No audio when recording movie with iPhone 4

When I record a movie, my phone does not record audio. I am sure not to cover the mic area, and all it records is static.

Had same issue from an iPad.
After airplaying a movie rented on the iPad I had no sound from iPod app on iPad and also an audio stream in Safari would not Airplay to Apple TV 2.
Videos were fine playing video and audio over Airplay. Photos app was happily airplaying images.
All OK after reset on ATV2
ATV 4.1.1
iPad 4.2.1

Similar Messages

  • No sound when recording videos with iphone 4s - ios7

    Since I have downloaded ios7 to my iphone 4s I am no longer getting any sounds when recording videos. When looking back at past videos I have recorded, they still have sound in the playback. I have tried resetting my phone and reseting it to factory settings. Any recommendations?

    Hey Bryan3939!
    If I'm reading this correctly, it sounds like you might be experiencing an issue with your microphone recording during videos. I have an article for you that can help you troubleshoot this issue:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Very very weird webcam behaviour when recording movie with quicktime????!!!

    Ok tried today playing about with photobooth, and after a while it bugged, camera not recongnised open quicktime and tried to record a movie and there was the little icon saying there was no camera. Anyway, rebooted the computer photobooth ok but slow, threw preference files relaunched fine. tried quicktime, and the image is reversedright is left and left is right how can i fix that???? Thank you for input.
    David

    I think I found the solution. Some further digging revealed that I did not have as previously assumed the latest driver for my graphics card installed. I was mislead because the manufacturer (Dell) did provide some updates, but not all of them (none in the past two years to be exact). I grabbed the newest driver kit from the ATI website and installed it. Strangely, the installer produced several errors and I get another error message at startup, but I think only the control software was affected and not the driver itself.
    After some first tests, QuickTime movies behave as expected, the preview renders are working again and the crashes on exit are also gone. Yay!
    Strange how much trouble a driver which is otherwise working perfectly can cause.

  • No audio when recording a movie on iMovie?

    I recorded a movie of myself as an intended blog video for YouTube but there is no audio when I play it back.
    I have checked System Preferences to ensure built-in microphone settings are good and they are.
    I have a 2011 Macbook Pro with up-to-date software.
    I found my similar posts online to mine but no answers.
    Operating System 10.7.5
    Thank you in advance for your help.

    Hi
    This is a bit unclear to me.
    No audio when recording
    No Video-editing program I know off play any feedback (at standard settings) while recording. FinalCut is even worse that it doesn't play the sound while importing from Camera either (one need to connect speakers to the Camera-audio-out to get this)
    So first - I'm not sure if You can get audio out while recording in iMovie at all.
    BUT
    If there is no sound - When Your captured video is played back - then the problem is more severe and I would start with.
    • Trashing iMovie pref and cache files
    and see if that helps.
    Please - be more descriptive - so that one can do the same actions to see if Your problem is Yours only or if it is the same on more Macs.
    Yours Bengt W

  • No audio when recording video iPhone 6 (4.7in)

    I just got my 6 and love it, but I have noticed that I have ZERO audio when recording video, but rather some feedback.
    I have tried rebooting and powering off/on. Nothing has worked.
    Any help would be very much appreciated. I hope my phone doesn't have an issue.
    Thanks,
    Geoff

    Nevermind, I had the back covered. Silly me to think it used the same microphone on the bottom of the phone..

  • No audio when shooting video on iPhone 6

    Since getting my iPhone 6+ I've shot 3 videos, only one that actually played audio back, but was so muffled you had to have the phone up to your ear to hear it. Every time I take a video I'm a little more than arms length away from who I am filming, so I know it's not that I'm too far away.
    Anyone else having similar problems?

    Hello bluespower21,
    Thanks for using Apple Support Communities.
    From your post I see you're experiencing issues with the audio on your recorded videos.  I'd like you to make sure that when you shoot a video that you're not covering the microphone when recording, either with your hand or a case, and follow the directions in the article below.
    Resolution
    Test the microphone
    To find out if there is an issue with the microphone itself—and not the app you're using or your cellular connection—test the microphone with the built-in Voice Memos app. Speak into the microphone and then play back the recording. You should be able to hear your voice clearly.
    Fix common issues
    Follow these steps, testing after each with Voice Memos.
    Unplug anything plugged into the headset jack.
    If you're on a call and holding your phone next to your ear, speak into the microphone and make sure you don't block it with your fingers or shoulder.
    If you're using a screen protector or case that covers the microphone, remove it. Clear any debris from the microphones.
    Restart your device.
    Update to the latest version of iOS.
    If you've tried these steps and people still can't hear you well on calls, contact Apple Support.
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    Take care,
    Alex H.

  • What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.

    What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • No audio when using FaceTime on iPhone.

    No audio when using FaceTime on iPhone. The video works, but just static is heard during call. I have attempted multiple calls to another iphone and my mac. Should I send the phone in for repair?

    Hi Anne-Lill Holme,
    Thanks for visiting Apple Support Communities.
    If you are not being heard during FaceTime calls on your iPhone 6, I recommend starting with these troubleshooting tips:
    Restart your device.
    If using FaceTime over a Wi-Fi network, go to the steps to resolve Wi-Fi network issues.
    From:
    iOS: Troubleshooting FaceTime
    Next, I recommend testing your iPhone 6 microphone in other applications, such as Voice Memos. 
    If you cannot be heard on recordings in other apps, see this article for additional troubleshooting help:
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    Best Regards,
    Jeremy

  • No audio when recording with isight

    When I try to record anything with imovie 08 and the built-in isight camera, there is no sound. The video works fine, but no sound. The microphone works, I've used it in other programs, but it just won't work in imovie. Any ideas?

    Hello lgpuma13
    If you have not quit and restarted iMovie, doing so may correct your problem. If not, restart your Mac and test again with no other AV apps running during the test. If neither restart helps, consider the following ideas.
    I read your post to mean you have no sound when you playback your movie, not merely when you move the pointer back and forth (or “skim”) over the clips.
    If the above is not your problem, check your Audio Adjustments for appropriate volume or other settings that might effect your level.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2)  External iSight

  • My Audio And Software Tracks are quiter when Record Enabled with Plugins on

    When my tracks are armed to record the volume seems much quieter...Then after I record the take and playback its full volume;;; I think its a preference I accidently set??...Example..
    If I have a piano software plug on, its quiter during recording then playback..But even during playback, if that track is highlighted on Arrange its quite,,,I have to un highlight the track...Even when recording audio if Im perhaps using channel strip settings??...Ideas>>>????? Anyone??/

    Bee Jay wrote:
    I do tend to assume a certain level of experience some times...
    I think everybody tends to do that - including the questioners. So don't be too hard on yourself...

  • Audio capture recording .mov - .m4a

    I accidentally saved an audio capture recording with QT without switching it to save as audio. It's now a .mov (saved as movie) instead of .m4a. How do I convert from the .mov to .m4a? Also, is there any way to make it save as audio (.m4a) by default?

    Ah, yes, that works! Thank you.
    A follow-up question: When audio capture is stopped, how can the client program find out when all the audio data has been written to a file on the server. The client needs to know this to perform subsequent operations on the audio file.

  • No sound was recorded when recording videos on iPhone 4

    Hi, my iPhone can't record sound when recording video, but the voice memo app still works fine. Any ideas?
    (It plays some "weeeee" sounds insteaad)

    Thanks for your reply . I've removed the cover when doing both tests I mentioned. The earphone I used is at good condition and I don't see any problem with it. I've also reinstalled the iOS as your instruction, but still no luck, the video sound still has noise.
    I've decided to export the video file to my PC to see if I can hear sound better or not, as it's hard to hear and sound except noise with the external speaker on my iPhone even at maximum volume. On my PC I had to increased playback volume to 100%, set volume booster to 300% and applied noise reduction plugin (I use Media Player Classic on Windows 7) to get an acceptable sound (still noise but better than the original). If I don't boost the volume, it's hard to hear anything. I don't expect it to be crystal clear like the voice memo (using the bottom mic), but too much noise like this is really bad.
    So I think it appears to be a hardware-related problem. I will later consider to send it to a phone repair shop or keep it and accept this bad video sound problem . In Vietnam we just have Apple authorized resellers but don't have any official Apple repair shops, that's why I'm still confused as I don't really trust those phone repair shops to handle my iPhone. Anyway, thanks again for your comment .
    P.S: it maybe a little off-topic, but do you know any video recording app that using the bottom mic ?

  • Make a audio controller file move with a pan and zoom.

    I am using a few folio overlays for a digital publication.
    I have an image that uses the pan and zoom overlay.
    I would like to add several play buttons for audio that are linked to the image so when you pan the image the audio files move with it.
    So far I can only get the audio controller file to be static and the image move under it.

    Here's a little trick for you. Before creating a scrolling frame, group the
    text frame with a small no fill/no stroke frame. Now you have group in the
    frame, you can drag additional objects in using the layers panel.

  • Lose audio when watching movies

    When I first started using ITunes and I downloaded movies they worked fine, I could watch the whole movie no problems. I think it was after perhaps the fourth movie I downloaded suddenly I started having audio issues. I'd get about 20 minutes into the movie and the audio when cut out and then go out all the way. I'd have to shut down itunes and come back about a half an hour later and I'd get another 20 minutes of the movie and then the audio would go out again. I have to do that thru the whole movie. I've done all the suggestions to fix it.....don't use the enhanced audio, reinstall Quicktime ect but nothing seems to be working.
    Does anyone have any other suggestions I might be able to try?
    Thanks
    H.

    Same problem with all headphones and earbuds--just checked settings and Volume Limit was already off--starting to think it's a volume system flaw tied to videos and related sound.   No problem getting plenty of sound volume for music, only videos. 

  • No Audio When Importing MOV into LifeType

    Hi
    I'm new to FCE and I was importing a mov file into life type. However, there was no audio when I tried playing the file. I am able to see the visual and the live fonts effects but somehow the audio is missing.
    Did I miss something ? Is this the right approach for creating a movie with LiveType effects ?
    Jojos
    P.S: The mov itself has audio when played via Quicktime.

    if I may ask for the steps I would be doing the following ?
    1. Create the titling effect in LiveType
    2. Export it to a quicktime movie
    3. Open FCE4 and superimpose it into my main movie clip
    4. Generate it as movie
    In step 2, do I render a movie or generate it as a quicktime movie? May I know what's the difference and which offers a better quality ?
    Appreciate your reply.
    Jojos

Maybe you are looking for