No Audio with Flip for Mac, MIDI Settings Seem OK

Hello,
I am using Flip for Mac to stream Windows content. On most sites (You Tube etc.) it seems OK. On some however, the video plays fine, but there is no audio.
Since the video streams fine, I assume it is not a DRM issue. The MIDI Audio Input is set at 44100Hz. The MIDI Audio Output window says 'Output is not supported.' I only use the internal speakers and don't have any external ones connected to perhaps the MIDI Output is irrelevant.
But, is this more of a QuickTime7.2 compatability issue? I am only running a lower version of Flip for Mac, none of the 'Pro' upgrades so did not think it would be an issue. Are there any other common settings one should double check?
Many thanks.

Hi DG!
No, not a DRM issue, and you have set the midi-player settings correctly. For the full nine yards, try this:
These are the downloads and the setup you need in order to view/hear pretty much everything:
Assuming you already run OS 10.4.9 or above and have Quicktime 7.2, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer from http://uk.real.com/player/
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
Now repair permissions and restart.
The world should now be your oyster!
You should also have the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

Similar Messages

  • Transcribing WMA tapes and Flip for Mac message?

    After a recent upgrade to 10.9 I have had a repetitive message overlaid when I transcribe WMA tapes from a DSS player: 'this is a demonstration of Flip for Mac.' It seems to come and go though, this morning it repeated throughout a whole transcription, then when I replayed the tape the message had disappeared, but played over a tape I transcribed yesterday which was message free.
    As I recall as part of the installation of the system upgrade I was asked to remove Flip for Mac and the install it again, but that is a bit hazy.
    I have spoken with Olympus and upgraded their software for my recordning machine.
    Do I need to use Flip for Mac at all and is that a change introduced by Apple in the last system update? It is making the daily job I do of transcribing more than a little frsutrating.

    Are these tracks copy-protected (they almost certainly will be if they were purchased from a download store)? If so, then there's no way to play them in Mac OS X.

  • Can't get wmv to play even afer updating flip for mac. Test returns new box with "The operation could not be completed"

    I've tried enable/diasble plugins etc.
    Update flip for mac
    Firefox is updated
    Mac OS is updated
    Mac software is updated

    Try to update QuickTime plugin, if it is not updated, uninstall and install it again.
    see for info : [https://support.mozilla.org/en-US/kb/Using%20the%20QuickTime%20plugin%20with%20Firefox Using the QuickTime plugin with Firefox ]
    definitely see this: http://www.telestream.net/pdfs/user-guides/Flip4Mac-WMV-User-Guide.pdf
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Ouicktime 7.5 not working with Flip 4 Mac.

    I upgraded QT to 7.5 and now my QT plays the audio but no picture when running streaming WMV files. I checked with Flip 4 Mac but they said its a Quicktime issue.I'm running the latest version of flip 4 mac (2.2.0.49R). Anyone have the fix to this problem?

    Welcome to the forums Bigbadcudah.
    This won't help you, but just for the record, I have not noticed any problems at all with QT 7.5 or for that matter Flip4Mac and playing WMV files, and we are using the same OS.
    It might be worth your while checking the following for updated components:
    These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
    It is known to work in the great majority of cases with Safari 3.0.4, 3.1, 3.1.1, QT 7.3, 7.4 and 7.4.5 and OS 10.4.11.
    Assuming you already run Tiger versions OS 10.4.11 and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
    RealPlayer 11 (which is no longer in beta) for Mac from (you may need a different site for the US):
    http://uk.real.com/player/mac/
    Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
    Perian from http://perian.org/
    You should read this support page http://perian.org/#support in case you need to delete older codecs.
    Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS, but please see my footnote if you are running Leopard.)
    In earlier versions than QT 7.1.3 in Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
    You should also ensure, if you are running Tiger 10.4.11, that you have downloaded and installed all the correct version for your Mac of Security Updates up to and including 2008-003. (N.B. Security Updates require both a restart and a permission repair.)
    In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
    Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
    Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
    Important: Now repair permissions and restart.
    You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.
    There is an additional 'fix' you could try if you are having problems with Flash and Quicktime, depending on which type of Mac you have:
    On Intel Macs, make sure that you are not running Safari in Rosetta. You can check this, and change it, in the Get Info window.
    On PPC Macs, go to the Hard Disk/Library/Internet Plug-Ins folder, and drag the file 'QuickTime Plugin.webplugin' to the desktop. Quit and restart Safari. If things have improved you can trash that file. If they haven't put it back, as the lack of this plug-in can cause QT content in some widgets to cease functioning.
    And now there is an additional kid on the block: SilverLight. Microsoft has created their own version of what a replacement for Flash should be. You can read more about it here:
    http://silverlight.net/
    So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards):
    http://silverlight.net/GetStarted/
    FOOTNOTE
    If you are running Leopard:
    Some users have mentioned that the latest Flash Player (v.9.0.115.0) conflicts with Leopard, and that they have needed to revert to v. 9.0.47. This can be downloaded from here:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14266&sliceId=1

  • Flip for mac

    I have the latest version of flip for mac installed. For the last few months when someone sends a video with email when i click on play button at end of email on the video box I only get audio for the first 30-40 seconds & then the video kicks in. how can i correct this

    HI and Welcome to Apple Discussions...
    Try the 10.6.2 combo update available here.
    http://support.apple.com/kb/DL959
    It's ok to do this even though you are already running 10.6.2 The update includes Safari plug-in reliability.
    If that doesn't help try ...
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
    Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem.
    http://support.apple.com/kb/TS1594
    If you are running Safari in 64 bit mode, try running in 32-bit mode instead. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) make sure *Safari is NOT running in Rosetta.*
    Carolyn

  • XM to "any playable audio format" converter for Mac - where to find one?

    I have one .XM file, it is audio. I want to play it, but I have to convert it to something playable first. Any of you know a converter that works on a Mac?

    Chris CA wrote:
    How can it be named "sound converter" when it doesn't convert anything?
    You mean it doesn't convert your .xm file.
    It works and converts many other files.
    What is this .xm file? Where did you get it?
    See this -> http://www.macupdate.com/info.php/id/12607/cocomodx
    "CocoModX is an freeware audio module player for Mac OS X. It is capable of playing 669, ahx, ams, amf, asy, cba, digi, dsm, far, gdm, imf, it, m15, mdl, med, mod, mtm, mxm, okta, plm, psm, ptm, s3m, stm, stx, tfmx, ult, uni, umx, xm files and zipped mod files named mdz."
    This one helped! I'm recording the music with Audacity right now!

  • Syncing iCloud Calendar with Outlook for Mac (new Outlook)

    Does anyone know if it's possible to sync your iCloud Calendar with Outlook for Mac yet (Outlook for Mac is the new Outlook that comes with Microsoft Office 365)? If so, how do you do it?
    I've done some research on this question, and most of the responses are a few years old... wanted to see if anything has changed since. I find it weird how I can sync my iCloud Calendar with Outlook 2013 on my PC, but not with Outlook for Mac on my Mac--which is practically the same thing.
    Thanks ahead of time!

    Greetings kipp0606,
    If you would like to use iCloud mail in an email client, you may want to review the following article. It contains the mail server settings you'll need to set it up:
    iCloud: Mail server settings for email clients - Apple Support
    Use these mail server settings if you need to manually set up your email app (client) to use an iCloud email account. 
    Do you need these mail server settings?
    You can use the mail server settings in this article to manually set up your email app to send and receive email with an iCloud email account. However, you shouldn't need to do that if you meet the iCloud system requirements and can use any of these setup methods:
    OS X Lion v10.7.4 or later: Use iCloud Preferences.
    Microsoft Windows with Microsoft Outlook 2010 or later: Use iCloud for Windows.
    iOS 7 or later: Use iCloud settings.
    If you're using the Mail app in OS X Snow Leopard v10.6, use the mail server information in the iCloud Mail setup instructions for Snow Leopard instead of the settings below.Mail server settings
    Refer to your email app's documentation for information about how to use these settings. iCloud Mail uses the IMAP and SMTP standards supported by most modern email apps. iCloud does not support POP.
    IMAP information for the incoming mail server
    Server name: imap.mail.me.com
    SSL Required: Yes
    If you receive errors when using SSL, try using TLS instead.
    Port: 993
    Username: The name part of your iCloud email address (for example, emilyparker, not [email protected])
    Password: Your iCloud password
    SMTP information for the outgoing mail server
    Server name: smtp.mail.me.com
    SSL Required: Yes
    If you receive errors when using SSL, try using TLS or STARTTLS instead.
    Port: 587
    SMTP Authentication Required: Yes
    Username: Your full iCloud email address (for example, [email protected], not emilyparker)
    Password: Your iCloud password
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • I'm actually trying to watch some of apples clips for the ipad .... i keep gettin a " missing plug in " message ....i've tried update flip for mac , also adobe flash  etc .... nothing seems to work .... any comments ... advise ...considerations ???

    I'm actually trying to watch some of apples clips for the ipad .... i keep gettin a " missing plug in " message ....i've tried update flip for mac , also adobe flash  etc .... nothing seems to work .... any comments ... advise ...considerations ???

    Flash Player Protected Mode provides a modern, sophisticated set of security protections that we see as critical in today's security landscape. 
    We highly recommend that users not disable ProtectedMode.  Also, it's worth noting that by manually changing your mms.cfg, you have opted out of Protected Mode for all future versions of Flash Player, as we will continue to honor that preference. This puts your system at risk, and that risk will continue to grow over time. 
    Ultimately, this is an issue with the RealPlayer Browser Record plug-in.  There is a more technical explanation in the Mozilla bug referenced above in the thread, but the simplified version is that the security enhancements designed to prevent the introduction of malware via Flash Player make RealPlayer Browser Record plug-in no longer compatible with Flash Player for Firefox.  You can disable the record functionality to eliminate this issue, while retaining the ability to view both Flash and Real Player content.
    To disable the Real Player Browser Record functionality while maintaining the enhanced security provided by Flash Player with Protected Mode, do the following:
        Launch RealPlayer
        Click the RealPlayer icon in the upper-left corner of the window, and choose Preferences
        Choose Download & Recording from the left-hand menu
        Uncheck "Enable Web Download & Recording for these installed browser"
        Click OK

  • Send Issues with Outlook for Mac (2011 / V15) and Exchange 2013 SP1

    Hi all,
    we have a strange issue with only with Outlook for Mac Users (version 2011 and the newest Outlook Version (V15) from Office 365) connected to our Exchange Server 2013 SP1. Some emails which we send out to the exactly same recipient are not sent through our
    Exchange Server. 
    We have sent 8 emails with subject "test1, test2, test3...". Only test 3-6 was arriving to the recipient. The other emails are in the "sent" folder but it was not sent out through the Exchange.
    What we can see with "Get-MessageTrackingLog" is, that the Recipients and MessageSubject are empty for these emails:
    Timestamp Sender Recipients MessageSubject
    25.02.2015 16:48:52 [email protected].. {}
    25.02.2015 17:04:43 [email protected].. {}
    25.02.2015 17:08:25 [email protected].. {[email protected]} test 3
    25.02.2015 17:08:56 [email protected].. {[email protected]} test 4
    25.02.2015 17:09:38 [email protected].. {[email protected]} test 5
    25.02.2015 17:09:38 [email protected].. {[email protected]} test 6
    25.02.2015 17:13:45 [email protected].. {}
    25.02.2015 17:13:55 [email protected].. {}
    We can still reproduce the issue on different Mac computers.
    Thanks for any help in advance!
    Thanks and best regards
    Reto

    Here is the mailheader form the successfully sent email:
    Date: Wed, 25 Feb 2015 17:08:25 +0100
    Subject: test 3
    From: sender <[email protected]>
    To: "'[email protected]'" <[email protected]>
    This mailheader is from an email which was not sent out:
    User-Agent: Microsoft-MacOutlook/15.6.0.150113
    Date: Wed, 25 Feb 2015 16:48:52 +0100
    Subject: test 1
    From: sender <[email protected]>
    To: [email protected] <[email protected]>
    Interesting: Only the not received messages contains User-Agent string and have some quotation marks missing in the To field.

  • I'm too old to learn iCal.  How do I tell iTunes to synch with Outlook for Mac for all of the Contacts and the Calendar on my iPhone and iPad??  Thanks

    I'm too old to learn iCal.  How do I tell iTunes to synch with Outlook for Mac for all of the Contacts and the Calendar on my iPhone and iPad?? 
    Also, once I figure out how to replace iCal with Outlook/Mac on iTunes, how do I synch the phone and pad so that the information on those devices over-writes onto Outlook as a backup, rather than having a blank Calendar on Outlook wipe out all of the information on the phone and pad???
    Thanks

    If you haven't tried already, plug your devices into iTunes, and on each device next to the "Summary" tab at the top is another tab called "Info." Click that and scroll down to Contacts, Calendars, etc. There should be a pull down bar under each category for "Sync contacts from..." and you should be able to select from that pull down list Outlook.  Hit Apply at the bottom and see if that does it.

  • Problem with facetime for mac

    hello guy! I've got a problem with facetime for mac.My sister has a I-pod touch fourth generation with factime but i cna't phone her a message come on my mac.It say "xxx can't receive facetime's calls"!Can you help me??

    Thanks, Dah•veed.
    I did see mention of using Google Public DNS while I was searching the forums prior to posting, but to be honest didn't think it was a DNS-related problem.
    However, to rule it out I've set the prefered DNS servers on my router to Google's, but FaceTime still disconnects after 4-5 seconds when calling between me and my brother-in-law.  It doesn't matter who initiates the call.
    As a test, before I made the changes to my router, I logged into FaceTime as him on my MBP and tried calling myself on my iMac, and that was successful.
    The same test between the two iMacs when they were here was unsuccessful, so now I'm definitely thinking it's something on the '08 iMac.
    Now I just need to figure out what...

  • Problem with Twitter for Mac notifications

    Hello,
    I have a strange problem with Twitter for Mac. On both my home and office Macs. New posts appear in app window but there aren't any notifications even though notifications are set in preferences to show in both dock and menubar. Perhaps anyone noticed similar strange behaviour? I didn't find anything similar on Twitter forums.
    Thanks in advance.

    Solved by
    Dr.AvituvOct 20, 2014 11:09 PM
    go to Terminal and post this:
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/support/lsregister -kill -seed
    if it doesn't have that specific directory try this:
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -seed
    once the scanning is done (can be short or long, depends on how heavy your system is) RESTART the computer.
    when you're back, go to Apple>system preferences>extensions.... guess who's there.
    I hope it helped.
    The Doctor.
    iMac, OS X Yosemite (10.10)
    To restore Actions extensions for good and other stuff
    THANKS!

  • Does OS Lion need flip for mac

    new IMAC OS LIon 10.7.3  - can't seem to find out if it needs 'flip for mac'?

    Only if you wish to view .wmv files, otherwise it's not really needed.

  • Best phone for syncing with Office for Mac 2008?

    I'll be getting a new phone in a few months and I want to get one that syncs perfectly and effortlessly with Office for Mac 2008.
    I currently use a Motorola Q and a Macbook Pro and have to go through isyncing Office with the Mac versions (iCal and Address Book) and then syncing using Missing Sync. It works, but it's slow and not very elegant.
    What's the smoothest solution?
    - Mike

    Just be careful if you use categories in Entourage for your mail, calendar and contacts and determine whether those categories will move with your contacts and other data to the iPhone when it syncs. I doubt that it will if sync services works the same way between Entourage and iCal because it doesn't support the category capabilities in Entourage which is why people had turned to Missing Sync for the 2004 version of MS Office 2004
    FWIW
    Ben

  • Does Lion work with Office for Mac?

    Does Lion work ok with Office for Mac? I have the latest version of Office for Mac, but it is the cornerstone of my working life and I would hate to upgrade and find that it doesn't work.

    Yes, Office 2011 works perfectly on Lion.  Only versions 2004 and older have a problem as Rosetta is no longer supported.
    I hope this helps.

Maybe you are looking for