No audio when recording and no one can hear me when using speaker?

Whenever I take videos now, there's no audio it's just this buzzing noise. Kind of like white noise. I used to take videos on my phone all the time and it would work. I'm not sure how to fix this. Also, I can't use my speaker phone. I can hear people talk on it but they never hear me. That issue started one month after I got the phone. I've had it about 8 months now. Anyone know of any fixes?

Does the Voice Memos app work? It has a VU meter so you can see if the mic is working.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

Similar Messages

My iPhone 5s is showing Headphone is in use. I can hear conversation without using speaker or headphone

I can't hear conversation without using headphone or speaker

Hello there, Femierinfolami.
The following Knowledge Base article offers up some good recommendations for troubleshooting your issue:
iPhone: Microphone issues.
http://support.apple.com/kb/ts5183
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Hello i opened both logics 9 and x at the same time after that lost audio on both softwares everything looks normas got a motu audio interface 828MKII and i just can hear audio in the headphones of the audio interface can anybody help me? i am in the midd

Hello i opened logic 9 and logic x at the same time after that i lost audio in both programs i can only hear audio in the main output of my interface motu 828MKII
can somebody help me please? am in the middle of o project thank's

Did you reset Logic's audio preferences?
Did you do a hardware reset of the MOTU unit?
Try deleting preferences in Logic X
See my post in this message.
https://discussions.apple.com/message/24614057#24614057

When i press the "speaker" button/icon - i can hear ok , no one can hear me

when i press the "speaker"button/icon - i can hear OK but no one can hear me on the speaker?

Hello Michaelonesixthree,
The following article provides troubleshooting steps that can help restore functionality to your iPhone's speaker.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen

Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

As far as I know, Apple sells no such configuration. However, under Settings > General > Accessability, there is an option to play back audio in monoural mode, which would then play both halves of a stereo mix in each earbud.
Hope that helps.

IPhone 5 works fine with incoming calls and audio books but no one can hear me talk.

I have an add-on blue tooth system in my older Prius and it worked perfectly for a couple of years. I can still receive phone calls and listen to audio books through my radio speakers but all of a sudden my callers could no longer hear my voice so I have to switch the phone audio source to iPhone so they can hear me. This happened when I had the iPhone 4 and has continued with the iPhone 5. Any suggestions on how to fix this?

Hi, Did you test to see if after 2 or 3 mins the phone started working correctly? mine does then it will work for a day or 2 on every call then I have to do the same thing again.

HT1338 I have Microsoft Word for Apple, and when I send an attachment to an email, it goes as "application/octet-stream", and no one can open it. What can I do to send it as an ordinary word.doc

I have Microsoft Word for Apple, and when I send an attachment to an email, it goes as "application/octet-stream", and no one can open it. What can I do to send it as an ordinary word.doc>

You could Zip it.
 Cheers, Tom

Comparing Two tables with 300k records and update one table

Could you let me know how to compare two tables having 300k records and update one table.below is the scenario.
Table Tabl_1 has columns A,B and Tabl_2 has columns B,new_column.
Column B has same data in both the tables.
I need to update Tabl_2 in new_column with Tabl_1 A column data by comparing B column in both tables.
I m trying to do using PLSQL Tables.
Any suggestion?
Thanks.

Hi,
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved, so that the people who want to help you can re-create the problem and test their ideas.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
If you're asking about a DML statement, such as UPDATE, the CREATE TABLE and INSERT statements should re-create the tables as they are before the DML, and the results will be the contents of the changed table(s) when everything is finished.
Always say which version of Oracle you're using (for example, 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002
ef2019c7-080c-4475-9cf4-2cf1b1057a41 wrote:
Could you let me know how to compare two tables having 300k records and update one table.below is the scenario.
Table Tabl_1 has columns A,B and Tabl_2 has columns B,new_column.
Column B has same data in both the tables.
I need to update Tabl_2 in new_column with Tabl_1 A column data by comparing B column in both tables.
I m trying to do using PLSQL Tables.
Any suggestion?
Thanks.
Why are you trying to use PL/SQL tables? If tabl_1 and tabl_2 are regular database tables, it will be much simpler and faster just to use them.
Depending on your requirements, you can do an UPDATE or MERGE, either in SQL or in PL/SQL.

How can i detach the video from a clip so i can only use the audio when using imovie?

how can i detach the video from a clip so i can only use the audio when using imovie?

First, go to iMovie/Preferences and enable the Advanced Tools.
Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

HT201257 I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to

I just bought an imac in september 2012. And i just find out that my microphone is not working. So i did an apple hardware test and with no problems found? I have sound but no one can hear me, not even the computer. Should i bring it back to the store

Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone. Then you can look into Applications > Utilities > Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
It is the 5 second timing that initiates the reset.
then go through the process of looking for the microphone again as the reset may reenable the mic.

HT4623 After installing iOS 7 my microphone isn't working. No recording , no one can hear me on Skype

After installing ios7 my microphone isn't working. No one can hear me on Skype. Recording device arnt working too. I rebooted the device as well downloaded Skype again. Please help me

A restore will not work either. I went to the Apple genius bar and they did everything, but nothing worked. "It is your hardware". No, it is not. It is Apple's IOS 7 software that was not properly coded/tested before they released it. Now they will not own up to the problem. There are too many people with the same issue that suddenly happened after the IOS 7 install. Come on, Apple. Fix this! These are expensive devices and many of us will not buy another iPad if we run a risk like this.

What do you do when you can receive a call, but no one can hear you?

What do you do when you can receive a call, but no one can hear you?

From a Kappy post
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

I'm having trouble making calls with my Iphone 4. When I try to, the person on the other side can't hear me, and all I can hear are noises. But when I use apps like Viber or Facetime, I can make calls just fine! What may be the problem?

When I try to, the person on the other side can't hear me, and all I can hear are noises. But when I use apps like Viber or Facetime, I can make calls just fine! What may be the problem?

Did you fix the problem? I have the same problem and it has been pain in the neck.

Used "find my iphone app" and now that I have found my iphone, no one can hear me talk? how do I let Apple know I have found my Iphone so I can use my Iphone?

used "find my iphone app" and now that I have found my iphone, no one can hear me talk? how do I let Apple know I have found my Iphone so I can use my Iphone?
so frustrated.

Well its defintiely nothing that Apple can activate to fix this. They would be able to troubleshoot with you though. This may be able to be resolved if its something software related.
You can chat into Apple by visiting https://getsupport.apple.com

No audio when recording and no one can hear me when using speaker?

Similar Messages

Maybe you are looking for