No authorization for variant ZPAK_D3FS09V87UVHYB1D72JT1RUSK

Hi,
I have trasnported the process chain from Dev to Quality . when I go to quality system & see the process chain is in grey color
in my application component . when I try to check & activate it gives me the error:
No authorization for variant ZPAK_D3FS09V87UVHYB1D72JT1RUSK from process type LOADING
Then I have created onemore new inforpackage & in RSPC I have opened my PC in edit mode & in process type I draged & dropped Load Process & Post - Processing -> Execute infopackage here I have selected the new infopackage name that I have created & coonected it to the start process & deleted the old infopackage connection.
As I have done all this in the Quality sytem . Can this be done in this way or do I need to follow some other procedure .
If the same issue comes in the procedure do I nned to follow the same procedure in Production as well? Pls let me know

I decided to write to an answered thread because my case was different.
I got the error together with error RSM894 An internal error occurred during the authorization check.
The cause was that corresponding datasource was 3x instead of 7x in target system.
After migrating of datasource the error was corrected.
So it was not an authorization issue.
Edited by: raaleksandr on Aug 15, 2011 9:33 AM

Similar Messages

Authorizations for variants

Hi All,
I have created may own transaction that calls ABAP query and gives some report. It has its own variant for selection screen. Now as I am creating roles, I get the message that the authorization for variant is missing. So, I know how to create/edit roles in PFCG but I don't know how to add authorization for variant to existing role.
Thx.

Dear Suad,
I think, the best place for your query is [Forum: ABAP, General|ABAP Development; or [Forum: SAP NetWeaver Administrator|SAP NetWeaver Administrator;
Instead, Best way is, to Contact BASIS-Admin.
There are few Transactions, that could be referred:
T. Code: SE93
You have created Z - VARIANT Transaction Code, using the Transaction and the Transaction Variant. Based up BASIS-Admin will assign the authorizations (for the respective users).
T. Code: SU53 or ST01 - for missing Authorization
T. Code: SU21 - Create Authorization Object
T. Code: SUIM - Roles by Authorization Object (which is not relevant, as your's is Z-Transaction for Screen Variant)
Best Regards,
Amit
Note: There are few relevant threads, it might help you
[Roles - Authorization Issue|Re: Roles - Authorization Issue]
[Missing Authorization|Missing Authorization] - Albert's Post
[Authorization Object|Re: Authorization objects and Roles]

Authorization for Variants, Views and Folders

Hi SDN'ers,
How can you manage the edit restrictions on a variant, view and folders? I mean how can you make sure certain users dont change or delete a variant for example? This has to do with authorizations and the role where you publish it in.. but i don't know the full details about it.
Thanks.

The easiest way to discover what's being checked is to perform the actions you mention with a user that has sufficient authorizations, while tracing the user with ST01 (here you can perform a trace on authorizations, except for all the query display authorizations wich you can check with rsecadmin).
In this way you can see exactly wich objects and values are being checked and thus you should be able to discover the objects and values that you need (if available).
Regards,
Jesse

No authorization for screen variant

Hi,
one of my user getting the error " No Authorizatin for screen variant" in KB11N.
sateesh

Dear Sateesh,
Have you checked the authorizations for the object K_PVARIANT? In order to access different screen variants, the user should have the appropriate values for this object.
Regards,

Authorization for opening & Closing posting periods - OB52

Hi,
Is there any way to set authorization for opening & closing of posting periods in OB52?
My scenario:
I have 2 company codes - A & B assigned to 2 different posting period variant - say PPA & PPB.
The user belonging to CoCd A should not be able to open/close posting period of CoCd B and vice versa.
Is this possible through any authorization settings?
Request your help on this.
Regards,
Sridevi

Hi Sridevi
Please go through the following:
You can assign authorization groups for permitted posting periods. This means that, for example, some posting periods can only be opened for particular users within monthly or annual closing. You can only assign the authorization group at document header level and it only affects period 1. The authorization object is called F_BKPF_BUP (Accounting document: Authorizations for posting periods). Read the corresponding chapter on "User maintenance" in the "Assigning authorizations" topic.
"User maintenance"
Due to the modular authorization concept of the system, you can define authorization profiles which are tailored to the workplace of your employees. You can, for example, assign authorization to a workplace in the Accounts Receivable, Accounts Payable or General Ledger Accounting areas.
By assigning authorizations you define which business-related objects your employees are allowed to process and which editing functions are allowed.
In the following activities for authorization management, you must carry out the following for employees who are to work with the system:
Assign authorizations
The authorizations are assigned by specifying permitted values for the pre-defined objects.
Define profiles
In the SAP system, authorizations are grouped together in workplace profiles. Therefore one or more profiles must be allocated to the individual employee in the master record.
I hope this helps.
Regards
Kavitha

Restricting Authorizations to Variants at User level

Hi SAPians,
Can you help me to know how can I restrict variants to be displayed for particular users.?
Example: I am creating 5 variants in EMMACL transaction and give authorizations for the users only to particular Variants as below:
1. Variant1 --> Can be access by only users ERP-EHK, ERP-SAP & ERP-EJS
2. Variant2 --> Can be access by only users ERP-EAS & ERP-HJG.
3. Variant3 --> Can be access by only user ERP-EMM
4. Variant4 --> Can be access by only users ERP-EHK & ERP-UJY
5. Variant5 --> Can be access by only user ERP-EAS
Let me know how I can achieve the above requirement?

Hi,
i have assigned it at user level then why iam i
getting the currency code of site level ?Did you user to logout and login again after setting the profile option at the user level?
What if you set this profile option at the site/application/responsibility level, can you reproduce the issue then?
Thanks,
Hussein

No authorization for posting previous period running a repeat depreciation

Hi!
We are working on 4.7 version, during a repeat depreciation posting run using AFAB transaction (RAPOST2000), error messages F5A 094 is issued because the user's account does not has authorization for posting on previous period.
Exact Job Log Error from SM37 transaction:
Period 003 in fiscal year 2008 is open for posting for the variant for posting periods 0020. However, you do not have the required authorization.
Please let me know what do I need check for fixing this issue.
Thanks in advance.

Hi,
Please go through SAP notes:337493-Incor.mess.for missing master data authorztn.That notes should be helpful
Thanks
Aravind
Assign points if useful

"Low-level" authorizations for accessing BW reports - add users to role

Using the advice in Topic "Low-level" authorizations for accessing BW reports, I have been able to publish a query to a role that has 3 test users and each user gets the same query but with different data, as determined in the tables.
Is there a way to look up the users and e-mail addresses from a table and associate them to the role? We have several hundred e-mail recipients that will not need BW access, but only need an e-mail with a static report that contains data on their own territories.

Hi!
i think programatically it might be complex. You got to maintain a seperate variant of report per user and use this variant to send mail. that means you need to maintain a variant and a Broadcast setting per user. once maintained you can use it any number of times the values will be recalculated everytime.
with regards
ashwin
<i>PS n: Assigning point to the helpful answers is the way of saying thanks in SDN. you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.</i>

Authorization for Cost Analysis in Production Order

Hi,
Can I maintain the authorization for displaying cost analysis in production order.
I try to create transaction variant....into ZCO02 and ZCO03
but in COOIS it is still branching to CO02 when changing and CO03 when displaying.
I want to disable the cost analysis view in production order so PP people can not access it.
is there any idea?
Please help.
Best regards,
Freddy Ha

Hi,
as i know K_ORDER is authorization for internal order.
We have activate the check in SU24,
but when we tried to trace the authorization when CO02 -> GOTO -> COST _> ANALYSIS
this auth K_ORDER is never check.
Did I miss something here?
Best regards,
Freddy Ha

Release authorization for Posting FI document nor Parked document

hii guru
I am facing a problem as below. i have created a release authorization for parking document using workflow variant, created event - Created, object type - FIPP, receiver type - WS10000051, and when i am parking the document its working fine, wants release authorization to post parked document. but my client requirement is to set release authorization for posting FI document in fb50. not parked document.
please give me a solution how do i cofigure the release authorization to post directly FI Document in fb50.
thanks & regards
Rajesh

i have solved by myself

Authorization for PO fields of over delivery and under delivery tolerance

Hi,Any one know how to set authorization for PO fields of over delivery and under delivery tolerance?
For example to allow certain user to edit the these fields but other users will be only display mode.

Better create variant for restricting fields over & under delivery tolerance for certain users than applying authorization.

Authorization for Service Desk

Hello,
what SAP Roles are necessary for Solman Users to create and changes Messages in (for) the Service Desk.
The Users should only be to create and change Messages , no authorization for Admin the Service Desk.
The Users should create Messages in the Satellites Systems and it should be possible also to change this messages directly in the Solman.
Thanks
Toni

Hi Antonio,
At the moment, I am not fully aware of the possible Authorisation object level of controlling this.
However, the following could be a solution, if explored.
The transaction CRM_DNO_MONITOR is the one the message processing person is supposed to be used, to list and then act upon messages. I hope that's what you were planning to use.
If so, you can attempt this:
(1) Under the sub-section Business Partner, you can restrict the Partner Function to the following three entries:
      (a) SLFN0002 - Reported By
      (b) SLFN0004 - Message Processor
      (c) 00000022 - Person Responsible
(2) In the field above that, Business Partner, specify the individual's Business Partner number.
Save this as a user specific variant
Having saved this variant, you can make it possible for this User ID to always pick that particular variant everytime the transaction is accessed.
Regards,
Srini

Problem with Authorization for Planning folder

Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
we are not pulling the data from any other server, all the data is on the sif any one has faced the same issue let me know.
Regards,
Abraham

Calling Thru Trans code: BPS0 in ECC 6
getting this error:
Error while calling up RFC
Message No. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"An error occurred during the receipt of a complex parameter."
after i check in bw trans code:st22
Following this error message:
Category                   Internal Kernel Error
Runtime Errors         PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC
Short text
    An error occurred during the receipt of a complex parameter.
What happened?
    During a remote function call, an error occurred while converting
    a complex parameter.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    An error occurred during the conversion of a complex parameter.

Problem with Authorization for BW BPS planning Folder

Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
if any one has faced the same issue let me know.
Regards,
Abraham

HI ,
I Checked it out we dont have that cube in our system.
Regards,
Abraham

Authorizations for materials and material groups

Hello experts,
Is it possible to limit the authorization to make purchase requerisiton of some materials or material groups depending on the user?
I heard that it is possible be able to update some materials using the authorization M_MATE_MAT and including them in the material master, material group and user. But this also works for the creation of purchasing documents (PR,PO,RFQ,...)? Do I have to include this authorization for all the materials? If they do not have I understand that works for every people.
Thanks in advance for your help
Best regards,

Hi Madii,
actually Authorization works at the object level, i.s if you have provided the authorization for the user to makePR with certain Material Grp, then if you dont define that grp in the PO role, but still user will get the authorization from the PR role.
why you want to allow the user to make the PR of certain Mtrl Grp for which he should not be making the PO.
or let a different Body take care of the other mtrl Grp.
Hope it helps.
Regards,
Yawar Khan

No authorization for variant ZPAK_D3FS09V87UVHYB1D72JT1RUSK

Similar Messages

Maybe you are looking for