No audio when compressing .mov to Mpeg transport stream (m2t)

Since reinstalling OSX and FCS2 I don't get audio when I compress a quicktime movie to mpeg transport stream, used to be able to do it. I'm playinh the m2t in mpeg streamclip and assume it will handle audio, settings in compressor look ok, (48K 16 bit) although the button for multiplexed mpeg i/layer 2 audio is greyed out and unticked !?

Answering my own query here, but in case it helps someone else ... there appears to have been sound all along, at least since I ticked the mpeg audio box on the extra tab. When the file is playing in mpegstreamclip you have to work the volume fader down and up again at which point the sound comes on (yes it was faded up initially)
Wierd one, its almost as though there was a faulty physical fader rather than a virtual one.

Similar Messages

  • Compress ac3 into mpg transport stream

    I have a surround mix from Protools and I need to make an Mpeg Transport stream with dummy video.
    I mixed the surround as L,R,C,LFE,Ls,Rs
    I brought the mixdown into Compressor manually as instructed in the manual.
    The digital Dolby settings don't have the surround setting I used. The closest is L,C,R,Ls,Rs with a checkbox for LFE.
    There is a big whole in the program. In Final Cut Pro I was able to set the Surround Audio settings to my prefered setting
    Anybody know what I am dealing with? Anybody find a way to the finished end of this job?

    Is there any way to do it in FCS2? We're playing around...from what I've read today, Compressor 3 will make either or, but not both. One guy is swearing he saw it done at NAB.

  • No Audio When Compressed To AC3?

    when i compress my movies (from fcp using compressor, mpeg-2 video and aiff audio), everything is fine. when i change my preset to mpeg-2 video and ac3 audio...i get no audio when i bring my project into dvd studio pro. there is an ac3 file, but it's just silence. any ideas what i could be doing wrong?
    I have some menu music that is aiff...and that plays in the dvdsp simulator just fine...is the ac3 audio not playing because i have two different formats of audio in my project? if i change my menu music to ac3, will that work? it takes so long to compress a movie and run a test, i thought i'd ask some pros for some help to see if i'm doing something that's obviously wrong first.
    thanks!

    I think you answered your own question. All audio should be AC3.

  • Lose audio when watching movies

    When I first started using ITunes and I downloaded movies they worked fine, I could watch the whole movie no problems. I think it was after perhaps the fourth movie I downloaded suddenly I started having audio issues. I'd get about 20 minutes into the movie and the audio when cut out and then go out all the way. I'd have to shut down itunes and come back about a half an hour later and I'd get another 20 minutes of the movie and then the audio would go out again. I have to do that thru the whole movie. I've done all the suggestions to fix it.....don't use the enhanced audio, reinstall Quicktime ect but nothing seems to be working.
    Does anyone have any other suggestions I might be able to try?
    Thanks
    H.

    Same problem with all headphones and earbuds--just checked settings and Volume Limit was already off--starting to think it's a volume system flaw tied to videos and related sound.   No problem getting plenty of sound volume for music, only videos. 

  • Garbled audio when exporting movies using iMove 09

    Hello,
    Whenever I try to export my Movie using iMovie 09, certain scenes have garbled audio.
    The scene play properly within iMovie 09.
    It also has the same garbled audio when I try to share it to iDVD.
    Any suggestions?

    There is a well known audio glitch in iMovie '09. If making speed changes to your project, such as slow or fast motion, you must use only the presets shown on the speed slider. These are: 12.5%, 25%, 50%, 100%, 200%, 400% and 800%. Do not use custom speeds, by manually entering your own percentages.
    If you don't use the presets, you are highly likely to see audio problems in the exported project. As you have noted, the glitch appears only in the export but is not evident in preview (within iMovie).
    The only fix (other than going through a convoluted process) is to adjust all custom speed changes to the presets. This is a nuisance, of course, as you may have to resync the video and audio where you have added voiceovers or music tracks.
    John
    Message was edited by: John Cogdell

  • No Audio When Importing MOV into LifeType

    Hi
    I'm new to FCE and I was importing a mov file into life type. However, there was no audio when I tried playing the file. I am able to see the visual and the live fonts effects but somehow the audio is missing.
    Did I miss something ? Is this the right approach for creating a movie with LiveType effects ?
    Jojos
    P.S: The mov itself has audio when played via Quicktime.

    if I may ask for the steps I would be doing the following ?
    1. Create the titling effect in LiveType
    2. Export it to a quicktime movie
    3. Open FCE4 and superimpose it into my main movie clip
    4. Generate it as movie
    In step 2, do I render a movie or generate it as a quicktime movie? May I know what's the difference and which offers a better quality ?
    Appreciate your reply.
    Jojos

  • No audio when i import an mpeg movie to finalcut

    Hello everyone
    i am trying to import am mpeg movie file
    when i import to final cut pro i see the footage but there is no audio?
    When i play the files outside of finalcut i see and hear the clips
    Any suggestions?
    thanks
    Danny

    Open it in MPEG Streamclip and export it as a video and audio codec that matches an easy set up.
    http://www.squared5.com/
    Or use the original footage rather than the MPEG file.

  • Losing audio when editing .mov files...

    I have 4 .mov video files that are parts of 1 video. I can't get them into Apple TV, but I wanted to join them together in one video, anyway. I'm not having any luck doing that. (I have the right to have these videos.)
    I can bring them into a sequence in FCP 6.0.6, and even export them in a form that I can put on my Apple TV. But I lose the audio, which makes them useless.
    Probably worth noting: When I bring these small .mov files into my sequence, I can see them and scrub through them, but I can't play them at all (they all have the red line indicating they need to be rendered first). I have the latest iMac 27" with the i7 processor and two internal drives, so I can't see why they'd have to be rendered first. They are really low-quality, small files (around 3MB each).
    Can anyone tell me what the problem might be? Thanks for any advice.

    I have the latest iMac 27" with the i7 processor and two internal drives, so I can't see why they'd have to be rendered first
    FCP only works natively with formats listed in the Easy Set Up list. It does NOT work natively with many formats that are intended for final delivery like MPG-4, h.264 and others. If you import those types of files into FCP they WILL need to be rendered. But it is better to first convert those files before you import into FCP. That fact that you can't hear the audio may indicate you're using a muxed format that will need to be demuxed for editing.
    This information is easily found in the User's Manual. It sounds like this would be a good time to read the basics.
    -DH
    Message was edited by: David Harbsmeier

  • No audio when playing .mov files, codec missing?? Please HELP!

    Hey everyone, i recently exported a movie in submerge (a softWARE THAT lets u put subtitles into movies), i can watch it just fine in my computer, but when i put it in another, mac, i get the video but no audio... Im i missing a codec? i just downloaded the Xvid codec, but nothing, still no audio. What can i do? please help!!

    Load the movie into QuickTime Player, open the Movie Inspector (Window menu), and look at the Format section. That will show the codecs used for the video and audio, the audio being the second one listed. Post that information here and someone can probably tell you what you'll need.
    Regards.

  • No audio when recording movie with iPhone 4

    When I record a movie, my phone does not record audio. I am sure not to cover the mic area, and all it records is static.

    Had same issue from an iPad.
    After airplaying a movie rented on the iPad I had no sound from iPod app on iPad and also an audio stream in Safari would not Airplay to Apple TV 2.
    Videos were fine playing video and audio over Airplay. Photos app was happily airplaying images.
    All OK after reset on ATV2
    ATV 4.1.1
    iPad 4.2.1

  • No audio when playing mov files in WinXp SP2

    My quicktime 7.1 will not play any sound and Freezes up.
    I've set audio to safemode and video to to safemode,
    still no audin in playback.

    My Quicktime movies didn't freeze although I had
    NO Sound with Quicktime's movies made with our camera.
    solution:
    Open your Quicktime movie.
    Click; Edit
    Click; Preferences
    Click; Quicktime Preferences
    Click; Audio
    under Devices Click; Select Audio Playback and Recording Devices
    under Sound playback Click; Advanced
    under Speaker setup Click; Quadraphonic or the, stereo speaker choices
    (do not pick any of the Suround Sounds, 5.1, 7.1, or no speakers)
    You must close your Quicktime movie to reset it.
    Open the same movie or another one that wasn't working and listen for sound.
    If still no sound, follow this list back to Speaker setup and put it back where it was.

  • How can I get my audio to move down when I move my video up without making two separate moves?

    Hey
    I have moved to Premiere as a lot of the companies I edit for are now using it. Overall impression is GREAT especially CC vs 5.5 which I started in.
    In relation to my question, when I move my video track up a layer my audio stays on track 1 or whereever it started. This is really frustrating as it overwrites the exsiting audio when I move it.
    Is there are workaround other than moving the audio down first then moving the clip along, I find this slows me down a lot.
    Is this coming out in a new update, or is there a quick solution i missing?
    I am about to head into 8 days of fast turnaround multi cam editing so any help would be appreciated.
    Thanks
    Piers Faircloth Harding

    I understand that side of it, its a feature which I was used to in FCP and now I dont have it so was wondering if CC has this feature.
    In realation to audio not caring what layer it is on you are correct but if I want to shift it with my video to a different layer it is a labourous task when editing under pressure in time sensitive situations eg onsite VNRs for events where you have to have ambient bg or when you want ambient from b roll over talking to have to shift it down separately before moving your clip to avoid overwriting exsisting.

  • MPEG-2 Video, .m2v, Transport-Streams

    I have searched through all of the Forum but still no solution.
    Like many people here I have QT PRO (on Leopard) and the MPEG-2 Playback Codec (Version 6.4.1) installed. When I record from TV via Cable or DVB-T I always get a MPEG-2 Transport Stream. I know how to handle these and I know how to convert them. My question is regarding the Finder Preview Issue.
    When you have selected in Finder to show the Preview of a file it will go for a long cup of coffee when it comes to selecting a .m2v or MPEG Transport Stream file, i.e. the Finder crashes. This is a phenomina since QT 7. Apple promised a better handling of .m2v for the 10.3.9 Update but I cannot see any changes.
    I don't need to preview those files if it is not supported. This would be nice to have but I don't really need to. Is there anyone out there who can tell me how to
    1) prevent Finder Preview from crashing or
    2) get this to work
    I tried some hints from here like re-associating .m2v with the Quicktime Player but it didn't resolve my Issue. Is there maybe someone from Apple reading this and being able to help out?
    Many thanks in advance.

    Like many people here I have QT PRO (on Leopard) and the MPEG-2 Playback Codec (Version 6.4.1) installed. When I record from TV via Cable or DVB-T I always get a MPEG-2 Transport Stream.
    I may be wrong, but I don't believe "true" transport streams have ever been supported by the QT MPEG-2 Playback component and, by extension, would not be supported by either the Finder Preview or QuickLooK.
    When you have selected in Finder to show the Preview of a file it will go for a long cup of coffee when it comes to selecting a .m2v or MPEG Transport Stream file, i.e. the Finder crashes.
    M2V/AIFF elementary stream files, "muxed" MPEG (MPEG2/MP2 or MPEG2/MP1), and MOV (MPEG2/any compatible audio) all play fine for me in both the Finder Preview and QuickLook. The only problem are VOBs whose video content play fine in the QT Player but have to have their extension changed to MPEG to play in either the Finder Preview or QuickLook. Frankly, I am unable to duplicate your problem except for "true" MPEG-2 Transport Streams, which, as I previously said I don't believe have ever been QT compatible.

  • No audio on downloaded movie

    Downloaded a movie (Shut Up and Play the Hits, if it matters) and there is no audio when the movie plays. Songs in itunes work fine, just the video. Thoughts?

    I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • No sound when exporting .mov

    Can someone please look at these HBO videos and tell me why none of them will export with audio?
    http://www.hbo.com/deadwood/video/index.shtml
    All the HBO online videos are like this, they have no audio when exported.

    You can't "save" streaming media.
    Therefore you can't "export" the file.

Maybe you are looking for

  • Comments Status Disappears When Reopening PDF

    We're using Acrobat Pro 9.1.0 on WIn XP SP3 and experiencing a rather annoying isue. We are given marked up PDFs that we then either click the box next to the edit (using the checkmark feature) to indicate to ourselves that we've done the edit, or we

  • Document Splitting------------------It is very urgent

    Hi all i am woking ECC.6.0 Version We are Splitting Profit Center wise I want this entry Description         Profit Center                 Amount Rent A/c             1000                            2500 Rent A/c             2000                     

  • Functions in select statements - time consuming?!

    Hi All, I have a fairly complex view that uses a char based date (last business day) as one of the selection criteria. We have a report (based on the view) that needs to be run on a daily basis but the date will be different each day. I don't want to

  • Missing IDoc and recurring IDoc errors

    Hi, I would like to ask for a help or any ideas on below case. We encountered almost everyday a number of generated IDoc errors and the number increases everyday. All of these IDocs has Status "51" (application document not posted) and  description "

  • How to store contexts of HTMLB TextEdit in R/3

    Hi, I've searched everywhere for examples on this and found nothing. Has anybody managed to store contexts of HTMLB TextEdit in R/3 and retrieve them into a TextEdit ? As Eddy just taught me, 10 points to the best answer Milan.