No audio when presenting

Hello,
I recorded audio in ppt with adobe presenter and publish it to adobe connect.
When I open uploaded file in the management console with given url, I can hear the recording. However, when sharing it inside a meeting, it says "no audio".
Anybody experienced this issue?
Regards,
arda

I will be out of the office starting 15/04/2011 and will not return until
16/05/2011.
I will be out of the office on annual leave and will have no access to my
emails. If your matter is urgent then please contact my colleagues Carmen
Shields or Sonia Savage. Alternatively I will deal with your query on my
return.

Similar Messages

'No audio' when viewing Adobe Presenter

Hi,
I am also unable to hear any audio when viewing lectures for class via adobe presenter- I am on a gateway netbook - not a MAC. I have installed the windows add-in (feb.2014 update) & cleared the browsing history with no success. No audio issues with any other programs. I am running Windows 7, have adobe9 and powerpoint 2010.
I do not need to run presenter to present files myself- I only need to watch the lectures provided by my professor. The progress bar at the bottom of the slide page reads "no audio"
What else can I do?
Any other solutions would be extremely helpful!

The Presenter files worked for me the last time I taught my class.
After following the advice in this thread (uninstalling and installing Flash Player, installing the Connet add-in) the Presenter file did play audio. . . . ONCE. I thought it was solved but now I'm getting the NO AUDIO display again.
My colleague in the same department has no problem with audio using OS 10.6.8 on Safari 5.1.2 (Same as my set-up). He is also successfully playing it on his MacBook Pro 10.7.3 on Firefox (10.0.2).
I'm mystified. Has anybody an idea of where the Connect add-in gets installed? Maybe the folder just needs a good cleaning.

Audio Problems - Presenter 6 & 7

I currently use Presenter 6.2 (but have also downloaded and
tried this with Presenter 7.0). Whenever I try use Import Audio,
Synchronize Audio, or Audio Editor, Powerpoint crasches. That is
part of the problem.
The other more serious part for now is that when I click on
Record Audio and begin to record audio, there is always an
electronic interference type noise being recorded over the audio. I
have isolated it to the Presenter Plugin, as my headphones record
just fine in other programs (but this does me no good, as I cannot
import audio without Powerpoint crasching).
I am therefore assuming that there is a problem between the
Presenter plugin and my sound card (and/or codecs). I have a
SigmaTel High Definition Audio Codec. I am not sure however where
the information is for my actual sound card. It was not listed in
the device manager , only the drivers and codecs were there. There
was one the said Legacy Audio Drivers, Manufacturer (standard
system devices, location uknown, but said to be working properly).
Does anyone have any idea what I can do to resolve these
problems? - most importantly, being able to record audio in
Presenter without this electronic interference being recorded over
the voice recordings.
I am using a Dell Latitude D830 with Windows XP Professional
Version 2002 SP2, with Microsoft Powerpoint (Office) 2003, Intel
Core 2 Duo 2.2Ghz, 2GB RAM. Also perhaps important is that I am
also using a German version of Windows
Thanks for any help you may be able to provide me in
resolving this issue.

Best practice for tables in HTML (RH or not) is to use
percentages instead of absolute measures. Using this method, we
have had no problems with the transform into Printed Doc.
We use:
For 2-column tables at normal paragraph level, 100% and
usually 20%,80%
For 2-column tables in a list, 90% and usually 20%,70%
For 2-column tables in a second-level list, 80% and usually
20%,60%
Don't worry about any long, unbroken character strings in
column 1 (such as a long database column name), because the HTML
default is to grab the space it needs to prevent breaking up such a
string. If the text needs 27%, for example, it will take it.
Good luck,
Leon

Encore CS3 - Hangs and import problems with menus and avi footage with audio tracks present.

I'm trying to import some footage files in .avi format into Encore CS3 and am having several problems.
In what follows when I say "crash" I mean Encore quits with a standard Windows error. When I say "hang" I mean Encore does not quit but rather becomes an unresponsive process that must be killed manually using Windows Task Manager.
My System:
WinXP Pro SP2
2.93 GHz Intel Celeron CPU - single core
Intel PERL mobo
3GB 400MHz RAM
NVidia 7800GS video
I mention these specs however I am not experiencing any hardware
related bugs or issues (like out of memory or video driver crashes
etc) when using any CS3 app.
The footage files (as reported by GSpot) and problems I am seeing. In all cases GSpot reports that I have the appropriate codec installed:
footage1.avi - Dx50 XVid 1.0.3, Dolby AC3 48kHz 192kb/s, 716834 KB
Attempting to import as timeline causes Encore CS3 to hang.
Importing as an Asset allows it to import but when I try to click
on it in the project windown to add it to a new empty timeline,
Encore hangs. It plays fine in Windows Media Player.
footage2.avi - Dx50 XVid 1.0.3, MPEG-1 Layer 3 48kHz 128kb/s, 718302 KB
Imports fine as either a timeline or asset but no audio track comes
with it, even though there is an audio track in the footage. It plays
fine in Windows Media Player. Video imports perfectly, just no audio.
footage3.avi - Dx50 XVid 1.0.3, MPEG1-Layer3 48kHz 112kb/s, 717606 KB
Imports fine as either a timeline or asset but no audio track comes
with it, even though there is an audio track in the footage. It plays
fine in Windows Media Player. Video imports perfectly, just no
audio. I tried converting this one using AVS to both MPEG3 and DivX,
each using MPEG1-Layer3 44kHz 192kb/s audio, and got the same issue
upon importing into Encore CS3. I also loaded it into Camtasia
Studio and it looked fine over there. The audio was present and I
was able to export it as a .WAV file. When I tried looking at the
file in Soundbooth CS3, there was no audio track or, more
accurately, the audio track was a flat line.
By way of comparison these are importing perfectly:
footage4.avi - XVID XviD 1.1.0 Beta2, MPEG1-Layer3 48kHz 189kb/s Two mono
channels LAME3.96r, 717436 KB.
footage5.avi - XVID XviD 1.1.0 Final, Dolby AC3 48kHz 448kb/s Six
channels (3/2 .1), 716418 KB.
footage6.avi - XVID XviD 1.1.0 Final, Dolby AC3 48kHz 448kb/s Six
channels (3/2 .1), 716418 KB.
footage7.avi - XVID XviD 1.0.3, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 717502 KB
footage8.avi - XVID XviD 1.0.3, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 717180 KB
footage9.avi - XVID XviD 1.1.2 Final, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 2291904 KB
Although this one imported & transcoded correctly, when I went to
build it to a DVD image file I got some strange errors during the
"planning video" stage that prevented the process from completing.
Unfortunately I neglected to write down the error message I recieved
which read like quite nonsensical babble to me, and I have since
deleted the project folder. I remember it was not a memory or
display related error and it included a timestamp where the error
was happening. I played the footage in the preview panel thru the
identified timestamp but it previewed perfectly without even a
jitter in either the video or audio. Took forever to transcode so I
doubt I'll be doing this one again anytime soon.
Another issue I am having is with the motion menus. I burned a DVD and it does not load correctly in one of my DVD players (a Sony rdr-gx330 recorder/player). It appears to take extra time to recognize the disk, the startup (first-play) menu does not show automatically, and I must press the Main Menu button on the

Another issue I am having is with the motion menus. I burned a DVD and it does not load correctly in one of my DVD players (a Sony rdr-gx330 recorder/player). It appears to take extra time to recognize the disk, the startup (first-play) menu does not show automatically, and I must press the Main Menu button on the remote control to make it appear. Other than that it seems to play ok in that player. Also tested it in 2 other DVD players (a Panasonic and Zenith) and it worked just fine like it's supposed to in them. Also plays perfectly in my computer's DVD player/burner using Windows Media Player v10. I tried burning to Memorex +RW single-layer single-sided disks at 6, 7, & 8Mbps project settings but got the exact same result every time.
Encore CS3 crashes fairly often during authoring, particularly during imports, and when I go to edit things like calling up a timeline in the timeline panel, dragging footage into an existing timeline, or changing button links in a menu etc.. I have also experienced seemingly random hangs even more often, probably 5 or 6 times as often as a crash. Saving the project after every little change I make, then closing and restarting Encore allows me to make progress albeit at a significantly reduced workflow rate. Accessing Photoshop from Encore appears to be working flawlessly so far aside from the slow load times. Encore hangs sometimes during video transcoding, repeat the process and it works ok. If I try to import a menu from the library after importing my footage files, Encore hangs trying to import it either at the 50% mark or the 99% mark (it varies even with the same exact menu selected from the library). If I import the menu first and the footage after, then no problems. Also trying to render motion menus after importing footage causes Encore to hang, render before footage import and everything works ok. Interestingly enough, previewing my project in Encore's monitor or preview panels works perfectly even in High quality mode -- in fact it operates quite smoothly in comparison to other apps I have tried. Although those footage files that had missing audio tracks on import obviously played silently, I have yet to experience a hang or crash during a preview or when scrubbing through a timeline in the monitor panel.
The last problem I've seen is with the project cache files. It doesn't always get rid of cache files when stuff is deleted from the project. I was working on one project and surprisingly ran out of disk space. When I tracked it down I found that there were some two dozen copies of a footage file I had repeatedly imported and deleted from the project still sitting in the cache folder. The file was an avi about 2GB so it was taking up some 40 GB of disk space for stuff that was no longer in the project. I tried shutting down Encore and manually deleting all the cache files, and that worked for most of them, but there was one 2GB file that kept reappearing in the cache folder even though it was no longer in the project. The XML file in the cache folder still had references to it in there so I can only assume that was the reason it kept showing up. I eventually had to delete and totally recreate the project from scratch to regain my lost disk space. This included having to sit thru a 6 hour long transcoding session which pissed me off to no end.
Encore CS3 appears on the surface to be a very powerful, feature rich, and approachable app with a simple easy to use interface, but it is awfully bugged in just about every area I have explored and still needs lots and lots of work for it to be really useful. Frankly for me it is pretty damn annoying that I have invested so much money in this suite only to find several of the apps in it (Encore & Premiere in particular) behaving this poorly. In my opinion every single app in the suite exhibits lousy performance whenever you must do anything at all involving the disk from the time you click to start it up until the time you click to close it down. Several of them are just as seriously bugged as Encore too, and being a long time Photoshop v5.5 user I expected much more from Adobe. Even Photoshop is two or three times as slow now (e.g. it takes about 20-30 seconds to simply create an empty 500x500 pixel image file and almost a full minute to load a 30x60 pixel single-layer gif). So far I have attempted to create 6 DVDs using Encore and after 3 weeks of effort have only succeeded in getting one of them onto a final disk -- and that one is kinda limping to work correctly in my DVD player. Three of those projects became so corrupted while working on them that I had to delete them completely and recreate them from scratch, only to find that I still couldn't get them to completion for one reason or another. Seriously disappointing.

No audio veiwing presenter

My wife is unable to hear any audio when trying to view lectures via adobe presenter. unlike the majority of people with this problem we have windows 8 on an acer laptop not MAC. We have tried all suggestions and cannot seem to get anything to work. audio works fine with all other media. it is getting very frustrating as she needs to view the lectures for her class. the diagnostic test says that everything is fine. is there anything we can do?

Hi Garett,
Can you please confirm the Adobe Presenter version and MS Powerpoint version that you are using ?
Does the audio works fine while previewing in Presenter ? Have you checked the result after publishing your project locally on your machine from Presenter ?
Regards,
Ajit

No Audio When Playing an MPEG 2 File

Hello,
I have Quicktime Pro and the MPEG plugin. I have played several different MPEG files in different players and audio is present. When I play one of these files in Quicktime, all I get is video. There is obviously audio embedded as one of the streams in the MPEG file.
Why doesn't Quicktime play the audio portion of the file?
Thanks,
Gary Young

Some mpeg-2 files use AC3 encoding for the audio stream and the Apple mpeg2 component does not play that form of audio.
http://www.apple.com/quicktime/mpeg2/faq.html
If you just want to play those problem files (not trancode to other formats) you could try this alternate player, as it plays the sound in most mpeg-2 files:
VLC

Dropping audio when dragging clip from Source Panel to Timeline

I have having issues with audio being dropped when dragged from the Source Panel to the Timeline. Audio is present in the Source Panel and plays great along with video, but when I drag the selected clip to the Timeline it drops the audio.

Can't transfer video from source monitor to timeline
This is an answer to a previous topic about video but the same answer also applies to audio

No audio when with second monitor attached and using Extend, Duplicate,or Second Screen Only modes

When I attached a second monitor via HDMI cable and try to use Duplicate, Extend, or Second Screen only display modes, I can get the video to display and run but I get no audio unless I set the notebook display settings to P/C Only mode. I really want to use the second screen for PowerPoint/Presenter View and play a embedded video (along with the sound). Even if I try to play a YouTube video I can only get audio when in P/C Screen Only mode. Any assistance would be greatly appreciated. Thank you.
This question was solved.
View Solution.

Hi,
Please disable HDMI sound to force audio back to the laptop or use different conection such as VGA or DVI. To diable HDMI sound, please right click speaker icon > playback devices > right click and disable HDMI sound.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

No audio when clip is dragged into movie

I found this out the hard way.. I made a movie in iMovie, and then made a dvd in iDVD, and found out (after several hours of work) that there was no audio on my DVD (except for at the menus).
I went back to iMovie and found out that my movie was no longer playing audio, it was not just a DVD issue. However, when I drag the clips back up to the clip pane and play them from there, the accompanying audio is present... but when I drag them back down into the timeline, they seem to 'lose' all audio.
This footage was imported from analog using a converter box, but I have never had these problems before while using the same equipment.
The only thing I have done differently on this project than some others is that I exported two of the clips into quicktimes for use on my iDVD menus.
Any suggestions on how to regain my missing audio in the movie??? Thanks!

Make sure you have the audio check box marked off in the time line. You'll find it in the bottom right side of the iMovie window next to the video line.

Audio Tip: Do not edit audio in Presenter

After much wasted time trying to figure out why is was not playing back properly with missing audio I wanted to pass this tip along...
With Presenter 7.0.6 or 7.0.7 do not edit audio. This includes inserting silence and cutting out audio.
For some reason Presenter created MULTIPLE MP3 files for each slide. I have one slide that has 55 seconds of audio and Presenter has split that into 16 different MP3 files. Some are .5 seconds long. This seems to mess up the play back sometimes freezing up playback.
Record your audio using something else and import one MP3 for each slide and then add the slide timing.

Hey Frank. This is a good tip. Ever since Presenter changed the way they handle audio files, we have stopped recording our audio in Presenter; we all happen to have Captivate licenses on my team so we use it to record and edit all audio before we export to Presenter. If we have to make any changes, we also go back to Captivate and import the changed audio again. We tried working with the Adobe "support" for months on this issue and got nowhere. Each time you alter audio, even if you remove your breathing sounds, if divides the audio into two parts at the place where you changed it. So, yes, for longer pieces of audio, you end up with multiple files. Presenter does "merge" them together when you publish; however, it doesn't do a very good job of it. So every time the playbar reaches one of these split sections of the audio, it has a little glitch.
Now that you can record audio in PowerPoint and since the PowerPoint integration is so much better in Captivate, we will be dropping our Presenter licences. We may keep one or two so we can update existing modules. Unfortunately when the product has too many glitches and the support is not good (we had Gold or Platinum support too), you can't afford to stay with the product. We've used it for about 6 years.

No audio when online

For some reason, I have no audio when online with my Satellite P505D. It works fine in all of my video and music programs, but as soon as I go online, I cant hear anything. It doesn't matter what browser I use, explorer, chrome, or firefox. I cant hear anything in any of them. I have uninstalled, reinstalled, and updated all of the audio drivers, but still nothing. Any suggestions?
Thanks

The Presenter files worked for me the last time I taught my class.
After following the advice in this thread (uninstalling and installing Flash Player, installing the Connet add-in) the Presenter file did play audio. . . . ONCE. I thought it was solved but now I'm getting the NO AUDIO display again.
My colleague in the same department has no problem with audio using OS 10.6.8 on Safari 5.1.2 (Same as my set-up). He is also successfully playing it on his MacBook Pro 10.7.3 on Firefox (10.0.2).
I'm mystified. Has anybody an idea of where the Connect add-in gets installed? Maybe the folder just needs a good cleaning.

No audio when i record video on my iphone 6plus using the front... the rear camera is doing fine.. pls help

no audio when i record video on iphone 6plus using the front... but the rear or back camera is workin fine... pls help

Hi ria05,
If you are having issues with your iPhone not recording sound when using your front camera, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

Iphone 5S IOS8 - quality of audio when taking video?

The biggest disappointment with the 5S was the TERRIBLY distorted audio when taking videos of live music or loud events. The 4S didn't feature the front mic and therefor sound was passing by perpendicular to the mic and it would not be as "hot" of a signal.
I have not one but two external mice I use when I plan*** on taking video but living in a city with tons of music I am not always prepared with an external mic. Taking video with IOS7 with the 5S is useless if the audio source is above 85db or so.
Can anyone who has upgraded IOS on the 5S confirm that they have corrected the software for the mic sensitivity for a 5S? My buddy has the 6 and his live videos of music do NOT distort.
Thanks!

Hello AudioArchist,
Does the issue of recording videos still not get any sounds? If so, take a look at the article below to troubleshoot the issue further. Now it may be hard to give the exact reason why that happened, but the article should assist with getting it fixed.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Regards,
-Norm G.

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV.

HT201177 no audio when using a mini display port to HDMI cable to TV on my Macbook pro

no audio when using a mini display port to HDMI cable to TV on my Macbook pro. can only see the video

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

No audio when presenting

Similar Messages

Maybe you are looking for