No Audio when playing DVD's backed up on mac through Front Row

I have backed up my DVD library to an external hard drive and created an alias so that I can access them through front row. When I play them in the DVD player I have no problems, but when I play them in Front Row, I don't get any audio. Has anyone experienced this before?

Unfortunately, it's against the Terms of Use to post about "ripping" DVDs. It may be legal in your location, but in the United States (where these forums are hosted) it's illegal so you can't post about it. My advice, would be to post your topic again, including the exact details about the files you've saved (what video format they are) but skip the part about them coming from DVDs... If you've saved some VIDEO_TS folders, this may be a little more complicated, but you could say they were your own DVDs from iDVD. This topic will probably be deleted since it violates the ToU.
-Doug

Similar Messages

  • No Audio when playing DVD in player

    Hello,
    I have created a movie with iMovie and used iDVD to write the content to a DVD. I used one the themes with only one button to play the movie. Everything works great in iDVD preview, however after burning the DVD successfully and load it into the player, the audio (menu and movie) does not play. The video works great, but no audio. I'm using a DVDRW and a fairly new DVD player. What am I doing wrong?
    Thanks in advance,
    Guillermo

    I'm using a DVDRW and a fairly new DVD player. What am I doing wrong?
    A lot of set top DVD players don't like RW media.

  • Satellite 1100-Z14: I get the only picture but no sound when playing DVD's

    I know mine is a fairly old notebook,but despite updating with latest firmware, I have an intermittent problem when playing DVD's (Reg 2) in that I get the picture but no sound, particularly with some older DVD's.
    CD's are ok.
    Toshiba repair agent says it is a software problem and they only deal with hardware problems.
    Can anyone tell me how I can deal with this problem please ? ( apart from getting a later model ! )

    I think I may have stumbled on the problem, I use IntervideoDVD7 and under audio effects there is an option
    'Sydney Theatre' etc, I changed it to 'off' and the sound cames back. maybe I should study their manual a bit more !

  • No sound when playing DVDs, yet fine with bluray

    my sony bluray does not have sound when playing dvds. it acts fine when using blu ray. any suggestions?

    Hello jc1942_69, thank you for your message. Welcome to SONY Community!
    For further assistance, please let us know with the model number of your Blu-ray disc player. As alternative, you can check the link below: http://esupport.sony.com/US/p/support-info.pl?info_id=264
    However, to troubleshoot your Blu-ray disc player in a general way. Follow the steps below:
    1. Turn the Blu-ray Disc player on and make sure the correct video input is selected on the TV.
    2. Press the Home button on the Blu-ray Disc player remote.
    3. Once the menu is displayed, press the Left arrow button on the remote and navigate to Setup.
    4. On Setup, use the Down arrow button and go to Resetting and press the Enter button.
    5. Under Resetting, select either Reset to Factory Default Settings or Initialize Personal Information.
    NOTES:
    Reset to Factory Default Settings option will display another menu where you can reset the current network, audio and video settings on the player, select All Settings if you desire to restore everything.
    Initialize Personal Information will erase all personal information stored on the player and some Internet apps.
    6. Go through each of the two options if you desire to completely restore the Blu-ray Disc player.
    Hopefully this post helps you! 

  • No audio when playing videos

    Upon downloading the latest update, I have for some reason, no audio
    when playing back a video...any of them. Video is there, but no sound.
    Thanks

    I had the exact same issue on my Home computer with XP Home sp2--No audio in itunes
    However, my work computer with XP Pro sp2 works fine with the updates.
    I ended up taking the advice of some others on here and reinstalled the old version of Quick Time (7.3.1) which worked...Although I'm unable to see movie trailers with the old version...But all other videos, including the one movie that I purchased, I'm able to hear...

  • ITunes 7.6 No Audio When Playing a Music Video or Movie

    I just installed iTunes 7.6.0.29 (It was released today).
    There is no audio when playing a music video or a movie that I've purchased. Movie trailers and music videos in the iTunes store have no audio either. Videos from iTunes University that I've downloaded (such as an MIT lecture) play fine w/ audio.
    Music audio (such as tracks I've purchased or tracks on the iTunes store) play fine.
    QuickTime videos, such as a QT video on my desktop play fine. Windows Media Player works fine too.
    So, why don't music videos and movies play (w/audio) on iTunes 7.6??

    I'm experiencing what appears to be the exact same issue. I just installed iTunes 7.6.
    Video but no audio:
    Purchased iTunes TV episodes
    Streamed video trailers in the iTunes Store
    Works fine:
    All music files, including protected files purchased through iTunes
    The standalone Quicktime player performs normally with MOV files. Windows Media Player still performs normally.
    I found an old support doc complaining of a similar issue with a previous iTunes release and tried the suggested fix: Uninstalling Quicktime and reinstalling it using the standalone installer (Quicktime 7.4). I also reinstalled iTunes. Neither solved the issue.
    I'm very disappointed that I can no longer access the files I've purchased. I hope this is fixed very soon.

  • When playing dvds on my Macbook my TV states "mode not supported"  Any ideas?

    When playing DVD's on my Macbook my TV states "mode not supported". Any ideas?

    The DVD may be in PAL TV format and not compatible with North America, Japan, parts of South America and Asian equipment which is NTSC. PAL is compatible with Europe, Asia and parts of South America.

  • TS1702 Iphone 4s io6.1 no audio when playing music and movies

    Iphone 4s io6.1 no audio when playing music and movies?

    Clean the dock connector and headphone jack.  Lint or debris in either of this could cause this issue.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these steps in order until the issue is resolved.

  • No audio when playing music and videos

    need help on my iphone 4s...no audio when playing music or watching videos...no volume display and volume buttons dont function...

    Clean the dock connector and headphone jack.  Lint or debris in either of this could cause this issue.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these steps in order until the issue is resolved.

  • HT4907 Password Issue when attempting to enable Back to My Mac in iCloud Preferences - HELP?

    Since upgrading to Mountain Lion, I have a problem enabling Back to My Mac. When I try and enable B2MM in the iCloud preferences window, I am asked to enter my Apple ID password. It says the password is incorrect, even though it IS 100% correct. I've even tried resetting my password (so that the password lives up to the latest security requirements for passwords, etc). So, it's definitely correct, and I'm able to login to my Apple account here (on this Apple laptop as well as on my iPad and iPhone)... it's not an issue when I log in anywhere else... I am only told my password is incorrect when attempting to enable Back to My Mac in the iCloud preferences pane.
    Help?
    Many thanks!

    Do these make installation of memeo superfluous? Would I need memeo for daily back up?
    From what I gather, you couldn't pay me to use Memeo, nor actually a Seagate enclosure, nor many USB only drives, (USB is not bootable on PPC Macs).
    I've used maybe a few dozen backup Apps on the Mac, and I'd personally judge only Apple's Time Machine worse than that one.
    If you had it to do all over again, you'd get a case with Firewire, one with an Oxford chipset, not containing a Green Drive, not a Seagate Drive, not less than 7200 RPM drive, & a 32MB Cache, not with a One-Button touch feature, ( not a Bus powered drive like...
    http://eshop.macsales.com/item/Newer%20Technology/MS3S7W20TB32/
    http://eshop.macsales.com/item/Other%20World%20Computing/ME8QW7W20TB/
    I searched hard for answers , not aware of this devoted community. What a wonderful discovery.
    Great to hear & that you found us, tons of devoted, unselfish helpers here too!
    So where are we now on the Drive?
    Does it show up in Disk Utility? Can you repair it there?

  • Since last update (today) I get invalid password when trying to use back to my MAC, password works everywhere else

    since last update (today) I get invalid Apple ID password when trying to use back to my MAC in Icloud app on my MAC, password works on all my other devices. GLITCH ?

    Try going to the Apple ID page on your web browser
    http://www.apple.com/support/appleid/
    and try to either retrieve or reset your password
    (obviously you had to be able to successfully log in to be able to post here)
    I was finally able to log in through my system preferences after about three or four hours. I ran a disk utility to repair permissions and restarted and it seemed to work ok.

  • 2010 Mac Mini, Front Row and 5.1 Audio

    I recently bought one of the new 2010 Mac mini's for my home theater. I have video going to my TV through HDMI. (I do not use the TV for audio.) I'm feeding audio to my receiver via optical. The problem I'm having is with 5.1 audio through Front Row. I've installed Perian and enabled AC3 passthrough. 5.1 audio works great when I play a video in iTunes (it also works with eyeTV). When I try to play the same movies through Front Row, I'm stuck with stereo audio and see no way to change it. Any ideas?
    Thanks in advance!

    I too have the latest mini, hooked up to a Denon receiver via pass-through HDMI.
    I am not an audiophile in terms of setting up this stuff and just want to know what I need to do to get the optimum performance out of this mini, audio wise.
    When I go to Audio MIDI Setup app, my receiver (DENON-AVAMP) is listed next to the "source" button. I have no clue about channels, bits, etc. When I click on the "Configure Speakers" button I am presented with different configurations so I selected "Multichannel" versus "Stereo". And I can see where you can test all 5 speakers and subwoofer, but I just don't know which "format" I am supposed to select.
    The 5.1 mapping is shown when I select 8 channel/16 bit, 8 channel/20 bit, or 8 channel 24 bit. I can click on each speaker in this map and it tests properly no matter which one of the above combinations I select. Just not sure which one I am supposed to be using.
    All I know is my Denon is a 5.1 system and all this works perfectly (getting 5.1 sound) with my Playstation 3 hooked up the same way to the Denon.
    Does anybody know the correct settings to output 5.1 sound from this Mac Mini?
    Thanks guys!

  • HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini.  So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

    I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini.  So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

    Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
    As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
    Did you use any third party software to move your Firefox data from internal memory to the storage card?

  • Playing iMovieHD6 projects through Front Row

    I've been using Front Row on various Macs as a handy way to show old home movies saved in iMovieHD6 from original VHS tapes, mini-DV tapes and HD mini-DV tapes. All has been going really well, using an alias on the Mac in question and storing hundreds of GBs of movies as original iMovieProjects with all their clips. It works brilliantly.
    However, now moving into more recent tapes with letterbox proportions, these are not always playing in the right frame size on Front Row. So I'm getting the squashed body effect. Does anyone know how to adjust Front Row's frame proportions? Or how I adjust my movie clips (which play perfectly in iMovieHD) so they play correctly through Front Row? And in case anyone's wondering why I'm not saving the clips to a single big .dv file or some other compressed format, it's so that I can go back to them and edit or extract material at a later date.
    All suggestions would be really welcomed. I'm pretty new to all this.
    Many thanks,
    Richard

    thanks a ton - all working nicely now. Its pretty common sense but being new to a Mac, theres alot of new menu options to get used to.

  • Impoting video but no audio when played back.

    Never had trouble with IMovie before until now.
    Trying to transfer home videos from a regular dvd.
    When I play the clips, I get the video but no audio. If I open up another window (could be anything outside IMovie) I get the audio.
    If I switch back to the IMovie window, no audio. I have my dvd player connected to a converter because I have an 8mm camcorder. Also, whenever I switch from edit mode to camera mode, IMovie crashes (sometimes). My converter is a Canopus ADV 110.

    Try downloading the free program MPEG Streamclip. (Just Google it.) Drag your clip into the window of Streamclip, pull down the Streamclip File menu, and click on Convert to aiff, or something like that.
    Likely your problem is that your clip contains an audio format or mixed material that is incompatible with iMovie. That's why it plays elsewhere but not in iMovie. Streamclip should be able to convert it to an aiff file, which works well with iMovie.

Maybe you are looking for

  • Is it possible to transfer all files from one Apple ID to another

    Hello, For work I currently use an iPad Air (iOS 8.1.3) and just recently upgraded to a MacBook Pro (OS X 10.10.2) . The only issue is that I will be using a different Apple ID on the MacBook then I was using on the iPad. My question is, is it possib

  • I can t get any sound notication sounds on my ipad 2 such as new email etc

    I can t get any sound notication sounds on my ipad 2 such as new email etc

  • How to clean the plex?

    How to clean the plex?

  • Who locks row in IOT?

    Hi, I have an index organized table (IOT) where I need to find the locking session for as certain row. I found usefull information on this website: http://www.orafaq.com/node/854 But for some reason I annot use <tt>DBMS_ROWID.rowid_create</tt> to cal

  • Transaction SWO1 in production

    Hi, We have a developer requesting transaction SWO1 in production. The only roles with this transaction with users currently assigned are BASIS roles. We use custom roles only, no SAP roles. Our concern is the change/create functionality of this tran