No audio when importing from a .mov

Hello,
So to begin, the file i'm attempting to import and edit is a .mov with an H.264 codec.
I imported the file into fce and as with most of these media pieces I get, it had to be rendered prior to any editing being able to be done. Fine.
After the 15 minute rendering, no audio is playable/editable.
I attempted to open the file in quicktime to cross reference the file. Plays video, no audio.
Opened the file in Propresenter (our presentation software) and it plays both video AND audio.
What am I missing in quicktime that does not allow me to play / edit the .mov with any audio.
Thanks for any help you might have in this.
Kyle

h.264 is NOT an editing codec. It does not work properly in FCE. You need to convert h.264 files to AIC prior to importing into an FCE project. MPEG Streamclip (freeware) can handle the conversion.
-DH

Similar Messages

  • Losing audio when importing from QT, help please

    I have been unable to capture footage from a handycam to FCP HD, so I decided to capture in imove instead and then export the footage as QT files so I can import into FCP. Exporting is fine, and when I play the files in QT I get both audio and video, but when I import the same files into FCP I only get the video and the audio has disappeared.
    When I try to import the imovie dv clips, they play for a second and then the video stops but the audio continues. That's why I decided to convert them to QT.
    I have no idea how to fix this. I tried extracting the audio in imovie and exporting that way too, but same result.
    Any advice would be appreciated. Thanks!!
    (The whole reason for these problems is that I can't seem to capture in FCP. FCP recognizes the camera, but can't seem to control it. It is set on Firewire NTSC basic, and I've played around with different settings on that as well. The camera is set to VTR with AV/DV out on........can't figure out why it won't work.)
    Sorry for the long version.

    Personally i'd try to iron out the wrinkles in your fcp capture process.
    Is your camera on the approved devices list? If not, you might think about a new camera. if it's a sony, you ought to use firewire, not firewire basic as your device protocol.
    Can you play out to the camera?
    imovie captures a dv stream, not a mov and therein lies the problem with imovie files in fcp. but you ought to be getting unrendered audio (beeps until rendered) not no audio at all. Interesting.
    What exactly is the camera?

  • How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

    How can I keep tabs on the file size when importing from the Event Library into a Project? I want to ensure the movie will fit onto a 4.7Gb disc?

    iDVD does not care about file sizes, as it compresses the file to the standard DVD format of mpeg2.
    It only cares about length i.e. max 2 hours including titles etc.
    iDVD encoding settings:
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
    Short version:
    Best Performance is for videos of up to 60 minutes
    Best Quality is for videos of up to 120 minutes
    Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
    Professional Quality: The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned abo
    In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
    You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
    Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
    NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
    And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
    http://support.apple.com/kb/HT1502?viewlocale=en_US

  • How Can I Delete Originals I Don't Care to Keep When Importing From SD Card?

    Hi All,
    Just installed LR3 thanks to Santa. Have been going thru the video tutorials as well as the Lightroom_3_Help PDF and Lightroom-GettingStarted_Lo PDF but I can't figure out how to simply delete files from the gitgo when importing from SD Card or from my HDD (files already moved to HDD but not yet culled or imported into LR3). I was hoping I could, in LIBRARY, just r/c on a file that is plainly not worth keeping and just delete it so I dont have to do it later. Seems like I could, this way, be able to concentrate more on the shots requiring editing.
    Also, need suggestions as to how I should import my files using DNG, Copy, Move, or Add. First off, I am not a working pro but am an occasional serious amateur. I'm picky and I like things to look good the first time and I like options.  The pix already on my HDD are in the PICTURES folder; those imported from SD card get moved to that PICTURES folder. I have, in the past, moved the processed verssions to a different DESTINATION folder - now I still have the originals and I have processed copies to post and share.
    I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
    Thanks in advance,
    Phil in San Diego

    Phil,
    PhilipCWells wrote:
     I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
    The LR Exchange site has three plug-ins that allow you to keep a "mirror" copy of your DNG/RAW images in JPG format for use by others without having to go into LR and generate them when needed.  The link is:
    http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=tree&search_exchange=25&search _category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&start num=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=
    One of them should help you with this.
    Jeff (in San Diego as well)

  • How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

    I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro.  I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
    The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
    But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
    I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

    I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done.  Need to add Audition to the long list as well I suspect. Fun times!

  • No audio when importing AVCHD into FCP X?  Simple solution.

    After hours of trial and error and several phone calls to support, I figured out why my AVCHD footage (MTS files from a Canon vixia HF S100)  had no audio when importing into FCPX.  The solution was to simply uncheck the box - "Remove silent channels" - under Audio in the pop-up import window .  That did the trick. 
    I had tried  importing from a card reader, the camera and from an external hard drive and then tried 2 converter programs (MPEG streamclick and   Wondershare Video Conerter Ultimate.)
    Final Cut Pro X
    OS X 10.8.2

    It's usually something simple that can catch the best of us.
    Al

  • Dropped frames when importing from sony dcr-hc52

    hey all,
    i'm getting a lot of dropped frames when importing from my sony cdr-hc52. anyone had this experience? is there a setting i'm missing that would correct this?
    thanks in advance,
    filmgrrrl

    Hello kellyfromkenley, Depending on how you move the video or share the video from iMovie to iDVD it can make a big difference. One way is to go to the Share Menu > Share to iDVD. But the better is to Share to Media Browser instead. Try this:
    Go back to iMovie and open your Project in Project Library.
    Go to Share Menu > Share to Media Browser
    Choose the Large size and let it run until it finishes
    Quit iMovie and open iDVD.
    In iDVD click on the Media Button, then click on the Movies button and look for your project under the iMovie star icon in the Media Browser itself.
    Drag that project icon into the iDVD project window and burn another disk
    I think you'll see an increase in the visual quality using this method.
    The reason this has an effect on the visual quality is there's a whole different set of operations performed on the video when you first Share to Media Browser. The side effect of those changes in steps is a much better looking DVD from your iMovie project.

  • No audio when exporting from mpeg to flv

    We have two PCs with Premiere Pro and AME installed, and just upgraded to CC. On one computer exporting works fine, on the other one, I'm losing the audio when exporting from mpeg to flv. I have used the same preset as on the other computer (that works) and also tried other presets that came with AME.
    I can't figure out why this wouldn't work on one but works fine on the other? Anyone who knows?

    How are you determining that the FLV has no audio?  Are you playing it back in VLC Player or importing it into Flash?
    Also, do you see a full range of formats on the system where you don't hear audio?  If some formats are missing this might be  a licensing issue.  Also check if AME recognizes audio on the MPEG source (hover over it  in the queue and look for  audio info in the tool tip).

  • No audio when importing footage under capture

    When I'm importing footage from my camcorder into FCE there is audio in the caputure window & no levels on my audio meters. The camcorder I'm using is a ZR500 Mini DV using to import.
    These are the steps I have done: File -> Easy Setup then Format: -> (all formats)
    after that Use: DV-NTSC Firewire Basic.
    Then I went to File Capture. Any advice? I'm getting no audio when importing on
    FCE 4?

    Welcome aboard idw3,
    Then I went to File Capture. Any advice? I'm getting no audio when importing on
    FCE 4?
    That's normal for FCE. All versions have been the same. If you need to hear the audio use the cameras headphone socket if it has one.
    All audio can be adjusted in the Timeline during editing as required.
    Al

  • Overly Huge Files when Importing from DVC tape to IMovie

    When importing from my Canon ZR 600 60 minutes of tape equals 16.1 Gigs
    I am looking for what I am doing wrong I have 10 hours of Disney I would like to turn into 5 dvd set not 15 dvd set. Any help would be greatly appreciated.

    Hi Gregory
    About 13-14 Gb per hour miniDV tape movie is as iMovie (QT) works. When
    it is stored down to a DVD disk it will be converted into a working format for
    DVD disks and that will mean that 1 hour will take up a DVD disk in max
    quality and 2 hours in slightly less quality. iDVD doesn't care about how
    many Gb Your movie takes up in iMovie or FinalCut JUST the amount of minutes
    this includes the DVD menues that also need spaces.
    55 min movie and 5 min for menues is OK in max qual.
    115 min + 5 for slightly less.
    You also need to think about how much free space there is on Your hard disk.
    After Your 115 min movie is ready to go to iDVD there should be about 20Gb
    free space left or iDVD will run into problems.
    Yours Bengt W

  • TS1702 Iphone 4s io6.1 no audio when playing music and movies

    Iphone 4s io6.1 no audio when playing music and movies?

    Clean the dock connector and headphone jack.  Lint or debris in either of this could cause this issue.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these steps in order until the issue is resolved.

  • When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

    When importing from camera into aperture, photo's are also copied to my desktop, if i delete from desktop i am unable to edit photo in aperture. Must have done something, but what?

    Have a look at your import setting specifically Store Files:
    Make sure it is set to where you want the originals to go.
    Message was edited by: Frank Caggiano - Don;t empty the system trash. The originals that you deleted from the Desktop are in there and are the only copies you have unless they are still in the camera.

  • When importing from a Word document placing the text in InDesign

    When importing from a Word document placing the text in InDesign I can only see the text from the first page of the Word document. I have increased the number of pages in the Indesign document to more than what is in the Word document, still only text from the first page is shown. What am I doing wrong or did I not set a setting correctly?

    When you want to auto flow text while placing, hold down the Shift key when clicking with the Place cursor on the first page. New pages will be generated and text will be auto flowed using the margins set up on the master page.

  • When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

    When importing from my camera or file in Lightroom 5 my pictures are over-exposed by 1-2 stops, while they are well exposed on the camera-screen. How to get the 'right-exposed pictures on the screen?

    There is an option in your Lightroom preferences on the General tab, "Treat JPEG files next to raw files as separate images". If you have that option checked then Lightroom will import and display both your raw and JPEG files. Are you using active D-lighting on your camera? If you are then you need to turn off that feature.

  • Photos sent to file on desktop when importing from memory card

    The photos sent to a file when importing from a memory card appear in the file as Adobe documents and cannot be opened.  If I try to open a message appears 'Adobe Reader cannot open this document as it is not a supported file/
    What has gone wrong?

    You have already opened a thread on this issue, we don't need a second thread on the same issue.

Maybe you are looking for

  • ACS 5.3 - how to join to domain

    Hello, can anybody clarify me how it is possible join ACS 5.3 to windows domain? from cisco doc: Active Directory Domain Name: Name of the AD domain to join ACS to. Username: Predefined user in AD. AD account required for domain access in ACS should

  • MSI Eclipse Plus Motherboard Featuring NF200 Chip is it worth the it????

    Well MSI have launched there i7 with NF200 support according to some uk sites and the price is like ouch ouch and ouch again £350ish. Also it seems from some reports on the NF200 it slower that the X58 without the chip so is it really worth the money

  • How can I get the PDF to retain margins set in Word document?

    Uploaded a Word 2003 document for conversion. Conversion to PDF successful, but the PDF has different margins and page breaks. How do I get the PDF to retain the set margins?

  • Dumbest Question Ever

    Ok, I have Garageband 1.1.0 on my computer...I want to have the latest version, but when I tried to install the latest (3.0.4), the old comp-tor said: GarageBand_304 cannot be installed on this computer. An eligible GarageBand application was not fou

  • Bug rendering legend

    Hi All, When the last legend entry has a dashed line style the legend line style itself will also be dashed instead of solid. Does any body know a workaround? Thanks, Jeroen