No audio video streams upon import of .mov files?

Hi... recently upgraded OS onto Intel 240 GB SSD. Running Widows 7 64 bit, clean re-install, 24 GB RAM, NIVIDIA Quadro FX 4800. I have been trying to optimize the system for maximum GPU accelerated effects while also taking advantage of the high speed read and write of my disk. OS runs on SSD, Adobe media cache on separate 2 TB eSATA connection, Media stored on external drive USB 3.0. Without getting into the fine details this is a snapshot of my workflow.
The few problems I am encountering are some .mov files cannot be imported to PP. Error reads no audio or video stream in the files. I suspected metadata issues so tried to import with media browser and still no luck. These files worked perfectly before I began surgery 2 days ago on my computer. I have installed the latest version of quicktime and yet to no avail. Any recommendations here regarding my issue with imports or suggestions to benefit from my hardware would be appreciated.

MOV is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Similar Messages

I have an older Sony digital camcorder, and I am having trouble importing the movie files. Sometimes I get the audio in iTunes without the picture. I have a Pinnacle Dazzle interface. What am I doing wrong. Is there a way to skip the dazzle device?

I have an older Sony digital camcorder, and I am having trouble importing the movie files. Sometimes I get the audio in iTunes without the picture. I have a Pinnacle Dazzle interface. What am I doing wrong. Is there a way to skip the dazzle device?

Chances are the pinnacle is producing .avi files or MPEFG1/2 streams - iTunes may know how to decode the audio but not the video. Download Handbrake and try running the Pinnacle files through it and adding to iTunes - use Universal format unless you have a specific device in mind.
Keep copies of the originals.
Another option might be to try to install Perian. Can't remember if the Apple MPEG2 plugin allows MPEG2 to be played in iTunes.
AC

When i try to import a .mov file, it only imports audio

when i try to import a .mov file, it only imports audio - what cani do to fix? windows media player plays it fine

Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
The Help-and-Tutorials page http://forums.adobe.com/thread/1275830 may help

When i import H264 .mov files the audio slows down. MAC

I have a mac, running Mavericks OSX and i'm using Premiere CC.
When I import a .mov file with h264 encoding the audio plays back very slowly.
I know that Premiere can't handle h264 in an avi wrapper or so it has been said in old forums, but these are .mov files. How has this been an issue since CS 3 and it hasn't been fixed?
I would expect an import setting could be changed to fix this but i can't seem to find any import settings.
other than transcode everything again, is there an easy fix for this?
Thank you for your help.

Are these files MPEG compressed files? iMovie can not deal with the multiplexed audio of those files. For suggestions on how to get them right start here...
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
And if your files are not MPEGs, some of the suggestions on that page may still do what you need done.
Patrick

Audio/Video stream & MulticastSocket

Hello to everybody!
I want to send to many clients an audio/video stream (captured from mic/webcam) using MulticastSocket.
I found in some code examples that MulticastSocket is used setting a byte array with a particular size for buffering data (sending and receiving phases).
I want to ask you if you know what size I have to use for transmitting WELL audio/video stream captured from mic/cam. What is the best configuration?
Thanks in advance!
Best Regards.
Luca___

Hi,
have you checked with your Internet Service Provider (ISP) yet ?
Some ISPs make a disconnect at a specific time in order to prevent users from using it for purposes not allowed by the ISP.
At least here in Germany this is common behaviour with most DSL provider.
Regards
Stefan

P2p audio video streaming throws permission error.

hi,
i am trying to do p2p audio video streaming using latest api & palyer version. But for guests, although the room has auto-promote=true, it throws permission error .
Error: You need to have owner permissions for changing Multicast property
    atcom.adobe.rtc.sharedManagers::StreamManager/set streamMulticast()
    attraineravc/onSessionCreation()
    attraineravc/__cSession_creationComplete()
    atflash.events::EventDispatcher/dispatchEventFunction()
    atflash.events::EventDispatcher/dispatchEvent()
    atmx.core::UIComponent/dispatchEvent()
    atmx.core::UIComponent/set initialized()
    atmx.managers::LayoutManager/doPhasedInstantiation()
    atmx.managers::LayoutManager/validateNow()
    atmx.core::Application/resizeHandler()
But when I login using my adobe developer account it seems to be working fine. (at least the above error is not show).
What am I missing?

Hi,
You are trying to set streamMulticast property, and as it is a room level property you need to be a host to do that. Only users with owner role can set/unset multicast in a room.
Its a one time setting and need not be set by each user. So removing the code that sets the streamMulticast by all guests would fix your issue.
Thanks
Arun

Importing mpeg1 movie files

I'm trying to import mpeg movie files into fcp. The files import and the video is there and plays however i'm getting no audio?? I tried dropping the file in the timeline and that didn't work either. Also it wouldn't play in the timeline without dropping frames. Any suggestions would help.

Welcome to the Boards
Sounds like whatever flavor of MPEG you are using is not one that can be used (audio track not coming through) and/or easily workable (dropped frames), you may need to use Mpeg Streamclip http://www.squared5.com/ to convert to something that can be used in Final Cut

Just upgraded to Lion and can no longer import any .mov files ("file not supported") to 3.1.3. Also can no longer view any .mov or .mp4 files already in library.

Have been using Aperture 3.1.3 with no problems. Importing from a Nikon D80 (RAW & JPEG), Casio (.MOV) and Flip (.mp4). Could import and view all videos without issue prior to Lion upgrade. After Lion installation, can no longer import .mov files (get "file not supported" error) or even view any .mov or .mp4 files currently in library (even though thumbnail is present). Can watch the .mov files directly on my camera using Quicktime in Finder but can't even drag & drop that file into Aperture. Anybody else having similar problems?

Still no resolution and Geniuses at store could not assist. Unfortunately, it looks like not all the applications were ready to support the Lion operating system. We could not import any .mov files, could no longer view any .mov files already in my Aperture library and could not email any .mov files. Totally frustrated. Use Aperture almost daily and can't lose the video functionality. Was also running dog-slow. Constantly looking at the spinning wheel. Geniuses suggested that I wipe out hard drive and reinstall Snow Leopard. Had full backup on external drive with Time Machine.
Not an easy process though...had to reinstall several times (at 5 hours each time) because I continued to have issues. Finally figured out that I needed to delete every backup file from Time Machine on external drive from the date I installed Lion because some of the hidden files were still migrating back to Snow Leopard.
I had to:
1. Delete all time machine backup files from date/time of Lion installation forward
2. Do "clean" installation of Snow Leopard (wiped hard drive using disk utility and booted with Snow Leopard disc)
3. Chose option to reinstall from backup off Time Machine which eventually got me back to Snow Leopard desktop
4. Deleted Aperture program and reinstalled (I had to install Aperture 2 and then install Aperture 3 upgrade.
5. Reinstalled iLife apps
5. Applied all Apple updates available (again this took a few hours because there were several updates from Snow Leopard's original release plus Aperture 3 and other application updates)
Still doing some tweaking on some of my other apps but got everything back to where I originally was. Now plan to wait on a few version updates from Lion before reinstalling.
I am one of Apple's biggest fans, but was very disappointed in the fact that I lost functionality in one of their own pieces of software (which I use the most!) by installing Lion.

Having problems importing my .mov file.

I am having problems importing several .mov files into iMovie. I also can't import .wmv files and I have been utterly confused. I know I have to convert the files but I don't want to pay for a program because I will only be converting 4 files. Please help!

What is Mpeg Streamclip
It is a free conversion application that accesses the QT structure and all installed QT components without having to pay the $30 for QT Pro or purchasing GarageBand. It's "engine" is MPEG-based, so it can do some things that QT Pro cannot do ( e.g., retaining audio content when converting multiplexed compression formats). On the other hand, it cannot perform layer operations like QT Pro can so these applications are somewhat complementary.
and is there anyway you can send me a link to download this program please?
MPEG Streamclip

I can't import any movies/files from my desktop to make an iMovie

I can't import any movies/files from my desktop to make an iMovie. It worked a few days ago and now I can't do anything. Also, is there a way to get rid of all the movie files that I don't need anymore? Thanks!

Natibe wrote:
I can't import some audio files from my computer to Logic, They play in iTunes but when I import them to logic , the regions become black almost and have no sound. Other wav's files play normally. What's the problem?
What type of audio files? What bitdepth and samplefrequency?

Trying to import a .mov file made with gotomeeting - no problems in past yet says No importable files -None of the selected files or folders can be imported. Change the selection and try again. re-recorded 3 times and still not accepting HELP

Trying to import a .mov file made with gotomeeting - no problems in past doing this. After 3 attempts recording the hour long video and trying to upload it to iMovie, it says No importable files -None of the selected files or folders can be imported. Change the selection and try again. What could the reason be?

After much research and troubleshooting, GoToMeeting replied with the final answer: We do not support the uploading of recordings to editing software. If you are having issues uploading a recording, unfortunately, we do not have tools or steps to resolve this. It is not a supported feature. I am sorry for any inconvenience this may have caused you.
The no longer plan to support editing of recordings made with their software. So, we are planning to find a new meeting provider.

When i import a movie file into iMovie,it somehow reverts to the shortened file of the same name that i previously had used

I'm trying to import a movie file into imovie that I know is 3hr16mins long but when it's finished importing,all I have in the programme is the heavily edited 51mins that i used in a previous project (using the same file),5 years ago. How can I stop iMovie from reverting back or could the much longer file be there and I have incorrect settings so I can't see it all?

Are these files MPEG compressed files? iMovie can not deal with the multiplexed audio of those files. For suggestions on how to get them right start here...
http://www.danslagle.com/mac/iMovie/tips_tricks/6030.shtml
And if your files are not MPEGs, some of the suggestions on that page may still do what you need done.
Patrick

Why does importing a .Mov file almost triple it's file size?

I have a Kodak Zx1 which is not recognised by iMovie (Kodak's fault I assume as there are no drivers etc. available for the Mac).
To get my movies into iMovie I download them onto the Mac hard drive and then import them into iMovie 09 using "Import" - "Movies from the "file" menu. I then opt for "optimize video" - and "full-original size". The files import with no problems but almost triple in size...eg 29meg to 84meg....does anyone know why?
Incidentally not ticking the "optimize video" option does import the movie with an identical file size .... however.... the movie playback is very jerky in the movie viewer pane ...again, does anybody know why?
Thanks in advance everyone.

does anybody know why?
In simple terms, in order to edit your footage, iMovie needs a certain amount of data about each frame.
In the compressed form stored on the all the necessary data isn't present, so the missing pieces have to be filled back in to allow you to edit. This process increases the file size.
Once you've edited your movie it can then be re-compressed.
Matt

I can't import the .MOV file .how to i use it??

i can't import the .MOV file .how to i use it??

You might need to tell us a bit more about your problem. Do you mean you can't import a video file into Premiere, or your computer is having trouble playing Quicktime files?

After I import a movie file from the camera memory card, Imovie 10.0.1 acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it worksnow? Thank you, Filippo

On IMac 10.9 After I import a movie file from the camera memory card to Imovie 10.0.1 it acts as if the memory card is empty though I know it isn't.... I can't import that file to iMovie again.. is that the way it works now? Anyone know? Thanks, Filippo

I would like to know this too. I imported a lot of files, then Imovie crashed. I went back in and they are not in imovie at all.
I reconnected the camcorder to import again and though they are still on the camcorder, I no longer see them in the available list of files to import. I'm sure there is some sort of simple setting somewhere that reveals all files even if it thinks they are imported.
Thanks

No audio video streams upon import of .mov files?

Similar Messages

Maybe you are looking for