No audio using WinDV

I have a new camera, a Canon HV40, and I have discovered that sometimes when using WinDV to capture, there is no audio. No changes in settings from when it works to when it doesn't but it doesn't work more often than it does. However it always works when I used my older Panasonic camera. I also tried doing the captuire using PrEl and it works fine so I know the cable and port are OK (didn't even disconnect when switching between programs). The only difference is the camera. WinDV is set to capture Type 2 AVI.
Anyone run into this before? This is using Windows 7 (64 bit) and the camera is new so I don't have anything older than Windows 7 to test with. I can certainly go back to capturing in PrEl, however I've come to trust WinDV whereas at least on my old PC PrEl dropped frames fairly regularly.
Thanks!
Bob

I do not know WinDV, though it gets a lot of good recommendations. I use either SceneAlyzer Live, or PrPro for my Captures.
Now, what is the Audio setting on your new camera? Does it do DD 5.1 SS, or perhaps 12-bit WAV @ 32KHz?
Could be something in the camera's settings getting in the way.
Good luck,
Hunt

Similar Messages

Importing .avi DV movies captured on PC using winDV failed!

I just thought i'd have a go at creating a video out of the footage that i shot at christmas this year. My PC has the most hdd space and so i imported it over firewire using winDV. This has made a set of .avi files with the dv codec inside.
Importing these movies into imovie and telling it to move the files took a while, mostly making thumbnails. Frustratingly after finishing all i'm left with is identical 13second clip previews to scrub over, its a clip from somewhere near the end of the sets of files that i imported in one go. Basically although the actual clips are quite long i can only play through them up to the 13 second limit the borked thumbnails have created.
Looking in my imovie created folders i spot the following
~/Movies/iMovie/Events.localized/Xmas 2007/iMovie Cache/Cache.mov
is a small file that is the full clip set all 50minutes of it.
~/Movies/iMovie/Events.localized/Xmas 2007/iMovie Thumbnails/xmas07
is a quicktime movie that is the offending clip section that makes up all my thumbnail images and is 13 seconds long
~/Movies/iMovie/Events.localized/Xmas 2007/iMovie Thumbnails/iMovie Cache/Cache.mov
is the same short quicktime movie, small file so i assume its a reference to the xmas07 file i described above.
Is this the problem somehow its using this cache instead of the correct cache under the iMovie Cache folder directly under the Xmas 2007 event folder.
I want to know what i can do to fix this, and why this happened in the first place. I do have perian installed to get better playback of files that i usually work with.
Is this a known bug, could anyone else see if they could recreate it?
Cheers
Message was edited by: jimbobuk

yes, i know .avi support on mac varies, especially without perian, but then thats more down to the codecs inside rather than the .avi files themselves. My stills camera files imported easily into imovie and worked fine, these are also .avi files i think.
Converting to quicktime is nice and quick, and i could try doing this, a lot of files to do though, wish i could do them all in a batch.. sadly automator doesn't seem to have a save-as action for quicktime, as far as i can tell. i'd really like to try and remux the files into .dv containers as the mac would expect but i'm not having any look finding a program to do this on windows or mac.

HT200197 NO audio using Apple TV for streaming materials, and YES audio for Mac stored ones; what gives?

NO audio using Apple TV for streaming materials, and YES audio for Mac stored ones; what gives?

Hello Cravate,
The following article provdies some useful troubleshooting that can help resolve audio issues with your Apple TV.
Apple TV (2nd and 3rd generation): Troubleshooting audio issues
http://support.apple.com/kb/TS5150
Cheers,
Allen

Can we capture the video and audio using cam and microphone in Edge Animate?

Hi Everyone,
I got a new requirement from the client to create a HTML5 based functionality through which one can capture the video and audio using his web-cam/camcorder and microphone. I have researched on internet and found that there is api available (not reliable) http://www.html5rocks.com/en/tutorials/getusermedia/intro/ . I am not a coder by profession and use Edge animate to create HTML 5 based animations and stuff like that. Another problem which i have found that the api only works well with Chrome and Opera and not with Mozilla, IE..
Can anybody help me out in this, please...
Thanks & Warm Regards
Vikas

Hi, Vikas-
After a brief bit of research, you're definitely hitting upon the limitation of the browsers. Not all of the browsers have implemented this part of the HTML5 standard, so you're going to either have to use Flash or be limited to these specific browsers.
Thanks,
-Elaine

My video has no sound but i want to add the audio using premier pro

My video has no sound but i want to add the audio using premier pro.
when I want to import the file,it said:your video file has no audio.
But i want to add the sound to my video!!
Does anyone know how to solve this problem??

So you have a video (.mov) that some how you got from Flash.
It has no sound on it.
Does the .mov import into Premiere?
If it does..you edit it in the timeline (sequence) and add audio to the audio track(s) before exporting it.

I've imported a giant cd collection for my work in wav format for the best quality audio using iTunes version 11.1.1. I need to transfer this library to our Music workstation using iTunes 11.0.1. That workstation version of iTunes can't be upgraded for

I've imported a giant cd collection for my boss in wav format for the best quality audio using iTunes version 11.1.1. I need to transfer this library to our Music workstation using iTunes 11.0.1. That workstation version of iTunes can't be upgraded for compatability reasons with other software using iTunes. When I try to transfer the library I lose all of the CD metadata and end up with only track names. Is there a way to transfer everything along with the metadata?

Not easily. WAV format does not store tag information in the file. Realize both AIFF (equivalent to WAV) and Apple Lossless (full quality but smaller files) do, so WAV was unfortunately the worst format to chose.
If you have to go with what you have you will have to explore exporting the library as .xml, moving it and the files to the other computer, then rebuilding a lower version library with the two sets. I am not sure if you can do it with the library.xml file that already exists or if it too differs according to version. You may end up having to export the files as a playlist. You will, of course, lose artwork too, though you can try fetching it from the iTunes Store later.
Some of what you need to do is outlined in these articles though you have the added limitation that you are not building a library of the same version. (It really is a piity you choose WAV, otherwise you could have simply added the ripped files and most of the data would have traveled with them.)
https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451

I just recorded audio using QuickTime, but now I can't use it in iMovie.

I used QuickTime 10.0 to record audio, but now I have no way of using this audio in iMovie. I added it to my iTunes library, but I can't drag it into my project to use as a regular audio file. I can't even convert it to some audio format since QuickTime 10 doesn't have that feature.
Help! I was hoping to create a screen recording demo via QuickTime and overlay it with audio using speech I recorded using QuickTime as well, but now I see I can't. Is there any way to use audio recorded with QuickTime other than just listening to it?!? Seems like a feature that isn't done yet.

The thing is that there is no unlocked phone in the US that is available for purchase. The T-Mobile phone is contract/sim free and not unlocked and for the unlocked phone you have to wait for at least a couple of months after release before the unlocked phone is available.
That is why you cannot use the phone in the UK because it was never unlocked in the first place if you activated it with T-Mobile. Sim/Contract free and unlocked do not mean the same thing. You will have to wait at least 2 months now before T-Mobile will consider unlocking your phone and then you won't be able to get 4G in the UK and you have no UK warranty, only US where you purchased the phone.
Why not buy a new phone in the UK that is unlocked and sell the US one?

Satellite P300-19P not able to capture audio using Chicony Cam software

Hey,
I recently upgraded to windows 7 from vista and since then i have not been able to capture audio with the camera assistant software.
I have tried uninstalling and reinstalling, repairing the program, changing the audio settings, running in compatibility mode, i have practically exhausted everything i can think of.
Can anybody help at all?
Marc
Toshiba Satellite P300-19P
Windows 7
32-bit OS
PSPCCE
(if any other info is required then please ask me)

Hi
You mean you are not able to record the audio using the internal microphone.
Is it right?
In your case I would recommend checking the audio device settings inside the camsoftware.
In settings -> audio tab (last tab) you will find the necessary settings.
The audio device field should contain the microphone (2 Realtek high definition device) and the audio volume option should be set to max (to right).

How to record an audio using j2me

hello i'm new to this.
i have some sample code to record audio in wireless toolkit
but i got error in "setOutputStream()"
this is my code.any one help me....................
code :-
====
try
// create the Player object using amr encoding
p = Manager.createPlayer("capture://audio?encoding=pcm");
p.realize();
// get the RecordControl over this Player
RecordControl rc = (RecordControl)p.getControl("RecordControl");
// create an OutputStream which the RecordControl will use
// to write write the recorded data.
ByteArrayOutputStream output = new ByteArrayOutputStream();
rc.setRecordStream(output);
// start the recording
rc.startRecord();
p.start();
messageItem.setText("recording...");
Thread.currentThread().sleep(5000); // record for 5 seconds
messageItem.setText("done!");
rc.commit();
// save the recordedData in a byte array
recordedSoundArray = output.toByteArray();
// close the player
p.close();
} //try
catch (IOException ioe)
errorItem.setLabel("Error");
errorItem.setText(ioe.toString());
catch (MediaException me)
errorItem.setLabel("Error");
errorItem.setText(me.toString());
catch (InterruptedException ie)
errorItem.setLabel("Error");
errorItem.setText(ie.toString());
}//if

hai all,
im new here ..i have problem in recording audio using j2me..my code is as below
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.control.RecordControl;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
public class recordMidlet extends MIDlet implements CommandListener
private Form init = new Form("info");
private Command rec = new Command("rec",Command.OK, 1),
stop = new Command("stop",Command.STOP, 0),
exit = new Command("exit",Command.EXIT, 0);
private byte[] recordedSoundArray;
private Player p;
private RecordControl rc;
private ByteArrayOutputStream output;
public void startApp()
init.addCommand(rec);
init.addCommand(stop);
//init.addCommand(exit);
init.setCommandListener(this);
Display.getDisplay(this).setCurrent(init);
public void pauseApp()
public void destroyApp(boolean unconditional)
public void commandAction(Command com, Displayable dis)
if(com == exit)
notifyDestroyed();
else if(com == stop)
init.removeCommand(stop);
init.addCommand(exit);
try
init.append("finish record... starting playback\n\n");
rc.stopRecord();
rc.commit();
p.stop();
p.close();
init.append("playing...\n");
recordedSoundArray = output.toByteArray();
init.append("recorded sound = " +String.valueOf(recordedSoundArray.length)+"\n\n");
ByteArrayInputStream recordedInputStream = new ByteArrayInputStream(recordedSoundArray);
Player p2 = Manager.createPlayer(recordedInputStream,"audio/x-wav");
p2.prefetch();
p2.start();
//init.append("finish playing...");
catch (Exception e) {
init.append("stop command: "+e.toString());
else if(com == rec) {
try {
init.append("record voice ...\n\n");
// Create a Player that captures live audio.
p = Manager.createPlayer("capture://audio?encoding=pcm&rate=8000&bits=16");
p.realize();
// Get the RecordControl, set the record stream,
rc = (RecordControl)p.getControl("RecordControl");
output = new ByteArrayOutputStream();
rc.setRecordStream(output);
rc.startRecord();
p.start();
} catch (Exception ioe)
init.append(ioe.toString());
i get error from ktoolbar window..
Warning: To avoid potential deadlock, operations that may block, such as
networking, should be performed in a different thread than the
commandAction() handler.
Emulator is not working after that..and it jus shows text
" RecordMidlet wants to record an audio clip.is it ok to record? then the emulator hangs..
could someone help me to solve this problem..is there any setting problems in j2me wireless toolkit ?
im using J2me wireless toolkit 2.5 for CLDC beta 2 .
thanks to all.

Streaming Video and Audio Using Flash

Need help, streaming video and audio using Flash and/or
Dreamweaver, want it to load fast and be very clear. It is
imparitive that I have control buttons. Can any one assit me in the
best methods to follow that will give me the performance variance.
Jason

Check out tutorials & samples here : http://www.adobe.com/devnet/flashmediaserver.html
You can check even fmsguru.com : http://fmsguru.com/tutorials.cfm?tab=all

Streaming audio using AudioToolbox

I have successfully managed to stream audio over HTTP to the iPhone/iPod touch using AudioToolbox (AudioFileStream and AudioQueue).
This worked great, but came with a problem.. When streaming larger mp3/mp4 files (10MB+) you can get a lot of data cached in RAM before it is played back. This causes the iPhone OS to kill the application because it's using up too much memory.
I then tried to cache data on disk instead, and read the data with a normal AudioFile. This, instead, came with problems like how much data to pre-cache and how to know if the audio had stopped playing or if you just ran out of data for example.
Anyone have any other ideas?

Hi
I was trying to stream audio using the AudioToolbox framework. I get stuck when trying to stop a song in the middle and play another song. Can you please help me out with it!

High pitch noise when recording audio using internal mic

The issue I am having is with the internal mic. When recording audio using quicktime or garageband.It is a high pitch noise that stays whether i am speaking or not. The fix i found was to lower the input volume of the mic in system preferences. However, this causes my voice to be recorded so low that audio is barely usable unless volume is all the way up. Looking around the web I found this gem:
http://www.usingmac.com/2009/6/18/recording-speech-with-garageband-2009
This help me get rid of the high pitch noise for Garageband. The noise still there for Quicktime. Any ideas on how I can keep the same mic input volume with out having to listen to the high pitch noise?
Any help is appreciated.

Did you do the usual stuff, such as reset PRAM?
http://support.apple.com/kb/HT1379
There are some sound settings in PRAM, although I think it's only for sound output.
Also, as a test, I would create a new admin user account in System Preferences Accounts pane
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
Log out and log in to the new account (do not use Fast User Switching). In the new account, try recording something using QuickTime, and note if this problem recurs. If it does not, you have eliminated a few possible causes, such as a problem with the overall system installation or a hardware issue, and isolated the problem to something in your normal user account.

Cannot record audio using Audition

After I installed M-audio software, I cannot record an audio using Audition. I uninstalled M-Audio software and reboot the PC but still cannot record anything.

This is a duplicate; see other thread.

How do I configure Soundtrack Pro2 to play audio using Digidesign 002 Rack?

How do I configure Soundtrack Pro2 to play audio using Digidesign 002 Rack? I have no problem using Logic 8 with the 002 Rack?
Can somebody explain the necessary process to make this work. Thanks

Add is probably not the best choice of terminology.
Going from memory (since I'm at home), you need to launch digiCoreAudio, then select your output in the System prefs as your digi hardware. After that you would see the digi hardware as an output in STP.

55vx700u No audio using Pandora

The TV is awesome.Not getting any audio using Pandora? Audio is set to stereo, tv is connected to wireless router.

Do you see this?
or this?

No audio using WinDV

Similar Messages

Maybe you are looking for