No Authorization Error message while displaying plan data in the layout

I am trying to execute laypr01 layout in planning area 4EXP0001(Delivered Content). I am getting a NO AUTHORIZATION error message. When I went back to SU53 and I can see that all authorizations have been successful.
Can somebody please let me know if I am missing something?
Thanks for your help.
Latha

Hi Latha,
Run transaction RSSM, go to authorization check log, enter your user. Try execute the BPS layout again, and get the error message.
Then go back to RSSM, and display the Trace by clicking on Trace > Display, and it show you what the authorization problem is.
Hope this helps,
Frank

Similar Messages

ORA-12705 Error Message while trying to connect to the DB

A colleague of mine has been trying to connect to the DB through PL/SQL Developer. The error message returned is :
ORA-12705: invalid or unknown NLS parameter value specified
Checked the registry for NLS_LANG which is set to NA. I did that because the ORA message references the NLS_LANG parameter. However, I doubt that is the problem. Went about to create a new TNS Name entry through Oracle NET Manager and get the same Error Message while performing the TEST function.
Any clues ? I am clueless at this point.

This can occur with any NLS_ environment variable of registry value.
Your assertion ' the ORA message references the NLS_LANG parameter' is incorrect.
You can set NLS_TERRITORY, NLS_DATE_FORMAT etc, etc, etc.
The order of precedence is environment variable, registry, Oracle provided default.
To find out what is going on set every NLS related environment variable to the empty string.
In sqlplus
select * from v$nls_valid_values
will show you what can be set,
This error will also occur when you installed the software with English as the only language.
SQL developer doesn't use tnsnames.ora
The new tnsname entry has nothing to do with it.
You have an incorrect environment variable or registry value somewhere
(in HKLM\software\oracle)
Sybrand Bakker
Senior Oracle DBA

Error message while displaying a Workbook in Portal

Hello,
We have a Workbook with 5 Queries in ech sheet. When we open the Query from Portal it displays the error message that
1. Query was changed! Characterisitc no longer exists
2. Invalid filter on CUST_SD: Filter changed
I opned the Workbook directly from Analyzer and it did not display the error message.
Thus it seems to be a change required in Portal side or may be some property of the Workbook.
Please let me know your opinion to fix the error.
Regards,
Nitin S.

Can you define "sometimes" a bit more?
Is it after a number of runs of a report?
Is it on a particular report?
Is it after you do certain operations on the report (paging, zooming, dill down, print, etc., etc.)?
Can you duplicate the issue if you isolate the report to a new test app?
Did you happen to notice if the issue existed prior to FP 3.5?
Is this on your dev computer or a client computer?
OS?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Error message while editing a hierarchy using the Web UI

Hi everybody,
I´m testing the MDS with SQL Server 2012
When I´m editing hierarchies with the Web UI, for instance, draging and droping one item into another category, I´m getting the following error message:
The item is correctly
reassigned to the new category but the users are not happy when they recieve this kind of error messages. My task is to determine if this is a known bug or a problem with my settings.
This is the complete error message:
"System.NullReferenceException: [Arg_NullReferenceException]
Arguments:
Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See
http://go.microsoft.com/fwlink/?linkid=106663&Version=5.0.20125.00&File=mscorlib.dll&Key=Arg_NullReferenceException
   at Microsoft.MasterDataServices.Client.View.UserControls.EntityMembersDataForm.IsCurrentMemberReadonly()
   at Microsoft.MasterDataServices.Client.View.UserControls.EntityMembersDataForm.UpdateStaticFields()
   at Microsoft.MasterDataServices.Client.View.UserControls.EntityMembersDataForm.MemberDataForm_ContentLoaded(Object sender, DataFormContentLoadEventArgs e)
   at System.Windows.Controls.DataForm.OnContentLoaded(DataFormContentLoadEventArgs e)
   at System.Windows.Controls.DataForm.OnContentRootElementLoaded(Object sender, RoutedEventArgs e)
   at MS.Internal.CoreInvokeHandler.InvokeEventHandler(UInt32 typeIndex, Delegate handlerDelegate, Object sender, Object args)
   at MS.Internal.JoltHelper.FireEvent(IntPtr unmanagedObj, IntPtr unmanagedObjArgs, Int32 argsTypeIndex, Int32 actualArgsTypeIndex, String eventName, UInt32 flags)"
Any help will be appreciated
Im using IE 9
SQL Server Version Detail:
Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) Oct 25 2013 19:04:40  Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)

How did you load it into iDVD?
The recommended way is to
1) in iMovie, use the Share menu to SHARE/MEDIA BROWSER in Large Size.
2) Open the Media Browser in iDVD (at lower right) and drag in the movie you just shared.
3) Set up any menus and such and burn your DVD.
Is that what you did?

Error message while activating Planning Area in S&OP on Hana

Hi,
While activating my new created planning area, I am receiving the below error. Can you please help and guide me what could be the issue ?
Exception raised from InternalError: dberror(CallableStatement.execute): 129 - transaction rolled back by an internal error: [129] SAP_SFND.sap.sop.sopfnd.catalogue::SOPDM_ACTIVATEPLAREA: line 898 col 2 (at pos 8757): [129] (range 3): transaction rolled back by an internal error: transaction rolled back by an internal error: [129] SAP_SFND.sap.sop.sopfnd.catalogue::SOPDM_PLANSESSION_XML_CNSTR: line 1274 col 2 (at pos 8682): [129] (range 3): transaction rolled back by an internal error: transaction rolled back by an internal error: [129] SAP_SFND.sap.sop.sopfnd.catalogue::SOPDM_PLANSESSION_TABLE_CNSTR: line 125 col 2 (at pos 6123): [129] (range 3): transaction rolled back by an internal error: duplicate column name: T99CUSTDESCR: line 1 col 351 (at pos 350) at ptime/query/plan_executor/trex_wrapper/trex_wrapper_body/trex_query.cc:808
Thanks in advance for your help.
Regards,
Chandan

Hi Aditya,
Please see below the screen shots of MDT and PA.
Regards,
Chandan

No error message is displayed while deleting an attendee from a course.

Hi Experts,
Mu customer is facing problem while trying to delete an attendee from a course under Training and event management. The path he is following is right:
1) In PSV1(Dynamic Attendance Menu)the employee is seen firmly booked in
a course.
2)Right-click on his name and select cancel
3)Click the dustbin to remove
But nothing is happening, neither the employee is getting moved from the course nor any error message is displaying giving us any indication of what can go wrong. Can you please suggest what can be the possible problem?
Strangest thing is, this problem is occuring only for one employee.
Thanks and Regards,
Toa

Hi Manoj,
Thanks for your reply.
That is the problem, no error message is showing. When the delete button is pressed, neither the attendee is getting deleted nor any error message is displaying as of why the deletion is not occuring.
FYI: The employee is not locked.
Thanks,
Toa

Deletion marked material should give error message while creating proc ord

Hello,
i had marked the material for deletion through T-code MM06 & saved.
Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.

Yes Brahman is Right,
Check the followig..
Go to OMCQ and change the message category to E- Error message instead of W- Waring message in Message no M7 127, but
not M7 121.
and check it,
Regards,
Pavan idlur.

Warning to error message while creating a SC

Hi,
How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
Thanks and Appreciate your inputs.
Regards,
RK

Use the BBP_DOC_CHECK_BADI.
1. Get the backend message with a getmessage* FM.
2. Check if it's a closed cost center warning.
3. Add your own error message (can be just a copy of the message you retrieved) as an 'E' error
Because this is a backend warning, you can't influence it in SRM with the message control in SRM unfortunately.
Regards,
Robin

Error Message while creating connection pool

Hi all,
I got the following error message while creating connection pool for the
SQL Server thru the Application Server Admin Console.
The message is,
An error has occured.
Operation 'create.Jdbc.ConnectionPool' failed in 'resources' Config Mbean. Target exception message :
JdbcConnectionPool Already Exists: cannot add duplicate.
But the connection pool for the SQL Server was not there in the list.
What may be the possible reason for this error.
i was trying to deploy a BMP entiy bean using the Sun Application Server.
Prior deploying i just tried to create connection pool and test the connection using the Admin Console
Please help me by providing a solution.

Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe

Warning to Error Message while creating Shopping cart

Hi,
How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
Thanks and Appreciate your inputs.
Regards,
RK

Hi Richy,
The cost centre which you have maintained is locked for postings. Try to change the cost center and the warning message should be gone.
If you still want to chnage the message from warning to error,you can do in SPRO-->img->SRM->SRM Server -> Cross app basic settings->message control -> Influence message ctl.
If an entry doesnt exist for this message in SPRO,make an entry in view BBPV_PDMSG (Tranx: SM30).
See these related threads for more pointers:
Re: Error Messages in BBP_PD
Re: How to change an error message to a warning message in SRM
Re: Where can I change type of message BBP_PD 083 from warning to error
BR,
Disha.

Error Message while adding Item in Item Master Data- [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting the nvarchar value 's008 01' to data type int. (CINF)

Dear Experts
I am getting the following error message while adding item in Item Master data. I have modified the following SBO_SP_transactionNotification in SQL server after that could not able to add the item
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20),                      -- SBO Object Type
@transaction_type nchar(1),               -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int                       -- Result (0 for no error)
declare @error_message nvarchar (200)           -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
--    IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
-- Select the return values
select @error, @error_message
end

Hi Rathna,
Just put the SP like this, without the -- before the IF. A -- marks the line as a command therefore you need to uncomment and it will work.
IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
Hope it helps

Prb display error message while creating PR at ME51n in ME_PROCESS_REQ_CUST

Hi All,
I have this requirement to check the cost center availability in PR screen (ME51n).
If cost center in the Account assignment tab is not empty, display error message and not able to create the PR.
With my code below, it doesn't triggered the error message and PR created.
Could anyone help?
METHOD if_ex_me_process_req_cust~process_account.
DATA: w_account_ref TYPE exkn.
w_account_ref = im_account_ref->get_data( )
IF w_account_ref-kostl IS NOT INITIAL.
MESSAGE e303(ME) WITH text-001 w_account_ref-kostl text-002.
ENDIF.
ENDMETHOD.
Thank you.
SW

Hi,
You have to use definition MMPUR_MESSAGE 'E' ME 303 text-001 w_account_ref-kostl text-002.
This will throw the error during check and save instead of message e303(me) .
Hope it helps.
Sujay
Edited by: Sujay Venkateswaran Krishnakumar on Oct 5, 2010 2:54 PM

Error Message While Saving Data : ORA-00372

Hi,
I am Getting this Error Message while Saving the data from frontend.
ORA-00372: file 5 cannot be modified at this time
ORA-01110: data file 5: '/db/d401/CHG_arsystem_01.dbf'
Thanks.

This might be the case when DBA is trying to make tablespce read only and some transaction is waiting for commit read only command is in hang state.
Check with your DBA to know the datafile status.
Dilipkumar Patel.

While trying to import photos from my Canon 5D markIII, iPhoto displays an error message which says unreadable format and the following files could not be imported. Please advise???

While trying to import photos from my Canon 5D markIII, iPhoto displays an error message which says unreadable format and the following files could not be imported. Please advise???

the screen shot does not display (a Forum bug ) and if it did it does not answer the questions
Seriously we can not see you and if you refuse to answer simple questions we can not help
Need information to help
what version of iPhoto? Is OS X 10.8 as you state correct for the OS? Has it ever worked? What has changed since it worked? Will Image Capture ( in your applications folder) import the photos? How are you importing - USB to the camera? USB card reader? built in card reader?
Any other clues that would help a total stranger who can not see you or your computer assist you?
LN

Short dump while displaying cube data in production

Hi Folks,
I'm getting a short dump while displaying cube data in production, please suggest
Thanks and Regards
Santhosh

Hi Santosh,
I'd suggest to follow as per SAP Note: 568768 - Analysis of SQL Errors causing Shortdumps or Error messages. The Note contains precise steps to analyze such an ABAP dump.
cheers
m./

No Authorization Error message while displaying plan data in the layout

Similar Messages

Maybe you are looking for