No Audio when I capture (mac) but it's there when I play back???!!!

Hi all,
I've just got premiere for MAC and have a slight problem when I capture.
I can see the image, but no sound.
When I play back the captured piece, the audio is there, it's just a hassle having to capture a whole tape when I only need one sound bite.
Any ideas?

What camera are you Capturing from? What is your Project/Sequence Preset?
I also wonder if this is a Conforming issue, as you do end up with the Audio, once done. Conforming can take a bit of time, predicated on the power of one's computer, the Duration of the file and the Audio stream source.
Good luck,
Hunt

Similar Messages

I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out". No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?

You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

HT5148 i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear. how do i get my video to play clear.

i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?

Same reply.

TS3274 I don't hear audio when I play a video clip?

I don't hear audio when I play a video clip while on FB or in my email?

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

No audio when video played from internet

when i play videos on news media websites i get no audio.i have audio when i play mp3's and videos that go through itunes.....yes all the audio buttons & levels were checked and up....i think

Hi gbcamguy
You are in the wrong discussion forum, you should post your problem in the relevant OSX Tiger Discussion Forum. This is for OS9.
You will find more help and assistance there

I would like to keynote to ppt on mac but export not there in file. what should I do it?

     Hi, I would like to keynote to ppt slide on mac but export not there in file. Do you have a any idea, could you please to tell me. Thank you

Keynote 6;   File Export > Powerpoint
Keynote 5;   File Share > Powerpoint

When I play back a video from my iPad I have NO SOUND but sound/microphone works on EVERYTHING else such as YouTube, Netflix

When I play back a recent recorded video from my ipad I have NO SOUND. My Previous recordings have sound and so does YouTube, Netflix & apps. I've read & done majority suggestions posted for this problem with NO AVAIL Can someone PLEASE HELP?

Gammamum wrote:
I've read & done majority suggestions posted for this problem with NO AVAIL Can someone PLEASE HELP?
Since nobody here can possibly know what is included in "majority suggestions posted for this problem" then your next step would be a trip to an Apple Store and ask for their help.

I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise.

I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise. I have seen lots of old posts which go on about converting files but am wondering wherher at the current time with the latest versions of itunes and apple tv whether this should by now be a virtual play out of the box solution.
I have tried connecting my atv to the amp by optical cable but that didnt produce anything better and am assuming that a hdmi cable should be able to reproduce everything an optical cable does.
Is this something I should be able to achieve without having to recode the files?
Tracks are imported to itunes as apple lossless, have tried setting the atv audio settings to auto and 16 bit, neither works yet I was told some time ago by an apple rep that the atv shoud be able to handle any type of audio as it just passes it to the amp to decode. I am not stupid but not that technical when it comes to audio and bitrates etc so any explaination would be appreciated.
Thanks in advance for any help

Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven

As im recording videos on Photo Booth, my movements seem late. then when i play back the video, the sound comes in really late. how do i fix this?

theres like a 5 second delay from when i say something to when the sound of my voice actually comes in when i play back movies in photobooth.i tried restarting my computer and even turning on *auto flip new items. when i turn that on the problem is fixed for only one video. when i try to record the next one its back to the delay. is there anyway to trouble shoot this? or do i have to take my mac to the apple store. to top it all off ive only had my computer for 5 days. help please !!!!

I had the same problem since my moutain lion update, too.
I fixed it in the following way.
-Search for utilities on the HELP option on the top taskbar
- Go to utilities and open your audio-midi-setup.
- check your input and output properties
- Change input and output 44100khz and 16-BIT for both.(these are the most common properties)
my sound and video are not ouf sync in photo booth anymore.
let me know if it works for you!
cheers

I took some pictures and a movie on my iphone sync to iTune but it not there to see it back on the phone

I took some pictures and a movie on my iphone sync to iTune but it not there to see it back on the phone

Hello Bath668,
Thanks for using Apple Support Communities.
Please use the instructions in the following article to report a problem with the rental.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Take care,
Alex H.

HT201177 I am trying to create home movies and each time there is no sound when I play back the disc. The sound is there when I play back in imovie and also after I've shared with idvd and played back. Not sure what else to do???

I am trying to create home movies, and do not have sound on the final disc. The sound is there in imovie and after sharing to idvd. This has only happened a couple of times before and I have made a lot of movies. I have just gone through about 8 discs, all with no audio when I play them!!!

You need to ask for support in the iMovie forum.

When I play back newly burned disk the video is cut off on each side of the screen. It shows the entire display area in the pic window before i burn it.How can i fix this?

Idvd
when i play back the newly burned disc, the image on the tv set is cut off on each side.( there is still room on each side of the tv set for the image to show but it is as if the movie was cut about 2-3 inches off on each side) but not when i play it back on my computer?? Why is this and what can I do to fix it?

Also the tv set has wide and normal modes this does not change the loss of size. (I guess you can say it is cropped.)

What is wring when you play back movies and get no sound?

What do I have to do to get sound when I play back movies purchased from Itunes?

Refer to this article:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362

When i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place

when i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place it did before i turned the engine off

It could be that the CD player will only playback "Redbook" CD's from the previous position.
And starts mp3 type CD's from the beginnig.
However.. it's not Logic related.
pancenter-

Using the camera on my iPad 2, I can record videos, but can't get them to play back. I'd appreciate your help with this!

Using the camera on my iPad 2, I can record videos, but can't get them to play back. Can you help me with this? Thank you!

Previous version was a touch to change, this one is a slide to change.

No Audio when I capture (mac) but it's there when I play back???!!!

Similar Messages

Maybe you are looking for