No audio output from speakers
No audio coming up from iphone 4 speaker ,system reboot couple of time still nothing,software is 4.3.3 why?
Mute switch is in off position,and when connecting to headphones it works fine on headphones,and to activate the speaker just need to connect to a docking station only a few minutes the speaker went off again, is it software issue or hardware?
Similar Messages
-
Simultaneous audio output from Ipad and bluetooth ?
Is it possible to have simultaneous audio output from IPAD and a bluetooth speaker? At present I can only get audio from the Bluetooth Speaker and nothing from the IPAD's audio out! My purpose is that my Mom will hold the IPAD to listen to her Audiobooks but my Dad who sits across the room and is hard of hearing needs a speaker close to him, so I need simultaneous audio from both devices.
JWUse this: http://smile.amazon.com/KOKKIA-A10m-MULTI-STREAM-Transmitter-concurrently/dp/B00 69G1SIC/ref=smi_www_rco2_go_smi_1968491462?_encoding=UTF8&*Version*=1&*entries*= 0&pf_rd_p=1968491462&pf_rd_s=smile-campaign&pf_rd_t=201&pf_rd_i=B0069G1SIC&pf_rd _m=ATVPDKIKX0DER&pf_rd_r=1N57Q0YT9QW7Y1K596YD and use two Bluetooth speakers for them. The speaker output on the iPad is pretty limited and your mother will probably have a hard time hearing it. Get a BT speaker for both and the above device and they both can listen from whatever location they want (within 40 feet) and get better sound.
-
Analogue Stereo Audio Output from the New Mac Pro
Does anyone know what the analogue stereo audio output from the new Mac Pro is? From the specification, there appears to be a stereo output for headphones, but it is unclear what other audio outputs are available and whether a stand-alone amplifier is required to drive small stereo speakers. Yan (UK)
It is line-level. You will need powered speakers or an amplifier.
-
Multi channel audio outputs from a laptop such as 5.1 or 7.1
is it possible to get multi channel audio outputs from a laptop such as 5.1 or 7.1 for watching Movies or television while using Windows media Center.
Ok so i order to help anyone who is interested.
The only ironic solution to this problem i found was to use a plugin called xto7 to convert the xml to the old fcp7 format.
i then imported this into premiere pro.
this was then able to export an OMF that when imported into logic 10 that was using the correct 6ch mono setting as separate tracks.
Insane but it works until Apple fixes the incorrect meta data import in FCPX that sets the xml export to the default import that is always surround.
this is the only way i was able to send stems with all the edit points and fades for the sound editor.
If you don't have premiere lying around you maybe able to do it with fcp7 too we just didn't have it in this studio.
Fingers crossed Apple fixes the fcpx xml export. -
No audio output from the orange mini j
Hi all,
I am having problem with my Audigy 4.
Hope you know what I mean, there are three 3.5mm mini jacks
of three different colors: green, black, and orange.
I have noticed that there are audio outputs from the green and black mini jacks only, while the orange mini jack seems to be not working at all.
When I plugged an earphone line to the orange mini jack,
I could hardly hear any sound from it.
Any idea?Message Edited by kwfine on 07--2007:03 AMThe orange jack is the center/subwoofer audio jack. If you're using a 5. speaker system. Make sure you have selected 5. speaker setting in the speaker setup software.
Jason -
How can I toggle my iTunes audio output from my TV speakers to my Mac speakers
I've just recently set up my Apple TV.
This morning, I tried playing a song on my Mac with the intent of hearing it from my Mac speakers. However, the output came out of my TV speakers. How can I choose where the audio output is coming from?From your Old Computer... Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
An Added Bonus is that you will then have a Backup of iTunes...
Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html -
Help!! No AUDIO output from iMac through FW to mixing board (zed r16)
With my system stated below, I run an Allen-Heath ZED R16 board via FW. PROBLEM: I get NO Audio output to the R16 when I play iTunes or DVD/CDs in the iMac.
I DO get audio feed when I playback projects from Logic.
I have checked all System Prefs on the iMac (cahnged to the ZED); on Logic (changed to the ZED). I tried all different channels, routing, etc. NOTHING.
Can someone help?Well, the Allen-Heath support site had the answer... quite surprised and pleased!!
Have to reconfigure the iMac speakers in the Audio/Midi preferences. The details are found in this URL:
http://allen-heath.helpserve.com/index.php?m=knowledgebase&a=viewarticle&kbarticleid=238
The ZED R16 is a great board but certainly not Plug' n Play. -
Audio Output from Mac Mini 2010
Hello -
I purchased a mac mini 2010 this weekend for use as a home theater PC. I've got it connected to an Onkyo tx-sr604 a/v receiver via HDMI. I then pass the HDMI signal from the Onkyo to my hdtv, so I think it just passes through. For audio, I use a surround sound system. And, in case it matters, I have a second tv connected via the DVI output on the mini.
The Onkyo indicates that the audio input signal on the HDMI is PCM Multichannel. When I play movies (e.g., Netfix or DVD) or music (e.g., pandora) on the mini, I don't get any sound on the center channel in multi-channel mode. In direct mode, I only get sound in the front left and right speakers. I'd like to have normal surround sound.
Is there not a way to get 5.1 surround sound from the mini? Or, am I missing a set up or something? If I connect my receiver to the mini with the digital audio output, will I then receive digital audio?
Thanks.Welcome to the Apple Discussions!
Mike it is my understanding that if you want 5.1 Surround sound that you must connect the mini directly to the SS system and not pass the audio signal through another device.
Dah•veed -
Simultanious audio output from both mini Displayport and Audio Output port?
Hey guys,
I was wondering if someone who already has audio+video output through the mini displayport set up can be so kind and answer the following questions for me:
Can audio be output simultaniously from 3.5mm audio port as well as the mini displayport? That is, if I output both video and audio to my reciever through the 2010 iMac's mini Diplayport, can i use the standard audio output port to provide line input for a further set of (active) speakers (analog would be fine)?
In the case both outputs CANNOT work simultaniously, which one will work if i have both plugged in? If the mini displayport has higher rank (or priority or what whatever i should call the one that works when both outputs are plugged in), and the reciever it is plugged into is switched off, will audio automatically switch to the standard audio port? Same question goes if the standard audio output port has higher rank/priority?
Many thanks in advance!
Just in case you are wondering why the heck i would wanna do that, here's some background:
I am planning on setting up my new 27' iMac on a 'work' desk in my bedroom, where i can comfortably sit and work on the computer as well as use the beautiful screen as my bedroom TV. Since i also wanna use my mac for all my living room multimedia needs (movies, tv shows, music, etc), i plan on running a long (15m) audio+video HDMI cable all the way up to my reciever in my living room. Furthermore, i am also planning on running a USB cable to the living room (through something of this sort: http://www.coolgear.com/images/171632pro.jpg) plugged in to a usb hub mainly for mouse/keyboard availability in the living room, but also for other things such as external hard drives and so on. The problem is that, apart from having my audio play in the living room, i also want to provide line input to my reference monitors that will be located at the iMac desk and i obviously much prefer i get the line input directly from the mac rather than running a third cable from reciever back to the speakers.
Message was edited by: LeeonAnyone?
Is that so few people are using the new mini displayport for audio, or did i ask the wrong way?
Help will be greatly appriciated as i need this info in order to plan my purchases! -
No audio output from built in audio
I do a lot of music production/recording on my mac, and to do so I use a firewire audio interface as my audio input and output while recording. When the device is not plugged in my mac usually automatically switches to the built in speakers or headphone jack for audio output. Tonight when I was done recording, I unplugged the interface, opened up iTunes, and went to turn the volume up, but what I got was the little pop op graphic of the speaker, with a little crosse out circle (like a no smoking sign). Now under my system preferences, built in audio is no longer listed as an option for output. After rebooting the machine the problem persists. Any thoughts?
You might try resetting the PRAM:
http://support.apple.com/kb/HT1379?viewlocale=en_US
If this does not work then I would run "Repair Permissions" from Disk Utilities. -
No audio output from either board
I have two machines running MSI boards. The one I am on now is a 7640 ver. 3.1 with Win8, the other is 7597 ver 1.1 with Win7. Both worked properly for a long time. This one stopped outputting audio last week. There are no yellow flags in device manager on anything, the control panel shows the Realtek audio is working fine, but no sound comes out. It was obviously the speakers, right? Wrong. I took the speakers from my daughter's computer that were working fine, put them on mine and nothing. I put the speakers back on her machine and they are still fine. A week later, her Windows crashed. I reinstalled Win7 and now there is no audio output on that machine! Everything says it's fine from device manager to control panel, but there is only silence.
What can I be missing? Help would be appreciated.Well, as you have problems with two machines add both machine's details following >>Posting Guide<< as already said.
Reinstall in any case realtek audio: http://www.msi.com/service/download/driver-2584.html
Quote
My video card is an MSI GeForce 9800.
Which?
http://www.msi.com/service/search/?kw=n9800&type=product -
Can MainStage split the audio outputs from a plug-in to separate busses/out
Take EXS24 or Battery 3 or Kontakt as examples
Only one plug-in instantiated but each drum 'hit' sent to separate outputs from within the plug-in/VI and brought into the mix on Audio/Aux channels for separate processing.
It's easy to set up in ProTools and Logic.
(I don't want to send the output of the channel strip to a bus - I know how to do that)
I've read the manual so many times and can't find any answers.
Does MainStage actually allow this routing ?
Thanks for any help
LeeAs far as I know, the only way to do what you want in MainStage is to set up an EXS24 for each output.
The EXS24 does have an option to load with multiple outputs, but I haven't found a way to make it work on my set up. -
i get the air play icon on my ipod touch. when i click it the output from my ipod stops but i dont get any audio from my tv. whats the problem?
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Just purchased a Z1 over the weekend and was happily fumbling with the new phone. Got it updated to the latest 4.4.2 as well.
Noticed a glaring problem with the volume output from the speakers.
During use of instant messaging apps like Whatsapp and LINE, notification tones come in at times at the level that i set it at (max) and sometimes they come in really soft, to the extent i can't even hear them and sometimes none at all. All these happening when i've set the volumes to MAX on each of the available options under settings>sound>volume. Might i also add that the volume for notifications is really too soft even at MAX.
I'm not sure if this is happening due to the updating of the software or it was already an issue prior to the update. I've seen a couple of posts online where some users are experiencing the same erratic behavior of the internal speakers.
I hope someone can shed some light on this so we don't judge too quickly on an otherwise excellent phone.I have the problem with my xperia Z1 speaker and ear phone not detect after update 4.4.2 in kitkat version.
phone purchasing date : 28.02.2014
Before update my Z1 runing in 4.3 jelly bean and phone is working properly....i have only one issue in 4.3 during call accept automatically call going in speaker.
1 Problem after update 4.4.2 kitkat version sometimes movies app playing video song but voice is not out from phone speaker and song voice playing in ear speaker then i press play/pause button in movies app then song voice play in phone speaker
2 Problem i connect my ear phone in my Z1 and phone is not detect ear phone i play the song in walkman app so song voice is out from phone speaker and not lising voice in ear phone then i restart my phone ear phone is working properly.
2 times done my Z1 software repair but not fix the problem........please tell me what can i do for fix my Z1 problem
Thanks & Regards
Shekhar Jaiswal -
Selecting audio output from iPhone - bluetooth or dock?
Hi
I have a problem selecting audio output on my iPhone 3GS with my incar system
Set up:
Dension ipod dock connected direct to CD changer port on Radio
Bury Bluetooth hands free device.(CC9060)
My preferred option is to have the Dension play my audio.
However when I turn on the iPod function on the iPhone, the audio defaults to the Bury hands free system and tried to stream the audio via bluetooth which the phone cannot do.
On the bottom right of the screen on the iPhone, I see a speaker icon - I click on this and I get the option to select the iPod Dock or the CC 9060 (Which is the Bury Hands free)
I can select the iPod dock and teh audio plays fine, however, how to I force the iPhone to always use the iPod dock and not the Bury hands free.
From what I can tell, its not the Bury which is forcing teh choice - its the iPhone, but I cannot see anywhere where there is an option to choice the iPod dock as the default audio device.
Any one have any ideas?
Thanks
GlennFound a quite probable fix.
I've took my dock station under big lens and noticed a stuck contact -- they are supposed to be somewhat movable. So I pick a real small screwdriver and unstuck the contact.
Issue is apparently gone.
Message was edited by: Alex HQuest
Maybe you are looking for
-
Example of Interactive ALV Report
Hi all, Can anyone give me simplest example of Interactive ALV Report. Please give some description with that so that i can understand it .. Thanks Raj
-
115,000 Addressbook contacts. How do I delete Addressbook data file?
Because of (I think) a synchronization problem, I now have over 115,000 contacts in addressbook. the unwanted entries are blank, and appear as 'no name.' Because the file is so cumbersome now, I haven't been able to delete the 'no names.' I recently
-
I have pop3.live.com and a gmail on two accounts in the mail settings on my Touch. Whenever I do something in these accounts on the Touch the same thing happends on my desktop with these mail accounts. I prefer it that way but I just want to know doe
-
My Creative Cloud App Seems to not be working properly.
I don't think its syncing with my Premiere Pro CC 2014. The desktop app is blank as well.
-
Gurus, When we try to detach analytic workspace, I get the following error ## Detail 0 ## java.sql.SQLException: ORA-33273: Analytic workspace FPA.FPAPJP has open cursors and cannot be detached. ORA-06512: at "APPS.FPA_UTILITIES_PVT", line 129 ORA-06