on HP Pavilion 771n after upgrading to Vista

I upgraded my desktop pc HP 771n from the XP Operating System to the Vista. Now I have no audio. After searching for a few days, I finally located an audio driver compatible with Vista AC 97 Down compatible with Vista. Now I have a Code1 error - I need to get the proper configuration for the driver. I have already tried deleting the driver, then clicking on the button for making changes. Can the driver be configured manually? How do I configure the driver for audio?

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how you are not able to get audio on your desktop computer after upgrading to Windows Vista, and I would be happy to assist you in this matter! According to the available supported drivers for your computer, there is no Windows Vista audio software available. If you wish to use your onboard audio hardware, I recommend re-installing Windows XP or installing a compatible 3rd party sound card. I hope this helps! Best Regards

Similar Messages

Monitor HP w2338h area shrank after upgrade from vista 64 to 7

Monitor HP w2338h area shrank By 3/4in both sides &1/2in top & Bottom after upgrade from vista to 7 Tried settings to max resolution On HP Pavilion a6857c Please Advise, I also reloaded the drivers for my Video card a ATI Radoen 5450 HD and all updates for windows 7 home Premeium 64bit & HP updates
This question was solved.
View Solution.

Glad to help!
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

After upgrading from Vista 64 64 bit to Window7 64bit the DVD stopped working

After upgrading from Vista 64 64 bit to Window7 64bit the DVD at first worked just fine but after about 7 months it just stopped responding as if the hardware as in the DVD Dive it compatible with Windows 7. I have reinstalled the full Windows 7 that I got from HP but it still has the same problem and when I try a full recovery it will start to read the recovery DVD but it take way to long like 15 mins just to start reading and it stops reading with error's after about 2 min's into it.
Were is the errors that I get
This PC in not supported by the system recovery disc. you will not be able to continue to recover this system with these disks.
keep in mind that the problem lies with the DVD drive not working and like stated above it will work if Windows Vista 64 is installed so this error message is not the key to the problem just part of it.

Fixed the mic issue by running Windows Update and installing the latest audio drivers.
AnalogDevices - Audio - SoundMAX Integrated Digital HD Audio
Installation date: ‎11/‎1/‎2009 8:35 AM
Installation status: Successful
Update type: Optional
AnalogDevices Audio software update released in June, 2009

No sound after upgrading to Vista on Satellite U-series - solution

Hi I had the problem that I didnt have any sound after upgrading to Vista Business.
After several attemps to get a solution from Toshiba I found it out myself.
Here are the steps to solve this problem:
1. update Bios to 3.5 version
2. Do a clean Vista installation
3. Install the Value added Package
4. Install the audio driver
5. Install the fix "mute off"
Should work now.

Hey wow, thats really nice. Already bookmarked it. :)
We users and me (freak ;) ) appreciate some good solutions.
Thx dude

Satellite Pro A200-16N: Can I use Recovery CD after upgrade to Vista

Hii!
Im thinking of upgrading to windows vista on my Satellite Pro A200-16N, and i've ran the windows vista upgrade checker from the microsoft website and it says my system will support windows vista so im ok on that.
The problem is, if my laptop were to break or something like that at some point, will my recovery CD's that was supplied from toshiba still work on the laptop with windows vista?
Will they return the laptop to windows xp or since my laptop has a different operating system will they not work?
Also...
Whats the deal with BIOS?:S
I dont understand!
If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
As i have to download the new drivers before upgrading yes?
Thanks!

Of course the Recovery CD will work.
The Recovery CD will set always the notebook back to the factory settings. This means that the whole HDD will be formatted and the Toshiba image will be installed.
> Whats the deal with BIOS? I dont understand!
> If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
In my knowledge this notebook was already delivered with Vista therefore you dont need to update the BIOS if you want to install Vista again.
Some A200 Satellite series needs a BIOS update if you want to use the XP.
In such case its advisable to update the BIOS to XP version firstly and then to install X OS.
Best regards

C6150 won't print after upgrade from Vista to Win 7

Hello.
I have a C6150 AIO that worked fine under Vista. Since I've upgraded to Win 7, I cannot get a printout from any application or the Windows test print. The HP Solution Center test print works fine.
- Printer is hooked up wirelessly
- I've installed the latest driver from HP that is supposed to be Win 7 ready
- I've also installed the patch they recommend after upgrading from Vista
There is no error. Print job shows up briefly in the print manager window, then disappears as though it printed. I'm at a loss, any help would be appreciated.
Paul
This question was solved.
View Solution.

I hope I have now sorted this problem.....
After numerous atems to install HP Windows 7 drivers & apps and failing I decided to restore the PCs to the day before I first installed the Drivers etc.
Then I unistall HP software and reinstalled the new drivers etc. This I had to do a couple of times on the Laptop (restore 3 days back).
After installing the HP software you can print a test page, print OK. Then goto printer properties and ty to print a test page from there, if this is unsuccessful restore system and start again. Most it took me was three attemps.
Now allI have to do is hope that the windows updates dont mess it all up again!
Hope this helps you......... Good luck

Elements 5 will not start from the windows old file after upgrading from vista to win 7

Elements 5 will not start from windows.old after upgrading from vista to win 7

Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
What exactly happens ? Can you see the processes running in Task-manager?

Audio Inputs no longer work after upgrade to 10.4.10

Anyone else having trouble with audio inputs after upgrading to 10.4.10? Here's my deal:
MacPro dual 2.66, 4GB RAM, running 10.4.10 as of this morning.
Upgraded to 10.4.10 today and the mic on my Plantronics USB headset quit working. 'Phones still work. Here's what I did:
1. Tried multiple audio input devices. None work.
2. Tried all USB ports, problem persists.
3. Tried the 1/8" audio input, problem persists.
4. Zapped PRAM, problem persists.
5. Called AppleCare and they had me do an Archive and Install on the system software, which installed 10.4.7 and the problem went away. Then, at their suggestion, I let Software Update reinstall 10.4.10 and the problem came back.
6. Rebooted the system from a 2nd internal drive running 10.4.9 and the problem went away.
Seems pretty clear to me that this issue is with the OS, yet Apple's support staff insists the problem is "with the data on my boot drive". Thing is, the data on the "problem" boot drive consists of exactly the same applications on the other drives, and only those applications. There ** is no ** data on the boot drive other than the OS and some applications. Yet the other drive I can boot from that runs 10.4.9 and doesn't cause audio input issues contains all sorts of junk.
So, to reiterate, I'm booting from a clean boot drive with nothing but OS 10.4.10 and some pro applications on it and the audio input won't work. I boot from into any other Mac OS on this drive or any other and all is well. Yet this problem is supposedly with my data?
Is anyone else out there seeing issues like this?

I used a UVC-compliant USB Logitech camera (the
Fusion) driverless
under OS X 10.4.9.
FWIW, none of these devices are actually driverless. They rely on drivers either supplied separately by some company (not necessarily the vendor of the product) or bundled into the OS. Usually, the bundled drivers are based on open standards like UVC mentioned in the link. Apple writes a lot of the bundled driver code itself but some of it comes from outside sources like LSI or Intel.
An unfortunate fact of life is that open standards are not always as well defined as they ideally should be. Another is that certain companies sometimes set their own standards that aren't quite compatible with open ones, sometimes to implement real or imagined improvements on an open standard, sometimes to gain a marketing advantage.
The good news is that the market usually -- eventually -- favors the open standard. The bad news is that it often takes some time for this to happen, leaving users -- particularly Mac users, who still represent a smaller market force than those using Windows -- without a solution for an uncomfortably long period of time.
Your best or only recourse for now may be to downgrade to 10.4.9 until this gets resolved, but you should also take into account that not all users are having these problems so it may be something other than the update itself that is causing the problem. I just video chatted with a colleague using an Intel Mac mini who is having no problems whatsoever -- we are both puzzled why he is unaffected while others are.
Sorry this couldn't be of more help.

Problems after upgrading to vista premium from basic

i just upgraded my laptop to vista premium from basic. a couple of changes worth to mention: the system seems to be more stable after upgrading. and ram usage reduced to roughly 47% from 55%.
bad side: can not use thinkvantage to recover my laptop to factory condition. it seems that the option has been removed. and while start-up, if i press the blue ThinkVantage bottom, the system does not go to normal rescue and recovery program.
the other problem i have is the system says i recently changed the system password (seems sth to do with the client security solution software). but i did not.and i need to verify the password. and problem appears, the system says my password is wrong.
any thoughts on these problems?
thx

I agree with Cedric on the repair disk. As you have installed a "different" OS the Master Boot Record has been changed resulting in the loss of the function.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Pre7 after upgrade from Vista to Windows 7 (Ultimate 64bit)

I recently upgraded my Vista Ultimate (64bit) computer to Windows 7 Ultimate (64bit). This was an upgrade, not a clean, fresh install. Today is the first time I have tried to run PRE7 under Windows 7. Prior to the upgrade, I had no problems to speak of with PRE7 and the PhotoShop.com Plus account that I set up with it. Now whenever I start PRE7 under Windows 7, I get the "Install Full Content" dialog informing me that a reduced set of content has been installed and that I need to install the full set of content from the installation DVD. Now believe me when I say that the full set of content was installed under Vista and that I never got such a dialog box prior to Windows 7. In addition, after clicking OK to continue, the PhotoShop.com membership did not log on automatically as I am used to it doing. I don't remember exactly now what I had to do, but to the best of my recollection, after I logged on to my account it was telling me that I needed to verify my account, which I did. I subsequently received an email with a verification link in it. After clicking on the link my account was verified and now when I start PRE7, it automatically logs me on to my PhotoShop.com account, as I am used to it doing. I still get the "Install Full Content" dialog, though. I thought I would ask in this forum if anyone else has experienced these two anomalous behaviors after ungrading to Windows 7, before I attempt to go thorough the motions of actually reinstalling the full content, which should not actually be necessary.
Thank you,
Charles Lawrence

Why it's happening is a mystery. My guess would be that the upgrade in the OS is part of the problem, but that is just a guess. Some have reported that Win7 does the upgrade thing better than any previous OS, but others report all sorts of odd problems, when doing it this way.
If you have the DVD, then I'd try a Repair Install, to see if it picks up the Functional Content.
Otherwise, I am at a loss as to why, when you upgraded your OS, PrE 7 lost the link to that material.
Good luck,
Hunt

Camera not working after upgrading to vista ultimate

So I upgraded to vista ultimate and since then the camera hasn't worked. I don't have it turned off, and i went to device setting to see if it was working properly and also tried updating the driver. Everything seems to be in order, the camera just doesn't work. anyone have any ideas?

is it ultimate 64? if you dl the driver from lenovo's website it probably doesn't support 64bit, i had tons of trouble with my camera before too but eventually it kinda fixed itself. I think the device just wasn't being recognized by windows and the driver never completed installation but after a few reboots it gave me a notification saying that it was indeed finished installing and since then it worked great.

Can't print from IE 8 after upgrading from Vista to Windows 7

My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessed across a local network.
I recently upgraded from Vista Enterprise to Windows 7 Enterprise.
Everything still prints fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page from IE, it prints only the page header, and otherwise the sheet is empty. This symptom occurs on both printers. (And of course this worked fine before the upgrade.)
Any ideas? Thanks for any help.
Jeff
This question was solved.
View Solution.

(same poster)
If anyone else is having this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606...).
Specifically, the following steps solved the problem:
1. If it doesn't already exist, create a directory named "Low" in your directory "C:\Users\<your_user_name>\AppData\Local\Temp\".
2. From a command prompt, issue this command: ICACLS C:\Users\<your_user_name>\AppData\Local\Temp\Low /setintegritylevel (OI)(CI)low
Jeff

Cleanup after upgrading from Vista to Windows 7

I have installed (upgraded from Vista) Windows 7 on my X301 machine. I am wondering if thedata on the drives Q(lenovo) and S(Servicev003) is still needed?

only if you want to recover to vista the Q partition is used for creating recovery disc the s partition is used for recovering to factory state which would be vista
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Bluetooth not working after upgrading to Vista

Hi All,
I called tech support and they pretty much informed me that I'm s.o.l. so I thought I'd turn here. I'm running a T60 (model 8744). I was running Win XP and getting blue screened to death. So I upgraded to Vista Business. I now have everything re-installed and working...except for Bluetooth. Lenovo support says there aren't any Vista drivers for Bluetooth on this model. IS THAT RIGHT? At this point I'm pretty shocked. I figured by now they would have completed a Vista driver pack for this laptop considering it's a couple years old now. Anyone have any suggestions on other drivers that I can use successfully?

It seems that the mouse has still stored the pairing information (normally it should loose it if the battery was removed).
The mouse tries to connect to the last connection, but the other side (PC) has not the information anymore.
Could you try to pair the mouse with any other PC or notebook before you try to pair it with your notebook again ?
Furthermore increase the security for this test by enabling the following option:
Right click Bluetooth system tray icon > Options > Security > Custom Level > Mode: Link level enforced security

HP Pavilion DV5000 : Conexant Audio HD sound not working after upgrade XP to Windows 7

On HP support site there are no drivers for Windows 7 for Conexant Audio HD soundcard in HP Pavilion DV5000.
Have tried installing Vista drivers in stead, does not work.
Have tried renaming unzipped Vista files to camcaud.sys & camchal.sys and copied them into Windows/System32/Drivers and reboot, does not work.This is the only solution I found after reading forums for several hours, but does not work.
Would very much appreciate help.
Thanks.
This question was solved.
View Solution.

My solution is here (registry editing required):
Conexant audio (vendor 14F1, device 5047) – no sound on Windows 7 – solved

No audio on HP Pavilion 771n after upgrading to Vista

Similar Messages

Maybe you are looking for