No Audio via Blackmagic when using Blackmagic Sequence Presets

Hallo Everyone,
I'm using Premiere 5 on Win7/64Bit with a Blackmagic Decklink using the latest drivers (10.3.1).
When i use the Blackmagic Sequence Presets, i have perfect video but no audio. When I'm scrubbing through the timeline, i can see the Audio meters showing a signal, but when i press play, there is no audio visible and audible. The clips definitely contain audio, i also tried it with the testtone generated by Premiere.
When i make a new sequence (in the same project) and using other presets (non Blackmagic-Presets), then i have audio, but no video (which is clear to me). Audio out via Blackmagic is also working in any other Windows Software.
I reinstalled the Production Premium Bundle and reinstalled the Blackmagic drivers afterwards, but nothing helped.
I appreciate any suggestions.
Regards
Peter

These are my settings:

Similar Messages

  • Buffering video downlowds via Quicktime, when using a HSDPA USB modem.

    Hi,
    Does any one else experience very poor streaming performance via Quicktime, when using a HSDPA USB modem. Every time, when using the Quicktime player and receiving data via a HSDPA USB modem, there seems to be minimal buffering of that data, so that the video quality is extremely pixelated and virtually unwatchable; are there settings that can be altered to correct this problem? This issue seems to be so petty, yet Apple is unable to offer a solution? That doesn't seem right?
    Regards,
    mike_biz

    Is this a file that Quicktime PRO is not able to open?
    Yes. Your camera's native video format is MPEG-4 and appears to possibly be "muxed" with MP3 audio.
    If not, is there anyway that I can convert this file to one that I can use on my Mac?
    Try installing the free Flip4Mac component. Then try playing the .asf file in the QT Player.
    Is it possible to upload from my camcorder via the included USB cable and convert directly through Quicktime PRO?
    If your file plays using the Flip4Mac player component, you may then wish to consider purchasing full conversion codec which will allow you to export your DXG-305V files to any frame-to-frame synchronized QT compatible format in QTPro.
    ADDED: Sorry about the duplication, too slow with my response.

  • The problem is with the new operating system  and sending photo via email when used in my iPad.   From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

    The problem is with the new operating system  and sending photo via email when used in my iPad.
    From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
    Can you amend he system to allow emails to be sent from photo as previously.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • Can I get audio through iPhone when using apple tv?

    Can I get audio through iPhone when using apple tv?

    What do you mean exactly? Are you wanting to output the audio to your iPhone while say watching a video on your Apple TV?  If so, I'm afraid it's not possible.  However, you should post this in the Apple TV forums for a better confirmation on then.  There are some prettty knowledgable people who hang out there.
    https://discussions.apple.com/community/appletv
    B-rock

  • Audio Output Corruption when using USB MIDI keyboard controller

    recently, i'm getting intermittent corrupted audio output (short blips of distortion) while playing through my usb midi keyboard. i thought maybe some data got corrupted on the disk over time so i wiped the drive, reinstalled osx, installed all updates, hooked up usb keyboard and all worked fine. today, i plugged in the keyboard and the distortions have reappeared. i unplugged the keyboard and played with the Musical Typing- still distorted. i rebooted and tried Musical Typing- still distorted. I removed the usb midi keyboard device from Audio MIDI Setup, rebooted, and the distortions have disappeared when using Musical Typing. Connecting the keyboard causes the distortions to reappear. I'm at a loss.
    Any ideas?
    environment:
    macbook pro
    osx 10.4.11
    gb 4.1.2
    studiologic vmk188 plus

    UPDATE:
    I decided to try going through an Firewire Audio Interface instead. Keyboard-(MIDI)->MOTU Traveler-(Firewire)->MacBook Pro.
    Same corruption/hiccups/choppy playback.

  • Can I disable the audio pitch adjustment when using frame rate conversion?

    We have a mov file containing digitized film material with audio scanned at 25 fps (1 frame film for 1 frame video) while the film should be 18 fps.
    So both video and audio are too fast.
    Compressor provides the framerate conversion so source plays at x frames per second.
    This works well for video but the audio slowed down remains the pitch it has in the original speed. A great feature but an unwanted result in this case.
    Audio should be at a lower pitch since it was recorded too fast.
    Can we disable the pitch adjustment, when using rate conversion, so the pitch is corrected (lower) as well?

    Hi Jason
    This does sound tricky - the only other suggestion that I can add to David's is to use the smallest GOP setting you can, I'm in PAL land so the default is 12frames but I push it down to 7, this forces more I-frames into your mpeg. It makes the file size higher but in a project your length it doesn't matter. Make sure you encode your audio to .ac3 (use the Dolby 2.0 preset in compressor). Although David's limit is 7.4, if I'm not playing back on a laptop I'll set my CBR to 8Mbps (in Compressor CBR is called 'one-pass').
    Once you create your mpeg, play it back in Quicktime first to make sure there are no artifacts full screen (with Simulators reduced size sometimes artifacts exist in your orig mpeg that you may not notice).
    Also as David said, DVDSP doesn't re-encode an existing mpeg so something else must be going on. Before you re-import your new mpeg, delete your DVDSP prefs and any menu mpegs that it has created.
    If you have Toast, try just doing a Build, instead of Build & Format. This will give a VIDEO_TS folder that you can then burn in Toast. Use the Data tab and select DVD-ROM/UDF.
    If this doesn't work I don't know what will.
    Good luck!
    B

  • Audio cuts out when using Interfaces

    Just recently bought my first iMac, with plans to use it for multi-track recording. The audio is cutting out when using FireWire or USB interfaces to record and/or play audio. For instance, with an Edirol FA-66, even iTunes experiences brief periodic audio loss (every 20 seconds or so) when playing through the device. PreSonus Firebox works a bit better, with a 1 to 3 second loss every 40 seconds or so... this happens when using OSX as well as XP... the operating system doesn't seem to influence the problem. To be certain it wasn't a FireWire issue, I tested it with an M-Audio USB interface and had the same audio loss.
    Talking with tech support, the first guy just blamed everything on the 3rd party devices. That drove me CRAZY. Finally he got a specialist on the phone, who blamed it on the intel chip.
    Right now I'm just living with it... trying to record songs in smaller pieces. I wait for the audio to drop, then as soon as it comes back I hit record. I've got about 40 seconds (using the Firebox) which is enough to lay down a verse or chorus.
    I'm just hoping, HOPING that someone at Apple is looking into these things.

    Hello,
    This may be a stretch but your mention of " hard drive hanging" prompted me to suggest your problem may involve low data transfer rates. (I mean, the hard drive may have too slow.)
    When, for example, Final Cut Express or Pro are being used, they require high data transfer rates to avoid frame dropping. Apple's article on the HD requirements for those apps is here:
    <http://docs.info.apple.com/article.html?artnum=58636>
    eMac/ 1 Ghz / combo, 120 GB Mercury FiWi extnl   Mac OS X (10.3.9)  

  • M-Audio not connectin when using firewire 800 drive

    Computers that have both a FireWire 400 and a FireWire 800 port may be sharing the same FireWire bus internally. When using both, the 400 and the 800 port at the same time, you may experience problems like audio drop outs or loss of connection to the M-Audio FireWire interface. There's a variety of possible reason for this including but not limited to bandwidth limitations, clocking issues (400/800) and bus master problems with the devices connected to both ports. M-Audio recommends using the M-Audio FireWire audio interface on the computers original FireWire port while adding a separate FireWire interface card to the system (PCI or PCMCIA). Connect any third party FireWire 800 devices to the added FireWire interface card.
    But will this really fix the problem?
    M-audio says yes & apple says maybe.
    Sound like a serious flaw with apples firewire bus.

    Damian,
    Following are my experiences. My setup is listed down below.
    -Yes, that will fix the problem. The bottom line is, M-audio FW box doesn´t like to share disk drives on the G5 firewire bus (both 400 aand 800). So yes, 400 and 800 FW ports are somehow connected internally, sharing the same resources.
    -I had a spare FW 400 PCI card lying around, and I attached my disk drives to that. Didn´t start to look around for a FW 800 card though.
    -And although it seems like a fault on Apple´s side too, I can´t speak very highly on the FW410 box either. Every time I do an update on my system, the 410 install gets messed up (won´t show devices in AudioMidiSetup, the only cure is to uninstall and re-install).
    And the other interesting thing is that every time my Mac boots up, the 410 control panel mixer page is all messed up with funny pan positions and fader values. A reset does the job, but this has to be done every time I boot up. Maybe this is working in Tiger.
    I tried solving this with the M-Audio support, and after describing my problem, they just said I should call their tech support. Being on the other side of the world, I shurely don´t wanna max out my phone bill.
    Haven´t upgraded to Tiger yet, don´t want to keep upgrading all the time. In general the system is working nicely.
    B.R.
    J. Lampela
    www.neomusic.fi
    My setup
    G5 1.8 DP 2,5 Gb RAM
    Panther 10.3.9
    1 external S-ATA (LaCie)
    2 external FW
    M-Audio FW410 (1.5. driver)
    Logic Pro 7.1

  • Beginning of audio cut off when using digital optical out

    Hi all,
    This is my first post here since switching to Mac earlier this year.
    I'm having problems with the first second or so of audio being cut off when commencing playback using the Mac's digital optical out.  This happens with any source of audio in a variety of different applications (e.g. video, iTunes, even system sounds for notifications and the like).   I have used a mini Toslink to Toslink optical cable to connect from the Mac's audio out jack to the receiver of my digital speakers (Logitech Z906).  Once playback has commenced, audio plays fine; it's just the very first second or so which is usually clipped.
    The problem does NOT happen when using the built-in speakers.  I've also noticed that if I unplug the cable from the receiver end (leaving it connected at the Mac end) I can see the red LED light shining the optical signal down the cable, but this goes out exactly 30 seconds after audio stops playing.  If I start another audio playback within 30 seconds, there is no loss of audio at the beginning, but if I wait longer than 30 seconds (i.e. after the LED has gone out) I encounter the problems with the initial audio being clipped.   I therefore suspect that this is an OS issue which is shutting down the digital optical out when audio is not actually playing (presumably to save power or something).  I wouldn't have a problem with this if it actually worked properly when audio playback recommences, but it seems that there is a slight delay whilst the optical out service 'wakes up' again and this is leading to the clipped audio.
    I've done some searching of the internet (and these support communities) for this problem and there seems to be little information about it.  It does seem to affect a few other people though and some have resorted to third party applications or scripts which play silent audio at regular intervals to keep the optical output running permanently (e.g. SoundStay (https://www.macupdate.com/app/mac/39833/soundstay) - no longer maintained and the download link is dead).  However, these amount to a kludge at best which treat the symptoms rather than the underlying cause, which I would rather resolve.
    I tried to log a support case with Apple in order to have them call me, only to have the system tell me that my support has already expired, despite having purchased the Mac only 4 months ago.  It seems that my Apple One-Year Limited Warranty is actually only 90 days when it comes to telephone support.  So here I am! 
    Does anyone else have this problem with optical out, and how can I resolve this?  Any help would be gratefully appreciated.
    Thank you.

    Hello kcore66,
    Would it be possible for you to upload one of the files in
    question so that I can take a look. In Captivate 1.01 there is an
    intermittent problem where sometimes the audio is either cut off or
    just doesn't play when you publish / preview. To get around this
    simply moving the audio object back and forth along the timeline
    and then positioning it back in it's original position works 9
    times out of 10.
    HTH
    Regards,
    Mark

  • Click/Tick/Hiss sound before audio comes on when using headphone jack.

    This started happening yesterday on my 1.5 week old macbook. Whenever an audio source comes through after a period of silence, say on IM without any music from iTunes playing or when you just start playing a song in iTunes, there is a short but very distinct ticking sound that happens before the audio is played. At first I ignored it but after a while, it got really annoying; especially when you're typing in an IM conversation and the tick happens on every send and reply. Is anyone else having this problem? Should I call up applecare/visit my local apple retail store?
    It happens on both battery and AC. I've already tried resetting the PMU. I don't think it happens when using the macbook speakers, but I can't say for certain since the freqeuency response on them are pretty bad. And this also happens when I boot into Windows using bootcamp.
    P.S. If it turns out that this is a defect, since this is a custom build to order machine, should I call applecare to get it taken care of or would I be fine if I went to the apple store that's 20 mins away?

    I just tested using my headphones. I can hear a very short, soft, single tick sound when I click to start playing a track in iTunes. I've never noticed it before. But I don't do IM a lot.
    Unless you're hearing something more dramatic, I think you would have a hard time convincing someone in an Apple Store that it's a defect worth fixing.
    What about visiting an Apple Store, take your headphones, and try them on floor samples to see if they all do it? If not, you could make a case.

  • IPhone audio too soft when using car audio jack...

    iPod touch audio is soft when I hook it up to my car audio jack.  I have to turn up the car volume almost to max! I have checked the volume level settings on the iPod...no change?

    You should post your question over in the iPod Touch forum (this is iPhone).

  • How is image resampled when using Crop Tool Presets?

    If I use the Crop Tool preset of 4 X 6 inches on a 8 X 10 inch image of the same resolution, what type of interpolation does PS use to reduce the image size? I am reducing the size of a finished multilayered file to insert it into a greeting card template.
    I know that when using the Image Size dialogue, you can choose whatever type of image interpolation you want, like bicubic sharper for reducing the size of an image. Can you do the same with the Crop Tool? Thanks.

    chris -
    could this be included in the option bar to change the resampling per instance instead of a prefs setting?  I set up some actions to change the prefs for up and down scaling and then revert to the default pref setting. But it was never convenient so I don't use the actions.
    or maybe just and pref to use "smart scaling" that chooses the interpolation method based upon whether it is up or down scaling.
    j

  • Audio cutting out when using D2 external Firewire Drive

    Hi,
    I have just upgraded to Logic Studio, using the following setup:
    Macbook Pro
    Motu 828
    AMT 8
    Logic Studio
    D2 Lacie 500GB Firewire Drive
    As the MacBook's internal hard drive is not sufficient to record and playpack efficiently, I was advised to get an external Firewire Drive. Given that I have very little space on my laptop - (am running windows on a partition also) I am trying to save my logic files to the external HD. When creating tracks specifically using Audio Instruments, the playpack keeps cutting out.
    I am connecting the HD via usb 2. I am also having to freeze the tracks in order to record more layers. There is lots of clipping and latency. I thought by using the external, this problem would be resolved.
    The HD is not playing back the tracks fast enough, and keeps cutting the audio out. The audio cuts out everytime the blue light on the drive flashes.
    I cannot save the files to the MackBook HD as there is notenough space.
    Is there something very wrong with my setup?
    any advice would be really appreciated.
    ps. I am a bit of a newbie
    thank you in advance.
    Spy

    Connect it via firewire 800. USB2 is not good for audio or video streaming.
    I have 3 D2's connected to my mac pro, works like a charm.
    good luck.

  • Audio export issue when using Multiband Compressor

    I'm having an audio issue when exporting from Premiere Pro 5.5. I have a number of clips that I've used the Multiband Compressor on. Some audio clips are straight cuts with no gaps, some have a 3-frame cross fade. When playing back in Premiere everything sounds fine. When I export the sequence the audio drops out for about a frame in between each audio clip which contains the Multiband Compressor effect. This occurs no matter what codec used during export, and when only audio is exported.

    I have the same problem. EXACTLY. I thought I became crazy, but not. What a pity, because Multiband Compressor is really impressive for a lot of situation, especially when there is voice.

  • No audio on TV when using HDMI

    Hello,
    I just bought the Satellite P875-S7200 and I connected it to my HDTV using HDMI. The problem is there is no sound coming out on the TV but there is sound on the laptop.
    I've checked the Playback Devices when you right-click the speaker icon from the taskbar and I don't see any HDMI option in there.
    How can you switch the audio out to the HDMI?
    Please help. Thank you very much.

    Satellite P875-S7200
    I've checked the Playback Devices .. and I don't see any HDMI option in there.
     Right-click in that box and make sure you have the two items shown below checked.
    -Jerry

Maybe you are looking for