No Authorization for release process error for Purchase requisition App.

We have configured a custom workflow for the purchase requisition and we are getting following error while:
You have no authorization for a release process
You have no authorization for a release process [GBAPP_APV_MSG/017] (error)
No exception text available [/IWBEP/CX_MGW_BUSI_EXCEPTION] (error)

Hi Masa,
I have the same problem, I did the test to run a workitem from SAPGUI inbox and works well.
The strategy is defined correctly, but continue with the error.
2015-03-27 17:36:21 The following problem occurred: HTTP request failed400,Bad Request,{"error":{"code":"GBAPP_APV_MSG/017","message":{"lang":"es","value":"Not authorized for release process"},"innererror":{"transactionid":"551461B844396C12E1000000B52A6013","timestamp":"20150327201237.8762600","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/017","message":"Not authorized for release process","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"","propertyref":"","severity":"error"}]}}} - 
Please your Help.
Regards,
Francisco.

Similar Messages

  • The Prerequisites for releasing process order

    Hi all,
    What are the Prerequisites for releasing process order?
    Can we issue the material against process order, if it is on CRTD status?

    Hi,
    Prerequiste for REL of Process Order -
    Process order should have CRTD status.
    Other with IMG setting, you can have order status directly REL once it is created also. See Prod Sch Profile setting.
    You cannot do goods posting (GI and GR) unless order is REL status. Not possible with CRTD status.
    Srini

  • Pl find out the reason for VC Cycle error for vendor 105191

    I had checked entire cycle of  Valuation Class(MM42),  Tax Code(ME12), validity period, MC Code
    in the contract as per the proforma invoice 12738 for vendor 105191  -  VC Parties, found ok.
    Pl find out the reason for VC Cycle error for vendor 105191
    " Unable to create consignment commision - FI/CO"
    " Interface : inconsistent FI/CO line item data"

    I've used the CS6 AUTOMATE|PHOTOMERGE command many times.  Today I ended up with the Error 22 message.  After reading your message I did a search on my Win7 Pro 64 bit machine and got a number of hits for "scriptingsupport.8li". 
    1 for CS6 (on my machine)
    2 for CS5 (no longer on my machine)
    2 for Elements 8 (no longer on my machine but I DO have Elements 10 & 11 on it)
    2 for CS# (no longer on my machine)
    QUESTION:  Should I delete some of these and which?  Will deletion(s) suffice?

  • Hi, we are a small clinic that uses the iPads for therapy. If we purchase an app for one iPad, can all of them download the same app at no additional cost?

    Hi, we are a small clinic that uses the iPads for therapy. If we purchase an app for one iPad, can all of them download the same app at no additional cost?

    Allan was somewhat incomplete in his statement. While technically it would be possible, from a licensing standpoint you need one license for each iPad unless those iPads were all going to be used by the same person (which I think unlikely given your described use). Here are the relevant terms of the iTunes Store agreement (emphasis mine):
    "(ii) If you are a commercial enterprise or educational institution, you may download and sync an App Store Product for use by either (a) a single individual on one or more iOS Devices used by that individual that you own or control or (b) multiple individuals, on a single shared iOS Device you own or control. For example, a single employee may use an App Store Product on both the employee's iPhone and iPad, or multiple students may serially use an App Store Product on a single iPad located at a resource center or library. For the sake of clarity, each iOS Device used serially by multiple users requires a separate license."
    So you would legally need to purchase one copy of the app for each iPad, something which would require an iTunes Store account for each iPad. For normal purchases, each iTunes Store account would need an associated credit card or prepaid iTunes card.
    The Volume Purchase Plan works similarly - you still need one license and one iTunes Store account for each iPad - but the purchasing is centralized so you don't get billed multiple times. You get one recemption code for each license you purchase. See:
    http://www.apple.com/business/vpp/
    Regards.

  • Is there a link between ASCP released planned order and purchase requisition?

    Hi,
    i'm new to EBS. would like to know is there some kind of link on table level between a released planned order with purchase requisition?
    thanks

    Hi,
    As explained by Abhishek, we do not maintain any link between the PLANNED ORDER from which a requisition is created and the actual requisition.
    The simple reason being... in general, businesses run the plans on a daily basis and each time the plan is run, the previous data is overwritten... so there is no point in retaining the information of the planned order from which you are creating the requisition.
    Hope that helps.
    Regards,
    Mohan Balaji
    NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

  • Handling Errors in Purchase Requisition

    Hi guys,
    For handling errors in Purchase Orders is quite simple because it can be used mm_messages_mac.
    and there can be used macros:
    - for adding new errors
    mmpur_message_forced 'E' 'ZM' '048' TEXT-003 ' '  ' ' ' ' .
    - for removing errors, it can be used:
    mmpur_remove_messages_by_id *ID*
    Almost all the macros from mm_messages_mac. uses this ID. What is that ?
    So, for PO (Purchase Order - ME2XN) is very simple to implement BADI's like ME_PROCESS_CUST_PO, where there can be found that ID in the methods structures (mepo*), which is used by those macros.
    But how can you handle errors in Purchase Requisition (PR - ME5XN) ??? In ME_PROCESS_REQ_CUST, for exemple, none of the methods contains structures with that ID field.
    Please Help.
    I couldn't find any answer on the internet. It seems that nobody knows. Isn't it ??

    Hi Babu,
    How can i handle errors from here??
    For exemple I need to give my own message, delete a standard one, and position cursor on a custom field.
    In Purchase Order I could use macros from mm_messages_mac.
    For example: mmpur_remove_messages_by_id ID
    But the problem is that this ID i couldn't find.
    Please help.
    Have a nice day

  • New processing status in purchase requisition

    Hello,
    I would like to add new processing status in purchase requisition such as E - Edited when simple changes are done in document.
    Is it possible to add it?
    If it is yes, please give your inputs.
    Regards,
    Sivakumar

    Hi,
    It is not possible via standard customization. You have to implement user exits with help of ABAPer;
    MEREQ001 - Customers' Own Data in Purchase Requisition / Check in SMOD

  • Error while assigning user for release approval path for payment release

    Hi everyone,
         I am trying to assign user for payment release in SPRO. I have defined upto 'Define relevant document types for release for payment', after that while assigning user in terms of position for release and save it, i am getting error 'Program error: ASSIGN with length 0 in program "MP120800" '.Because of it i can t proceed further.
    The data in details below;
    1. Create Workflow Variant for Release for Payment
       1000     SAP
    2. Assign Company Code Workflow Variant for Release for Payment
      1000     1000     SAP
    3. Define Release Approval Groups for Release for Payment
      0001     Vendor A
    0002     vendor B
    0003     Vendor C
    0004     G/L accounts
    4. Define Release Approval Paths for Release for Payment
      0001     Vendor high
    0002     Vendor middle
    0003     Vendor low
    0004     G/L accounts
    0005     Other
    5. Assign Release Approval Paths for Release for Payment
      1000     KZ     0001     0001
    1000     KZ     0002     0002
    1000     KZ     0003     0003
    6. Assign Release Approval Procedure for Release for Payment
    1000     0001     20,000.00     KES     1     WS10000052     WS00400011
    1000     0002     50,000.00     KES     2     WS10000052     WS00400021
    1000     0003     1,000,000.00     KES     3     WS10000052     WS00400022
    7. Define Relevant Document Types for Release for Payment
         1000     KR
    1000     KZ
    8. Define Users with Authorization to Payment Release
    1000     0001     1     20,000.00     KES
    1000     0001     2     50,000.00     KES
    1000     0001     3     100,000.00     KES
    here i have selected the option and tried to create Orgobject, i am getting following error
    Program error: ASSIGN with length 0 in program "MP120800"
    If any corrections in the definitions, Please let me know.
    Thanks in advance!!

    Hello,
    Please start the report RSWOGIND, set also the checkbox "generate all
    ObjTypes from new". This should solve the problem.
    Best regards, Hana

  • Tables for Release Process

    Hi All,
    What are all the Tables associated with the Release Process.
    Advance thanks
    Regards
    Arjun

    EKAB   - Release Documentation 
    EKEH    - Scheduling Agreement Release Documentation 
    EKEK    - Header Data for Scheduling Agreement Releases 
    T161E   -  Release Codes
    T161F   -  Release Point Assignment for Purchase Requisition
    T161G   -  Release Prerequisite, Purchase Requisition
    T161H   -  Fields for Release Procedure, Purchase Requisitio
    T161I    -  Determination of Release Strategy 
    T161S   -  Release Indicator, Purchase Requisition
    T161T   -  Texts for Purchasing Document Types
    T161U  -   Texts for Release Indicator 
    T163P    -   Release Creation Profile
    T163S    -  Description for Release Creation Profile 
    T16FB    -  Release Indicators: Purchasing Document
    T16FC    -  Release Codes
    T16FD    -  Description of Release Codes
    T16FE     -  Descriptions of Release Indicators: Purchasing Do
    T16FG    -   Release Groups
    T16FH    -   Descriptions of Release Groups
    T16FK    -   Release Statuses
    T16FS     -   Release Strategies

  • OSSNOTES for releasing process orders with missing parts in background

    Hi All,
    The bapi 'BAPI_PROCORD_RELEASE' is not releasing the process orders
    with missing parts in background.
    Is there any OSSNotes for releasing these process orders in backgound through this bapi.
    Pls help.
    Thanks .

    Hi Suri - Thanks for your response. I tried both with blank(individual and collective) and 2 (collective req. only) but I still get the same result. I found one other setting that can solve this issue and that is checking the activate full confirmation logic at the the MRP group level in OPPR. I will test more and let you know if that works but we dont use MRP groups here at our client and that is why I was little hesistant to set up collective availability check parameters at the MRP group level. But looks like this is the only option that we can use to get this resolved.
    Thanks,
    Bharath

  • How processing status "In Release " is set in purchase requisitions

    Hi Experts,
    How processing status, iun release is set in item details (Status tab page) of purchase requisition, also is it possible that release status is "release completed" even requisition is not subject to release strategy.
    how release active is set.
    Thank you
    Anand

    Hi
    The Stauses in the PR will be active opnly if you have the release strategy setup for the PR.
    "In release" is set when the PR is created & is subjected to approval & in the approval process.
    Relased is set when the PR is approved fianlly.
    Thanks & Regards
    Kishore

  • Any plan for "BIA process types" for Process Chains?

    Hi,
    This morning one of our blades (with Versoin 49) become unresponsive due to memory leak; RFC server on the blade was not releasing the memory. As you know by now, when it happens we restart the server on that blade and things start working until the next time.
    As a preventative measure, we would like to create a program and put in a process chain to restart the RFC and Index servers for all the blades everynight. Do you have any program already to do so? We identfied the api's already but wanted to see if somebody already doing this.
    Or even better, is there any plan for creating new "BIA process types" for the process chains that we can drag/drop instead of writing programs?
    Cheers
    Tansu
    Edited by: tansuaksu on May 4, 2009 6:27 PM

    RSDDTZA_EXECUTE_BIA_ACTIONS
    [OSS Note : 1001091|https://service.sap.com/sap/support/notes/1001091]
    [OSS Note: 1271412|https://service.sap.com/sap/support/notes/1271412]
    See if this helps.

  • AIR for iOS getting error while uploading the app, ITMS-9000 "Missing Provisioning Profile"

    hi!
    I get this error, when uploading the binary to Itunes. Any help, on how to solve out this problem ? And what does it mean ?

    for install on devices, you need to use a distribution cert. and a distribution provisioning profile for adhoc. When ready for AppStore you can use same distribution cert. but distribution provision profile for appstore. i completely use Windows PC for my entire process and use testflight to distribute to my testers. I'm not sure how the process is for simulator on the Mac is.  I just the use mac to create my certs and profiles and then application loader.
    When you tried upload to testflight did u use a distribution cert (p12) and an adhoc distibution provisioning profile. Also are the devices you are sending to are also registered to that profile.
    Also ive been doing this for 3 years now but consider myself a newbie still cuz I'm self taught and still learning and my ways of doing things in an unorthodox way but on average I have about 10 uploads of updates or new apps to the AppStore a year and haven't had an app rejected. These forms will be your best resource of info with users like @colin.

  • FM or BAPI for  date and time for the creation of a Purchase Requisition

    Hi people:
    Does anybody knows about a FM, BAPI or table in which i have de detail for the date and hour of the creation of a Purchase requisition?
    Points for helpfull answers.
    Thanks in advanced

    Hi,
    If you want to get the time along with the creation date then use the tables CDHDR and CDPOS, but be careful while passing the data need to pass the entire primary fields data else it will fail in the performance test.
    Reward points if useful.
    Regards,
    Suman

  • Problem in Calling URL for Line Item of Perticular Purchase Requisition.

    Hi Experts,
       I am calling a external window from the web dynpro which is working fine. I am trying to open transaction ME53 in the browser and i am successful in that. But now when i open that transaction there were two requirements:
    *1) It should open the purchase requisition directly bypassing the initial screen {which is completed while posting this query}*
    *2) and it should open the purchase requisition according to the specific line item. eg. for PR 1234569 Line Item 0010 should only be visible.
    Please help me out with this.
    Thanks in advance.
    Regards Saurabh Kerkar
    Edited by: saurabh s kerkar on Dec 20, 2010 12:45 PM

    Currently the URL is as follows:
    lv_url = 'http://p10dev.ril.com:8000/sap/bc/gui/sap/its/webgui?~TRANSACTION=ME53%20EBAN-BANFN='.
      concatenate  lv_url lv_banfn into lv_url.
      concatenate  lv_url '&~OKCODE=/00' into lv_url.
    this is opening transaction ME 53 skipping the initial screen with all the line item.
    i want to use it for specific line item how to do it?
    Edited by: saurabh s kerkar on Dec 21, 2010 8:23 AM

Maybe you are looking for