No audio when exporting to 3gp ~ Quicktime Pro.

Hey guys!
I have looked everywhere for the answer to my problem, but cannot find an answer anywhere!
I have Quicktime Pro and am trying to export video files to 3GP formats to view on a mobile phone. The problem I have is that about 95% of the video files I have will let me convert the video, but not the sound ~ it says "No audio in source movie." I can't understand this as there is definately audio there (I can hear it!), but I cannot change any settings to switch it on! I have tried AVI, MPEG, & other file types, but to no avail... Can someone help!?!
regards,
Richard.

The most likely cause is that you are attempting to export from muxed mpeg files (mpeg-1 or mpeg-2). QT does not support the export of sound from such files:QT Mpeg Limitations
You can determine if this is your problem by opening the video in QT Player and opening the MovieInfo window, where the file type and compressor are identified.
One workaround if they are mpeg-1 is to download this freeware Windows application. It will allow you to convert mpeg-1 to uncompressed avi files (just open the mpeg and use Save as Avi from the File menu). QT will be able to read these files and will then allow you to convert to your choice of formats, like 3gp, with the sound intact:VirtualDub

Similar Messages

When exporting as a quicktime movie, final cut pro crashes!

When exporting as a quicktime movie, final cut pro crashes about 3/4ths the way through the 12 hour process. I'm saving it to a La Cie 500 GB disc by fire wire. It's worked before but after I converted one SD sequence (that was shot in HD)to a HD sequence, I haven't been able to export it and it won't play straight at anything bigger than 25% size. Please if you have any advice I won't forget it. I'm trying to export as ProHD 1060i.

I converted one SD sequence (that was shot in HD)to a HD sequence
How, exactly? And what were the settings of your new HD sequence? DVCPRO HD 1080 60i?

No audio when exporting from mpeg to flv

We have two PCs with Premiere Pro and AME installed, and just upgraded to CC. On one computer exporting works fine, on the other one, I'm losing the audio when exporting from mpeg to flv. I have used the same preset as on the other computer (that works) and also tried other presets that came with AME.
I can't figure out why this wouldn't work on one but works fine on the other? Anyone who knows?

How are you determining that the FLV has no audio? Are you playing it back in VLC Player or importing it into Flash?
Also, do you see a full range of formats on the system where you don't hear audio? If some formats are missing this might be a licensing issue. Also check if AME recognizes audio on the MPEG source (hover over it in the queue and look for audio info in the tool tip).

When exporting keynote to quicktime it is crap. why?

when exporting keynote to quicktime, it is really jumpy/jittery WHY!?!?!?
need help

Same thing happening to me.
Seems like it's a quicktime bug.
I see some discussion at http://www.jem-thematic.net/en/node/871
It seems to indicate the only way is to downgrade from QT from 7.5 to 7.4.5... and, if you use iMovie, this will also break iMovie, you'd need to reinstall... UGH.
Sean

Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?

Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?
I'm using FCPX 10.2
Yosemite 10.10.3
MacBook Pro (13-inch, Early 2011)
2.7 GHz Intel Core i7
8 GB 1333 MHz DDR3
500GB with 308GB free

It appears Apple's latest update has solved the issue. Whew!
MacBook Pro (13-inch, Early 2011)
2.7 GHz Intel Core i7
8 GB 1333 MHz DDR3
500GB with 308GB free
Yosemite 10.10.3
FCPX 10.2

Why no audio during screen capture in quicktime pro

why no audio during screen capture in quicktime pro?

Verify that your Mac has the right Input selected by default > OS X Mavericks: Adjust your computer’s sound input
Then, give this a try -from Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files - Apple Support
ÇÇÇ

Corrupted audio when exporting in Soundtrack Pro 2.0.2

Hello, I am a sound designer and have been evaluating Soundtrack Pro 2.0.2 as an alternative to Pro Tools (I work with video editors who use FCP). The program has been working well until I have tried to export my work.
I have created a project containing audio of the same sample rate as both the project and the computer's hardware - 48kHz (eliminating a problem already highlighted by others) and using no DSP. Although realtime playback is fine, the exported audio contains blocks silence as well as wrongly mixed levels.
I have noticed firstly that the problem changes depending on where the loop markers are set. The problem is sometimes eliminated if there is a reasonable amount of silence at the beginning and end of the region being exported. Secondly, I notice that fades are not being exported correctly - either being exported as silence or as full level (as if there is no fade applied).
I have also tried using Soundtrack Pro version 1, and this exports fine. It's worth noting, however, that this version of the software does not allow the user to apply fades to the audio (without opening and editing the waveform itself).
Any help/suggestions would be greatly appreciated.

I know the problem you mean - the plugin settings are lost when exporting. I think this is a separate issue that has been fixed. An example of the problem would be when adding a fade to a sound, and then exporting. The fade portion of the sound would export as silence, but the rest of the sound would export fine. Very bizarre, and if no-one else is experiencing it, possibly it is to do with my machine. Unfortunately it makes the software unusable for me. My colleague, who is running the same setup as me, has exactly the same problem.
The main thing I like about Soundtrack is the ability to add effects non-destructively to each sound, and then go back and edit each effect later on. Also, the video display is good- showing you the video at the beginning and end of a sound when moving it, plus also where your mouse pointer is clicked. It has the potential to be a very good program.
Pro Tools HD is very good but very expensive. I know some people who don't like it, so I think its down to personal preference. It is used in every professional studio I have worked in, making it good for compatibility. You also won't find nasty bugs like the one i've described in Soundtrack - they've been developing the software for a long time. Personally, I find Pro Tools very quick to work with and very stable. Also, I would recommend Pro Tools LE if you're not going to be restricted by 48 tracks and lack of surround mixing.

Audio problems when exporting files from Premiere Pro CS5

I try to post in English.
I have audio problems in Premiere Pro CS5 when exporting a film.
I cut an interview. The sound seems not to be synchronized when exporting a file. It doesn´t matter what file format I export. On cutting points the sound is different to the sound I hear in premiere. In premiere the audio sounds very good but in exported file I hear cracks on cutting points.
When I reimport the audio file an put it in the timeline the synch point is correct but the interview differs about 2 frames to the original audio in premiere.
The material was filmed on Sony ex3. The files are XDCam HD. I have updated the production suite.
Thanks for answers
Frieder

Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

What is the best export setting from QuickTime Pro 7 for standard DVD

I have several AVI movies I took and want to import them into iMovie, so I can create a DVD that will play in any DVD player or computer. (Along with a bunch of pictures.)
Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
I have export them using *_QuickTime 10_* and QTP7 to *MOV, MP4, & M4V* and the output is *+bad bad bad+*.
I have tried both export and save-as. Neither has done a good job.
The internal information of the AVI movies are: (as reported by QT)
Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
I have used several settings with not much luck including:
AAC, Stereo (L R), 44.100 kHz, MPEG-4 (Perian), 640 x 480, Millions
MPEG-4 Video, H.264
Should I be using a better application then QuickTime?
Is there a way to just use iDVD with the original AVI movies?
These are wedding movies and pictures that people are waiting for.

Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
That depends on your specific work flow and the codec(s) involved. Generally speaking, if the file plays in the QT Player and is "conversion" compatible, then the file can be added directly to iDVD (i.e., unlike iMovie '08/'09/'11 which requires the file to be "edit" compatible with QT).
I have export them using QuickTime 10 and QTP7 to MOV, MP4, & M4V and the output is bad bad bad.
The quality of your output file will depend on a number of things: primarily the quality of your source file, the efficiency of the target codec, and the specific settings used. (About which you did not elaborate.) The rule of thumb here is that your output will never be better than your input and each re-comprssion of the data has the potential to degrade the quality to some degree.
I have tried both export and save-as. Neither has done a good job.
The "Export" option re-compresses the data while the "Save As..." option only places the original data in an MOV file container. So if this output is "bad, bad, bad," then I suspect your source file(s) are not of high quality to begin with. (This seems to be confirmed by the very low audio sampling rate which implies the video data rate was probably also low to conserve file storage space.)
The internal information of the AVI movies are: (as reported by QT)... Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
The basic codecs here appear to be both playback and conversion compatitible with QT (other than the very low sampling rate which some QT apps may not like). Thus, if your work flow is to simply burn DVDs that can be played on commercial players, the AVI could most likely be dropped to iDVD for authoring. On the other hand, if you are editing in a recent version of iMovie, then that app may not like the AVI file container. In this case, the best quality you can likely expect would be to use the "Save As..." option to place the data in an MOV file container and import to iMovie.
Unfortunately, editing in iMovie '08/'09/'11 is done "by reference" which means your output file will be created by exporting the impoted source data to another compression format. The default would be H.264/AAC which is a highly compressed format which in turn would be re-compressed again by iDVD to multiplexed MPEG2/PCM content further reducing quality by using a less efficient video codec. My recommendation for export from iMovie in this case would be AIC/Linear PCM. (I.e., to export your edits to the Apple intermediat video codec using the original file size and frame rate with just a bit of "sharpening" and using 16-bit/48 kHz Linear PCM audio (which is what will be used to create the DVD).
Should I be using a better application then QuickTime?
How much are you willing to spend?
Is there a way to just use iDVD with the original AVI movies?
Yes. Simply create a new SD project, select your theme, drop the compatible AVI content to the appropriate "drop" area(s), add photos as desired, preview the results, and author the DVD if/when satisfied.

What export options in Quicktime Pro or Final Cut Pro should I select to export HDV video in .MOV files to highest quality Windows-compatible files?

I have some HDV video files imported through iMovie to .MOV files with Apple Intermediate Codec.
I need to convert these to Windows compatible video files of the highest possible ( least loss) quality. What export options in Final Cut Pro or in Quicktime Pro should I select? The codex in the converted files must not be Apple Intermediate Codec, for which there is no Windows version.

Okay, I read the whole Flip4Mac website.
Flip4Mac is an application for Apple computers.
Perhaps my question was unclear. When I posed it I was thinking of asking somebody with an Apple shop to do the conversion for me, and wanted advice on settings for his QUicktime Pro /Final Cut Pro that would produce the highest quality Windows -compatible files.
The Windows version of Quicktime will not play Quicktime files with Apple Intermediate Codec. You get black screen video, although the audio does come through.
So here's what I need: I need a Windows application that will transcode Quicktime files in Apple Intermediate Codec, with no loss or very little loss, to WIndows-compatible files. All Windows, all the time. Thank you.

Trying to export movie from QuickTime Pro to AVI and getting white screen

Hi there,
I am trying to export a movie from QuickTime Pro to an an AVI file. It goes through the process as if everything has worked, but when I open the finished file, all I get is a white screen with no audio or picture.
I need to save lectures from school from the school website to my computer so that I can watch them when I do not have internet access. QuickTime gives me the option to save the video straight from the web, but as soon as I turn off my AirPort it tells me that I need internet to continue watching the movie..
I need some way to get the files to my computer. Any suggestions?

I am trying to export a movie from QuickTime Pro to an an AVI file
AVI is just a container ... specifically, which codec are you using when exporting? And why export to AVI?
QuickTime gives me the option to save the video straight from the web, but as soon as I turn off my AirPort it tells me that I need internet to continue watching the movie
That usually means that your system doesn't have the codec installed needed to view the video, but your web browser is using a plugin that does. What format are the web videos? Flash?
-DH

Lose sound when exporting MPEG with QuickTime to iPod format

I paid the $30 to be upgrade to QuickTime Pro in the hopes that I would be able to export MPEGs from my digital camera for viewing in iPods. The video comes out fine but there is no sound. Any suggestions regarding how to get the sound to export too?

Thanks; the discussion is helpful.
When I downloaded the MPEG Streamclip software from http://www.squared5.com/; the conversion process was agonizingly slow. As an example, a single 6 minute Quicktime movie took hours to convert. After it was converted, then it not was recognizable by iTunes. So, MPEG Streamclip has not worked for me.
This seems like such a straightforward process that Apple would support. Basically, you can create iPhoto albums that synchronize with iPods; however you CAN NOT create Slideshows that synchronize with iPods. This is so frustrating since the slideshows have much more functionality and presumably would be what most people would find most useful. The process to get a slideshow to the iPod requires you to go through Quicktime and then Quicktime to ipod; this process only occassionally seems to work.
Anyway, Quicktime Pro, the $30 application, seems to sometimes work and sometimes not work for conversion of Quicktime files to iPods. I tried using non AAC protected audio files for the iPhoto slideshow sound and the conversion from Quicktime to iPod worked. In other cases, the conversion from Quicktime Pro to iPod did not work. I am at a loss to explain consistently what is happening when you use Quicktime to export to the iPod. When I open the Quicktime movie file the option to Export to iPod is grayed out. However, when I open the Quicktime application the option is black and available.

No audio when exporting to iMovie

I've been trying to take movies I made with our Sony digital camera, exporting them through quicktime to iMovie, but in changing the movie to MPEG4 it loses its audio and in fact, when I go to convert the from MPEG1 to MPEG4, the info window tells me "no audio track in source movie." (even though there is sound when played in quicktime).
I have looked through everything I can find, but I can't seem to find an answer. Are movies taken with a digital camera not sophisticated enough to be used in iMovie complete with the really great audio we were able to capture?
At this point, I'm thinking I need to give up on iMovie and just combine movies in quicktime pro. Can anyone please advise me before I go crazier than I already am?
Thanks..........
Beginner

I've been trying to take movies I made with our Sony digital camera, exporting them through quicktime to iMovie, but in changing the movie to MPEG4 it loses its audio and in fact, when I go to convert the from MPEG1 to MPEG4, the info window tells me "no audio track in source movie."
Multiplexed compression formats like MPEG-1 are not conversion compatible with the QT structure. Use an MPEG-based, third-party application like MPEG Streamclip (free) instead.

Problems with audio when exporting to movies

Hi All,
I teach sequencing and one of the projects is to score a short piece of music to film. Logic Pro 9 is great for this (though beat mapping isn't the most friendly of functions) and my students (most only 16-18 years old) have made some great projects.
Right the question is what are the best settings to use when exporting the audio to movie? Some students don't get any sound when bounced or some are getting the oprginal with the new audio (doubled).
To assess and store student work we use vimeo for video projects and the wierdest thing is that when uploaded these bounces (the ones that worked) have no sound at all.
Never had these issues with Logic 8 and just wondering if anyone has any ideas on how I can resolve this?
Thanks and happy new year.

I've used flip4mac for about a year and have had no problems with it. I mostly use it to export preview versions for windoze people. The quality is very good, though it takes significantly longer to export than a similar-quality quicktime movie.

No audio when exporting to h.264 (mp3 - aac conversion fails)

Using QuickTime Player Pro 7.5.5 on OS X 10.5.6:
I have a video file (video format: On2 VP6, audio format: MPEG Layer 3 mono) that I am attempting to export for high-quality YouTube.
When I export to H.264 my only audio export option is AAC-LC. But the resulting mp4 file has a silent audio track. I've tried different settings on the audio (mono/stereo, different data rates) but that makes no difference.
Is there a way to successfully export the audio when using the H.264 format?

Thanks -- it's too bad QuickTime Pro doesn't properly handle this. I successfully used iTunes as a workaround as well (I exported the audio track to a standalone mov, opened in iTunes, exported as an MP3, then added back to the video in QuickTime Pro).

No audio when exporting to 3gp ~ Quicktime Pro.

Similar Messages

Maybe you are looking for