No audio sound from my timeline

Hello everybody,
I have no audio sound from my timeline.
What did i do!
i started a new event and project.
From the media browser i dragged and dropped pictures from my library into the timeline.
i also dragged and dropped a song my itunes lib into my time-line.
Now i play my time-line. The pictures goes well but i hear nothing.
Who can help me out here.
Eric

Hi Tom,
See the picture.
I hear the audio (right side) when i scroll over the green audio line. Also i have reaction on my audio-meters.
But when i play the timeline with the same audio i hear nothing.
I think it a setting problem? or did I switch of the timeline audio somewhere?

Similar Messages

Feature Request: Modify Audio Channels from the Timeline in Premiere CC.1

Why have we never been able to modify audio channels once a clip is added to a sequence? I'm guessing there's a good reason Adobe has never had this feature. The lack of this feature is explicitly mentioned a few times in the audio section of the Premiere Pro CC manual, as if it's a benefit NOT to have it. But the benefit is entirely lost on me.
In my workflow, I synchronize my double-system video and audio before anything else. I do this in PluralEyes (and unfortunately I'll have to keep doing it this way, until PPr's sync on sound feature gets fixed—for me it's never worked).
Once PluralEyes has synched hours of footage and audio and placed it on a PLURALEYES GENERATED sequence, I import that sequence into Premiere. Note: Since I haven't gone through the step of creating a blank New Sequence, I don't get the opportunity to setup my audio channels the way I'd like in my sequence (i.e. Stereo recordings should occupy ONE track, not two. Typically these tracks come from a camcorder and are used for reference sound, or ambient noise at best, so I don't need them taking up precious real estate in my sequence).
Since PluralEyes doesn't merge my clips for me (or rather I don't want it to since I'm usually doing multi-cam sequences where I want to keep all 14, or so, tracks of audio), I have to go through the clips one by one and do a Merge Clip action once I've adjusted any minor sync issues, or determined which tracks I actually want to keep. But, and here's the key, at this stage I'm not yet 100% certain whether I'll use the nat sound or the wireless mic sound (separate audio recorder, etc). Furthermore, I don't really want to think about that at this point. After I've spent a few mind-numbing hours just ingesting files, sync and merges, I want to jump into the edit as soon as possible, before I lose all will to finish this edit. If I modify my audio channels right now, I'll lose the ability to make some creative decisions later on.
I'd like to start whacking out an assembly edit. And then after I have a rough program, I can start looking at which audio tracks (nat or double-system) I like better in each circumstance. This is where I become stumped that at this stage, I'm locked into whatever audio channels I've setup (or not) in the earliest stage of the edit, back before any media was actually on the timeline! It's at this stage, and usually only at this stage that I want to start Modifying Channels—FROM THE TIMELINE!
Does anyone else feel the same? If not, what is your workflow?
Feature Summary: Right-click on any clip, (master clip, sub-clip, merged, nested or otherwise) in the timeline and choose Modify > Audio Channels.
I've submitted a feature request, with a link back to this discussion, so please pipe in—especially if you want this feature.

Maybe its your specific workflow, asset mangement and use of a 3rd party application that runs you into an issue.
Take Pluraleyes out of the equation, I would imagine my workflow is the same as most everyone else. Find footage in the Media Browser. Import it. Create a Sequence and start editing. Use the Source Monitor to set Ins and Outs and then Insert the clip on the timeline.
At this point, if the audio needs to be modified, it cannot be done on the Timeline. The workaround, of course, is to Find Clip in Project; Modify Audio in the Project panel; then do a Matchframe to replace the audio clip. This works, but requires many steps per clip. Also, Matchframe in Premiere Pro CC is not reliable.
Introducing a new Modify Audio (from Timeline) feature as seen in the fantasy screenshot above would solve it.
I dont use Pluraleyse ...which I understand to be a synching aid...so I dont know the workflow it imposes on one .
Returning to Pluraleyes workflow, this issue is compounded by the need to Modify almost ALL audio. Every stereo track is separated and placed on two MONO tracks taking up precious real estate. This is not something Pluraleyes imposes. It is due to the way Premiere imports XML timelines. This would apply to sequences imported from Final Cut as well.
In this case it would be ideal to select both the LEFT and RIGHT mono tracks and choose "Modify > Audio Channels > Merge L/R Mono to a Single Stereo track." Ideal? No. I guess Ideal would be if Premiere would interpret XML files properly in the first place.
What actually is the issue with Premieres synch and merge workflow in your case?
Audio Sync in Premiere Pro doesn't work. Period.

Anyone having problems with art/animation/audio disappearing from the timeline after a save?

Hello,
I'm having problems with many files losing their assets from the timeline after a save and reopening the file in Mac OS X Snow Leopard. This is happens quite often now and there seems to be no pattern to it. For example, I will open an existing Flash animation complete with sound and artwork, make changes to the animation timing, test the SWF and everything looks good, then save. After reopening the exact same file, there will be audio that was on the timeline will be an empty frame. In addition, there is art work that was swapped out or updated to a character and the symbols becomes empty after reopening. I'm losing days and hours of work and I can't seem to find any answers or help to figure out what's going on.
Any insight would be appreciated!
thanks!

I now use CS5.5 but I've noticed it on every version since CS4.
I JUST ran the latest update to 11.5.1.349
I'll let you know if it continues but for now I'm planning to learn a new software. Finally have some time to focus on this and if it works out I may say so long to Flash. I'll give CS6 a try but if it's not SIGNIFICANTLY improved (Brush tool comparable to ToonBoom, No losing data, Better Playback, Ability to export HTML5), it's just not worth it anymore. I've been using Flash since version 1 and since Adobe took it over, I hate to say that anything other than actionscript has gone WAY downhill. Many new features but they don't actually work well, or crash at runtime if used beyond a tutorial's level intensity. What's the point of all that functionality if it looks like garbage and can't perform on a professional level? Even if you do take the extra time to work slowly or limited to make it look nice - it loses the data! or now without HTML5 your venues of use are sliced in half? Pointless. I don't want to trash all my Flash experience, but I'm done defending an inferior product and waiting for it to catch up to a modern professional standard. I think my Flash days may be over very soon unfortunately. I feel like the're more interested in defending what they've created, than in making it work or even asking us what we want. I feel like a Girlfriend who's Man keeps promising to get steady work but hasn't after 10 years. Flash...we need to talk.

A1000L IdeaPad No Audio Sound from Speakers

Our IdeaPad A1000L was working great for a while, but now it will not produce sound from the speakers. At first I assumed I somehow had it set to silent even though the volume bar was all the way up. I reset all my audio settings. Then I realized the audio works fine from headphones. I did a full reset on the tablet, and still no sound from speakers -- only from headphones. I have read a similar thread where it was suggested that this might be caused by damage to the headphone port, but I rarely use headphones, and don't think I'd ever used them before with this device. Still, I tried jiggling the headphone thing around in there like suggested and it's still not working. When I look in there with a flashlight, it looks exactly like the inside of the headphone port on our other IdeaPad. Is there anything else I can check/try before taking it in for service?

Hello rkrohatgi,
Thank you for the details of the issue you are experiencing and the troubleshooting steps you have already taken. It sounds like you are seeing a screen similar to this when trying to adjust the volume:
I recommend the following steps for an issue like this (you can skip any of the steps you have already taken):
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, followthese troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
You can find the full article here:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thank you for using Apple Support Communities.
Best,
Sheila M.

Weak Beats Audio sound from Pavilion X2 Laptop

I purchased a 11" Pavilion x2 Laptop/Tablet for Christmas and believe I am having trouble with the Beats Audio. The sound coming from the computer speakers is so weak as to be useless and all of the settings will not get the sound loud enough to hear unless you put your ear within 4-6 inches of the screen. However the sound from the earphones is great, loud and adjustable. I have performed all updates from Microsoft and HP and followed all troubleshooting steps suggested by HP Web Site. Any ideas or do I just need to return it.

Hello dontom,
For not being able to hear very well from the 11" Pavilion x2, I would like to confirm the troubleshooting steps that you have completed. I have you completed all the steps in this document 'No Sound from Speakers (Windows 8)'? Are you using any special software, or just the volume icon in the system tray? Does it play the same level of audio for all programs and files? (ie. Netflix, YouTube, or music).
Please also let me know the full model number of your X2. I have included the document 'Guide to finding your product number'.
Thank you.
I worked on behalf of HP

How do I stop the hp dv6 beats audio sound from pulsing and restore dynamic?

I just got a HP DV6-7030TX laptop, with beats audio and I find the sound is constantly changing in volume through the internal speakers
It seems to be, that the beats audio is trying to make quieter parts of the song louder, but when the loud parts come in there is a sudden drop is volume.
I am able to reproduce this time and time again with songs that stop-start and its also seems to get reset when I change one of the presets in the beats config tool (Listening experience tab, chaning between Music, 3D content and Movie), although it almost always reverts back to the limited volume.
I've tried updating the driver to the latest version on the HP website and also disabled the 'Beats Audio' checkbox in the config tool, but neither of these items help.
Other forums have suggested to disable settings on the Sound 'enhancements' tab in the control panel, but I don't seem to have this option on my laptop.
Otherwise I love this laptop, so it would be a shame to have to return the laptop because of this problem.
Thanks,

Download and install the driver from the linke below. it has a fix
ftp://ftp.hp.com/pub/softpaq/sp57501-58000/sp57966.exe
ftp://ftp.hp.com/pub/softpaq/sp57501-58000/sp57966.html

No audio playback from timeline in fcp x.

i have an issue with audio playback from the timeline. i can see it on the VU meter, but i can't hear it. i can hear it in the clip in the event library, but when i drop it to the timeline i hear nothing. i have changed settings in audio setup but nothing seems to work. i use a blackmagic intensity pro card to route audio to external speakers.
everything works as it should with all other software including fcp 6, itunes etc.
i also tried some headphones (after setting audio output to headphones) but still could not hear anything.
what am i doing wrong?

just tried one more time to re-route audio through line out and it worked!! so changed back to blackmagic card and VIOLA!! there it is.
this forum is amazing, all you need to do is post a question, you don't even have to wait for an answer.
cheers and thanks from OZ.

Constant "Error" Audio Sound when I open Quicktime

Hi,
Every single time I open a .AVI File in Quicktime I get a constant and repeated "Error" audio sound from Windows. There are no pop-up error messages or any other indication of what Quicktime is doing that Windows does not like....except for this constant and repeated "Error" audio sound from my PC.
It is obvious Quicktime is doing something Windows does not like.,...but I have no idea what. Can anyone help clue me iin on what the problem might be?
Any help would be greatly appreciated. This is driving me crasy...!!
Thank you.
Rich

Have you tried completely uninstalling and re-installing the current version of QuickTime?
You could also see if there's any related error messages in the Event Viewer which might help to pinpoint what the problem is.
Start > Programs > Administrative Tools > Event Viewer

Encore Timeline Audio Sound Vanishes from Dynamic Link to PPro CS4

Windows XP Pro SP 3
CS4 Production Suite Premium
Premiere Pro V4.2.1
Encore V4.0.1.048
Problem: Encore Timeline Audio Sound Vanishes from Dynamic Link to PPro CS4
I have several several PPro CS 4 projects each with a couple sequences.
In Encore CS4, I make dynamic links to the sequences using
Adobe Dynamic Link | Import Premiere Pro Sequence ...
In Encore, I create the Timelines for the Sequences from the dynamic links.
In the Encore Timeline for each sequence, each Timeline initially plays the video and audio correctly.
However, should I make any minor edits in Premiere (via edit original in Encore) like changing a title's text and re-rendering the PPro sequence, the Encore Timeline plays the video fine, but there is no audio (the audio track is there, but no audio sound occurs). The Encore dynamic link is untranscoded.
The following do not make the Encore Timeline audio track audible.
Update markers from source.
Clean database button for PPro and Encore.
Deleting the media Cache and Media Cache Files folders.
Deleting the Encore Cache folder.
The only way which seems to fix the audio is to delete the Encore Timeline and generate a new Timeline from the dynamic link. Of course, this means relinking the end actions for the buttons and timelines which is a pain and defeats the purpose of using dynamic links.
I have been using dynamic links without audio problems for quite awhile without a problem. Now this problem appears in many projects. Thanks in advance.

Haven't seen a post from the OP since this one.
I cannot directly answer, but here's some info.
From a variety of users comments, and my limited experience with CS4 and significant experience wiht CS5, there were improvements in CS5.
The number one issue when users find no audio in DL situations is not waiting for conforming. Look at the progress bar and wait till done.
You are more likely to see DL audio problems using files in Premeire that are not as easy for Encore (e.g. mp3).

Delete sound in video, keep sound from audio

I have a project with over 400 clips and wish to delete or minimize the audio from the video. I have created a soundtrack of songs that are in the audio. I am hoping to avoid lowering the audio in the video clips. I have highlited all of the clips and then lowered the volume level below the movie pane. When I play this burned copy there is no sound whatsoever, even though the sound in the audio clips has not been manipulated. The checkmark box for video and audio are on.

Forgive me if I have not understood you correctly.
Do you want the audio that is embedded in the video footage to play during the movie? Or, do you just want the audio you added to the movie play?
If you don't want to hear the audio in the video, uncheck the box at the end of the timeline.
Be certain not to highlight the audio portion of the timeline when you are lowering the volume.
Sue

No Sound From Timeline

I upgraded to the 2014 version and now my sound does not play back from the timeline. I can see a waveform, but nothing plays back and there is no level showing in the meter.
[Please choose only a short description for the thread title.]
Message was edited by: Jim Simon

Check your audio outputs are mapped correctly. Edit > Preferences > Audio Hardware.

No output sound from output port/analog audio: Need help

hello, I want to connect my analog audio equipment to my iMac. I have done this in the past with my old G3. I have connected the RCA cables to a 3.5 mm jack and put it into the audio input port, which was what worked on the G3. When I open the sound page for input & output, on Output I can see the volume bar thing moving in relation to the sounds from mic, turntable, etc: all the analog audio things. However, there is no actual output of sound through the iMac;s speakers or a headphone. The output page is pretty simple so I am real sure I have all the rigt things checked, unchecked etc. Any ideas? Thanks.

I had what sounds like a similar problem to jazzzrat. i had my macbook setup to a stereo and it worked for over a year. suddenly no sound came out of the stereo. in my case, it definitely was a software setup thing.
plug in your stereo jack into the audio out port. then go to system preferences-->sound-->output. on there you should see, under "device for sound output": Name=Headphones, port=built-in output. (if you see name=built in speakers, you plugged in the wrong plug). Now go down to the bottom of the window and UNcheck the "mute" box, and make sure the volume slider is midway or more.
For some reason, mac allows you to mute the "headphones" and "built in speakers" selectively. we have no idea how that box got checked, that remains a complete mystery. but when we eventually found -- and unchecked -- the box, our stereo output came back just fine.
i hope this works for you. good luck and have a good new year.

Trying to connect a Belkin brand audio cable from my MacBook Pro to a Sony flatscreen TV. Cannot get any sound from the laptop out of the TV. What am I doing wrong?

I'm trying to connect a Belkin brand stereo audio cable from my MacBook Pro to a Sony flatscreen TV (Apple "genius" handed me the cable to purchase.) I have tried all the ports in the back of the Sony, and tried the volume on both the cable and TV remotes. I cannot get sound out of the Sony from my MacBook Pro laptop. What am I doing wrong???

Downloaded your operating manual. It appears that you need to connect the HDMI to HDMI 1 and the audio to the input socket just to the right of the VGA socket (i.e., between the VGA and the RF input connection). The picture on page13 seems to be the clearest I could find:
Although it's not exactly clear I think they are talking about a standard 3.5 mm (1/8") stereo jack for the audio inpu as opposed to the more common RCA jacks used in the row just above that VGA input socket.
I haven't checked the manual as yet whether you need to set anything special with the controls other than input select.
Note, if that truly is a 3.5 mm stereo jack cables are very common. In your case it would just be a cable with a 3.5 mm jack on each end.
Update:
You will have to experiment with this but I think you will need to try pusing the input button to select either HDMI1 or PC (or Component?). The manual is not clear on this (page 31). Sometimes it just comes down to pushing buttons.

Why doesn't the Belkin Thunderbolt Express Dock relay sound from it's audio out port?

Posted to Belkin Support community to no avail
=====================
Why can't my Belkin Thunderbolt Express Dock operate my desktop speakers?
Options
07-14-2014 01:48 PM
Bought a Belkin Thunderbolt Express Dock at the Apple Store to use with my new MacBook Pro.
When I connected it to my
-20" Mac Cinema display,
-Various USB connected hubs and devices,
-Various Firewire hubs and devices
-My ethernet network from my Cable Modem
Then made the last connection from the Dock to the Thunderbolt port on the MacBook Pro...
All was fine.
But when I made that one last connection - to my desktop speakers via the audio-out port on the dock (earphones icon) nothing happened. The dock did not pick up the audio from the laptop playng an iTunes song or send it to the desktop speakers. When I unplugged the audio cable from the Dock and plugged it in to the MacBook Pro directly, the desktop speakers kicked right in again.
Does Thunderbolt pick up audio-out from a MacBook Pro and carry it to the Dock for connection to my desktop speakers?
Of for some reason, can that signal not be carried by Thunderbolt?
Will I have to get used to the onerous task of unplugging 2 cables from my MacBook Pro when I want to more it to another location in stead of just 1 cable?
But stay with me. Here's the thing.
When this happened I called Belkin Customer Support to ask if they could help me. After taking me through their steps, they agreed that the unit must be defective and agreed to ship me a replacement Thunderbolt Express Dock.
The replacement arrived over the weekend and when I shut down my system and then plugged everything from Dock I purchased into the replacement Thunderbird Express Dock - - - - - the same thing happened!
No signal to the speakers from the dock. Perfect signal when the plug moved from the Dock to the computer itself.
Hence my question:
Does Thunderbolt pick up audio-out from a MacBook Pro and carry it to the Dock for connection to my desktop speakers?
Can it accomplish that function?
Am I really that unlucky to have received 2 defective new Belkin Thunderbolt Express Docks in a row?
Or is it simply a matter of the Dock not handling audio throughput in the manner I am expecting.
Then again, if this is the case, why did the Belkin techies not know this when I called them in the first place.
Yes, I'm going on and on here. But I really don't have time for this.
What's going on here?

OK. No reason to be playing games here. Just surprised that this issue hasn't been brought up here on the community boards as well. Here's the simple solution
Steve
========================================
Re: Why can't my Belkin Thunderbolt Express Dock operate my desktop speakers?
Options
07-17-2014 07:09 PM
After reaching a Level III technician in Belkin customer support today and having spent approximately 4-5 person hours on this issue, we figured out that the Sound/Output preferences in the Apple System Preferences should not be set to "Internal Speakers" but rather set to "USB PnP Sound Device".
Worked like a charm. Simple, elegant solution to a real problem, one likely to be encountered by 90% of the people who buy a Belkin Thunderbid Express Dock off the shelves of any Apple Store to use with a current generation Apple laptop or desktop computer.
But the Level III Belkin technician admmtted that this critical little piece of simple, straightforward information should have been readily available to their Level 1 techies who began helping me 5 person hours ago. Would even have saved Balkin loads of customer service support time.
And so the saga ends
Belkin owes me for helping them learn this precious lesson.
Steve

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

No audio sound from my timeline

Similar Messages

Maybe you are looking for