No audio output after rendering video in Premiere Pro CS5.5

I have a pretty simple video with 2 audio tracks -- 1 from the GoPro video, the other is a song. Everything plays fine while editing -- but when I export the video, the audio disappears. Is this a bug or are my settings buggered up? See audio settings below:
And here are the video settings:

OK - I tried AME. I imported the PRPro proejct - managed all the settings, pressed "start" and let it sit. Nothing happened -- it stalled and never rendered a single frame. I know, different issue than before.
Back to the previous problem: I am posting my project window for you to check out. I re-rendered it, and same problem.

Similar Messages

How can I reduce (or remove) camera shakes in a video with Premiere Pro CS5???

I want to reduce (or remove) camera shakes in a video with Premiere Pro CS5. Is there an build-in plugin I can use, or do I have to download / buy one? Thanks.

You didnt need to look very far down the page to see this...
http://forums.adobe.com/thread/619165?tstart=0

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks

function(){return A.apply(null,[this].concat($A(arguments)))}
bmiller0525 wrote:
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks
thats way too vague of a question... best what? quality? size? playback?
best quality then use high bitrate, small size use low bitrate.

"Missing Codec" when importing QuickTime-Video into Premiere Pro CS5.5. What can I do?

Dear Adobe Community,
I tried importing a QuickTime-Video into Premiere Pro CS5.5, which did not work because there was a codec missing. What can I do now?
Thank you in advance for your helpful comments!
lots of love
Flora

Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Poor quality on movie after exporting it from Premiere Pro CS5.5

Hi!
As a part of my bachelor thesis in industrial engineering, I am making an animation that shows how different types of water turbines work.
The animation it self, I've created in a program called Autodesk Inventor. From Inventor I get an uncompressed video. This video is usually not possible to open directly, but when I convert this with FreeMake video converter, it works
Conversion in FreeMake:
From:
RAWVIDEO
1280 * 720
16:9
663,554 Kbps
30 fps
To:
. Avi, mpeg4
1280 * 720
16:9
3283Kbps
30fps
The video looks great now, but now when i have finished editing the film in Adobe Premiere Pro CS5.5 and exported it, the lines are very blurred and bad. I've attached a picture showing what I mean. I have tried many different settings in Premiere, but i cannot get it any better.
The picture on the left is after exporting, the image on the right is after converting it in FreeMake Video Converter.
Have tried with the flicker removal, but with poor results.
Does anyone have any tips on what I can do?

Thank you for the warm welcome
Yes, the video from autodesk is uncompressed avi. These files are impossible to import in Premiere, and i cant open them in either VLC or WMPlayer.
After a conversion with FreeMake VideoConverter they are possible to import, and they look very good in VLC.
My Sequence settings are:
Editing mode: HDV 720p
Timebase: 29.97 frames/second
Video:
Frame size: 1280*720
Pixel Aspect ratio: Square Pixels (1.0)
Fields: No fields (progressive scan)
Display format: 30fps Drop-Frame Timecode
Audio:
Sample Rate 48000Hz
Display format: Audio samples
Video Previews
Preview File format: I-Frame Only MPEG
Codec: MPEG I-frame
With: 1280
Height: 720
Maximum bit depth and Maximum render quality is checked.
I have tried with a variety of export settings, but my current ones are:
Output:
Format: Quicktime
Video Codec: H.264
1280*720, 29,97 fps, Progressive, Quality 100, 48000Hz, Stereo, H.264
Aspect: Square Pixels
Render at maximum depth
Depth: 24bit
Use maximum render quality.
One thing I find quite strange is that i have to short clips at the beginning, which both seem fine.

After Effects AND/OR Premiere Pro CS5 ?

Hi guys,
I am quite new, I have only done one videoproject and that was in Premiere Pro CS4. Now I got a new machine and have both Premiere Pro CS5 and After Effects. I have started learning AE from some videos and it is quite impressing what you can do there. So I hope I can use AE to improve my videos.
My question is, shall I do the project in PPCS5 and then connect to AE for making special effects on clips or shall I do the whole project in After Effects ?
If I choose AE for the project, will I miss some functions from Premiere Pro?
Many thanks in advance !
Sven

Thank you guys!
You put me on track, expecially with the link!
From beginning I am just taking care of old videos that noone look at because not edited so most of the time just crap.
I want to edit them, try to improve color and sharpness but also add some funny elements so they are more interesting to watch.
I have 30 videos from my daughter, each 1 hour and 8 of my own (really crap) and 8 VHS from a friend. That is just to start with.
Start Adobe Premiere Pro from within After Effects and capture footage for use in After Effects. (See Use Adobe Premiere Pro for capture (Production Premium and Master Collection only).)
Use Adobe Dynamic Link to work with After Effects compositions in Adobe Premiere Pro without first rendering them. A dynamically linked composition appears as a clip in Adobe Premiere Pro.
Use Adobe Dynamic Link to work with Adobe Premiere Pro sequences in After Effects without first rendering them. A dynamically linked sequence appears as a footage item in After Effects.
Start After Effects from within Premiere Pro and create a new composition with settings that match the settings of your Premiere Pro project.
Select a set of clips in Adobe Premiere Pro and convert them to a composition in After Effects. "
So with a testvideo I will start using these 5 different methods so I learn when to use which one!
And I also have 4-5 videolessons to watch.
Thanks again!
I probably be back soon with more questions!

Canon DSLR Video in Premiere Pro CS5

Iam now using Premiere Pro CS5. My Windows PC is running Windows 7 64 bit Pro with two 2.66 Ghz quad core processors, 12 GB RAM and a Nvidia Quadro FX 4800 GPU. I am also running dual EIZO 24 inch monitors vis display port connections.
I am editing Canon 5D MkII DSLR video. When I place the video in the time line I get the yellow bar across the top of the timeline. Should I be getting the yellow line. All the promo clips I have seen show it with no yellow bar untill you start adding filters etc.
Also when I play a single time line it does play smoothly but after about 10 to 20 seconds the clip stops palying and I have to restart. Also the clips do not scrub smoothly.
Any tips would be helpful.

I have one set of drives set up as Raid 1 and a second set of drives set up as Raid 0. Have tried the video on both sets of drives and get the same problem. Even tried putting the scratch disks on a seperate drive.
I am runing Windows 7 pro 64 bit, Two 2.66 Ghz quad core processors (not hyper threading) and 12 GB RAM so it is a reasonable sized machine.
I will double check the drivers for the graphics card but I am sure I have the latest as we only downloaded it last Wednesday (3 days ago).
This is all starting to sound like a hardware/setup problem in my PC.
I am sure I have Premiere set up right! The Mercury Engine (GPU mode) is running.
I am also sure that when I first installed it earlier in the week it was playing OK with the Quadro FX 4800 GPU (maybe I just imagined it). When I first installed CS5 I was running a Nvidia GeForce GTX 280 graphics card, which is not supported, and DSLR video played smoothly on CS5 timeline.
Things that have changed since I thought it was playing OK with the FX 4800.
1.     Changed from two Neovo Monitors running via digital output to Two EIZO Monitors running via Display Port output. (tried switching the monitors back - no change)
2.     Uninstalled Matrox RTX 2 drivers
3.     Installed Twixtor Pro Version 5
I don't consider myself a novice with all this - have been doing this for a number of years (12) but this has me buggered!
I am about to install CS5 on my laptop (once it has been upgraded to Windows 64 bit) so will be interested to see how video plays on that even though it won't have the Mercury GPU acceleration.
So for the long diatribe but thought it might be useful.

Importing .mts AVCHD video into Premiere Pro CS5.5, HELP!

Hello,
I am new on Adobe forums and I nedd a question answered.
I have seen that there is no definite answer on how to import .mts files from my Canon Vixia HFR20 to Premiere Pro CS5.5.
I get "The file has an unsupported compression type" message. For now I convert the videos to .AVI but i would why would I continuosly convert them?
I bought the camera mainly for the HD, so help soon would be greatly appreciated!
Thanks in Advance,
Ethan
P.S: I have a PC to put that in mind...

Post a screen cap of what presets you have.
Maybe you have gotten the revert to trial bug and lost your options to play these files since they dont play in the trial version.
Here is what mine look like.
Here is the Properties of the file you uploaded.
And here is what sequence that was created when dragging to the New Item button.
See if you have the same options.
GLenn

Audio problems when exporting files from Premiere Pro CS5

I try to post in English.
I have audio problems in Premiere Pro CS5 when exporting a film.
I cut an interview. The sound seems not to be synchronized when exporting a file. It doesn´t matter what file format I export. On cutting points the sound is different to the sound I hear in premiere. In premiere the audio sounds very good but in exported file I hear cracks on cutting points.
When I reimport the audio file an put it in the timeline the synch point is correct but the interview differs about 2 frames to the original audio in premiere.
The material was filmed on Sony ex3. The files are XDCam HD. I have updated the production suite.
Thanks for answers
Frieder

Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

Missing audio track when importing video into Premiere Pro CS3

When I import my M2TS video into the editor there is no audio when viewed in the source. There is also no audio track when I drag a clip down to the timeline. Any fix for this?

I have the same problem with M2TS files in Adobe Premiere Pro CS4. The audio track is there - Adobe Premiere just doesn't recognize it. If you open the same clip in Nero Showtime, Corel Ulead VideoStudio, etc., the audio will be there. The audio is probably multiplexed.
I have been recording High Definition TV using the Hauppauge HD PVR 1212. About 15-20 % of the M2TS files recorded will be seen as video only clips by Adobe Premiere. The remaining clips will be conformed by Premiere and you will have a Dolby Digital 5.1 audio track. If you convert the video only clips to .MP4 and then re-import them into Premiere you will then have the Dolby Digital 5.1 audio track back and you're good to go.
I use either Xilisoft or Arcsoft media converters to change to .MP4 files. If you use Arcsoft you will have to render the clip. The files converted by Xilisoft don't have to be rendered for playback.

Rendering problem in Premiere Pro CS5.5

Help me, I've been looking in all the Internet and I seem to be the only person in the world with this problem.
I'm doing a project in cs5.5 in 600x340 and I noticed that the playback after rendering (with the green line) is all wrong. The quality of the video gets worse, the image is a bit flattened and a BLACK BAR appears on the bottom half of the playback monitor. When I export, the black bar is not there, but the quality is still bad. This happens in both my computers but it doesn't happen when working with native resolution (1080p, 720p...)
I have tried changing all settings in sequence and rendering and the only thing that kinda fixes it is using custom settings and changing "I-Frame only mpeg" to any other. But if I render with P2, my computer is extremely low.
Here is proof:
good (unrendered, red line)
bad (green line, in this computer there are black bars on the side too for some reason)
I know it's a weird problem, but I need to do this project in those dimensions and I simply want to know why the hell is it happening.
Thanks

Edit your Project using a setting that matches your source footage.
Nest it in a project that suits your dimensions and make a scale change that works ( fits).

Locked a Black Video Layer and Premiere Pro CS5 Hangs Up

Ran into a problem whereby I have on Video Layer 1 a layer of Black Video about 30 minutes long.
I have 2-4 additional video layers above and about 9 audio layers.
When I locked Layer 1 which has nothing more than a premiere pro generated Black Video layer, Premiere Pro CS5 completely froze up, became unresponsiveand not even able to move the CTI, particularly when I tried to zoom in on the layer. However when I locked any of the other video layers, not a problem. Hardly ever lock layers so didn't notice it before.
Filed a bug report but was curious if anyone ran into this problem.
Using p2 media
Timeline preset is DVC PRO HD 60. Using
Windows 7,
Intel 960 3.2GHz,
2 disc Raid 1 system drive,
3 disk Raid 5 for media,
2 disc Raid 0 for media previews
GTX 470
24 GB RAM

Nope, me neither. Caught me by surprise. Tks.

Premiere Pro CS5 not responding after 55 minutes of capture with intensity shuttle

Hi and thank you for the valuable resources on this forum.
I am capturing analogue video into Premiere Pro CS5 using he Blackmagic Intensity Shuttle (with Time Base Corrector in the video path). My captures are stopping at 54 or 55 minutes when the computer becomes non responsive. This has happened with the Blackmagic motion jpeg codec as well as the 10 bit YUV capture. Same thing happens if I capture with media express (the blackmagic capture software)
I have tweaked my system as per many of the recommendations in the forum.
Running CS5 5.03, autosave set to 10 minutes (same problem with no autosave or autosave at 20 minutes)
Windows 7 64 bit fully updated
i7 - 930 cpu
Gigabyte x58A - UDP5 (Revision 1)
24 Gb Ram
Nvidia 470 - MSI with the twin Frozr cooling solution.
Restore off, indexing off, windows search off,
Followed tips from forum and Viper regarding optimizing system
3 Hard drives
System on standard Sata 2 drive
Project capture to OCZ Vertex 3 120 g SSD drive (nice bit of gear) running on Sata 3 controller
Page file on another hard drive
Norton 360 unistalled
Anything else I could find unistalled or turned off.
Firmware and drivers for on board USB latest from Driver Station as per Blackmagic Recommendations.
Very succesful capture of things shorter than 55 minutes but I have some longer things I would like to capture in one go.
I have used process explorer to watch what happens. Nothing special that I can identify in terms of processes but cpu seems to be going to 100%.
With progessive tweaks the problems remains the same.
I am not aware of any file size limits with Premire Pro or Blackmagic - are there some?
Considering reinstall but would greatly appreciate any insights. My first post so I hope I have provided the right info to help you help me.
Thank you
Andrew

Good that you got it fixed... bridging device drivers have cause problems clear back to the computer version of the stone ages
I still have a Pinnacle Dv500 card (used via dual-boot with WinXP and Premiere 6x) that went through several device driver versions to get everything working right
While everything is working right... make a full "picture" of your hard drive to external USB drive to make recovering easy in case something goes wrong
Hardware crashes or virus infections happen, so you should buy software to make a full
backup of your hard drive to an external USB hard drive... plus, making step-by-step
backups during a new install or major program addition makes it easy to go back a step
if something doesn't work
This backup and then restore is, of course, only to the same computer with a new drive
(or the same drive as long as you don't mind writing over everything) since doing a
restore to a new computer won't work due to Windows and many programs having activation
information that is keyed to your hardware (which is why Windows will force you to RE-
Activate if you change very much hardware)
The product I use is at http://www.terabyteunlimited.com/image-for-linux.htm
Image runs off of a bootable CD via Linux (the Zip you download includes a program to
make the bootable CD) and it reads EVERYTHING on the drive, even the hidden
registration information, so everything is restored when needed... and you may restore
the image to a brand new drive in case of a crash, and not have to re-install anything
Please note that I own no part of Image, and I don't get a referral fee (that is just a
plain web link) but I use the program and it has saved me a LOT of trouble when I had a
hard drive die... and I was able to restore everything and not have to re-install or
re-activate a single program, from Windows on up

Problem mit After Effects und Premiere Pro CS5.5

Hallo Liebe Adobe Community, ich bin neu hier. Derzeit habe ich folgendes Problem:
Dieses taucht auf, wenn ich entweder Adobe After Effects oder Adobe Premiere Pro CS5.5 starte. Die beiden Produkte habe ich gestern als Testversion auf Adobe.de heruntergeladen. Ich habe diese auch wirklich nur als Testversion Installiert!. Am anfang ging es auch, sobald ich aber meinen Pc gestern neu gestartet hatte kam dieser Fehler. Als erstes habe ich alle Daten von beiden Programmen enternt, vohher aber Deinstalliert. Danach wieder neu Installiert, Pc wieder runter und hoch das selbe Problem. Danach habe ich es auf meine 2. Festplatte Installiert, genau der gleiche fehler!.
Ich bitte um eure Hilfe, da ich diese beiden Produkte gerne Testen möchte!
Falls es wichtig ist:
Windows 7 Ultimate 64bit
8GB Ram
Nvidia Geforce 570gtx mit 1,25gb
1x 1TB Festplatte
1x 2TB Festplatte
Danke für eure hilfe.
Falls es hier nicht klappt, bitte via Skype: mkowsl89
mfg
LetsPlayNeromo!

Danke, aber das hatt es nicht gebracht. Kommt immer noch. Das witzige ist, nachdem Windows hochgefahren ist, sind die 2 Produkte nicht mehr komplett Installiert.. es fehlen Daten. Bei Photoshop ist das nicht so, nur bei diesen. Das seh ich wenn ich auf: Computer-> Deinstallieren und Entfernen gehe. Alle Symbole und Größen der Programme stimmen, bis auf die oben genannten Programme...

Does Premiere Pro CS5.5 support MPEG-2 Program Stream export format?

The title says it all, so I need to know am I able to export video from Premiere Pro CS5.5 in MPEG-2 Program Stream format?
I'm working on a ad spot for local tv channel and they only accept this format. Any help is appreciated!
Cheers,
Juha Tuomimaki

No, I don't. I'm not an expert what comes to details on all the different video formats, but I'm quite sure that Transport Stream or TS and Program Strean (PS) are two different things.
Currently I see four options in PR Pro when exporting MPEG-2 and choosing the multiplexing method: MPEG2, DVD, TS and None. Basically, I know that the three last choices are not what I'm looking for, but I'm not sure is the first one (MPEG) same as Program Stream. Or maybe I need to install a whole different codec...? Very confusing.

No audio output after rendering video in Premiere Pro CS5.5

Similar Messages

Maybe you are looking for