No audio with .mts files in cs6

I don't have audio with .mts files problem is in bridge too i ve AE CS6 with latest updates. /in cs5 everything was ok/

What MTS files from where? What are your audio prefs in AE? What system are you running on? Did you check the audio panel? So many questions....
Mylenium

Similar Messages

No audio with MTS files

I have a problem with my audio in Premiere Pro. My files are MTS, and the video works fine. There is just no audio. I use a Canon XA10 camera.

Hi Michael,
If you have not already done so, import these files via the Media Browser, not File > Import or by dragging to the Project panel. Once imported, allow some time for the audio conforming to complete. Report back after you have done so.
Thanks,
Kevin

After Effects stopped reading audio from .mts files

So a long time ago I used to work fine with .mts files. but the other day I shot some footage with a Canon vixia HF S100 camera and when I imported it to After Effects CS6 it doesnt import it with the audio, only video. I checked out the levels and does not appear anything. Also in the top left corner when you select an imported footage it kinda tells you the description of it and it doesn't say anything about audio.
(doesn't happen with other kind of files though, everything else plays audio and video normally)
any idea what could have happened?

Either you changed the recording settings on the camera or, which is more likely, you screwed up the CoDecs on your system or something with your audio hardware. Uninstall any CoDec packs, reinstall AE, check your audio prefs in AE and on the system...
Mylenium

Why is the audio not working in Prelude or Bridge with .MTS files?

There is clearly something buggy with Prelude and Bridge (CS6) on .mts files. I changed one test file from .mts to m2ts and ithe audio works. This however is not a easy workaround since I have thousands of .mts files. Any thoughts, suggestions, updates? thanks

I don't know if you need and answer anymore. But I had the same problem with premiere. I have tried to duplicate the conditions but now it alwasy works.
After trying awhile and opening and closing CS6 I noticed that when you start a new project. Above the Name you enter, It says capture format and it was set to DV. I clicked on it and there was the option HDV.
Since my footage is HD I chose that and when I dragged and dropped my file there was sound attached,
Another time it happened, So I took a look at the 2nd screen that comes up that I usually hit cancel on. And saw the AVchd Folder Icon.
I clicked on it
And I picked the format I would use. For Me it was 1080p 24
I clicked okay. There was a sequence indicator in the source files but I ignored that and dragged and dropped my file into the project box. I got video and sound that way, Now for whatever reason. I don't have to do any of those things for the file to have sound,
I think they mention it here but there is another post that says to be able to use markers on MTS files you need to either copy the file directly from the source or copy the entire AVCHD directory in what ever file you store videos,
That means keeping your SD card or Camera Hard drive clean so you don't import the same clips over and over.
I have been playing with Prelude but I am not sure if I as a one man show doing simple little movies need it.
Speedgrade looks more useful and I am learning that,
I don't know if this is helpful or too late to be helpful but I just figured it out recently.
Barry

FCPX 10.1.3 something wrong with audio in .MTS file

Hi,
I've just update from FCPX 10.1.1 to 10.1.3.
I've reported something wrong when i import .MTS files (from my Sony VG30). There are lot of audio paradise. If i listen to the file on another computer there are no problem, but when it was imported in FCPX, it appears. Also with optimised and proxy files.
If i export a project, the parasite still present.
If i first rewrap the .MTS files with ClipWrap, then the file imported in FCPX don't have any problem.
For sure, i don't have that kind of problem in FCPX 10.1.1
Some other user with that ?

Yep, i know that method is better, anyway i can't always do that cause i also received directly .MTS file and not the physical SD Card, or should backup the files on a server before import it on my Mac and start the new project.
I've checkup an imported file i've made with 10.1.1 and played in 10.1.3 and there aren't any bug files, so it's seems to be linked to 10.1.2 or 10.1.3 update : (

No sound imported with mts file

I've a paid subscription version of CS6. I'm trying to import an mts file but no audio will show in the timeline panel. This worked perfectly yesterday. I can preview in bridge with no problem. I can play back with vlc player no problem. What's going on

Sorry my friend. I did not mean to insult your intelligence in any way. I'm on Lynda.com a lot. Just did the one on updates to CS6 Premiere and I've been working professionally in the industry for over 20 years. Sorry I can't help much with this issue.
I am wondering from other posts I've seen, if the problem is with third party cards, AJA, BMD, Matrox, etc, even the CUDA cards. Don't know if you use these. Our CS6 Premiere is only on a MacBook Pro at the moment, so none of the third party concerns and it's working fine with AVCHD, ProRes, HDV. I did have one file go offline, but easily relinked it and all it good. All the best!

No audio for MTS files in PE9

I'm running Premiere Element 9 (registered version) on Windows 7 X64.
I have some exsiting MTS files on the hard drive (they are from Canon HF20 camcorder).
If I play those MTS files in Windows Media, everything was fine. I got video and audio.
But when I create a project and put those files in the project, I got video only. There's no audio.
For troubleshooting purpose, I install Premiere Pro (CS5) and VideoStudio (from Corel). Both of them worked fine with audio. So it looks like the problem is specific to Premiere Element only.
I've gone through the thread http://forums.adobe.com/thread/731032?tstart=0. But couldn't fix the problem.
Any hints would be appreciated!
Michael

Thank you very much for the info.
I removed the Media Cache and Media Cache File folders. Didn't seem to make any difference. Also, there's no audio if I try to play it in Organizer.
I have a question regaring "import". What exactly does that mean?
Since all my MTS files are on hard drive already, what I did was:
1) Open a new project in PE9.
2) In the "Organize" tab, click "Get Media"
3) Choose "Get Videos/Photos/Audio from: Files and Folders".
4) In the pop-up window, navigate to my folder and choose the existing MTS file.
Was that called "import"?
Thank you again!
Michael

Premiere Elements 9 : no sound with .mts files

I'm having a bit of a problem getting my mts/avchd files to work with PE9. I imported the files using the organiser, and they play fine (video AND audio) from the organiser, but when I import the clips into PE9, only video is imported. There's no audio track and (logically?) no audio to be heard. How do I fix this?
Mind, these .mts files play fine in both the organiser AND windows 7. They're created on a Canon HF100 camcorder.

I do not know if there is a "Getting Started" tour of PrE offered now, but there should be, and in big, bold print, there should be a first message, that explains the necessity of matching the Project Preset exactly to the source footage. Next, the tour should go into how to determine the attributes of the source footage to a Project Preset. If there is not such a "tour," I feel strongly that there should be.
I believe that PrE 9 has added a feature that helps one match source footage to a Project Preset. In PrPro CS5, one would just drag one of the source videos to the New Icon, at the bottom of the Project Panel, after Import. This then creates a new Sequence (think mini-Project within a "master Project"), with the exact specs. required.
Many new users are unaware of the above necessity, and then are confounded by a whole list of Presets, that often do not make a lot of sense - yet. Probably a good 20% of all program problems trace back to a mis-match between the Project Preset and the source footage.
As for mixed format/CODEC footage, the best way to handle that is to either convert secondary set of footage to match the primary footage, for which the Project Preset has been established, or to do separate Projects, each matching their source footage 100%, and then doing an Export/Share to a format/CODEC, that matches the primary footage. Then, one can easily combine all of the footage into a single, new Project, or Import the Exported footage into the Project with the primary footage for final editing.
Good luck,
Hunt

No sound in Premiere Pro with .mts files

Hello,
when i import .mts files in Adobe Premiere Pro. There is no sound, why? I can import other other video files, like .mp4 and there is sound.
Please Help!
Premiere Pro detects the most settings false, it said 25p but i recorded with 50i and 1080i

There is Audio in my files, the files are produced by an Sony Legria HF S10. I can play the sound with vlc Media Player, but in Premiere Pro CS 5, they said in the file is no sound!
Other files, like .mp4 had a little speaker on the clip, but .mts files not!
I used the Adobe Premiere Pro CS 5 German Trial.

MTS File Import CS6

I have read through quite a few discussions on this, but I have tried many things and am really stuck right now.
Just finished a 3 camera wedding and the wide locked down cam was a Canon camcorder(Vixia HF M301) shooting 30(60i) AVCHD
When I import the files in the media browser to the project, everything is fine all the way from 00000 - 00035. 00036 is correct, but repeats itself through 00039.
00040 appears to be correct but repeats itself through 00046.
I have tried using media browser and file import methods and also dragging the clips directly onto the timeline. I have tried multiple methods of importing the private folder and directly with the file. The windows directory shows a matching XMP file with every clip which Premiere CS6 doesnt seem to recognize.
I had experienced something like this once on an older Canon camcorder using a hexidecimal file numbering system.
This is the reception section and since this cam ran for all most all of eve, I need it to sync audio with two other cams. I guess an option would be to re-encode providing that media encoder will recognize them correctly,and provided they would match relinking them, if not I am in deep doo-doo.This is a fresh project, and I have even tried to import them into CS5.5 to no avail.
Any thoughts or suggestions?
Thanks

Jim after a very long and frustrating day I finally managed to get it to work per your suggestion. I have always been diligent about copying all of the folder structure and making backups with my cards. I shoot GH2's and haven't had to deal with spanned files.
I had read your instructions earlier today while researching, and every attempt I made at getting to the file at the bottom of the directory, the view as AVCHD was grayed out. Just now cleaned the caches and dumped the prefs and made a fresh project, and was able to get view as avchd to work for the first time. Very happy right about now, and looking forward to editing tomorrow! Thanks so much!

Help with .MTS files

Hi all
I am sure this has been asked many times, but I really know very little at all about video files and have tried a few things already.. but my lack of skill / understanding isn't helping!
I have some .MTS footage filmed at uni that I need to very simply edit (cut and join different clips). I brought the .MTS files home on my memory stick as I thought, yay, iMovie time! When iMovie didn't recognise the files, I thought I'd have a go with FCPX trial version, which I thought was bound to be able to handle them, as surely such flashy software can handle HD stuff... Alas, no, and I'm gutted.
I have tried to convert my files to .mp4 (seems to be the main option in free converters) but I lose a lot of the quality, they look dreadful. I don't mind losing *some* quality, but these looked totally yucky.
So I wondered if someone might help me understand how to get these .MTS files into FCPX (as I'd really like to try the software out now it's here!). I would try importing direct from the camera, but 1. I left the camera at uni this weekend and 2. I deleted the original files, thinking I'd be fine to, as I have copies in about 3 places. Gah!
Any tips that a simpleton like me can follow would be much appreciated. Sorry if this is a question brought up all the time!
Sam

general advice:
Avoid ANY converter, which converts 'orphanized' mts to h.264 - that's a (very) lossy process.
Why?
Because, mts IS h.264!
so, two-and-a-half options:
• use a converter, such as ClipWrap, able to convert straight to FCPX' intermediate format proRes
• use an un-wrapper, like free Rewrap2M4V, to 'unpack' the mts into a mov (rename resulting suffix)
• or, try Panasonics free AVCAMRestorer which claims to re-establish a fully functional AVCHD-structure, which allows FCPX to trigger its own import-routines with your mts

Color correction with .mts files

Hi,I´m editing .mts files in premiere pro, but I want to do the color correction in a diferent program, but since must of the programs don´t support mts files, what would you recomend? after that, I want to get back to premiere to finish my worflow, but I don´t wan´t any compression, any advice? I would love to correct in Da Vinci..

YOu want to color grade this in DaVinci...which doesn't support .mts...but you don't want to recompress the footage into something that DaVinci will work with? You don't want ANY compression? Not possible...if you want to go to DaVinci. You will need to compress to something it recognizes, and then guess what? You will compress again when you render out of DaVinci...but if you send ProRes or DNxHD the recompress won't really have any degredation.
or use Speedgrade...

Premiere Pro CC 2014 hangs - Problems with MTS files?

Hello all,
So I've read the other MTS file posts on here about problems importing. I had this issue initially but moved the folder and it worked.
I got into my project and every now and then I would get this lagging, where Premiere Pro would still play, but the cursor would be frozen, and anything I click on wouldn't highlight... can't scroll etc. This seems to happen when the fan in my mac kicks up.
It has gotten to the point now where I can't edit the project at all because this happens about 3 minutes in each time. Works fine for a few, then fan kicks up and everything starts lagging and freezing. What's weird is I found a part on the screen, that if I click it, the screen updates to what I just did. SO WEIRD.
THIS DOES NOT HAPPEN ON ANY OTHER PROJECT. And this project isn't even that big. So I highly doubt it's a computer performance issue as I've worked on RED RAW and Prores 4444 files on my macbook pro (which I'm on now) with no issues.
Long story short I've tried about everything, and feel the only solution is to transcode to prores and start all over with the edit (which would be brutal) but I've already completed so much work! Does anybody have experience with this or a work around?
Thanks!

Hi Kevin,
Thanks for responding.
I was given a drive with the RAW files on them. I originally just used finder and dragged and dropped into Premiere, since that's what I've always done... but since the issue I'll start using what you mentioned.
Did NOT update the project. Started it on CC 2014.
I tried importing the sequence into a different project and the same issue is occurring. But below I've given more info as to my problems. I'm really concerned I'm going to have to start it all over again. I recently transcoded all files to Prores 422 (hq) in case that's what I need to do. But I'm really hoping there's something I can do to resolve this. Though I have a feeling it's the .MTS files causing issues.
What version of Premiere Pro?
Premiere Pro v8.1.0
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
OS X 10.9.5
What kind(s) of source footage?
AVCHD... I went about "show package contents" until revealing the .MTS files.
What were you doing when the problem occurred?
Editing. Noticed in the beginning, but as the sequence as gotten longer the problem became more persistent, until now it's ALL THE TIME... and the computer fan kicks up right away like it's struggling with playback.
What other software are you running?
Shut down all other programs so Premiere is just running. Still happens. All other projects have been working fine but this is the first with .MTS.
Do you have any third-party effects or codecs installed?
No.
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
None.
Are you using Mercury Playback Engine GPU Acceleration?
Yes.
Does the problem only happen with your final output, with previews, or both?
Everything. Screen lags and freezes with anything. It still plays back without interruption, but my cursor won't move, windows won't update, I can't scroll anywhere unless clicking the top part of Premiere (then it magically updates what I did a moment ago).
Help!

Layer Pallet issues with CS5 files in CS6

Opening Illustrator CS5 files in CS6 causes the visibilty icons, layer names, and layer thumbnails to disappear from the layers pallet. Objects are still there as are the layers and sub layers but I am unable to identify them in the layers pallet (see screen shot of CS6 panel and CS5 layeers panel). Have tried changing Panel Options. Have also tried changing the file names which it lets me do but disappear as soon as I leave the pallet. Also have tried pasting into a new document with "paste remember layers" but they arive in the new document the same way. The only thing that seems to work is pasting one layer at a time into a new document, and naming it at that time. This also provides the layer thumbnail. This is not a small issue as I have thousands of CS5 files which I will need to work with.
I am on a iMAC, running OS X 10.6.8

Try turning off the "Do not print" for this layer
Do you have the Verdana italic font properly installed on your machine?

No auido with .mts files

I import my .mts file. It plays in the Preview. I have NO audio.
I have tried every option in the "Audio Hardware" , still nothing.
I have used converters, to convert to "ipad/iphone", I get audio.
Any ideas?

More information needed for someone to help... click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
Read Bill Hunt on Audio Conforming http://forums.adobe.com/thread/726693

No audio with .mts files in cs6

Similar Messages

Maybe you are looking for