No authorization error in BW report

Hi ,
when I am trying to run a report in BW , its giving an error like,
"you dont have authorization to read the object"
how can i solve this problem ? please help.
Regards,
Ryan.

Hi Srinivas,
thanks a lot for your reply.
can you tell me whether there is any settings to be done in CRM system regarding the authorization in BW ?
Waiting for your reply.
Regards,
Ryan.

Similar Messages

No authorization error in Bex report

Hi
When i open an workbook i get the selection screen and when i select values and execute i get an message" warning you dont have sufficient authorization"
When i click close button on the message the work book opens up but with out output (values) instead i get you dont have sufficient authorization. I checked in for authorizations in Su01 and su53 every thing looks fine.
NOte: I was able to open this report couple of days back
Can someone help me out in this issue?
Thanks a lot
Sheetal

hi,
who's assigned the role to you. he is having the authorization rights to change these and all. please check out with that. if you having the rights to modify means go to your role change the authorization. otherwise contact your role head.
if helpful provide points
regards
harikrishna N

Error while Connecting report Best Practices v1.31 with SAP

Hello experts,
I'm facing an issue while trying to connect some of my reports from Best Practices for BI with SAP.
It only happens when it's about info sets, the other ones that are with SAP tables go smoothly without a problem.
The most interesting is I have already one of the reports connected to SAP info sets.
I have already verified the document of steps of creation of additional database that comes with BP pack. They seem ok.
Here goes what Crystal Reports throws to me after changing the data source to SAP:
For report "GL Statement" one of the Financial Analysis one which uses InfoSet: /KYK/IS_FIGL_I3:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: It wasn't indicated any variant for exercise (something like this after translating) - click ok then
- Database connector error: RFC_INVALID_HANDLE
For report "Cost Analysis: Planned vs. Actual Order Costs" one of the Financial Analysis one which uses InfoSet: ZBPBI131_INFO_ODVR and ZBPBI131_INFO_COAS; and also the Query CO_OM_OP_20_Q1:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: check class for selections raised errors - click ok then
- Database connector error: RFC_INVALID_HANDLE
Obs.: Those "Z" infosets are already created in SAP environment.
The one that works fine is one of the Purchasing Analysis reports:
- Purchasing Group Analysis -> InfoSet: /KYK/IS_MCE1
I'm kind of lost to solve this, because I'm not sure if it can be in the SAP JCO or some parameter that was done wrongly in SAP and I have already check possible solutions for both.
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

I re-checked step 3.2.3 - Uploading Crystal User Roles (transaction PFCG) - of the manual where it talks about CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER roles, I noticed in the Authorizations tab that the status was saying it hadn't been generated and I had a yellow sign, so then that was what I did (I generated) as it says in the manual.
Both statuses are now saying "Authorization profile is generated" and the sign is now green on the tab.
I had another issue in the User tab (it was yellow as Authorizations one before generating)....all I needed to do to change to green was comparing user (User Comparison button).
After all that, I tried once more to refresh the Crystal report and I still have the error messages being thrown.
There's one more issue in one of the tabs of PFCG transaction, it is on the Menu one where it is with a red sign, but there's nothing talking about it in the manual. I just have a folder called "Role menu" without anything in it.
Can it be the reason why I'm facing errors when connecting the report to SAP infoSets? (remember one of my reports which is connected to an infoSet works good)
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

Procurement Coordinator received Authorization Error when creating Bid Inv

Hi All,
In SRM I have an issue Please help me in solving this. Please see below
Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit. Message states u201CMissing Transaction BBP_BID_EXTSOu201D; however Bid # is still created. User requests that Authorization issue is resolved and Bid # appear for Procurement Coordinators. This problem does not happen for Commodity Managers

Hi
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Authorization Errors from BEx queries

We are developing Crystal reports on top of BEx queries. We are working on BO XI 3.1 FP2.8, Crystal Reports FP2.8 and SAP Integration Kit FP2.8 and SAP BW is BI 7.0 Suppport pack 5.0. How can we display the Authorization errors that are returned on BEx queries on the Crystal reports.
If i run the Crystal reports and if it comes back empty, there can be 2 reasons one no Data and second no proper authorizations. We want to display a mesage to users to tell them the report is empty either becaus of no data or Authorization error.
Thanks,
Venkat

Thank you Ingo. Is there any work around where we can get the return code to a temporary KeyFigure and use that.
Regards,
Venkat

'No authorization' error for selection values outside the authorized range

Hi All,
We are currently trying to use the authorization analysis concept for 'Cost center reporting'.
We have made 0COSTCENTER info-object as authorization relevant and have created a analysis authorization object for it through RSECADMIN and we have maintained a single value as '1875' . We have assigned this object to 1 of the test users.
So now if the user runs the report for cost center '1875' , he is able to view the data/report. Now if he enters any other cost center apart from '1875' than he gets an authorization error (Everything works as per requirement till this point).
But now if the user enters multiple cost centers like 1875, 1876, 1877 as multiple single values and runs the report, he gets an 'No authorization error'.
So all the experts, please let me know if it's possible in anyway for the user to see the result/report for the value he is authorized to (in this case - 1875) and should give an information/warning/error message saying that he is not authorized to other cost center (in this case - 1876, 1877).
Same thing is occuring if user enters a range. Suppose a user is authorized for cost center - 1875 to 1880. Now if he puts multiple single values or range in between the authorized range than he can see the result but if he enters even 1 single value outside the range he gets an error - what I mean by this is - if the user enter a range from 1875 to 1801, he does not get any data display but instead he recieves an error message saying 'No authorization' even though he is authorized for all the cost centers in that range except 1801.
I would really appreciate your help regarding this. Any comments/suggestions are very welcome.
Thanks & regards,
Sunny

Hi Sunny
That is the way analysis authorizations work!!
If you ask for a number of values i.e. cost centers and you don't have authorization to *all* of them you will get a system error as you say.
There is no way of partially evaluating the query as you suggest (only for the authorized values).
Try to be less restrictive when defining characteristic values in RSECADMIN.
In queries use variables with
Processing by Authorization and Input Ready.
So the system will tell the user which are the allowed values. In your example the system suggests the range 1875-1880.
Hope this helps, regards
Germá

Unable to access or view data with no authorization error

Hi Experts,
Appreciate your guys help. I am ID administrator where by some of our user ID unable to view data/ display report for the some of data even the appropriate authorization already assigned to the user. However when we check in the transaction SU53 - authorization checking no error shown!
There is a case whereby user report that his ID (e.g. SAP ID = ABC) unable to access a transaction or infotype data for example HR infotype masterdata,upon checking there is no authorazition error (checked insu53), when copy the ID (ABC) to another new ID (ABC1) with no changes on the roles, the ABC1 ID able to access the said transaction.However, when copy back ABC1 to the ABC (naming conversion only), the ABC ID still unable to access the transaction with no authorization error. the
main problem here is the original ID is not working, but works fine if it is copied to another ID name.
Kindly advice.

Hi Manikya Raju,
Can you explain details?

No authorization error in BI7

Hi
Recently we had migrated to the new authorization concept in BI7 after that, when the business users open an query or workbook they get the selection screen and when they press F4 on company code info object (Authorization relevant object) to select values they get an message" you dont have sufficient authorization" and the out put does not get displayed. but as an BW developer i am able to open the same report without any error
I checked in for authorizations in Su01 and su53 every thing looks fine for the business user.
Note: This error occurs only to queries having infoobject company code
Can someone help me out in this issue?
Thanks a lot
Sheetal

Hi sheetal,
I am facing the same problem what you have faced regarding authorization error in BI queries.
when users try to open the workbook, select their options in selection screen and run it, they get warning 'you do not have sufficient authorizations'. when i try to run the same, i am able to open it. this is happening in prod.
how are you able to solve this problem.

Component Extension for EHSM 3.0: Authorization Error

Hi,
I have installed Component Extension for EHSM 3.0 and its business package in EP 7.3.
Some of the links like report incident are throwing authorization error:
The user has all the roles assigned to him in the backend. Can you please help me fix this issue?
Regards,
Kapil.

Check the componet extention 3.0 sec guide:
https://websmp203.sap-ag.de/~sapidb/012002523100014084142012E/EHSM_3_Security_Guide.pdf

Installed FSCM 9.2 Demo w/ tools 8.53 on OEL 6, Oracle DB, Booted Web/App/Prcs ok, but error "Authorization Error -- Contact your Security AdministratorAuthorization" on page

Installed FSCM 9.2 Demo w/ tools 8.53 on OEL 6, Oracle DB, Booted Web/App/Prcs ok, but error "Authorization Error -- Contact your Security Administrator" on page. Has anyone encounter this issue. I have done most of the usual troubleshooting already.

Hi,
Roles linked to users are stored table psroleuser.
When I run following sql statement in my FSCM 9.2 demo env for user VP1, it returns 95 roles.
select * from psroleuser where roleuser = 'VP1';
And my environment is a ootb demo installation.
Here is an export of my config that you can try to load in your env, but something has definitely gone wrong for your env.
For a list of PeopleTools Security tables have a look at following blog
PeopleTools Security - PeopleSoft Wiki
REM INSERTING into psroleuser
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ADS Designer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PTF Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PTF Editor','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PTF User','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Search Query Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PeopleTools','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Catalog Partner','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','CC_ADMINISTRATOR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','CC_USER_PO','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','CC_USER_REQ','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','CLAIMS_MGR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','CLERK','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','XMLP Power User','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','VMI Manager','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','XMLP Report Developer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_EXPENSE_APPROVER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_INV_APPROVER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','EOEN_USER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ePro Buyer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ePro Admin','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Search Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Search Developer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Search Server','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','IT Asset Manager','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ITEMLOAD_CONTACT','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','MANAGER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PAPP_USER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PBM User','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PeopleSoft User','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','EMPLOYEE','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Employee North America','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Ent Utilities Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','EOPP_USER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Event Buyer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Event Seller','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Forecaster','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Grants Super User','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','EX_EMPLOYEE','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','MIN Adminstrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Connected Queries Developer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PeopleSoft Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Integration Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Supplier Contract Interested','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Supplier-Application Admin','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','UPG_ALLPNLS','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','UPG_APPSRVR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','VICE PRESIDENT','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','System Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Treasurer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','EOTF_ADMIN','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ProcessSchedulerAdmin','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Project Owner','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Grants Workflow By Pass','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Inventory Policy Planner','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','CONSUMER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','DEALING MANAGER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PivotGridAdmin','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PTLT_IMPLEMENTER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PTLT_INTERNAL_APPS','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Translation Utilities','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ADMINISTRATOR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','AM_SS_ACCOUNTING_CLERK','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','PTLT_PROJECT_MGR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','RE_ADMIN','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Security Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SETTLEMENT_MGR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_ADMINISTRATOR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_APPROVER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_COORDINATOR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_EXECUTIVE','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','RE_SUPER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','EOTL_Admin','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_INVOICE_MANAGER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_PLOG_APPROVER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_PROVIDER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_PROVIDER_CONTACT','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_REQUESTER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_TIME_APPROVER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SP_WO_APPROVER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','SUPERVISOR','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Supplier Contrct Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Demand Planner','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Employee','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Plan Approver','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Portal Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','ReportSuperUser','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','AM_SS_MANAGER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','App Developer','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','BAM Administrator','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','BANK MANAGER','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Budget Approver','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Call Center Agent','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Call Center Specialist','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Cash Manager','N');
Insert into psroleuser (ROLEUSER,ROLENAME,DYNAMIC_SW) values ('VP1','Catalog Administrator','N');

Authorization error while attaching document in ME22N

Hi,
Scenario 1: I attach a document in ME22N and then save it. Result: I get an authorization error.
Error is: "You have no authorization for extensions (activity03)"
Scenario 2: I just make a change (say in price) without attaching any document and then when i try to save it. Result: There is no authorization error.
Message (output) type in both the cases is EDI.
On further investigation, we found the authority-check abap statement which is responsible for throwing the error.
authority-check           object authority_obj_edi_deftool
            id 'EDI_TCD' field authority_tcode_edi_deftool
            id 'ACTVT'    field pi_activity
            id 'EDI_DOC' DUMMY
            id 'EDI_CIM' field pi_cimtyp.
This statement gets executed for both the scenarios and with the SAME variables but it throws error in case of scenario 1 only.
Following are the values of the variables in BOTH cases:
authority_obj_edi_deftool = S_IDOCEFT
authority_tcode_edi_deftool = WE30
pi_activity = 03
pi_cimtyp = Z2ORDERS02
Any help is appreciated.
Regards,
Chinmay

Dear,
Kindly contact your basis team. it will help you.
Please give him SU53 screen short for his reference.
Regards,
Sandip

FRM-92101 error while running report from a button or menu

Hi All,
I am getting the error FRM-92101 while running report without parameter from a button or menu. I am using Developer Suit 10g. I get the error as it shows there has some configuration problem in my form. Will you please help me anyone how can i solve the problem. My previous forms running very well both with parameter and without parameter.
Arif

Hello Sir,
Thanks for your cooperation. I have solved my problem by myself. The fact was that, when i tried with the following code which made my report---
SELECT br.bid, br.bname, br.branchtxnstatus, dif.difference
FROM branch br,
(SELECT gladbrid branchid,
SUM
(CASE
WHEN ga.gl_acc_categry IN ('L', 'I')
THEN gd.gladbalance
ELSE -1 * gd.gladbalance
END
) AS difference
FROM glaccount ga, glaccountdetail gd
WHERE ga.glid = gd.gladglid
GROUP BY gladbrid) dif
WHERE dif.branchid = br.bid AND br.branchtxnstatus = :Br_Status
and dif.difference!=0
ORDER BY br.bid;
and the code against the button or menu item is---
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('ASSET');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
which has shown the error FRM-92101 and didn't run the report.
In that case I have changed the query to run the report. first of all i create a view following the query and build the report using a simple select query. that's etc. my report running fine now.
It is mentioned that there had no error on my codes.
Arif

Error while generating report in RAR

Hello,
We are getting error while generating reports in RAR.
RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
or cannot see details ,
gives error cannt be displayed.
Thanks,
DK

Hello,
we had same issues, this happed because the disk was full.
Please check with your basis team if the disk is full.
Thanks,
Prasant

Failed to commit objects to server. Error while publishing reports from BW

Hi,
I am getting below error while publishing reports from BW to BO.
"0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
Anyone having any solution for this. Thanks in advance.

Hi Amit
It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
Thank you:-)

Authorization Error on Peoplesoft Login Page

Hi, this is related to the previous project we are still working on.
Invoking a Java Method from Peoplecode
While we have found that our approach have been successful in Dev and Test Environments, once we migrated the changes to Production, it seem to have stoppped working. Our client wants to test the link from Test Environment and would Single Sign On to the Production environment. But we are getting this eror, Authorization Error -- Contact your Security Administrator on the Peoplesoft login page when the link is clicked from the Third Party website.
The node setup for Dev, Test and Prod environments under Node Definitions are using PSFT_CR as the default local node and are all working when ping'ed. The defaut user that is used for allowing public access in the Web Profile are setup'ed just the same in all three environments, and application/web servers have been restarted as well.
One thing we noticed is that the url of the third party website is http and the url for the PS prod is https. Could this be the one causing the error, or have we missed something on the setup.
Again, we appreciate your insights regarding this.
Edited by: Jeremy Leung on Jul 9, 2012 11:50 PM

Hello,
Have you tried the steps suggested by
Imtiaz Hussain in the
previous thread you queried ?
Is the error the same that you were previously encountering ?
Regards,
Neelesh.

No authorization error in BW report

Similar Messages

Maybe you are looking for