No Audio when playing newly converted video files to MPEG-4

I have recently converted several movie files using the "convert Selection for iPod". This has resulted in all my files being converted to MPEG-4 format. But when I try and listen to them within itunes, I get video but no audio.... can someone help please?! btw, I can listen to audio files in itunes fine(MP3's), just not the movie files.

Try using Videora or MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(24651)

Similar Messages

ITunes 7.6 No Audio When Playing a Music Video or Movie

I just installed iTunes 7.6.0.29 (It was released today).
There is no audio when playing a music video or a movie that I've purchased. Movie trailers and music videos in the iTunes store have no audio either. Videos from iTunes University that I've downloaded (such as an MIT lecture) play fine w/ audio.
Music audio (such as tracks I've purchased or tracks on the iTunes store) play fine.
QuickTime videos, such as a QT video on my desktop play fine. Windows Media Player works fine too.
So, why don't music videos and movies play (w/audio) on iTunes 7.6??

I'm experiencing what appears to be the exact same issue. I just installed iTunes 7.6.
Video but no audio:
Purchased iTunes TV episodes
Streamed video trailers in the iTunes Store
Works fine:
All music files, including protected files purchased through iTunes
The standalone Quicktime player performs normally with MOV files. Windows Media Player still performs normally.
I found an old support doc complaining of a similar issue with a previous iTunes release and tried the suggested fix: Uninstalling Quicktime and reinstalling it using the standalone installer (Quicktime 7.4). I also reinstalled iTunes. Neither solved the issue.
I'm very disappointed that I can no longer access the files I've purchased. I hope this is fixed very soon.

No audio when playing music and videos

need help on my iphone 4s...no audio when playing music or watching videos...no volume display and volume buttons dont function...

Clean the dock connector and headphone jack. Lint or debris in either of this could cause this issue.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these steps in order until the issue is resolved.

Audio when playing a youtube video is heard seconds later

Everytime I play a video in youtube, the audio of it is heard seconds later which makes it very annoying. It works good on Google Chrome but not on Firefox.

Try to clear the Flash local storage and settings for YouTube.
*Windows Control Panel > Flash Player > Storage: Local Storage Settings
**Remove a specific domain: Local Storage Settings by site
Flash Website Storage Settings panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Global Storage Settings Panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html

No audio when playing videos

Upon downloading the latest update, I have for some reason, no audio
when playing back a video...any of them. Video is there, but no sound.
Thanks

I had the exact same issue on my Home computer with XP Home sp2--No audio in itunes
However, my work computer with XP Pro sp2 works fine with the updates.
I ended up taking the advice of some others on here and reinstalled the old version of Quick Time (7.3.1) which worked...Although I'm unable to see movie trailers with the old version...But all other videos, including the one movie that I purchased, I'm able to hear...

Mp4 converted video file is missing audio codec

I have several avi. files on my computer which were converted to mp4. using videora software. A few of these converted mp4. files then had no audio when I tried to play them on my Ipod. I am confused as to how to add the audio codec back into the video files. Do I have to install this to avi. then convert to mp4., or is there some audio codec which will apply directly to mp4. so they do not have to be reconverted? What is the procedure at this point? Thanks for your help in advance.

First thing to do is find out if Videora supports whatever audio codec the AVI uses.
If it supposedly does, write it off as one of the many bugs with videora and get a different transcoder that supports the audio codec.
Outside of having good knowledge of video production and the right tools-there is no easy way to do what you want.

Convert Video files in iTunes but no Audio after converting

Hy, do somebody know what is the matter if i want convert Video files in iTunes (8.01) but after converting the files don't have any audio but i can see the movie perfect in iTunes and on ATV ????

Your likely using muxed video such as mpeg1/mpeg2, which is capable of being played back in QT (with the QT mpeg2 playback component in the case of mpeg2 source video) but not able to be converted.
I could well guess which software you should use to undertake your conversions but it would be better if you could provide details of our source video so that we can suggest an appropriate workflow based on that information.
You can use the Inspector window in QT to see this information.

Using Adobe Presenter 7 when published to PDF video files do not play just a blank page, any ideas?

Using Adobe Presenter 7 when published to PDF video files do not just a blank page, any ideas? I am using office 2010 and Adobe Acrobat 9 on my PC any suggestions would be very helpful as the audio and slides work fine though no SWF files work just a blank white screen
Thanks

The problem seems to be with Acrobat 9. Can you share any such pdf generated from presenter at [email protected]
Alternatively, you can try to download Adobe Reader 10 http://get.adobe.com/reader/?promoid=JZEFU and try to view the published output usingthe same.

Hello, I bought the MY BOOK LIVE by WD. I did setup, according to the instructions. I stored video files in Live Book. When I opened up video file, that I stored in the MY BOOK LIVE folder, it didn't play well. It started play slow an frizzed. Please help

Hello, I bought the MY BOOK LIVE by WD. I did setup, according to the instructions. I stored video files in Live Book. When I opened up video file, that I stored in the MY BOOK LIVE folder, it didn't play well. It started play slow an in a few seconds freezed. Why? How can I fix it?
I wanted to buy the external hard drive storage, instead they sold me a sever storage and it doesn't work well.
Should I return it? What shoud I get instead?
Please help!
thank you so much!

Hello, I bought the MY BOOK LIVE by WD. I did setup, according to the instructions. I stored video files in Live Book. When I opened up video file, that I stored in the MY BOOK LIVE folder, it didn't play well. It started play slow an in a few seconds freezed. Why? How can I fix it?
I wanted to buy the external hard drive storage, instead they sold me a sever storage and it doesn't work well.
Should I return it? What shoud I get instead?
Please help!
thank you so much!

How i can play smoother HD video files in realtime, when i change the duration in cs6

How i can play smoother HD video files in realtime, when i change the duration in cs6.

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840

How to play back AVCHD video files without jerkiness result?

Hi all, I have an iMac 27" 3.06Ghz as well as the new MacBook Air 13 1.86Ghz, and both have 4GB of RAM. When I tried to play back AVCHD video files (*.mts) recorded from my Canon HF200 HD camcorder, the play back is always jerky and choppy. I have tried various software like Perian for QT, VLC, MPlayer Extended, all have the same result. However, I can play back other 1080p files like MKV and MOV just fine.
Is the jerkiness problem that I am seeing due to underpowered hardware? or is it I am not using the correct software? Note that I am not trying to edit HD videos, I just want to be able to play them back smoothly. I can play the same files on Windows 7 natively without any issues.
I am curious if any of you have the same problem. Please help!
Thanks in advance.
Ken

Swaza,
Just thought I would jump in and share some experiences with .tod and .mod files.
I too have the JVC GZ-HD7 camera and I can confirm that the new version of the MPEG-SC 1.93beta will open and convert .tod to .mov for use with iMovieHD. I am not sure that the files can be used with iMovie08 since I have not tried, but it will work in iMovieHD just like any other qt or .mov file import.
Also, you can use the QTpro plugin that came with the camera (should be on the CD as the only MAC software available.) This will allow you to open the files in QT and convert them to any other format needed. This plugin unfortunately does not allow QTpro to open the older .mod files of previous JVC cameras. For that you can still use MPEG-SC.
In my experiences over the last few weeks, having mistakenly dumped all of my footage onto my hdd as I used to do with my older JVC cameras, I am now stuck with 3 hours of footage on my HDD as .tod files. I have been struggling to find the right blend of codec type, compression amount, fps, and quality to convert these files in an acceptable resolution (1920x1080 full - another mistake since iMovie08 will not import this quality but will import the 1440 CBR mode.) Converting these files is a nightmare and has become a stain on my otherwise wonderfu lexperience with this new camera (It is an awesome camera despite what negative stuff the "Canon fanboys" are saying!) It takes an unbelievably long time to convert. And you will find that when viewing these files in QT either as .tod or even after converting to .mov, they will be jerky and stutter. I believe this is more to the fact that the files are just really huge. Playback inside of iMovie06HD was perfect for me though.
Hope this helps out and I hope others may offer solutions as to what codecs they are using and what settings they are using to keep the quality as high as possible when converting these files.

Converting video files to iPOD

I have an iPod 30Gig. When im converting video-files in iTunes to the format that the iPod can view, the player plays the files with no sound. I use the newest version of iTunes..does anybody know what to do to get sound when playing videofiles on my iPod??

hi terry!
hmmmm. let's try checking to see if it's all video files that you don't get sound on (in the ipod), or just ones from a particular source.
this document might be helpful with that:
Verifying iTunes video conversion and iPod video syncing using sample QuickTime files
love, b

Converting video files for the N97

Can anyone recommend a good piece of software for converting video files into mp4 for the N97?
I have tried Nero, and various other freeware and shareware packages, and I am able to produce a file which will play on my PC, but nothing which will play on the N97. In some cases the phone cannot see the file at all, other times it's there through file manager, but only plays the audio, no video.
This is getting frustrating!
Thanks
Andrew

Give Format Factory a try http://www.pcfreetime.com/ converts virtually all video types including DVD.
has profiles for most mobile phones including the Nokia 5800 (works with the N97)
also converts most audio types and images
Best of all, it's Free
Message Edited by foxmeister on 04-Jul-2009 12:12 AM
If this Post is helpful. A click on the White Kudos star is always Appreciated
Last Nokia: Nokia Lumia 800
Current Phone: A Non Nokia Device
Previous Phones:Don't Ask ;-)

How to convert video files so they render in FCP?

I'm having trouble converting video files and using them in FCP. My problem is I have to keep rendering a clip every time I modify it in FCP. I know how to fix this issue with audio by exporting a file to the correct sample rate, but with video I can't find the correct option. I've tried converting my video to MPEG-4 and Quicktime movie but nothing works.

Convert it to a nle friendly format like DV, Pro Res, etc. Mpeg4 is not nle friendly.
Import the video.
Make sure the sequence settings are the same as the video clip--i.e. if you converted the video to DV NTSC 29.97, the sequence setting should match that.
If your sequence settings match your video, you won't have to render unless you add an effect or transition, etc.

What is the best software for converting video files to .ogg format?

In trying to html5 compliant I want to convert my video files to the .ogg format. After a lot of searching for video converters, I cannot find one that does this; although several claim to but actually don't. Converting audio isn't so much of a problem. So, can you suggest a tool for converting video files to .ogg format?

See this Wikipedia article for some encoders:
* http://en.wikipedia.org/wiki/Theora#Encoding

No Audio when playing newly converted video files to MPEG-4

Similar Messages

Maybe you are looking for