No audio on TV when using HDMI

Hello,
I just bought the Satellite P875-S7200 and I connected it to my HDTV using HDMI. The problem is there is no sound coming out on the TV but there is sound on the laptop.
I've checked the Playback Devices when you right-click the speaker icon from the taskbar and I don't see any HDMI option in there.
How can you switch the audio out to the HDMI?
Please help. Thank you very much.

Satellite P875-S7200
I've checked the Playback Devices .. and I don't see any HDMI option in there.
 Right-click in that box and make sure you have the two items shown below checked.
-Jerry

Similar Messages

  • How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.

    How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.
    I've tried plugging the hdmi into the TV directly and the receiver.
    I get video every time.  HBO to Go , Xfinity, ABC, Youtube, etc...
    just no audio.  Any suggestions? 
    I've tried starting the apps then plugging in the hdmi cable.
    I never tried this before I upgraded to IOS 5.

    Claudiamil-
    I had not tried it with mine since upgrading to iOS 5, so I just did.  I'm using a small Vizio HDTV.  I did not try YouTube, but did try several videos and musical numbers.  In all cases there was sound, including stereo when the source had it.
    I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down.  Dah*veed's suggestion to reset may be what you need.
    Fred

  • Using just the TV screen when using HDMI port?

    Hi,
    I have the Macbook Pro with retina display and I was wondering how I could use just the TV screen when using HDMI port. I don't want mirroring displays, just one on the TV.

    With the TV connected and the MBP plugged into the mains (i.e. not running on battery power) close the lid.  The MBP will go to sleep, wake it up with an external keyboard or mouse - which must be connected in advance, or paired in advance if a bluetooth keyboard/mouse.

  • When using HDMI to HDMI cable the Master Sound Control is locked.

    master sound control is locked when using HDMI to HDMI using an HDTV for the display.
    Although itunes sound control works.  Why is the Master Control locked?

    cpfamilia wrote:
    Hello,
    I am new to OS X and i have tried to adjust the sound when plugged to the secondary monitor through HDMI which of course didn't work.
    I have been using windows and a linux for years now, and everything works seamless.
    I believe that this could be easily solved by Apple as long as their are willing to do it. Having a virtual device for sound control is not that difficult.
    All the bests
    There are two ways to 'solve' this.
    Alter the volume before sending the digital signal down the HDMI connection, this means the signal is no longer exactly as it was originally. Apple's current (apparent) view is that this should be done at the end i.e. playback device not at the originating (Mac) end so as to minimise the number of devices making changes to the signal. Basically 'volume' is the amplitude of a an analogue wave form. (Where else do you think the term 'amp' comes from.)
    Not to alter the volume of the signal at the Mac end but instead to send a signal down the HDMI cable to tell the end i.e. playback device to alter the volume, this uses a standard called CEC (Consumer Electronics Control), unfortunately at the moment no Macs support this standard - it has to be supported at a hardware level so a simple Apple software upgrade to implement this is not possible. I have previously logged an official enhancement request for this with Apple - the more people who do this the more likely it is to be added, since now all Macs include HDMI it might happen at some point.
    As an addendum to option 2 above, see http://www.pulse-eight.com/store/products/104-usb-hdmi-cec-adapter.aspx this would however require software support in whatever application is being used. XBMC for Mac does support it.

  • Can I get audio through iPhone when using apple tv?

    Can I get audio through iPhone when using apple tv?

    What do you mean exactly? Are you wanting to output the audio to your iPhone while say watching a video on your Apple TV?  If so, I'm afraid it's not possible.  However, you should post this in the Apple TV forums for a better confirmation on then.  There are some prettty knowledgable people who hang out there.
    https://discussions.apple.com/community/appletv
    B-rock

  • No audio from ipad2 to TV when using HDMI

    No audio from ipad2 to TV when using HDMI

    Hi
    I'm having exactly the same problem.
    I have 2009 macpro
    I worked out I can get visual from HDMI 3 and no picture.
    Sound comes though PC1
    Did you fix the problems?

  • Audio levels on an external monitor vary during playback when using HDMI audio

    I've been having issues with movie playback using a large 1080p HDMI TV.   During playback the audio level will come in strong, go faint, then go strong again, but not on any sort of pattern I could discern.   It did this on three seperate movies legally purchased via iTunes.  I get audio and video without trouble, its just the audio goes soft when it shouldn't.
    If you remember the VHS days and "MACROVISION" encoding, then you have an idea what it was doing, although it was the audio levels, not the video playback.
    Is this a fault of the system, a DRM gremlin, or something else?

    I think you may be onto something with the graphics card concept. The problem I am having only exists when I am working on an HD project. When I switched back to DV-NTSC then the monitor is fine during playback.
    Yes, I am routing my external monitor through my DV deck, which is not an HD deck - so again, that could be another weak link in the chain.
    This is the first HD project that I am editing, so obviously a few kinks still need to be worked out. My internal hard drive has 1.5 gigs of ram but I am not sure what the specs are on the graphics card.

  • No sound from TV when using HDMI from HP Envy Ultrabook4 despite downloading drivers

    Problem: When using an HDMI cord from my HP Envy Touchsmart Ultrabook 4 (4-1105dx)to connect to my TV to view movies, the video appears on my TV screen, but there is NO sound from the TV. Instead the sound comes from my lap top.
    Troubleshooting: I have looked under Sounds in the Control Panel, but the only choice listed is Speakers & Headphones IDT High Definition (which is the default) and does not allow sound from the TV when using the HDMI. I have also tried to download Driver and Audio Graphics, but wasn't sure which one & the ones which were downloaded have not solved the problem.
    Can you assist me? Which is the correct Audio/Graphic Driver to download? Or is there another possible reason why I cannot hear sound from my TV when using the HDMI to connect to my lap top?

    Hi,
    Please try this first to enable Speakers in Playback devices as follows:
    1. Right click speaker icon (bottom right hand corner)
    2. Select Playback devices
    3. Right click HDMI sound
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

    how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

    You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
    Check your MacBook Pro model year against the list in this Apple tech note:
    About Mini DisplayPort to HDMI adapters
    Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

  • No Sound when Using HDMI from ATT DVR to TV

    I have a 52xv645u TV.  When I connect it to my ATT UVerse DVR using HDMI I get picture but no sound.  Using Composite everything works fine.  I've tried several HDMI cables.  If I use HDMI to my Surround Sound amp, I get both picture and sound (even with the amp volume muted).  The problem seems to be the connection between the DVR and the TV.  Does this TV support HDSC?  I believe that the DVR requires it to support it on the TV.  
    I see that there is an upgrade for the firmware for this TV.  I have a Mac so the instructions don't work right.  I've downloaded the files to a flash drive but I am not sure if they are correct because there is no list of files available.  Does anyone know what files are needed so I can be sure that my flash drive has everything it needs?
    Any help with these problems would be appreciated!  
    Thanks,
    Mark 

    Is there a list of things that are fixed in the update?   I can get sound and picture through component but I fear that it's not the same quality as it would be through HDMI.  But again, it's only when I watch TV without going through my surround sound amp.  I can watch TV through my apm and watch my Bluray DVDs through the amp and it goes via HDMI.  

  • Sound Preferences Changed when using HDMI - Yosemite

    Mid 2010, 27'' iMac
    3.6 GHz Intel Core i5
    14G RAM
    When using the HDMI output (from my iMac, into my Lenovo laptop) my default sound output preferences are being changed since upgrading to Yosemite.
    I have an external sound card for my monitor speakers. the sound card is my default in and output.
    When I insert the HDMI into my laptop (and use the iMac as an external monitor for my laptop) Yosemite changes the default sound output to the iMac internal speakers.  I've used the keyboard to (cmd + F2) and toggled between the laptop external display and iMac home screen and can see the sound output changed to internal speakers)
    Appreciate this is quote a specific issue
    Any ideas if there is a work around for this?
    CT

    Hi,
    Please try this first to enable Speakers in Playback devices as follows:
    1. Right click speaker icon (bottom right hand corner)
    2. Select Playback devices
    3. Right click HDMI sound
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Sound distortion when using hdmi cable

    HP G62 notebook pc(Laptop) windows 7
    I have sound distortion when i connect laptop to pc using HDMI cable, happens after 10 minutes then sound is ok again then 10 minutes later sound distortion again. Sound on laptop is ok. Not HDMI cable because used other laptops and its works fine.

    I'm having this issue as well. Just posting to let people know there is more than one person with this issue. I have a pavilion dv5 laptop

  • HT203167 I am watching a TV show and I get video but no audio. I'm using HDMI output to my TV monitor.  It worked yesterday just fine

    I downloaded a TV show and am unable to get audio from my pc to the TV monitor using HDMI output.  It worked fine yesterday with the same tv show download.  Video/Audio is ok to my pc and video is getting to tv monitor.  Everything is the same but, can't find the audio. This is my first time doing a iTunes download so any help is appreciated by this rookie.

    Hello Quincy B,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/TS1362
    Best of luck,
    Mario

  • Toshiba doesn't recognise laptop or tablet when using HDMI

    I have a toshiba (Model#46G310U) and when try to connect a laptop or tablet using HDMI cable. It says no signal.
    But when i connect the laptop using VGA cable, it works. i want to know my Tv is compatible with tablet or laptop using HDMI cable or if i need to change some setting.

    Jolin:
    Were those scanned tiff image files you added the data to with exiftool? See if PhotoInfo can read the EXIF data in those files. If not then the fields are not the correct ones.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Turn off laptop screen when using hdmi

    I have my Macbook connected to a tv using HDMI.  How do I disable the laptop screen when in this mode?

    turn the brightness to zero    turns off laptop screen doesnt affect the TV 

Maybe you are looking for

  • How to update flash sites without flash installed

    Hi, aside from using ICE, is there a way for someone to update a flash site with pictures and text who doesn't have flsah installed on their computer? i.e., how can you add as well as replace additional text and image files without doing it in flash

  • New computer system, printed colours are wrong, please advise.

    I recently bought a new computer system inc Dell U2711 monitor and purchased LR4 and CS6. All was well, or so I thought, until I got some prints done. The prints from my old system (with which I only used elements 10) look fine. Those from my new sys

  • 802.1x/PEAP over Ethernet

    I am trying to setup 802.1x PEAP in my home lab. I have: a windows 2003 enterprise server with SP2 and latest patches running as Active Directory, DHCP, DNS, WINS. The AD domain name is LAB. The windows 2003 is also running Cisco ACS 4.0.1 with a sel

  • Open SSL iPlanet Web Server 6.0 Configuration

    Hi All, I have implemented Open SSL on Solaris 2.8, Created a virtual server class and added two virtual servers(one with security On ,listening on Port 443 and the other one with security Off,listening on Port 80. When i try to click on the "Attribu

  • User Template can't be opened

    I found a User Template folder in my hd with a red circle with a dash in it.  It's the only folder that has this.  When I click on it, it says it can't be opened because I don't have permission to see its contents.  What's so secret that I can't see