No Audio when playing DVD in player

Hello,
I have created a movie with iMovie and used iDVD to write the content to a DVD. I used one the themes with only one button to play the movie. Everything works great in iDVD preview, however after burning the DVD successfully and load it into the player, the audio (menu and movie) does not play. The video works great, but no audio. I'm using a DVDRW and a fairly new DVD player. What am I doing wrong?
Thanks in advance,
Guillermo

I'm using a DVDRW and a fairly new DVD player. What am I doing wrong?
A lot of set top DVD players don't like RW media.

Similar Messages

  • No Audio when playing DVD's backed up on mac through Front Row

    I have backed up my DVD library to an external hard drive and created an alias so that I can access them through front row. When I play them in the DVD player I have no problems, but when I play them in Front Row, I don't get any audio. Has anyone experienced this before?

    Unfortunately, it's against the Terms of Use to post about "ripping" DVDs. It may be legal in your location, but in the United States (where these forums are hosted) it's illegal so you can't post about it. My advice, would be to post your topic again, including the exact details about the files you've saved (what video format they are) but skip the part about them coming from DVDs... If you've saved some VIDEO_TS folders, this may be a little more complicated, but you could say they were your own DVDs from iDVD. This topic will probably be deleted since it violates the ToU.
    -Doug

  • No sound when playing DVDs, yet fine with bluray

    my sony bluray does not have sound when playing dvds. it acts fine when using blu ray. any suggestions?

    Hello jc1942_69, thank you for your message. Welcome to SONY Community!
    For further assistance, please let us know with the model number of your Blu-ray disc player. As alternative, you can check the link below: http://esupport.sony.com/US/p/support-info.pl?info_id=264
    However, to troubleshoot your Blu-ray disc player in a general way. Follow the steps below:
    1. Turn the Blu-ray Disc player on and make sure the correct video input is selected on the TV.
    2. Press the Home button on the Blu-ray Disc player remote.
    3. Once the menu is displayed, press the Left arrow button on the remote and navigate to Setup.
    4. On Setup, use the Down arrow button and go to Resetting and press the Enter button.
    5. Under Resetting, select either Reset to Factory Default Settings or Initialize Personal Information.
    NOTES:
    Reset to Factory Default Settings option will display another menu where you can reset the current network, audio and video settings on the player, select All Settings if you desire to restore everything.
    Initialize Personal Information will erase all personal information stored on the player and some Internet apps.
    6. Go through each of the two options if you desire to completely restore the Blu-ray Disc player.
    Hopefully this post helps you! 

  • ITunes 7.6 No Audio When Playing a Music Video or Movie

    I just installed iTunes 7.6.0.29 (It was released today).
    There is no audio when playing a music video or a movie that I've purchased. Movie trailers and music videos in the iTunes store have no audio either. Videos from iTunes University that I've downloaded (such as an MIT lecture) play fine w/ audio.
    Music audio (such as tracks I've purchased or tracks on the iTunes store) play fine.
    QuickTime videos, such as a QT video on my desktop play fine. Windows Media Player works fine too.
    So, why don't music videos and movies play (w/audio) on iTunes 7.6??

    I'm experiencing what appears to be the exact same issue. I just installed iTunes 7.6.
    Video but no audio:
    Purchased iTunes TV episodes
    Streamed video trailers in the iTunes Store
    Works fine:
    All music files, including protected files purchased through iTunes
    The standalone Quicktime player performs normally with MOV files. Windows Media Player still performs normally.
    I found an old support doc complaining of a similar issue with a previous iTunes release and tried the suggested fix: Uninstalling Quicktime and reinstalling it using the standalone installer (Quicktime 7.4). I also reinstalled iTunes. Neither solved the issue.
    I'm very disappointed that I can no longer access the files I've purchased. I hope this is fixed very soon.

  • Satellite 1100-Z14: I get the only picture but no sound when playing DVD's

    I know mine is a fairly old notebook,but despite updating with latest firmware, I have an intermittent problem when playing DVD's (Reg 2) in that I get the picture but no sound, particularly with some older DVD's.
    CD's are ok.
    Toshiba repair agent says it is a software problem and they only deal with hardware problems.
    Can anyone tell me how I can deal with this problem please ? ( apart from getting a later model ! )

    I think I may have stumbled on the problem, I use IntervideoDVD7 and under audio effects there is an option
    'Sydney Theatre' etc, I changed it to 'off' and the sound cames back. maybe I should study their manual a bit more !

  • When playing dvds on my Macbook my TV states "mode not supported"  Any ideas?

    When playing DVD's on my Macbook my TV states "mode not supported". Any ideas?

    The DVD may be in PAL TV format and not compatible with North America, Japan, parts of South America and Asian equipment which is NTSC. PAL is compatible with Europe, Asia and parts of South America.

  • TS1702 Iphone 4s io6.1 no audio when playing music and movies

    Iphone 4s io6.1 no audio when playing music and movies?

    Clean the dock connector and headphone jack.  Lint or debris in either of this could cause this issue.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these steps in order until the issue is resolved.

  • No audio when playing music and videos

    need help on my iphone 4s...no audio when playing music or watching videos...no volume display and volume buttons dont function...

    Clean the dock connector and headphone jack.  Lint or debris in either of this could cause this issue.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these steps in order until the issue is resolved.

  • No audio when playing videos

    Upon downloading the latest update, I have for some reason, no audio
    when playing back a video...any of them. Video is there, but no sound.
    Thanks

    I had the exact same issue on my Home computer with XP Home sp2--No audio in itunes
    However, my work computer with XP Pro sp2 works fine with the updates.
    I ended up taking the advice of some others on here and reinstalled the old version of Quick Time (7.3.1) which worked...Although I'm unable to see movie trailers with the old version...But all other videos, including the one movie that I purchased, I'm able to hear...

  • IDVD won't play on Bose DVD, little volume when played on another player

    I just finished an iDVD, using two movies created in Photo-to-Movie and iMovie, and another just in iMovie, with some video I shot. I placed all three movies onto a DVD.
    The movie plays great on my Sony DVD player, although volume is pretty loud, compared to commercial DVDs. It plays great on my iMac and a PC.
    On the Bose system I have, a 1-2-3 model (AV-18), the DVD player does not recognize the format at all. When played in another DVD player (Oppo) I have hooked up to the Bose for sound, I can barely hear sound, even when set to top volume. Commercial movies played either on the Oppo or Bose are fine.
    Is this just one of the many pain-in-the-rear dysfunctions of a Bose system, or should I figure out a way to use another format when use iMovie/iDVD to create a movie?

    Commercial DVDs are pressed, not burned, so they are 'read' differently by DVD players.
    I know that burned DVD disks can play differently in different DVD players. Mine always play great on my Sonys, but not always on my Toshiba. The Toshiba seems to read the audio tracks in reverse, making the audio louder where I have decreased it and vice versa.
    I have not tried my DVDs on Bose or Oppo players, so I don't know if the problem is more specific to them.
    Be sure you are using a quality brand of DVD disk; Verbatim, Maxell and Taiyo Yuden are recommended here. Memorex and TDK are not. Apparently their disk layers are thinner making burns inconsistent.
    If you burned a DVD +R disk, you might want to try it on a DVD-R disk. Also, choose a slow burn speed.
    I always use Verbatim archival gold disks DVD-R, burn at a speed of 4x or less.

  • A small logo of Dolby Digital or DVD-Audio missing when play DVD-A or DVD software with SPDIF

    I can see these logo before when I play DVD-A or play DVD movies with SPDIF enabled on DVD software such as PowerDVD. And now it's gone, when play SPDIF, it does not show these logos at all.
    I appreciate any advises.
    Thanks

    for the logos, someone asked how to know what kind of signal his card was decoding. I provided 2 examples:
    http://shingoyab.free.fr/creative/dolby.jpg
    http://shingoyab.free.fr/creative/dts.jpg
    if you don't see them but hear correct surround sound, don't bother. On some situation (not determined which one though) the logo disapears. I lost them some rare times. Last times was when listening to some DD music when programming small homeworks in OpenGL.

  • Ghosting when playing DVDs

    Hi, using RX2600XT diamond and connecting to my LCD TV via vga. When I play some DVDs, especially dark scenes and fast movement, I see trails and ghosting. I see the previous scene for about few seconds on the screen and if there is arm movenet, you see the arm trail as a shadow.
    These DVDs play fine on my regular DVD player and using the same DVD.
    Any idea what is going on or what I need to fix this?
    Thanks

    What DVD software/codec are you using to play DVDs?

  • No sound w/ WMP when playing DVDs

    The picture looks fine and I have sound when playing music, video & Flash files. Also I have two drives and no sound on either of them and i have tried several different DVDs

    Hi rbfeik,
    Did you by chance upgrade from Vista to Win 7?
    If so, did the DVD player work prior to upgrading?
    Did you upgrade using the HP Upgrade Assistant?
    I'm thinking you need to install a Win 7 version of your DVD software.
    Here is the Win 7 64bit software and drivers page for your PC:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3813...
    Look for DVD related software and drivers.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • No audio when playing m4v file

    I have a new laptop (HP Pavilion), downloaded the latest iTunes and QuickTime, and music files play fine. Trouble is that the TV shows I've purchased via iTunes have no audio. The video works great, but zero sound. I've uninstalled an re-installed iTunes, rebooted, etc. I'm running XP Pro. Sound card is fine as Windows Media Player plays ok.
    I saw a post about this from last summer, but no resolution. Anyone have any ideas?
    thanks

    I'm having a similar issue. When I play an m4v file, my computer freezes to the point I have to do a hard reboot. Yet if I go into services and stop the Windows Audio service, the m4v video plays fine without sound. All my other audio files play fine. It's very frustrating because I can't go to an earlier version to troubleshoot since my libraries are 7.2. If anyone knows of a fix, please let me know.
    I have a new laptop (HP Pavilion), downloaded the
    latest iTunes and QuickTime, and music files play
    fine. Trouble is that the TV shows I've purchased via
    iTunes have no audio. The video works great, but zero
    sound. I've uninstalled an re-installed iTunes,
    rebooted, etc. I'm running XP Pro. Sound card is fine
    as Windows Media Player plays ok.
    I saw a post about this from last summer, but no
    resolution. Anyone have any ideas?
    thanks

  • Latest issue: No audio when playing video

    Hello-I rolled back to version 6 and for the most part, everything is working normal again,however, there is no audio when I play video (I can hear music files).
    I have tried the suggested fixes in the FAQ with no luck. I noticed that if I switch to 44.1/16bit in Quicktime preferences, I can get audio but it is stuttered.
    If I go to 48/24bit, there is no audio w/ video.
    Suggestions anyone?
    thanks.

    Is this only a problem with the sound and does the video work?
    *http://helpx.adobe.com/flash-player/kb/common-problems-flash-player.html
    *http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
    *http://helpx.adobe.com/flash-player/kb/no-video-display-flash-player.html
    You can check for problems caused by a recent Flash 11.3 update and possibly downgrade to Flash 11.2 or 10.3.
    *https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
    *https://support.mozilla.org/kb/flash-113-crashes
    *http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html

Maybe you are looking for

  • Handling single quote

    I have a custom function in which I want to parse out any single quotes as they are causing problems further down in our process. Actually what I want the function to do is to find the first single quote, if it exists, then strip the single quote and

  • Opening Excel sheet from server

    Hi I have one requirement to open Excel Sheet. The Excel sheet is residing in a directory parallel to WEB-INF. I am using Jboss server in Linux. in UI whenever I click on link I have to open Excel sheet from the server. Before opening Excel sheet I h

  • My Creative Could isn't coming up

    I have it installed but when I click on it it wont come up. I've tried to troubleshoot it but that doesn't do anything.If your wondering when I try to lunch it nothing no sign of it popping up comes. now I haven't tried uninstalling it but if there i

  • Recording to Ipod through Input?

    I have a bullet camera with a 3.5mm input that says it will record to many personal media players. I heard that the new 5th G ipods will record sound, how about video? Anyone know how to, or even if its possible to record from a camera directly to an

  • Changing Color Of Console Cursor

    I've searched for about five hours trying to uncover the method of changing the color of the console cursor in Linux. Specifically I'm not trying to change the color of the cursor in terminals, I know how to do that, but I don't know how change them