No audio when playing .mov files, codec missing?? Please HELP!

Hey everyone, i recently exported a movie in submerge (a softWARE THAT lets u put subtitles into movies), i can watch it just fine in my computer, but when i put it in another, mac, i get the video but no audio... Im i missing a codec? i just downloaded the Xvid codec, but nothing, still no audio. What can i do? please help!!

Load the movie into QuickTime Player, open the Movie Inspector (Window menu), and look at the Format section. That will show the codecs used for the video and audio, the audio being the second one listed. Post that information here and someone can probably tell you what you'll need.
Regards.

Similar Messages

  • No audio when playing mov files in WinXp SP2

    My quicktime 7.1 will not play any sound and Freezes up.
    I've set audio to safemode and video to to safemode,
    still no audin in playback.

    My Quicktime movies didn't freeze although I had
    NO Sound with Quicktime's movies made with our camera.
    solution:
    Open your Quicktime movie.
    Click; Edit
    Click; Preferences
    Click; Quicktime Preferences
    Click; Audio
    under Devices Click; Select Audio Playback and Recording Devices
    under Sound playback Click; Advanced
    under Speaker setup Click; Quadraphonic or the, stereo speaker choices
    (do not pick any of the Suround Sounds, 5.1, 7.1, or no speakers)
    You must close your Quicktime movie to reset it.
    Open the same movie or another one that wasn't working and listen for sound.
    If still no sound, follow this list back to Speaker setup and put it back where it was.

  • My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

    My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

    Hi there,
    Can you please share your Captivate version?(Help>About Adobe Captivate)
    Thanks,
    Nimmy Sukumaran.

  • No video but sound when playing .mov files

    I'm trying to play .mov files on my computer and I get sound but no video. I've installed the latest verson of QT and no help.
    The computer is an older MBP.
    randalhillphoto

    I should explain better. The mov files are exports from a 2-year-old MBP using FCP and exporting the files as self-contained movies. They were exported to use as an archive and saved on DVDs. Now I'm working on a 4 year-old MBP with FCE and trying to open the files with quicktime after downloading them from the DVD archives. I get the sound but no video. Please help me resolve this.

  • Premiere CS5 not importing .mov files - codec missing or unavailable

    Hi,
    I'm on a Windows 7 PC running Premiere Pro CS5. Have encountered a problem with .mov files that I haven't had before. I recently received three files from a shoot at a local tv station. They are .mov files and I believe they are in an XD CAM wrapper or format. I've gotten files from this station before and have imported them with no trouble (not sure if the earlier files were XD CAM, though). When I try to import, I get the error message: Codec missing or unavailable. Would using the Prism video convertor to convert to another format be the way to go? The file sizes range from 7.18 GB to 14.9 GB. Thanks in advance.

    Here's more info on the above clip:
    General
    Complete name                    : F:\FLV Projects\TalkingMatters\Leah Fabiano-Smith121312\Smith01.mov
    Format                           : QuickTime
    Format/Info                      : Original Apple specifications
    Format_Commercial_IfAny          : XDCAM EX422
    File size                        : 15.0 GiB
    Duration                         : 38mn 58s
    Overall bit rate                 : 55.0 Mbps
    Encoded date                     : UTC 2012-12-13 08:53:51
    Tagged date                      : UTC 2012-12-13 08:53:51
    ©TSC                             : 2997
    ©TSZ                             : 100
    Video
    ID                               : 1
    Format                           : MPEG Video
    Format_Commercial_IfAny          : XDCAM EX422
    Format version                   : Version 2
    Format profile                   : 4:2:2@High
    Format settings, BVOP            : Yes
    Format settings, Matrix          : Default
    Format settings, GOP             : M=3, N=15
    Codec ID                         : xd5b
    Codec ID/Hint                    : XDCAM
    Duration                         : 38mn 58s
    Bit rate mode                    : Constant
    Bit rate                         : 50.0 Mbps
    Width                            : 1 888 pixels
    Original width                   : 1 920 pixels
    Height                           : 1 062 pixels
    Original height                  : 1 080 pixels
    Display aspect ratio             : 16:9
    Frame rate mode                  : Constant
    Frame rate                       : 29.970 fps
    Color space                      : YUV
    Chroma subsampling               : 4:2:2
    Bit depth                        : 8 bits
    Scan type                        : Interlaced
    Scan order                       : Top Field First
    Compression mode                 : Lossy
    Bits/(Pixel*Frame)               : 0.832
    Stream size                      : 13.6 GiB (91%)
    Language                         : English
    Encoded date                     : UTC 2012-12-13 09:33:19
    Tagged date                      : UTC 2012-12-13 09:33:19
    Audio
    ID                               : 2
    Format                           : PCM
    Format settings, Endianness      : Big
    Format settings, Sign            : Unsigned
    Codec ID                         : in24
    Duration                         : 38mn 58s
    Bit rate mode                    : Constant
    Bit rate                         : 4 608 Kbps
    Channel(s)                       : 4 channels
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 24 bits
    Stream size                      : 1.25 GiB (8%)
    Language                         : English
    Encoded date                     : UTC 2012-12-13 09:33:19
    Tagged date                      : UTC 2012-12-13 09:33:19
    Menu
    ID                               : 3
    Language                         : English
    Encoded date                     : UTC 2012-12-13 09:33:19
    Tagged date                      : UTC 2012-12-13 09:33:19

  • Photoshop Video has no audio when playing WMV files, please help.

    Hello.  My Photoshop video editor works great with MOV files after installing Apple Quicktime the other day.
    Today I tried to load a WMV file into Photoshop's video editor.  I get the video, but no audio.  (The subject file plays perfectly in Windows Media Player.)  The master audio mute at the left end of the timeline window says the audio is not muted (and I test toggled while running the video).  And the video properties dialog that is accessible on the video clip icon itself shows the audio is not muted, and that the volume is set at 100%.   I see no other place where the audio could be killed.
    QUESTIONS:
    1) Is this another file type compatability issue, and if so, how can this be fixed? 
    2) Would Apple Quicktime PRO be appropriate to convert the WMV file into a MOV file, so that I could then work with all of my WMV files?
    Thank you for your assistance, Chuck

    Load the movie into QuickTime Player, open the Movie Inspector (Window menu), and look at the Format section. That will show the codecs used for the video and audio, the audio being the second one listed. Post that information here and someone can probably tell you what you'll need.
    Regards.

  • Losing audio when editing .mov files...

    I have 4 .mov video files that are parts of 1 video. I can't get them into Apple TV, but I wanted to join them together in one video, anyway. I'm not having any luck doing that. (I have the right to have these videos.)
    I can bring them into a sequence in FCP 6.0.6, and even export them in a form that I can put on my Apple TV. But I lose the audio, which makes them useless.
    Probably worth noting: When I bring these small .mov files into my sequence, I can see them and scrub through them, but I can't play them at all (they all have the red line indicating they need to be rendered first). I have the latest iMac 27" with the i7 processor and two internal drives, so I can't see why they'd have to be rendered first. They are really low-quality, small files (around 3MB each).
    Can anyone tell me what the problem might be? Thanks for any advice.

    I have the latest iMac 27" with the i7 processor and two internal drives, so I can't see why they'd have to be rendered first
    FCP only works natively with formats listed in the Easy Set Up list. It does NOT work natively with many formats that are intended for final delivery like MPG-4, h.264 and others. If you import those types of files into FCP they WILL need to be rendered. But it is better to first convert those files before you import into FCP. That fact that you can't hear the audio may indicate you're using a muxed format that will need to be demuxed for editing.
    This information is easily found in the User's Manual. It sounds like this would be a good time to read the basics.
    -DH
    Message was edited by: David Harbsmeier

  • No sound when playing ,mov files ?

    I converted a .avi file to .mov and when playing it in quicktime I have video but no sound. If I uninstall quicktime and use quicktime alternative + media player classic, the .mov files play perfect. But when I install quicktime again (which i have to have for my iPod) there is no sound. I cant figure out how to fix this.

    I have same problem. I have a law lecture CD with .mov files. It plays perfectly in Classic with QT 6.0 but with OS X QT 7 Pro the audio will not play. I called Apple, but got no satisfactory response from the help line.

  • Audio-yes, Video-no (totally black) when importing .mov into FCP X, please help!

    Hello
    I am trying to import some .mov files into Final Cut Pro X. The files were originally .RTS, shot from a Canon XHA1 in 1080i, I converted them to .mov using SmartConverter and they play absolutely fine in Quicktime. However, when I import them into FCP X, the audio plays fine, but the video just shows a black screen. The codecs of the .mov files are standard H.264/AAC. My other .mov files (from the same camera that were shot in 1080p instead of 1080i) import fine into FCP.
    Any advice would be greatly appreciated!
    Laura.

    Here's a print screen of the smart converter..

  • AE crashes when I move timeslider...Please Help..!

         I'm having a problem when I move the time slider in AE. It won't move and then the program crashes. I noticed when my teacher tried to hit some buttons to move it to the begining. I've tried uninstalling and reinstalling. Nothing. Please Help.

    I'm using windows 7 64- bit proffesional, I have CS4 Master Collection Education Version. The source footage is from the first lesson in the Adobe After Effects CS5 Classroom In a Book. I am able to open and do everything in AE up untill i have to playback or move timeslider. I have many other softwares in my system, including....Autodesk Entertainment Creation Suite (Maya, 3ds Max), Corel Painter 11, Unreal Development Kit, ZBrush 4 and so on......No third party codecs or plugins. I've never used AE untill my first class yesterday. Premeire Pro works great.....playback and timeslider in it work seamlessly without stutter. I have Core 2 Duo with Nvidia GTX 260m and 6gb of ram. This is the only app in Master collection i have a problem with.

  • How to stop the iTunes launching when play/pause is pressed? PLEASE HELP

    I have a macbook pro 13 inches. When I play computer game, during an intense battle, I always accidently press the play/pause button.
    Immediately, the iTunes launch, which will make my game go frozen and I would always lose the battle. This make me extremely frustrated, I have lose so many battles cause of this problem. I know that I could turn the top row of my action keys to Fn keys. That would solve my problems, right? But no. Becuase I use those keys very often. It would be awful without them. For example, the screen brightness, the mission control, the keyboard back-lit light, the volume adjust. Without all these, my mac experience would be awful. Im just wondering if there are other solution beside for turning the Fn keys on.
    PLEASE HELP ME

    This has fixed it for me
    http://redth.codes/itunes-media-hotkey-disabler/

  • Error when downloading movie to iPhone5. PLEASE HELP!

    When downloading movie to iPhone5, I receive an error that the movie was downloaded to another device.  Uh, no it was not.  PLEASE HELP!

    Hi Rienner
    Thank u for the tip.
    I try this tip.
    I am suppliying only
    plant,availabilitycheck, loading group and profit center
    to the PlantData Struture.
    Can u find any problem in this fields.
    Thannke & Regards,
    S.Shankar

  • No audio when playing m4v file

    I have a new laptop (HP Pavilion), downloaded the latest iTunes and QuickTime, and music files play fine. Trouble is that the TV shows I've purchased via iTunes have no audio. The video works great, but zero sound. I've uninstalled an re-installed iTunes, rebooted, etc. I'm running XP Pro. Sound card is fine as Windows Media Player plays ok.
    I saw a post about this from last summer, but no resolution. Anyone have any ideas?
    thanks

    I'm having a similar issue. When I play an m4v file, my computer freezes to the point I have to do a hard reboot. Yet if I go into services and stop the Windows Audio service, the m4v video plays fine without sound. All my other audio files play fine. It's very frustrating because I can't go to an earlier version to troubleshoot since my libraries are 7.2. If anyone knows of a fix, please let me know.
    I have a new laptop (HP Pavilion), downloaded the
    latest iTunes and QuickTime, and music files play
    fine. Trouble is that the TV shows I've purchased via
    iTunes have no audio. The video works great, but zero
    sound. I've uninstalled an re-installed iTunes,
    rebooted, etc. I'm running XP Pro. Sound card is fine
    as Windows Media Player plays ok.
    I saw a post about this from last summer, but no
    resolution. Anyone have any ideas?
    thanks

  • M4p, audio codec missing, please help

    How can I play a .m4p file on linux (with player)???
    I get this audio track from Itunes...
    And I use the all-codecs from mplayer
    Thankx for helping me
    Kingboxer

    m4p is the proprietary Apple iTunes format, isn't it? I don't think that there *is* a way to play this on Linux, except to use gtkpod to play it off your iPod directly (it is doing the decryption and decoding, not gtkpod). If you DO find a way, please post here. I would LOVE to find a way too...

  • Cannot play .mov files on iPad 2, help pl?

    I can export .mov video files from my iPhone 5 but cannot seem to play them on ipad2? Any ideas how to overcome this problem? thanks

    You can play them with free OPlayerHD Lite.
    https://itunes.apple.com/sg/app/oplayerhd-lite-best-free-video/id385896088?mt=8

Maybe you are looking for