No Audio when recording through M-Audio Fast Track Ultra USB interface
Hi,
I am trying to record my drums using Logic Pro and by obtaining the audio through 4 microphones connected to an M-Audio Fast Track Ultra. Even though the interface is on, installed, registered, and configured in Logic's audio preferences, there is no sound whatsoever. The recording shows that it definitely picked up audio and that the sound levels were moving, but there is no playback. Any advice??
Thanks.
Are you using Logic 8 or 9?
What are you trying to hear Logic's output through?
If you're expecting audio output through built-in audio, and you're using Logic 9, make sure your Fast Track is set as the input device, and built-in audio is set for the output device (both in Logic's audio preferences)
However, if you're using Logic 8 or 7, you need to create an aggregate device if you're using built-in output.
Details here:
http://discussions.apple.com/thread.jspa?messageID=8813763�
OR
use the FastTrack's audio outputs to drive your monitoring, NOT your built-in audio.
Similar Messages
-
My Macbook Pro crashes when I plug in m-audio fast track ultra
Hey Friends
I want to know if anyone of you who use a m-audio audio interface has the problem of your computer crashing, then having to restart, when you plug it into the usb drive. It started happening to me when I upgraded to Mountain Lion, and is still doing it on Maverick. I've placed the error report below since I don't understand it, to see if someone could help me figure out why.
Thanks
Anonymous UUID: B3788E35-0826-ED52-18E9-610442B2D598
Sat Nov 23 14:13:06 2013
panic(cpu 0 caller 0xffffff80026dc19e): Kernel trap at 0xffffff7f82f2bdb6, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x000000000000093b, CR3: 0x0000000005419000, CR4: 0x00000000000606e0
RAX: 0x0000000000000003, RBX: 0xffffff801e6ed000, RCX: 0x0000000003000000, RDX: 0x0000000000000000
RSP: 0xffffff80f35abde0, RBP: 0xffffff80f35abde0, RSI: 0xffffff80f35abe20, RDI: 0xffffff801b7fd300
R8: 0x0000000000000004, R9: 0xffffff8029ee3930, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
R12: 0x0000000000000000, R13: 0xffffff80f35abe20, R14: 0xffffff801dd55f00, R15: 0xffffff80292fed80
RFL: 0x0000000000010246, RIP: 0xffffff7f82f2bdb6, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000000093b, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80f35aba70 : 0xffffff8002622f69
0xffffff80f35abaf0 : 0xffffff80026dc19e
0xffffff80f35abcc0 : 0xffffff80026f3606
0xffffff80f35abce0 : 0xffffff7f82f2bdb6
0xffffff80f35abde0 : 0xffffff7f84dfd21a
0xffffff80f35abe10 : 0xffffff7f84df7ce9
0xffffff80f35abe40 : 0xffffff7f84df83a9
0xffffff80f35abec0 : 0xffffff8002ab05fb
0xffffff80f35abf20 : 0xffffff800264a15a
0xffffff80f35abfb0 : 0xffffff80026d6aa7
Kernel Extensions in backtrace:
com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f82f1e000->0xffffff7f82f7cfff
dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f82cba000
com.maudio.usb.fasttrackultra.driver(2.2.1)[00000000-0000-0000-0000-00000000000 0]@0xffffff7f84df6000->0xffffff7f84e13fff
dependency: com.apple.iokit.IOAudioFamily(1.9.4fc11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@ 0xffffff7f82fa4000
dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f82f1e000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000002400000
Kernel text base: 0xffffff8002600000
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 35802184912542
last loaded kext at 35797006502553: com.apple.driver.AppleUSBCDC 4.2.1b2 (addr 0xffffff7f84e14000, size 20480)
last unloaded kext at 27817817981818: com.apple.driver.AppleUSBAudio 2.9.3f17 (addr 0xffffff7f84dfa000, size 303104)
loaded kexts:
com.maudio.usb.fasttrackultra.driver 2.2.1
com.paceap.kext.pacesupport.snowleopard 5.7.2
net.telestream.driver.TelestreamAudio 1.0.5
com.Cycling74.driver.Soundflower 1.5.1
com.eltima.SyncMate.kext 0.2.5b15
com.digidesign.iokit.DigiDal 9.0f4
com.rim.driver.BlackBerryUSBDriverInt 0.0.68
com.apple.driver.AppleUSBCDC 4.2.1b2
com.apple.filesystems.afpfs 11.0
com.apple.nke.asp-tcp 8.0.0
com.apple.filesystems.smbfs 2.0.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.14.11
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.kext.AMDFramebuffer 1.1.4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.AMDRadeonX3000 1.1.4
com.apple.driver.AppleIntelHD3000Graphics 8.1.8
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.driver.AppleIntelSNBGraphicsFB 8.1.8
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleHWAccess 1
com.apple.kext.AMD6000Controller 1.1.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleThunderboltIP 1.0.10
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleUSBHub 650.4.4
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.security.SecureRemotePassword 1.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOAcceleratorFamily 98.7.1
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.kext.AMDSupport 1.1.4
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleThunderboltDPInAdapter 2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily 2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.0
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.driver.AppleThunderboltNHI 1.9.2
com.apple.iokit.IOThunderboltFamily 2.8.5
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.4 GHz, 8 GB, SMC 1.70f6
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3037332E4130304C4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x0198, 0x393930353432382D3037332E4130304C4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD10JPVT-22A1YT0, 1 TB
Serial ATA Device: MATSHITADVD-R UJ-8A8
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: Fast Track Ultra
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1Hi monicaxh1,
Here is an article of troubleshooting for when your iPod does not appear in iTunes:
iPod not appearing in iTunes
http://support.apple.com/kb/ts3716
The issues you are seeing may be connected, so I would try this troubleshooting first.
Cheers!
- Ari -
Guitar "twang" when recording with macmini and M-Audio Fast Track Ultra
hey was hoping someone might have similar setup or enough knowledge to help out.
when i record guitar through my interface i get a clip after each guitar note that sounds very flangey (or like and outter-space type "twang" if that helps describe it) i was hoping it would come out a bit cleaner. and yes i have made sure no effects are turned on. its should be straight up clean guitar, and the notes preceding these clips are in-fact nice and clean. its just the milliseconds after each note that are bothering me.
my biggest issue is i don't know if its being caused by my interface or a bad setting within the program. I am using the build in preamp and plugging directly into the unit, so i'm going to get a mic and see how it sounds then.
I did a lot of research on the D/A interfaces out there and i went with the fast track ultra for the price and because the company really hyped these preamps. this is the general description you will find on sites trying to sell the FTU "4 preamps with award-winning M-Audio Octane technology"
if this noise is cause by a problem with these preamp.... im gona be POBB! i would have saved up and waited to buy and apogee product! anyone out these using an ensemble??? would love to hear some feedback about that unit! thanks in advance for any help!hey thanks for the reply! i have since adjusted a few parameters and had good luck going directly into the ftu's 1/4in jack in the front. the more i use the program the more im understanding (you can see i'm relieving my neebie side!) i have not messed much with the ftu's control program itself, is this helpful when trying to get good levels and such?
how knowledgable are you about microphones? i have a garbage mic from radio shack and when trying to record my acoustic guitar with it i really need to crank up the input on the ftu and be close to the mic to get a signal. this in turn creates that "fuzzy warm" sound that you can hear before the guitar starts playing. it's that analog sound like going through an old tube-amp or something... now while the instrument is playing its not as noticeable obviously and some people even like to add this sort of effect onto digital stuff to give it that warm feeling...
my question is- what if i want just a nice crisp acoustic recording from my mic into garageband? do i go with something that uses phantompower or what? im just so lost because i don't know much about mics (except they can get REAL expensive... saw one for 7k at guitar center by me!) well sorry for ramblings! thanks in advance for help! -
Cannot record any sound with my M-Audio Fast Track Ultra audio interface
Have been using Logic for about 3 months and was able (primarily via keyboards/midi recording) to create some decent recordings (via the 'hard' way, some books, video training and without bothering a lot of people with many of my questions). Time has come to start with analog audio recording and here my problem starts. Have recently purchased the Fast Track Ultra audio interface from M-Audio.
Drivers are installed correctly. The device is saying that it functions properly. It gets recognized by my iMAC. It gets recognized in Logic and can enable the device in my audio preferences. I can clearly see in the control panel of my USB audio interface it is creating sound and meters are going up and down.
I get sound in my head phones (which are connected to the audio interface) but within Logic no sound is coming in while with the build in microphone everything seems to work fine. Have played around all kind of settings in my audio/midi configuration utility but no result.
Who can help me out ?
Thanks in advance.
Jozef.Have done a test within Garageband and it works correctly overthere
-
No audio when recording video iPhone 6 (4.7in)
I just got my 6 and love it, but I have noticed that I have ZERO audio when recording video, but rather some feedback.
I have tried rebooting and powering off/on. Nothing has worked.
Any help would be very much appreciated. I hope my phone doesn't have an issue.
Thanks,
GeoffNevermind, I had the back covered. Silly me to think it used the same microphone on the bottom of the phone..
-
No audio when recording a movie on iMovie?
I recorded a movie of myself as an intended blog video for YouTube but there is no audio when I play it back.
I have checked System Preferences to ensure built-in microphone settings are good and they are.
I have a 2011 Macbook Pro with up-to-date software.
I found my similar posts online to mine but no answers.
Operating System 10.7.5
Thank you in advance for your help.Hi
This is a bit unclear to me.
No audio when recording
No Video-editing program I know off play any feedback (at standard settings) while recording. FinalCut is even worse that it doesn't play the sound while importing from Camera either (one need to connect speakers to the Camera-audio-out to get this)
So first - I'm not sure if You can get audio out while recording in iMovie at all.
BUT
If there is no sound - When Your captured video is played back - then the problem is more severe and I would start with.
• Trashing iMovie pref and cache files
and see if that helps.
Please - be more descriptive - so that one can do the same actions to see if Your problem is Yours only or if it is the same on more Macs.
Yours Bengt W -
No audio when scrubbing through clips
Out of the blue, i find i'm no longer about to hear the audio when scrubbing through clips either using the cursor or the left-right arrow keys. I can hear the audio find when playing the clip at normal speed, but when i scrub through the clip or play it one frame at a time using the left or right arrow keys I get know audio. This problem occurs on all sequences, even for old projects that have been edited previously where i was able to scrub through the clips. I've looked at all my user preferences and project preferences and i don't see any setting that would seem to affect the audio scrubbing. any help that you can provide would be greatly appreciated.
Thanks Didn't see that option. Much appreciated.
But it is there:-)
See the bottom of this grab:
!http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-8.png! -
M-Audio Fast Track Ultra - not getting any input!
I have been using M-Audio Fast Track Ultra to do some basic recording in GarageBand '09. I've never had a problem, but today i cannot get an audio signal to input from a mic or instrument. It seems that GarageBand is automatically setting the track recording level to zero and is greying it out. i can no longer control it. The audio OUTPUT works fine and i can use the fast track to monitor, but there is not input. btw, i tried using the built in audio on the MacBook and it works fine. is this a setting issue with Fast Track somehow? can anyone help trouble shoot this issue for me? Thanks!
futureman22 wrote:
i cannot get an audio signal to input from a mic or instrument.
have you set GB to use it:
http://www.bulletsandbones.com/GB/GBFAQ.html#selectinterface
(Let the page FULLY load. The link to your answer is at the top of your screen)
GarageBand is automatically setting the track recording level to zero and is greying it out.
http://www.bulletsandbones.com/GB/GBFAQ.html#volumesliderdisabled
(Let the page FULLY load. The link to your answer is at the top of your screen) -
Can I connect my PA to my external audio card M-Audio Fast track Ultra?
Hello
I wonder if it's able to connect my PA to my external audio card, _M-Audio fast track ultra so that I can use every input from my PA and use them in logic._
Any Ideas?
Best regards FrankenstenSo I should connect 2 guitar wires from the main outs, left and right to some of my audio card inputs and then Logic should recognize the sounds we are playing on the pa?
That should work.
Logic wont get any signal from the pa instrument if i don't press the front rear button on the audio card
That's normal. Those buttons control which jacks are active.
the sound is very low
Connect headphones to the headphones jack on the PA and make sure you're hearing a nice loud signal. You could also connect the headphones to the headphones jack on the Ultra, to check for a signal there.
There are level controls on the front of the Ultra. Try cranking them up. Also, make sure they are pushed in. When you pull them out, you engage a 20dB pad.
Also, look at the LEDs on the front of the Ultra. Are they glowing green? This means they are getting a signal.
In my PA there's two Monitors that I would like to use for logic, how would I do that?
You would connect outputs from your audio interface to inputs on the PA. You could use the channel inputs, or you could use the tape inputs. -
Hi There,
I've installd the latest m-audio driver (OS X 10.6.4 64-bit) for my new m-audio fast track ultra 8r (USB). Though it appears in my system prefs, it does not appear as an optional input in either my sound system pref or Garageband pref.
If anyone has had this problem & found a solution, I'd love to hear it.
Thanks.Mine shows up in Garageband, but there is no signal. There is signal coming into the iMac, but no sound when I play in a project. I've made all of teh adjustments to teh inputs and reinstalled the drivers twice. I don't get it!
-
Why does my computer sometimes crash when I turn on the M-Audio Fast Track Ultra? What can I do to stop it happening?
You might try updating the driver and firmware. http://www.m-audio.com/news/en_us-1376.html
-
M-Audio Fast Track Ultra 8r HELP!!
Hello
I am in desperate need of assistance.... I have been using M-Audio Fast Track Ultra 8r for some months and it has worked perfectly... only today (just when I needed it most) it stopped working when I plugged it in as usual.
It makes a popping sound and the green and red LEDs along the front panel flash respectively and it will not be found by Logic 9... or anything else for that matter.
I am running MAC OSX 10.6.6 on a Macbook pro
2.53 GHz Intel Core Duo
4GB
I remember this did actually happen once before but I simply put the original CD in and re loaded the driver from there and it seemed to work... only, that CD fell foul to a toddler and is basically knackered...
The latest drivers don't seem to be working and I have done everything I can find on here to try and solve it including...
- Downloading lastest drivers
- Different leads and ports
- Downloading latest update combos for snow leopard from apple site, and repairing disc permission in utilities
- Rebooting holding cmd-alt-P-R which apparently has something to do with resetting RAM
I am not much of a techie... I just like things to work!
Any help gratefully received... I can't afford a new interface and I have lots of work to do
Many thanks
THI ! I JUST HAVE THE SAME EXACT PROBLEM ! I DONT KNOW IF M-AUDIO HAS TO CREATE THE NEW DRIVERS TO WORK WITH OSX 10.6.6 OR IS SOMETHING GOING ON IN OUR COMPUTERS.
I HOPE SOMEONE CAN HELP US AT THIS, I REALLY NEED TO GET IT WORK AGAIN ..... ILL APRECIATE ANY HELP ... THANX A LOT !! -
M-Audio Fast Track Ultra Problem with Garage Band
GB is not recognizing my Fast Track unit. Sometimes it does, other times it doesn't. I uninstalled and reloaded drivers as well plugging it in before/after starting up, before/after opening GB. I even tried changing my USB cable. It is very erratic. Any suggestions or anyone else have similar problems?
M-Audio's Fast Track Ultra appears to have some serious issues with the drivers. The unit does not like to stay connected or communicate with your PC. See this thread on the M-Audio site http://forums.m-audio.com/showthread.php?t=1174
I would NOT recommend this product until they get their problems figured out. You quickly will pick up on the thread that M-Audio's solution to an acknowledged hardware issue is to have the customer start messing with their system to see if it corrects the problem. Then if it doesn't, you have the privilege of calling their technical support. One poor chap from Costa Rica was put on hold for 41 minutes and was still waiting. Poor guy is probably still waiting.
I have read through many of the postings and did not find one person who was able to get their problem resolved; not one. Some of the folks had incredible patience with all of the "fixes" that M-Audio staffers were tossing out. They dutifully followed all advice but to no avail. I have to admit, M-Audio must have integrity because they are showing the postings on their website. -
M-AUDIO Fast Track Ultra with Final Cut 7
I have been using an M-Audio Fast Track Ultra device with Final Cut 6 and could listen to Quicktime 5.1 audio files in the timeline in full surround. Since I installed the Studio 3 upgrade with Final Cut 7 (same OSX version), this is not working anymore. I just have stereo output. When I start my backup version of Final Cut 6, it still work fine.
Any clue how to fix this in Final Cut 7 ?Hi,
The 5.1 audio preset was already selected in the setting and each of the 6 audio tracks is assign to the proper speaker. It was the same set-up in the v6 but it was working which is not the case in the v7. There might be a new setting somewhere.
Thanks for trying. -
Is Logic Pro X compatible with M Audio Fast Track Ultra ?
I'm running Logic 8 Pro with M-Audio Fast Track Ultra.
I'd like to upgrade to Logic Pro X.
Will these components be compatible?If it has a Mountain Lion compatible driver then it should work. (Its not about LPX compatibility.. its about OS X compatibility that matters in almost every case)
See here for the drivers...
http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Ultra-Drivers
V2.2.2 is 10.8 compatible however there are several threads in their forums that indicate issues with 10.8.3 and higher...
Here is an example..
http://community.m-audio.com/m-audio/topics/driver_for_m_audio_fast_track_ultra_ mac_mountain_lion_10_8_3
Given that your interface is no longer a supported item.. and Avid have taken over M-Audio.. it might be that there will be no further updates leaving you unfortunately, with an out of date and no longer supported piece of hardware... which frankly is typical of M-Audio...
As a quick aside... This is why I stick with Motu equipment.. and have done so for many, many years now. Their support both for new and legacy devices is and has always been.. excellent.. and my original Ultralite Mk1 which is at least 7 years old now I believe, is still fully supported in the latest OS X version. using the latest Motu Drivers..
Anyhow.. Check with M-Audio/Avid to find out if this has been resolved......
Maybe you are looking for
-
HT3281 Podcasts disappeared from iTunes library and iPhone podcast app.
All of my Podcast subscriptions and content suddenly disappeared from my iTunes library and from the Podcast app on my iPhone. Checked iTunes to make sure it's running the latest version of software, and it is. Music library appears to be OK. How
-
A very disappointed returning BlackBerry user
I am back to BlackBerry from being away for a 3 years using Android devices and I am very disappointed with the lack of Apps I can find in "BB world". I wish I had checked if my apps were available before I changed to BlackBerry. I can't find Audible
-
HT201272 It doesn't let me purchase songs
I put my credit card number on the iTunes store for purchases and it still doesn't let me buy the albums
-
error windows installer package
-
Suitable Pre-amplifier for my Audigy 2
Hi there,?at present I am wanting to purchase a pre-amp to use with my Audigy 2 NX soundcard. I have tried to use my dynamic Shure microphone with the soundcard, but realised that I need a pre-amp for the mic, as the frequencies of dynamic profession