No audio on my Dell PC

I installed DriverUpdate last March.  Suddenly getting messages ITunes not installed properly. and No audio devices detected, Codec error 10.  ?  any thoughts. Thx

Probably the driver is not loaded. With hwd or hwdetect you can find out which driver you need and then modprobe that module.
Maybe your hardware is to new for the install iso and you need to use the 2008.06 install-cd.
Zl.
/EDIT: it looks as though the driver for your gigabit network-controller (Atheros L1E) is only very recently added to the kernel. You should try the very latest installcd, made specifically for the FROSCON-conference (see http://bbs.archlinux.org/viewtopic.php?id=53738)
Last edited by zenlord (2008-08-27 10:40:14)

Similar Messages

  • Urgent!!! ***Audio driver for Dell dimension 4300 running on Windows 7***?

    ? Hi, I just upgraded my Dell dimension 4300 which was running on Windows XP pro to Windows 7 32 bit. Everything is working fine except my sound. I cannot see my audio driver through system information or anything. So I had to open my CPU tower and found out that my sound card is Sound blaster li've model CT4780. Can anyone please tell me how do I use this card with windows 7. I don't know if it will work with Windows Vista driver and I couldn't find a driver for it. I went to dell's website and that driver didn't work, probably was not compatible with Windows 7. Now in my Device manager setting I see these drivers with question mark
    - Ethernet controller
    - PCI simple communication controller
    - Multimedia audio controller
    My bios is A04. Can anyone please help me with that. I searched everywhere possible for a solution, but couldn't find one. I will really appreciate if someone can save me.
    Thank you

    You need a lot more than just the non-existant driver for your sound card, you also need motherboard/chipset drivers and there aren't any for that either. You computer has the Intel 845 chipset in it,
    <a rel="nofollow" target="_blank" href="http://support.dell.com/support/edocs/systems/dim4300/specs.htm#0572"]http://support.dell.com/support/edocs/systems/dim4300/specs.htm#0572[/url]
    which Intel declared "end of life" a few years ago. Without a working chipset driver it doesn't matter whether you have working sound drivers or not.
    In your case you would be far better off holding off on Windows 7 until such a time as you have a new computer that actual has Windows 7 support.

  • Audio Input on Dell Mini 10v

    The audio input on my Dell Mini 10v doesn't work. These seems to be a known problem - in Ubuntu, they applied a patch to get it working in Karmic: https://bugs.launchpad.net/ubuntu/+sour … bug/394793
    I confirmed by booting Ubuntu from USB that audio is working.
    Does anyone know how I can get this to work in Arch? This stuff is really over my head. The input device shows up in alsa, but not audio is there. This patch is needed to set the input level apparently.
    Thanks!

    Bump - someone must be able to point me in the right direction, I know there's a lot of smart kernel type people around here . . .

  • Audio Editing in Dell 11 3247

    Sir
    I am having Dell 11 3147 run by Windows 8.1. My dell is within warranty.
    Now I like to get installed the driver & software of Dell or Dell supported if nay so that I may edit the audio files recorded in my laptop.
    Matter is very urgent for me. Please provide support.
    Damodar Chakrabarti
    Advocate

    advocate.damodar
    Please provide support.
    Hello Damodar Chakrabarti.
    Dell does not provide a program for editing audio files. It may necessary for you to acquire a third party graphical editing program.  [Graphical editing means audio editing is performed by making changes to a pictorial representation of the audio, usually as an amplitude waveform.]
    The most popular free graphical editor is named Audacity. Link to the Wikipedia article on Audacity
    .There are other free editors available too. Link to Wikipedia list of free audio editors
    In addition to the free programs, there are editing programs that you can buy. I use one of those (Cakewalk Sonar) because I find its user interface to be a bit more sophisticated and easier to use than that of the free programs. Link to Wikipedia list of audio editors both free and proprietary
    advocate.damodar
    Matter is very urgent for me.
    Damodar Chakrabarti., I hope this information is of use to you. If I can assist further please let know. Audio editing is a particular hobby of mine. However I must say that there can be a steep learning curve required for using an audio editor initially. If time is an urgent consideration you might need to find someone locally who is familiar with audio editing techniques.

  • No audio T520 displayport Dell U3011

    Hi,
    I've connected my T520 to Dell U3011 30" through a DisplayPort cable, using discrete graphics. 
    I'm not able to get  audio from the monitor. 
    From Sound Settings, I can see Dell U3011 (4-High Definition audio device is enabled), and also can see the bars moving when I play any audio. 
    I also checked the Dell U3011, and the audio is set to 2.0. 
    Ccould you please give your comments/suggestions?
    Thanks1

    There are a number of threads gone on the Display port and DP to HDMI adapter.
    In a nut shell many don't pass sound.
    T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
    Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
    Windows 7 Home Prem - 64bit w/8GB DDR3

  • Sound Blaster X-F Audio came with Dell Compu

    It was working fine, then all of a sudden the other day, the sound disappeared.
    I finally gave up and reinstalled the CD.
    Prior to having this problem, I was able to use the Mode Switcher, Mixer, etc. on the Volume Panel Icon. Now it says "The current audio device is not supported by the application" Do you want to select another audio device? If I say Yes, it pops up and says : The Creative Audio Device module cannot be launched. The module may be missing from your system. You may need to reinstall your application.
    I already had used the repair to fix the application.
    I also did the repair and selected the devices I wanted and I watched them install. I saw the Mode Switcher installing, but when I finished installing, I get an error saying that it may not have installed correctly, do you want to default to Microsoft windows.
    Very confusing.
    Every thing seems to be working correctly.

    They answered but i'm not quite happy with that. They told me that the card shouldn't work properly if i installed two operating systems on my pc. I don't know why this is but it's "bad news" Anyway if anyone has found? any solution don't hesitate to tell me!
    Yours,
    Greg
    Message Edited by gergokee on 07-3-2008 02:26 AM

  • ITunes Knocks Out Vista Audio?

    My mom just received a new iPod Shuffle, as well as a new computer with Windows Vista Home. Ever since iTunes was installed, the audio on the computer will go out completely after about an hour or so and doesn't come back until we reboot. We've updated audio drivers, contacted Dell customer support and no one knows what the problem is. Could this be caused by iTunes and Vista not being compatible? If so, is there any solution yet?
    Thanks for any help.
    Dell E521   Windows Vista Home

    I have a similar issue with iTunes on my PC. A song will be playing just fine then all of a sudden the audio is severely degraded (lots of static and very choppy). This continues for a bit (~30sec) then the audio cuts out completely. In fact, I get no audio from any application after this happens. I must log out and log back in.
    iTunes 7.1
    Vista Home Premium
    Gigabyte GA-7N400Pro (nforce2 chipset)
    Maxtor 250GB HD
    Maxtor 200GB USB HD
    Micron 2GB DDR
    Sony DVD RW (DRU-720A)
    Sony CD-RW (CRX225E)
      Other OS   Vista Home Premium

  • Connections for Inspire 5200 on a Dell Dimension

    Is anyone aware of the proper connections to utilize the built-in 5.1 audio on a Dell Dimension 8400?
    Are there any suggestions on which speaker system would be the best for a Dell Dimension if I should decide to replace my speakers?
    Dell's online owner's manual shows that the black jack is for surround and the white jack is for the center. I have the jack for the speaker system's FRONT speakers plugged into the surround jack and the CENTER/WOOFER plugged into the center jack.
    It would be nice to have real 5.1 sound coming from my computer since it's supposed to be able to handle it without using an Audigy card. I have an Audigy card in another computer, but I don't want to pull it if I don't have to.

    cconklin,
    Not sure about your onboard audio but you should connect the onboard audio Front jack to the speaker system front input jack, Rear/Surround jack to the speaker rear input jack and lastly the Center jack to the speaker Center/Subwoofer input.
    Jason

  • *FIXED* No sound and 'No Audio Device' in Control Panel. *FIX

    I?m having a problem with my sound. Basically all I get is a system sound, which means no sounds from itunes but the error prompt sounds still play. I?m tempted to say that this is a detection issue because of several things:
    -First, when looking in the ?sounds and audio devices? in the control panel I get grayed out selections and a ?no audio device?.
    -Secondly, when running the directX diagnostic tool (typing ?dxdiag? in the ?run? window) I get several troubling indications. First under device I have no manufacturer or product ID. Second under drivers I have (copied from dxdiag text file):
    Driver Name: ctaud2k.sys
    Driver Version: 5.2.000.96 (English)
    Driver Attributes: Final Retail
    WHQL Logo'd: Yes
    Date and Size: 8//2006 4:45:38, 499584 bytes
    Other Files:
    Seems hunky-doorey but then I have a note at the bottom that reads:
    Sound Test Result: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
    I have seen another similar post that seemed to have the same problem, but they didn?t provide much information and the fix was to pull out the audio card, run start up, turn it off, and then put it back in and run start up. If this is what needs to be done, could I have a picture or something of what the sound card looks like?
    This problem started when I tried to update my sound card and since then my sound has been? possessed? or prone to working at sometimes and then (most of the time)failing at others.
    Here is the dxdiag.txt file without the lengthy directShow filters and directx components:
    System Information
    Time of this report: 5/9/2007, 2:8:45
    Machine name: GURU7892COMPUTE
    Operating System: Windows XP Home Edition (5., Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254)
    Language: English (Regional Setting: English)
    System Manufacturer: Dell Computer Corporation
    System Model: Dimension XPS
    BIOS: Default System BIOS
    Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz (2 CPUs)
    Memory: 022MB RAM
    Page File: 436MB used, 2026MB available
    Windows Dir: C:\WINDOWS
    DirectX Version: DirectX 9.0c (4.09.0000.0904)
    DX Setup Parameters: Not found
    DxDiag Version: 5.03.2600.280 32bit Unicode
    DxDiag Previously: Crashed in system information (stage 3)
    DxDiag Notes
    DirectX Files Tab: No problems found.
    Display Tab : No problems found.
    Sound Tab : DirectSound test results: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
    Music Tab: DirectMusic test results: All tests were successful.
    Input Tab: No problems found.
    Network Tab: No problems found.
    DirectX Debug Levels
    Direct3D: 0/4 (n/a)
    DirectDraw: 0/4 (retail)
    DirectInput: 0/5 (n/a)
    DirectMusic: 0/5 (n/a)
    DirectPlay: 0/9 (retail)
    DirectSound: 0/5 (retail)
    DirectShow: 0/6 (retail)
    Display Devices
    Card name: RADEON 9800 SERIES
    Manufacturer: ATI Technologies Inc.
    Chip type: RADEON 9800 PRO AGP (0x4E48)
    DAC type: Internal DAC(400MHz)
    Device Key: Enum\PCI\VEN_002&DEV_4E48&SUBSYS_3002002&REV_00
    Display Memory: 28.0 MB
    Current Mode: 52 x 864 (32 bit) (75Hz)
    Monitor: Plug and Play Monitor
    Monitor Max Res: 600,200
    Driver Name: ati2dvag.dll
    Driver Version: 6.4.000.6660 (English)
    DDI Version: 9 (or higher)
    Driver Attributes: Final Retail
    Driver Date/Size: 2/6/2006 9:50:46, 26368 bytes
    WHQL Logo'd: Yes
    WHQL Date Stamp: n/a
    VDD: n/a
    Mini VDD: ati2mtag.sys
    Mini VDD Date: 2/6/2006 9:50:29, 98464 bytes
    Device Identifier: {D7B7EE2-0D08-CF-B669-080AC2CB35}
    Vendor ID: 0x002
    Device ID: 0x4E48
    SubSys ID: 0x3002002
    Revision ID: 0x0000
    Revision ID: 0x0000
    Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_B ModeWMV8_A ModeWMV9_B ModeWMV9_A
    Deinterlace Caps: {6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
    {335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    {3C5323C-6FB7-44F5-908-056BF2EE449D}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
    {552C0DAD-CCBC-420B-83C8-74943CF9FA6}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
    {6E8329FF-B642-48B-BCF0-BCB659E255F}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdapti've
    {335AA36E-7884-43A4-9C9-7F87FAF3E37E}: Format(In/Out)=(NV2,0x323564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
    Registry: OK
    DDraw Status: Enabled
    D3D Status: Enabled
    AGP Status: Enabled
    DDraw Test Result: Not run
    D3D7 Test Result: Not run
    D3D8 Test Result: Not run
    D3D9 Test Result: Not run
    Sound Devices
    Description: SB Audigy 2 Audio [CF00]
    Default Sound Playback: Yes
    Default Voice Playback: No
    Hardware ID: PCI\VEN_02&DEV_0004&SUBSYS_00302&REV_04
    Manufacturer ID:
    Product ID:
    Type: WDM
    Driver Name: ctaud2k.sys
    Driver Version: 5.2.000.96 (English)
    Driver Attributes: Final Retail
    WHQL Logo'd: Yes
    Date and Size: 8//2006 4:45:38, 499584 bytes
    Other Files:
    Driver Provider: Creative
    HW Accel Level: Standard
    Cap Flags: 0xF5F
    Min/Max Sample Rate: 4000, 92000
    Static/Strm HW Mix Bufs: 64, 62
    Static/Strm HW 3D Bufs: 64, 62
    HW Memory: 0
    Voice Management: No
    EAX(tm) 2.0 Listen/Src: No, No
    I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
    Registry: OK
    Sound Test Result: Failure at step 3 (DirectSoundCreate): HRESULT = 0x88780078 (No driver)
    Sound Capture Devices
    Description: SB Audigy 2 Audio [CF00]
    Default Sound Capture: No
    Default Voice Capture: No
    Driver Name: ctaud2k.sys
    Driver Version: 5.2.000.96 (English)
    Driver Attributes: Final Retail
    Date and Size: 8//2006 4:45:38, 499584 bytes
    Cap Flags: 0x4
    Format Flags: 0xFFF
    DirectMusic
    DLS Path: C:\WINDOWS\SYSTEM32\drivers\GM.DLS
    DLS Version: .00.006.0002
    Acceleration: n/a
    Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
    SB Audigy 2 DirectMusic Synthesizer [CF00], Hardware (Kernel Mode), Output, DLS, Internal
    SB Audigy 2 Audio [CF00], Software (Kernel Mode), Output, DLS, Internal
    Registry: OK
    Test Result: All tests were successful.
    DirectInput Devices
    Device Name: Mouse
    Attached:
    Controller ID: n/a
    Vendor/Product ID: n/a
    FF Driver: n/a
    Device Name: Keyboard
    Attached:
    Controller ID: n/a
    Vendor/Product ID: n/a
    FF Driver: n/a
    Poll w/ Interrupt: No
    Registry: OK
    USB Devices
    + USB Root Hub
    | Vendor/Product ID: 0x8086, 0x24D7
    | Matching Device ID: usb\root_hub
    | Service: usbhub
    | Driver: usbhub.sys, 8/3/2004 23:08:42, 57600 bytes
    | Driver: usbd.sys, 8/29/2002 03:00:00, 4736 bytes
    Gameport Devices
    PS/2 Devices
    + Logitech PS/2 Keyboard
    | Matching Device ID: *pnp0303
    | Upper Filters: L8042Kbd
    | Service: i8042prt
    | Driver: i8042prt.sys, 8/3/2004 23:4:36, 52736 bytes
    | Driver: kbdclass.sys, 8/3/2004 22:58:32, 24576 bytes
    | Driver: L8042Kbd.sys, 2/0/2004 2:47:58, 3056 bytes
    |
    + Terminal Server Keyboard Driver
    | Matching Device ID: root\rdp_kbd
    | Upper Filters: kbdclass
    | Service: TermDD
    | Driver: termdd.sys, 8/4/2004 0:0:07, 40840 bytes
    | Driver: kbdclass.sys, 8/3/2004 22:58:32, 24576 bytes
    |
    + HID-compliant MX58 Optical Mouse
    | Vendor/Product ID: 0x046D, 0xC0E
    | Matching Device ID: hid\vid_046d&pid_c0e
    | Upper Filters: LMouKE
    | Lower Filters: LHidKE
    | Service: mouhid
    | Driver: mouhid.sys, 8/7/200 3:48:00, 260 bytes
    | Driver: mouclass.sys, 8/3/2004 22:58:32, 23040 bytes
    | Driver: LHidKE.Sys, 2/0/2004 2:48:46, 24704 bytes
    | Driver: LMouKE.Sys, 2/0/2004 2:48:40, 68992 bytes
    | Driver: KHALMNPR.Exe, 2/0/2004 2:45:26, 4952 bytes
    |
    + Terminal Server Mouse Driver
    | Matching Device ID: root\rdp_mou
    | Upper Filters: mouclass
    | Service: TermDD
    | Driver: termdd.sys, 8/4/2004 0:0:07, 40840 bytes
    | Driver: mouclass.sys, 8/3/2004 22:58:32, 23040 bytes
    DirectPlay Service Providers
    DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
    DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
    DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
    DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.280)
    Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
    IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.280)
    Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)
    Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.280)
    DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
    DirectPlay Test Result: Not run
    Registry: OK
    DirectPlay Adapters
    DirectPlay8 Serial Service Provider: COM
    DirectPlay8 Serial Service Provider: COM2
    DirectPlay8 TCP/IP Service Provider: Wireless Network Connection - IPv4 -
    DirectPlay Voice Codecs
    Voxware VR2 .4kbit/s
    Voxware SC06 6.4kbit/s
    Voxware SC03 3.2kbit/s
    MS-PCM 64 kbit/s
    MS-ADPCM 32.8 kbit/s
    Microsoft GSM 6.0 3 kbit/s
    TrueSpeech(TM) 8.6 kbit/s
    DirectPlay Lobbyable Apps
    Age of Empires II (DX7) - Registry: OK, ExeFile: Empires2. ICD (0.4.0022.072)
    Age of Empires II - The Conquerors Expansion (DX7) - Registry: OK, ExeFile: \age2_x.icd (0.07.0025.064)
    Dungeon Siege 2 (DX7) - Registry: OK, ExeFile: DS2.icd ()
    Dungeon Siege II Demo (DX7) - Registry: OK, ExeFile: DS2.icd ()
    MechWarrior Black Knight (DX7) - Registry: OK, ExeFile: MW4x.exe (45.05.000.070)
    MechWarrior Vengeance (DX7) - Registry: OK, ExeFile: MW4. ICD (.30.0004.908)
    Star Wars JK II Jedi Outcast (DX7) - Registry: OK, ExeFile: jk2mp.exe ()
    WDM Streaming Data Transforms:
    Microsoft Kernel Acoustic Echo Canceller,0x00000000,0,0,,
    Microsoft Kernel GS Wavetable Synthesizer,0x00200000,,,,5.03.2600.280
    Microsoft Kernel DLS Synthesizer,0x00200000,,,,5.03.2600.280
    Microsoft Kernel DRM Audio Descrambler,0x00200000,,,,5.03.2600.280
    Video Compressors:
    WMVideo Encoder DMO,0x00600800,,,,
    WMVideo8 Encoder DMO,0x00600800,,,,
    MSScreen encoder DMO,0x00600800,,,,
    WMVideo8 Encoder DMO,0x00600800,,,,
    WMVideo9 Encoder DMO,0x00600800,,,,
    MSScreen 9 encoder DMO,0x00600800,,,,
    DV Video Encoder,0x00200000,0,0,qdv.dll,6.05.2600.280
    Indeo? video 5.0 Compression Filter,0x0000000,,,ir50_32.dll,5.2820.005.0058
    Indeo? Video 5.2 Compression Filter,0x0000000,,,ir50_32.dll,5.2820.005.0058
    MJPEG Compressor,0x00200000,0,0,quartz.dll,6.05.2600.274 9
    3ivx D4 4.0.4,0x00200000,,,qcap.dll,6.05.2600.280
    Cinepak Codec by Radius,0x00200000,,,qcap.dll,6.05.2600.280
    DivX ;-) MPEG-4 Low-Motion,0x00200000,,,qcap.dll,6.05.2600.280
    DivX ;-) MPEG-4 Fast-Motion,0x00200000,,,qcap.dll,6.05.2600.280
    DivX? 6.. Codec (2 Logical CPUs),0x00200000,,,qcap.dll,6.05.2600.280
    Intel 4:2:0 Video V2.50,0x00200000,,,qcap.dll,6.05.2600.280
    Intel Indeo(R) Video R3.2,0x00200000,,,qcap.dll,6.05.2600.280
    Intel Indeo? Video 4.5,0x00200000,,,qcap.dll,6.05.2600.280
    Ligos Indeo? XP Video 5.2,0x00200000,,,qcap.dll,6.05.2600.280
    Intel IYUV codec,0x00200000,,,qcap.dll,6.05.2600.280
    Microsoft H.26 Video Codec,0x00200000,,,qcap.dll,6.05.2600.280
    Microsoft H.263 Video Codec,0x00200000,,,qcap.dll,6.05.2600.280
    Microsoft MPEG-4 Video Codec V2,0x00200000,,,qcap.dll,6.05.2600.280
    Microsoft MPEG-4 Video Codec V3,0x00200000,,,qcap.dll,6.05.2600.280
    Microsoft MPEG-4 Video Codec V,0x00200000,,,qcap.dll,6.05.2600.280
    Microsoft RLE,0x00200000,,,qcap.dll,6.05.2600.280
    Microsoft Video ,0x00200000,,,qcap.dll,6.05.2600.280
    Microsoft Windows Media Video 9,0x00200000,,,qcap.dll,6.05.2600.280
    XviD MPEG-4 Codec,0x00200000,,,qcap.dll,6.05.2600.280
    DivX? 6.. YV2 Decoder,0x00200000,,,qcap.dll,6.05.2600.280
    Audio Compressors:
    WMA Voice Encoder DMO,0x00600800,,,,
    WM Speech Encoder DMO,0x00600800,,,,
    WMAudio Encoder DMO,0x00600800,,,,
    Indeo? Audio Software,0x00500000,,,iac25_32.ax,2.00.0005.0054
    Vorbis Encoder,0x00200000,,,OggDs.dll,0.09.0009.0005
    IAC2,0x00200000,,,quartz.dll,6.05.2600.2749
    Lernout & Hauspie CELP 4.8kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
    Lernout & Hauspie SBC 8kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
    Lernout & Hauspie SBC 2kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
    Lernout & Hauspie SBC 6kbit/s,0x00200000,,,quartz.dll,6.05.2600.2749
    IMA ADPCM,0x00200000,,,quartz.dll,6.05.2600.2749
    PCM,0x00200000,,,quartz.dll,6.05.2600.2749
    Ogg Vorbis (mode),0x00200000,,,quartz.dll,6.05.2600.2749
    Ogg Vorbis (mode2),0x00200000,,,quartz.dll,6.05.2600.2749
    Ogg Vorbis (mode3),0x00200000,,,quartz.dll,6.05.2600.2749
    Ogg Vorbis (mode+),0x00200000,,,quartz.dll,6.05.2600.2749
    Ogg Vorbis (mode2+),0x00200000,,,quartz.dll,6.05.2600.2749
    Ogg Vorbis (mode3+),0x00200000,,,quartz.dll,6.05.2600.2749
    Microsoft ADPCM,0x00200000,,,quartz.dll,6.05.2600.2749
    ACELP.net,0x00200000,,,quartz.dll,6.05.2600.2749
    DSP Group TrueSpeech(TM),0x00200000,,,quartz.dll,6.05.2600.2 749
    Windows Media Audio V,0x00200000,,,quartz.dll,6.05.2600.2749
    Windows Media Audio V2,0x00200000,,,quartz.dll,6.05.2600.2749
    GSM 6.0,0x00200000,,,quartz.dll,6.05.2600.2749
    Messenger Audio Codec,0x00200000,,,quartz.dll,6.05.2600.2749
    Microsoft G.723.,0x00200000,,,quartz.dll,6.05.2600.2749
    CCITT A-Law,0x00200000,,,quartz.dll,6.05.2600.2749
    CCITT u-Law,0x00200000,,,quartz.dll,6.05.2600.2749
    MPEG Layer-3,0x00200000,,,quartz.dll,6.05.2600.2749
    Midi Renderers:
    Default MidiOut Device,0x00800000,,0,quartz.dll,6.05.2600.2749
    WDM Streaming Capture Devices:
    SB Audigy 2 Audio [CF00],0x00200000,3,2,,5.03.2600.280
    WDM Streaming Rendering Devices:
    SB Audigy 2 DirectMusic Synthesizer [CF00],0x00200000,,,,5.03.2600.280
    SB Audigy 2 Sw Synth [CF00],0x00200000,,,,5.03.2600.280
    SB Audigy 2 Synth A [CF00],0x00200000,,,,5.03.2600.280
    SB Audigy 2 Synth B [CF00],0x00200000,,,,5.03.2600.280
    SB Audigy 2 Audio [CF00],0x00200000,3,2,,5.03.2600.280
    BDA Network Providers:
    Microsoft ATSC Network Provider,0x00200000,0,,msdvbnp.ax,6.05.2600.280
    Microsoft DVBC Network Provider,0x00200000,0,,msdvbnp.ax,
    Microsoft DVBS Network Provider,0x00200000,0,,msdvbnp.ax,6.05.2600.280
    Microsoft DVBT Network Provider,0x00200000,0,,msdvbnp.ax,
    BDA Transport Information Renderers:
    BDA MPEG2 Transport Information Filter,0x00600000,,0,psisrndr.ax,6.05.2600.280
    MPEG-2 Sections and Tables,0x00600000,,0,mpeg2data.ax,
    WDM Streaming Mixer Devices:
    Microsoft Kernel Wave Audio Mixer,0x00000000,0,0,,
    BDA CP/CA Filters:
    Decrypt/Tag,0x00600000,,0,encdec.dll,6.05.2600.280
    Encrypt/Tag,0x00200000,0,0,encdec.dll,6.05.2600.280
    XDS Codec,0x00200000,0,0,encdec.dll,6.05.2600.280
    Audio Renderers:
    CyberLink Audio Renderer for Dell,0x00200000,,0,cladr.ax,3.05.0000.2409
    Default DirectSound Device,0x00800000,,0,quartz.dll,6.05.2600.2749
    Default WaveOut Device,0x00200000,,0,quartz.dll,6.05.2600.2749
    DirectSound: SB Audigy 2 Audio [CF00],0x00200000,,0,quartz.dll,6.05.2600.2749
    WDM Streaming System Devices:
    SB Audigy 2 DirectMusic Synthesizer [CF00],0x00200000,,,,5.03.2600.280
    SB Audigy 2 Sw Synth [CF00],0x00200000,,,,5.03.2600.280
    SB Audigy 2 Synth A [CF00],0x00200000,0,2,,5.03.2600.280
    SB Audigy 2 Synth B [CF00],0x00200000,,,,5.03.2600.280
    SB Audigy 2 Audio [CF00],0x00200000,2,2,,5.03.2600.280Message Edited by guru7892 on 05-20-20072:43 PM
    Message Edited by guru7892 on 05-24-200705:55 PM

    I found that once you reinstall your sound card you need to make sure you hook everything back up correctly.
    basically all you need to do is run a start up with your sound card out ofyou computer and then re-run start up with the card back in.

  • In need of some audio help

    Im fairly new to Premiere and haven't really encountered this problem before. I used a Nikon E4200 to create this video and when I play back the audio the sound cuts out where I've highlighted the track. If anybody could help me figure out what this means it would be greatly appreciated. thanks.

    Try and drag in just the audio track into the timeline from the source monitor. (Re- Open the clip in the source monitor then use the Speaker Icon)
    Drag it on top of the existing ( overlay it) or onto a new track then trun off the old track  (or delete that audio - alt--click >del).

  • How to solve High Definition Audio Device issue on Vostro 5470

    I have a Vostro 5470 and after installing Windows 8.1 Professional, I'm getting the following issue.
    "This device cannot start. (Code 10)
    {Operation Failed}
    The requested operation was unsuccessful."
    Does any one have any idea how to fix this? I have downloaded the most recent version of the drive from dell support site, but nothing!

    Make sure the Windows Audio Service is running.
    vmrocha
    I have downloaded the most recent version of the drive from dell support site
    You can only get the Realtek audio driver from Dell, not the High Definition Audio Device driver. That one is the Windows native audio driver. To update it you would have to let Windows go online to search for an update from Microsoft.
    From your screen shot it appears that both the Realtek audio driver and the Windows native audio driver ("High Definition Audio Device") are both showing. Normally only one would show up in the Device Manager. I would try re-installing Windows and not installing any Realtek driver. Without a Realtek driver Windows will install its native driver and produce audio. If it failed to do that then the error would be due to hardware failure or some kind of problem within Windows.

  • Inspiron 3537 no audio recording

    I have a Inspiron 3537-4864 laptop. The in-built microphone isn't working at all.
    The device is shown green in the audio settings, its default device also. I disabled and uninstalled both mic and webcam devices and drivers. Its not muted either. I tried with skype, windows 8.1 audio recording and dell webcam central. Not recording anything. The drivers are up-to-date (Audio_Driver_5F22P_WN_6.0.1.7023_A00).
    Thanks the help in advance.

    Hello. There is not an easy or reliable way to test the mic. You can test the audio driver by switching from the Realtek audio driver to the Windows native audio driver.
    1. Open the Device Manager (Control Panel>Device Manager).
    2. Expand the "Sound, video & game controllers" and right click on "Realtek High Definition Audio".
    3. Select to "Update Driver Software".
    4. Click on "Browse my computer for driver software".
    5. Click "Let me pick from a list of drivers on my computer".
    6. Put a check in the box "Show compatible hardware" if not already checked.
    7. In the list of devices, click "High Definition Audio Device" (the native driver).
    8. Click "Next".
    9. On the Update Driver Warning box, click "Yes" (install the driver).
    10. Restart the laptop if prompted. If not prompted, then no need to restart.
    [To get back to the Realtek driver,  do it again but reverse the names in steps 2 and 7.]
    This tests the driver because if you have the exact same symptoms with both drivers, there is a very small probability that both of them are faulty in the same way.
    Make sure that Microphone is selected as the default recording device. If two of them, one is the external jack mic which usually cannot work with the native driver.
    Right click on the internal mic and select Properties. Select the Advanced tab. Uncheck the Exclusive Mode boxes.
    Try making a test recording using Windows Sound Recorder (not a voip application). If no luck then there is a good chance there is hardware failure.Use a strong light to examine the mic to try and see if it has been displaced or something is covering it. Sometimes it helps to open the bezel and reseat the webcam's connection.
    The gold standard for determining if it is a hardware problem is to perform a system recovery (reset the laptop back to the factory configuration). When doing that does not solve a problem that did not exist when the laptop was new then it has had a hardware failure since then.

  • Audio in conversazione iphone 5 non funziona

    come riparare l'audio in conversazione  dell'iphone 5?

    I believe you can. at least I've done it before

  • Creative ALchemy 1.25.10 released!

    "Creative ALchemy .25.0 released!(Hi everyone,
    The Creative ALchemy .25.0 is available for download now.
    Creative ALchemy .25.0
    Filesize : 8.2MB
    Release date : 20 Mar 09
    File Name : ALMY_PCVTAPP_LB__25_0.exe
    Creative ALchemy restores 3D audio and EAX&reg; effects for certain DirectSound&reg;3D games in Windows Vista. With Creative ALchemy, you can:
    * enable the DirectSound3D game audio to be processed by your Sound Blaster audio device to deli'ver EAX effects, 3D audio spatialization, sample rate conversion and hardware audio mixing. Without this, most DirectSound3D games will be reduced to stereo output without any EAX effects.
    * improve 3D audio processing for host-based Sound Blaster audio devices.
    Requirements:
    * Microsoft&reg; Windows Vista with Service Pack
    Notes:
    * Do not install this application if you do not play DirectSound3D games in Windows Vista.
    * To find out more about Creative ALchemy or view the list of DirectSound3D games supported, click here.
    * To install this software
    . Download the file onto your local hard disk.
    2. Close all other Windows applications.
    3. Double-click the downloaded file.
    4. Follow the instructions on the screen.

    Why no changelog?Message Edited by RaduznyKuDeSnik on 03-20-2009 04:4 [email protected]

  • Biostar mobo not recognising Sound blaster cards

    Hi all, Just moved a whole lotta bits from a Dell XPS420 over to a new mobo/case/psu setup.
    Full kit list now:
    Biostar TPower I45 Intel Q6600, with Arctic Cooler Freezer 7 pro
    3Gb RAM
    2x750Gb HD
    Generic (Dell?) GeForce 8800GT, with Thermaltake HR-03GT
    2x DVD Writers Antec 300 Case, with 2 additional Akasa 20mm red LED fans in front.
    Be Quiet! Dark Power Pro 550W psu
    Akasa internal card reader.
    Sound Blaster Audigy (SB0570)
    Vista Home Premium.
    Okay, most things worked fine when I built it. I didn't reinstall the OS, just booted from the hard dri've. I just had to load the drivers for the Biostar website for chipset, LAN.
    Only device that wasn't recognised was the Sound Blaster. I'd disabled on board sound in the BIOS. I thought this odd, as the SB had worked on the old PC, so I knew the drivers worked under Vista.
    I re-downloaded the drivers and tried to reinstall, just in case. The driver install claimed no compatable hardware installed and quit. I checked the BIOS/Manual for any way to enable/disable PCI slots, in case this was the issue, no joy.
    I then tried an old PCI network card in both PCI slots, just to see if it was mobo or card. The NIC was recognised straight away. At this point, I assumed I'd done something stupid and blown teh sound card. Oh well, get another one, slight upgrade to enable me to us the HDA front audio sockets on the case, which would be handy.
    So bought a SB X-Fi Extreme (PCI) card. Installed... and same effect - card not detected. Tried new drivers, tried both slots, nothing. Put the NIC back in - recognised. Either SB card - nada.
    Tried cleansweep to remove all traces of Creative sound card drivers - nothing. Tried on-board audio, this works... but DoW II and Red Alert 3 stutter badly, which is what I got from the on-board audio on the Dell XPS420, and prompted me to go sound card in the first place!
    I even tried the most extreme option - wipe hard dri'ves and reload Vista from scratch. Still wouldn't locate them (I've reverted back to my original Vista build now, from a Windows Home Server backup image).
    Gonna try the SB cards in other PCs at work this week just to confirm if they are working... but the chances of both a previously working card and a brand new one both being broke seem remote...
    So help! I'm not sure what else I'm missing...

    I do understand that they all have supported Vista Drivers, but your website says that some functions may not work under Vista. All I am trying to do is to select a card that all functions work out of the box when I install it with Vista instead of finding out later that all functions do not work under Windows Vista. Here is the statement from your support page:
    Creative is developing Vista driver updates for many of its soundcard products. Many are already available on the web for download and installation to support existing customers. However, after installing an updated Windows Vista driver, some features that work on Windows XP may no longer be available due to changes in the audio architecture for Vista. See below for details specific to your product.
    So what I am asking is Pre-Sales Help to help me select a Sound Card where all functions of the card works under Vista which I will use only for Moves and Music, no games.

Maybe you are looking for

  • Have old Visor Handspring - Would like to get email on it

    I have an old Visor Handspring that I would like to breath new life into (if possible).  Not sure of the exact Model - but it was received in 2000 (This thing has literally been sitting in the draw for the past 8 years - had actually forgot about it

  • Cannot select Contact/Group from Recent Contacts L...

    A group contact in my Recent Contacts list cannot be selected. A few days ago, a group call was held and I missed the initial requests. The 3rd request I accepted. However, the contact list entry still lists it as 2 "new" events, and attempting to cl

  • HT201210 Trying to update my IPAD 2 and keep getting error (9)

    Yesterday I check my IPAD 2 (wifi + 3G) for any APP update, it was downloading and stop, lock up on me. When I turn back on it's showing ITunes hookup. I update my Mac to the lastest ITunes and try to restore and update my IPAD. It was a no-go, keep

  • IRP in Pending State

    Hi Experts, Does putting the IRP in pending state for long time creates latency in the system ? Regards, Lyf lyf4sci

  • Why can't I download file from any websites?

    Whenever I try to download files from filesharing sites like mediafire, I click the download button and the page appears to be loading and nothing happens. After several tries, I found out that while the page is loading, it is actually downloading th