No authorization for administration
Dear all,
I have received a demo licence for E-Commerce / Web CRM. It is working correct, except for the administration part. I get a message that I don't have the authorization.
With kind regards,
Wim Kleinsman
Dear Bryce,
I have found the problem. The solution is: set default.aspx as standard document in the properties in IIS.
Thanks for your help, anyway!
Kind regards,
Wim.
Similar Messages
-
Required Authorization for BI Administrator
Hello
I would like to know, what kind of authorization is required for a BI Administrator on ECC 6.0. I'm keep gettting ERROR as
Source system DEVCLNT510: No authorization for remote activation of DataSources
Also, I don't have access to RSO2 transactions in ECC system as well. Is there any standard Authorization Objects that I neeed access to on the ECC side ?
Thanks for your help
BIHi,
For Remote activation of datasources from BI system, you need authorization object S_RO_BCTRA.
When you get some authorization issue, immediately call transaction SU53 and you get the authorizaton needed.
Regards,
Murali. -
Problem with Authorization for Planning folder
Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
we are not pulling the data from any other server, all the data is on the sif any one has faced the same issue let me know.
Regards,
AbrahamCalling Thru Trans code: BPS0 in ECC 6
getting this error:
Error while calling up RFC
Message No. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"An error occurred during the receipt of a complex parameter."
after i check in bw trans code:st22
Following this error message:
Category Internal Kernel Error
Runtime Errors PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC
Short text
An error occurred during the receipt of a complex parameter.
What happened?
During a remote function call, an error occurred while converting
a complex parameter.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
An error occurred during the conversion of a complex parameter. -
Problem with Authorization for BW BPS planning Folder
Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
if any one has faced the same issue let me know.
Regards,
AbrahamHI ,
I Checked it out we dont have that cube in our system.
Regards,
Abraham -
Error on executing See Also search - no authorization for resource
Hi there,
i have installed TREX 6.1 SP 13.
It searching fine but only two bugs - 1)when i'm clicking on "See also" link in search result page - i'm getting error:
"Search Failure
Error on executing See Also search - no authorization for resource
An unexpected severe error occurred during the search call. If the situation persists, inform your system administrator."
2) when i'm clicking on "HTML version" - sometimes i'm getting "No valid content found in store" error message, but it depends on index.
Any ideas?Hello Kwong,
thanks for responce. Only that i have in log is:
#1.5#000F20F6A8BD006D000000060000253400040016981EA972#1125996948354#com.sapporta
ls.wcm.control.util.search.SearchSessionBuilder#sap.com/irj#com.sapportals.wcm.c
ontrol.util.search.SearchSessionBuilder#Administrator#41230####04c0c6201eb411dab
6f0000f20f6a8bd#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain###Error
on executing See Also search - no authorization for resource#
Moreover, i'm working under administartor with all rights. -
Authorizations for user db2 sid after systemcopy with DB2 V9.7 on AIX
Hello,
I made a homogenous systemcopy from the system PRD to ENT with an redirected restore. I had the following system environment:
AIX 5.3 TL10 SP1
DB2 V9.7 (without any fixpack)
After the restore and the recovery were finished, I was able to start the database manager and to activate the database.
I tried to execute a script for cleanup some tables according to the systemcopy guide but I got the following SQL messages:
SQL0551N, SQL0552N for the user db2ent. I checked the authorization for this user and got the following information:
db2 => get authorizations
Administrative Authorizations for Current User
Direct SYSADM authority = NO
Direct SYSCTRL authority = NO
Direct SYSMAINT authority = NO
Direct DBADM authority = NO
Direct CREATETAB authority = NO
Direct BINDADD authority = NO
Direct CONNECT authority = NO
Direct CREATE_NOT_FENC authority = NO
Direct IMPLICIT_SCHEMA authority = NO
Direct LOAD authority = NO
Direct QUIESCE_CONNECT authority = NO
Direct CREATE_EXTERNAL_ROUTINE authority = NO
Direct SYSMON authority = NO
Indirect SYSADM authority = YES
Indirect SYSCTRL authority = NO
Indirect SYSMAINT authority = NO
Indirect DBADM authority = NO
Indirect CREATETAB authority = NO
Indirect BINDADD authority = NO
Indirect CONNECT authority = NO
Indirect CREATE_NOT_FENC authority = NO
Indirect IMPLICIT_SCHEMA authority = NO
Indirect LOAD authority = NO
Indirect QUIESCE_CONNECT authority = NO
Indirect CREATE_EXTERNAL_ROUTINE authority = NO
Indirect SYSMON authority = NO
db2 =>
The user db2ent was/is in the group dbentadm and the group dbentadm is configured as SYSADM:
SYSADM group name (SYSADM_GROUP) = DBENTADM
SYSCTRL group name (SYSCTRL_GROUP) = DBENTCTL
SYSMAINT group name (SYSMAINT_GROUP) = DBENTMNT
The only solution was to grant the authorizations with an other user to db2ent.
For the restore I created an new instance with the following command (as user root):
/db2/ENT/db2_software/instance/db2icrt -a SERVER_ENCRYPT -s ESE -u db2ent db2ent
I set the correct DBM configuration and created an empty database as user db2ent with the following command
db2 create db ENT on /db2/ENT
The restore was executed with db2 -tvf restore_prd.clp as user db2ent.
Is there a bug in the db2 software or is there any other solution? I did not changed the environment for the user db2ent.
The authorization concept has been changed in DB2 V9.7
http://www-01.ibm.com/support/docview.wss?uid=swg21385801
Kind regards,
ChristianHello All,
I finished restore using redirect method, but i did not know about this security issue.
Now I tried creating db2<oldsid> user and tried granting dbadm secadm priv.
but i get this error
db2 => GRANT DBADM to USER DB2P60
DB21034E The command was processed as an SQL statement because it was not a
valid Command Line Processor command. During SQL processing it returned:
SQL0707N The name "DBADM" cannot be used because the specified identifier is
reserved for system use. SQLSTATE=42939
Please help me.
I need a solution at the earliest possible.
Thanks,
Sree -
No authorization for backgroung user for log deletion
Hello,
I have included program SBAL_DELETE in a process chain in order to delete expired application logs periodically. But it doesn't work because I get always this message from backgroung monitor: "You do not have authorization to delete all these logs".
If I run program manually via SLG2 it works correctly.
The background user has profile S_BI-WHM_RFC.
Can anybody advice what am I missing?
Thank you.
BranislavHi Branislav
For the administration processes that are bundled in a process chain, you require authorization for authorization object S_RS_ADMWB.
To work with process chains, you require authorization for authorization object S_RS_PC
Check this link
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Regards,
Naveen -
HR authorization for Display the documents in SAP DMS
HI experts,
We want to control display authorization depending on the entry made in object link tab in DMS( DOcument Management System). We developed screen for HR master object link. When user executes cv03n and enters document No. system should check hr master number entered in object link. If the user has authorization for that hr master number in PA (personnel administration), then he should be allowed to display the document. Otherwise it should restrict him to display the DIR.
Now my query is how to achieve it. Can anybody provide me some solutions
I have one solution, whenever user enter document number in cv03n screen, system will first check hr master number entered in object link and it will check the Personnel Area, Employee group and employee subgroup aginst this hr master number. Say for ex: PA:1000, EG:1 and ESG:01 for HR number xyz.
Now system should check in roles assigned agaist user id for these PA, EG and ESG values. If user has got authorization for PA:1000, EG:1 and ESG:01 in HR roles,then he should allowed to display the document.
Now my query is how feasible this approach? is this tough task for abaper? or is there any easier approach than this.
regards
shamHi,
Try to use the User Exit: CNEX0002.
Check with your ABAP er for the enhancement.
Hope it helps..
Thanks!!! -
No authorization for changing Customer Centrally- Idoc in Error Status 51
Hi Experts,
We are implementing MDM for one of the client.
The client runs a modification scenario in MDM for Customer Master.
He modifies a customer record in MDM and this record is transfered from MDM to ECC via PI through Idocs.
We are using standard Idocs for Customer Master which is DEBMDM
There are 2 Idoc's generated in ECC by PI from DEBMDM as DEBMAS and ADRMAS.
ADRMAS Idoc is succesfull in ECC and the corresponding record is modified.
Now the issue is that the corresponding DEBMAS Idoc goes into Error 51.
The Error details is as below:
No authorization for changing vendor Centrally
Message no. F2326
System Response
You cannot access the requested data.
Procedure for System Administration
If necessary, include an entry in the user's authorization profile for
the authorization object and parameters specified below.
Authorization object:
o F_KNA1_APP
Parameters:
o Activity: 02
o Application authorization : *
We gave the respective authorization object to the RFC User ID used in PI RFC created to connect to ECC.
Also we have given the user id Tcode authorization like XD01/02/03.
But this error still persists.
Request to throw some light on this.
Cheers
DhwaniCheck these threads
[Re: IDOC STATUS - 51 " IDOC HAS TEST STATUS|IDOC STATUS - 51 " IDOC HAS TEST STATUS";
[Error Inbound IDoc - Status 51|Error Inbound IDoc - Status 51;
thanks
G. Lakshmipathi -
UWL : User J2EE_ADMIN has no RFC authorization for function group SYST
Dear All,
When I am trying to register the system in universal Worklist Administration, It gives the following error,
System <>: Fri Jul 11 18:58:11 IST 2008
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorExc eption:Fri Jul 11 18:58:11 IST 2008
(Connector) :com.sap.mw.jco.JCO$Exception:User J2EE_ADMIN has no RFC authorization for function group SYST.
I have tried by giving the role SAP_ALL to J2EE_ADMIN , then also i am getting the same error. Can anybody through some light on this....
Helpful tips will be rewarded...
SanojSanoj,
check these threads
https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5489621
https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5267551
https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5636365
reward points if helpful -
User CRYSTAL has no RFC authorization for function group BDL5
I am getting this error. Can anybody help.
T:40527 Error in program 'boe_cmsd': ======> User CRYSTAL has no RFC authorization for function group BDL5.
T:40527 Error in program 'boe_cmsd': <* RfcReceive [3] : returns 3:RFC_SYS_EXCEPTION
T:40527 Error in program 'boe_cmsd': <* RfcCallReceive [3] : returns 3:RFC_SYS_EXCEPTIONPlease post this query to the Business Objects Enterprise Administration forum:
BI Platform
That forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Ludek
Edited by: Ludek Uher on Sep 29, 2008 8:38 PM -
Query: no authorization for multicube
Hello,
my issue: a user wants to start a query via RRMX and gets the error message: u201CYou donu2019t have the authorization for multicube xyu201D.
I have checked the roles for the user and found the authorization object S_RS_COMP (field RSINFOCUBE, value *). That is, the authorization was defined. When the user starts another query (based on another infocube u2013 no multicube) there is no problem.
In the SAP help documentation I have found how to get a protocol from the authorization check (SAP easy access -> BIW -> authorization -> reporting authorization). But I donu2019t have the menu SAP easy access -> BIW -> authorization.
We have BI 7.0 (SAPKW70017), but we still use the u201Coldu201D authorizations.
Can anybody help? Which authorization object is missed?
Thanks in advance!Hi Anton,
I had checked the ST01 before. There where no results. A colleague mentioned that ST01 is not working correctly sometimes if you donu2019t restrict the user. That was the problem. Now I have the missed authorization object, it is S_RS_MPRO.
But I think the explanation in SAP-help is not correctly. It is an authorization object for the administration workbench, but in reality it is used in BEx. Furthermore it is mentioned that you CAN use this authorization object additional to S_RS_ICUBE. But in reality it is not a CAN it is a MUST obviously.
Thanks! -
*NO AUTHORIZATIONS FOR CREATING ACCOUNTS IN COMPANY CODE*
HI
NO AUTHORIZATIONS FOR CREATING ACCOUNTS IN COMPANY CODE
SYSTEM MESSAGE:
No authorization for creating accounts in company code 3333
Message no. F2305
System Response
You cannot access the requested data.
Procedure for System Administration
If necessary, include an entry in the user's authorization profile for the authorization object and parameters specified below.
Authorization object:
F_KNA1_BUK
Parameter:
Company code: 3333
Actions: 01
KINDLY THROW UR IDEASHi,
You have not been authorized for this transaction. Please speak with your BASIS guy he will give you the authorization.
Regards,
Abhee. -
No authorization for printer "LOCL"
Hi ,
I have Support role for my USER.
Iam trying to schedule a process chain in Background. so it will ask for "OutPut Device name" . i given LOCL
Then its given a message : No authorization for printer "LOCL" .
then i run the SU53 TCODE to see the log details :
Authorization check failed
Auth. Obj.S_SPO_DEV Spool: Device authorizations
Object Class BC_A Basis: Administration
can anybody tell me why this has happened.
Thanks,
AgniHi ,
From SU01 find out user profile attached to the user .
Goto PFCG -> Put user profile there -> Change authorization data -> Include object manually -> Put S_SPO_DEV and put enter->Here specify printer user can access . Save profile .
Hope that helps.
Regards
Mr Kapadia -
"" No authorization for number range object type GTIN and activity SHOW ""
While creating number range in number range administration for GTIN system showing the error
"" No authorization for number range object type GTIN and activity SHOW ""
Pls help me to solve this issueHi ,
Please check roles for user assigend as [ This is for super administrator ]
SAP_AIN_ADMINISTRATOR
SAP_AIN_OER_ADMINISTRATOR
SAP_AIN_SUPER_ADMINISTRATOR
SAP_AIN_SUPERVISOR
SAP_AIN_WORKER
and profiles assgined as
SAP_ALL
SAP_NEW
Hope it will helps
Thanks .,
V.Rangarajan
Maybe you are looking for
-
Customising Discover plus for olap UI
Hi all, I'm using Discover Plus with an OLAP data source and would like to customise the interface such that: - The Query Pane window is switched on by default - When creating a new report the "crosstab" radio button is highlighted by default (usuall
-
Update termination record found in SM13 - material document posting error
Hi All, A record was found in SM13 relating to missing material document and accounting document. When 'update header' button is clicked in SM13 selecting that record, the resultant pop up shows report name SAPLZ2K_MB_BUS2028. And when 'update status
-
HT4528 THE Itunes store app will not open
when i touch the app it open and closes right back up! any help
-
Hi , AP Workflow system is currently setup to timeout after 2 days. Maximum timeout is twice. I have the feeling the timeout includes weekend days. - Can you please let me know if setup to include weekend days can this be changed? I would like for it
-
Two Questions -- Ipod Export Fail and Wmvs
Hey there, New to quicktime on windows, got two questions. First, when I try to export for the IPOD default setting, I get the error -2147023174: an unknown error occured. Second, is there any way to play WMVs in Quicktime on a PC? Flip4Mac is obviou