No audio when sending video clips over HDMI

When using an HDMI link (from my Acer laptop) to an A/V receiver, no audio is sent over the HDMI when using Lightroom5 to play video clips, but it works OK when playing the same clips directly from the files).
Playing YouTube videos, and tutorials, also work correctly (audio on the HDMI).
(The audio is output from the laptop speaker, and the 3.5mm jack.)
What am I doing wrong ?
Thanks,
Chris

Reply to suggestion to checking system tray: HDMI device shown and not grayed-out.
However I did find that after rebooting the laptop the sound showed up on the HDMI.
…not sure for how long of course.
Thankyou for your suggestions,
Chris

Similar Messages

  • How to extend audio from a video clip over an adjacent still image

    I'm in iMovie 11.  My project looks like this: video A, transition, still image B, transition, video C.  I want the sound from video C to start playing while still image B is on the screen.  I tried following the iMovie 11 help instructions for extending a video clip's audio.  I click on video C and open the precision editor.  From there I can grab video C and move it back so that it overlaps with the still image, but all that happens is the still image still shows up, without sound, and video clip C starts in the middle.  The help instructions seem to indicate that I should be able to drag only the audio and make that overlap the still image, but it's not happening.  Either the video and audio move together, or nothing moves.
    When I try detatching video C from its audio, I just end up with a big mess because later the audio and video don't synch up.
    What am I doing wrong?

    I am having the same challenge... any tips here would help me out in a big way. I recorded my boss tdoing a training session and now I would like to have the powerpoint slides change as necessary - but I want the audio to remain. I would love to just get the slides to change rather than back to full before bringing up the next slide. Jim, if you come up with anything, let me know. I have VC2 pro.

  • When sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

    when sending video from my iphone to apple tv it says on screen it is doing it but it wont play on tv but audio works great

    Welcome to the Apple Community.
    Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
    I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please email me details and I'll add them to the User Tip.

  • I have Aperture3 and iPhoto.  When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why?

    I have Aperture3 and iPhoto.  When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why?  Others couldn't open them so I sent them to myself and get the same message.  Doesn't seem to be a size issue as I've tried with really short clips (4 seconds).  As I recall, I didn't have this problem before buying Aperture last fall, when I only had iPhoto.  It appears that by default, an attachment to an email automatically comes from my iPhoto files and not Aperture - assume that is supposed to happen but not sure.  Thanks for any and all help!
    Jim

      When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why?
    How are you tryin to send the .AVI file? Are you sending the attachment directly from Mail or from Aperture or iPhoto?

  • Crashes, graphics glitches, and more crashes when editing video clips

    Can't for the life of me figure out why PE keeps crashing on me, so I'm here for help.
    My system consists of a i7-970 hexacore, 6GB ram, 1x 500GB os drive, 3x500gb raid 0 drives (this is where my video clips are stored), 2x GeForce GTX460 video cards.
    OS is Windows 7 Profressional 64 bit.
    The video files I work with are generally in the 50-200GB size.
    A little background - the videos that I am working with are recordings from Battlefield Bad Company 2 that I have recorded with some capture software called Dxtory.
    I record at 1920x1080 at 60 FPS to avi files.  The avi files are using the "xtor" codec (Dxtory's own codec)
    [ISFT]    DxtoryCore ver2.0.0.101
    [ISRC]    Video:YUV420 Audio:Speakers (Realtek High Definition Audio)
    Audio is PCM 192000Hz recorded in stereo.
    Let me start by saying I have not had trouble with this before until I started recording the videos at 60 FPS.  30 FPS worked ok (some crashes here and there, but they were bearable), but the frequent crashes started happening when I started working with the 60 FPS videos, done mainly so I could play around with slowing the clips down, etc.
    Sometimes I can open and edit clips just fine.
    Recently, a project that I'm working on is crashing when I try putting two different clips from different files together on the time line.  I managed to get it to work once, and saved the project after that.  Then, PE crashed randomly and when trying to reopen the project, it just crashes and won't let me get any further.
    I should mention the graphics glitches as well - occasionally (especially when previewing video clips before adding them to the timeline) after I close the preview window, the graphics in PE will glitch out, causing random lines to appear in certain areas, graphics to stack on top of eachother and freeze up, and sometimes I can click on the "play" button in the main project window and hear everything start playing, but the graphics are completely screwed up to the point where I can't view the video or hit the pause button.
    All of my computer hardware is fine, all drivers, and PE, are up to date.
    Can someone please help me figure out what is going on?  I'll be happy to provide any more information that might help out.

    The most likely issue is the codec that your program is using the create your video. It's apparently not compatible with Premiere Elements.
    This often happens also when people try to record their on-screen video with FRAPS.
    You'll see lots of discussions on this issue in the Premiere Pro forum. However, it's even more pronounced in Premiere Elements, which is designed to work almost exclusively with camcorder video.
    Some video programs are a little more versatile with this type of video. Some people have found Corell's Video Studio better at handling these non-traditonal formats.
    But I did a Google search on Dxtory editing and couldn't find any information on it.
    Sorry I can't offer a solution. But I can pretty much assure you that Premiere Elements isn't it. sorry.

  • Iphone 5S IOS8 - quality of  audio when taking video?

    The biggest disappointment with the 5S was the TERRIBLY distorted audio when taking videos of live music or loud events.  The 4S didn't feature the front mic and therefor sound was passing by perpendicular to the mic and it would not be as "hot" of a signal.
    I have not one but two external mice I use when I plan*** on taking video but living in a city with tons of music I am not always prepared with an external mic.  Taking video with IOS7 with the 5S is useless if the audio source is above 85db or so. 
    Can anyone who has upgraded IOS on the 5S confirm that they have corrected the software for the mic sensitivity for a 5S?  My buddy has the 6 and his live videos of music do NOT distort.
    Thanks!

    Hello AudioArchist,
    Does the issue of recording videos still not get any sounds? If so, take a look at the article below to troubleshoot the issue further. Now it may be hard to give the exact reason why that happened, but the article should assist with getting it fixed.
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    http://support.apple.com/en-us/HT203792
    Regards,
    -Norm G. 

  • How do I mute the audio of a video clip in PS 6

    I have video clips on several layers in the timeline and want to mute the audio of specific video clips - they are on video lines, not the audio line

    an interesting development as I proceed with the video. I guess I'm missing an integral concept here. It appears that some of my cideo clips import into the project and the segments have a blue color. These offer an option to fade in or out the audio, to mute the audio or adjust the volume.
    Other vidoe clips import purple, like the still image files, and hence these do not offer any audio options, just motion objects.
    So, what am I doing wrong? Why do some video clips import (purple) as image files?

  • TS1702 No audio when trimming a clip. Any suggestions?

    I have no audio when trimming a clip. Just got the new app imovie. Any one else having this problem? Any help would be great.

    start here with the safe mode thing
    Songs and Other Content Do Not Play Correctly

  • Replace audio in multiple video clips at one time

    Hello. I am new to the forum so I apologize if I break any of the rules!
    I have a collection of tutorial videos, all edited but the audio had some balance issues. The files were not in Premiere Pro at the time. They are the final edited videos but then I was told the audio needed to be adjusted. 
    I have re-balanced the audio, saved the audio as wav files and now I need to replace the old audio (in the finished video file) with the new audio (the wav files I edited and saved). The timing is all the same. It's just a matter of replacing the current file.
    Is this doable as a batch process? Is it doable in Premiere Pro or do I need to use Audition or some other Adobe software?
    I hope this makes sense.
    Thank you in advance!
    Alan Read
    SC, USA

    hello ,thanks for jour mail ,but my English is very very bad sorry but
    many thank for your feedback. Hav a nice Day
    Am 09.12.2014 16:57, schrieb carpmusic:
    >
          Replace audio in multiple video clips at one time
    created by carpmusic <https://forums.adobe.com/people/carpmusic> in
    /Premiere Pro/ - View the full discussion
    <https://forums.adobe.com/message/6998981#6998981>

  • Sending video clips to my phone, how?

    Can anybody help me?
    i want to know how i can send video clips from my pc to my nokia n80 via usb cable.
    Nokia pc suite doesnt seem to support this and i am confused as to what to do?

    This is the iPhone discussions.
    Export this movie as a Windows Media Player file - Export: Movie to Windows Media which will also add the .wmv extension to the exported file.

  • Trying to combine audio from a video clip with a photo

    Is there a way to allow the audio of a video clip to continue, while the visual is changed? I'm trying to insert a photo to replace the last few seconds of a video as the song in the video finishes.

    Not at the moment. Hopefully at some point they will add a feature to independently trim the audio and video to allow this type of edit, otherwise known as an L cut.
    tt2

  • Can you keep the audio of one video clip but add another clip?

    Can you keep the audio of one video clip but add another clip?
    I want to edit in other clips during an interview with a person, but have the interviewee's voice in the background?

    There are several way to do this;
    Replace with clip...
    http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d27a .html#WSA009AFF1-4D78-43cc-B60D-5B46E5ACB117

  • On iMovie how can you mute a section of the sound track so you can hear the audio from the video clip?

    .

    Hey,
    If you double-click on the soundtrack you can open it up in the inspector tab and lower the soundtrack so that you can hear the audio from the video clip.
    A great resource for finding answers to questions like this is http://www.imovietutorialhelp.com
    You can ask questions just like these and they will be answered for you. If you need a tutorial video made or anything like that, you can go there as well and ask for a video to made as well. Check it out.
    If you still have questions on how to do this, they can help you for sure.
    I may receive some form of compensation, financial or otherwise, from my video or link.

  • How to extract audio from a video clip

    I am editting a video, and I need to extract the audio from a video clip. On the old iMovie it was really easy, all you had to do was press apple K I think. Thanks in advanced for your help.

    Select the clip in the sequence.
    Then command-L to unlink the clips.
    Then select the audio and delete.
    As a suggestion, two things:
    1. Explain what you want to do. If it is delete the audio, then that is different than extracting the audio;
    2. Do a search in the pdf manual in the help manual

  • No audio when recording video iPhone 6 (4.7in)

    I just got my 6 and love it, but I have noticed that I have ZERO audio when recording video, but rather some feedback.
    I have tried rebooting and powering off/on. Nothing has worked.
    Any help would be very much appreciated. I hope my phone doesn't have an issue.
    Thanks,
    Geoff

    Nevermind, I had the back covered. Silly me to think it used the same microphone on the bottom of the phone..

Maybe you are looking for