No authorization to send IDocs with message type R

I'm in the process of installing some business content for a 3.5 prototype. When trying to load some master data I get the following error in the transactional RFC in the source system.
"No authorization to send IDocs with message type R"
Any clues to what may be causing this?
Any help appreciated.
thanks
Mike

Hi Michael,
the suggestion for SAP_ALL was just for testing purposes in order to see whether it works then. If security is an issue you should reduce the authorization to the ones really needed (see note).
Another security option is to make the background user a system user and not a dialog user.
Regards, Klaus

Similar Messages

RFC error "No authorization to send IDOCs with message type ..."

Hi all,
I have now tried just about everything I could think of, applied all the notes mentioned on this forum but still no luck. Can anyone please help ...
I have got a file to idoc scenario, the status in the sxmb_moni is successful, but the outbound processing logs an error. When I go to transaction SM58 I get an error for the user XIAFUSER with the message "No authorization to send IDOCs with message type WPUUMS".
I have tried giving this user SA_ALL access and still got the same error thus concluding that this is not an authorisation error.
Any suggestions?
Regards,
Liesel

Hi Liesel,
The RFC destination that you have put in IDoc communication channel must be present in your SAP XI system, transaction SM59 also.
Please check if the user id/Password that you have given has all the authorization.
Also check the User ID and passwrord in SM59 in R3 and see if a Remote Login is possible.
There is also some configuration by which the clients are allowed / blocked from receiving Idocs from XI. Basis guys can do it for you. Please approach your basis consultant. Hopefully that helps..
Regards,
Abhy Thomas

Error : No authorization to send IDocs with message type MATMAS

Hi All,
My scenario is FILE-XI-IDOC.
I am getting chequered flag in SXMB_MONI,but in that under outbound status I am getting red flag.
When I check in SM58 I am getting message as "No authorization to send IDocs with message type MATMAS".
Do I need to give any authorizations on XI side or on R/3 side?
If so, what is the authorization required?
I could not find the note :837595.

You use the IDoc Adapter in the Exchange Infrastructure and you try to use the IDocs to receive or send data. For these IDocs, an attempt is made to load the IDoc metadata from an R/3 reference system with an SAP NetWeaver Release lower than 6.20.
This occurs either at runtime, whereby the relevant messages run into 'System error' status, or when you use transaction IDX2 during manual loading of the metadata. In this case, the reference ystem is called by RFC and the logon user of the RFC destination does not have the necessary authorizations for determining the metadata.
Solution
In transaction PFCG, extend the role of the logon user by adding the following authorizations:
Authorization object S_RFC
 Field name RFC_TYPE value FUGR
 Field name RFC_NAME value EDIMEXT, SDTX
 Field name ACTVT value 16
Authorization object S_IDOCDEFT
 Field name ACTVT value 03
 Field name EDI_CIM value ' '
 Field name EDI_DOC value TXTRAW01
 Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
 Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
 Field name ACTVT value 03
 Field name DICBERCLS value
from the note mentioned above.
Regards
Bhavesh

Issue: "No Authorization to send Idocs with message type Orders" - IDX5

Hi All,
I am working on a File to IDoc(Orders.Orders05) scenario. The sender is PI Server and the receiver is the SAP ISR system. A technical system has been created in PI SLD for the ISR system and a Business system is added to that. The logical system created in ISR system using Tcode BD54 is added to the business system in PI. A new RFC destination is created in PI system to connect to the ISR system.
On the ISR system Partner profile is created using TCode we20 with the same logical system name already created using Tcode BD54.
When sxi_monitor is executed on the PI system, It shows checked flag on the Inbound side and Red flag on the Outbound side. And when idx5 is executed, it shows the new Idoc number and when it is double clicked, it shows the Status Text as
"No Authorization to send IDocs with message type Orders".
All authorizations have been provided on the Sender side.
Please let me know if any authorization need to be provided on the ISR system or Is this an error on any settings.
Thanks in Advance.
Stalin S.

Hi,
Check this Thread which deals with the Authorization Issue
RFC Adapter
And also check this how to check whether u have sufficient authorization to send the Idocs or not
To test the Authorization check
Double click the RFC Destination that u have created in XI towards R/3 in SM59
Select UtilitiesTestAuthorization test
By this you can come to know whether your user is having the propper authorization or not
REgards
Seshagiri

Workflow Ends in Error " No auth to send IDocs with message type ORDRSP"

Hello All,
I have created an RFC user with limited Authoprizations including WE* tciodes and a few ME* transactons for an ALE Set up. I want to make sure i would not be giving more authorizations (extensive) to this RFC user and assign Just required authorizations. So i started testing testing and the inbound IDOC ended in error with a message " No auth to send IDocs with message type ORDRSP" Message no. SR053. Is there any way to find out what is the missing authorization object for the User. Any inputs would be really apprecaited.
Br,
Sri

Hi !
Becaus alle this happens in beckgound, things are a bit difficult but solvable....
What you should do is a "Authority trace" ... as follows....:
- Go to the ST01
- Mark "Authorisation Check"
- Swich the trace on for your Workflow user
- Execute the Workflow until the error uccurs
- Go back to the ST01
- Press the "Analyze" button and see what error occurs
Dont forget to swicht the trace off... otherwise the tracefiles become realle BIG !
Regards
rainer
Some Reward poins would be nice if that helped....

Creation of IDOC with message type INVOIC01

Hi All,
I am trying to create a new IDOC with message type INVOIC01.
When I see transaction WE81, I observe that the required message type INVOIC is available. Also in WE82 the basic types INVOIC01, INVOIC02 and INV_ID01 are attached to the message type INVOIC.
However, while trying to create an IDOC in WE19 using a message type, I get options to create against INVOIC02 or INV_ID01. The basic type INVOIC01 is not getting populated because of which all the IDOC that I create are of basic type INVOIC02.
The client wants me to create IDOCs with basic type INVOIC01.
Can anyone please help?
Thanks in advance.
regards
Nagarajan

Hi Nagaraj!
I've looked at the documentation and did not find information, which would help me. Should I use in my case z-segment to put extra lines or there is some qualifier in segment E1EDP02 (Document Item Reference Data), which triggers to another referencing (not PO or delivery note)?
Thank You,
Natalija

Idoc with message type

i need an example how to use the message type in IDOC

Hi Manohar,
This is custom IDoc prgm.Award points if useful
IDocs Standalone program
This Prgm will upload data in flat file into internal table and sends that data to inbound system
REPORT ZMMMC9403_UPLOAD_MATERIAL_IDOC.
*1.Create parameters/select-options for input data. i.e., empno, message type, logical system.
parameters : p_mestyp like edmsg-msgtyp default 'zmsgkk',
 p_logsys like tbdlst-logsys obligatory.
*2.Create Data objects for control record, data record and database table.
data : c_segment like edidd-segnam value 'ZKSEGTYPE', "Data record (IDoc)-Segment type
 c_idoctp like edidc-idoctp value 'ZKIDOC'. "Control record (IDoc)-Basic type
data : begin of itab occurs 0,
 zsno like zkiran-zsno,
 zsname like zkiran-zsname,
 end of itab.
data : w_itab like itab.
data : s_segment like zksegtype.
data : i_edidd like edidd occurs 0 with header line.
data : i_control_record like edidc.
data : i_comm_idoc like edidc occurs 0 with header line.
*3. Select the data from flatfile/corresponding tables into internal table for a defined condition.
*select single zsno zsname from zemp into corresponding fields of it_zemp where empno = p_empno.
call function 'GUI_UPLOAD' "since the data is coming from flatfile, GUI_UPLOAD is used
exporting
 filename = 'C:\DATA.TXT'
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = 'X'
tables
 data_tab = itab.
*4. create control record into internal table.
i_control_record-mestyp = p_mestyp. "Message Type
i_control_record-idoctp = c_idoctp. "Basic type
i_control_record-rcvprt = 'LS'. "Partner Type of Receiver
i_control_record-rcvprn = p_logsys. "Partner Number of Recipient
*5. create data record into internal table.
*i_edidd-segnam = c_segment.
loop at itab into w_itab.
s_segment-zsno = w_itab-zsno. "Application Data
s_segment-zsname = w_itab-zsname.
i_edidd-sdata = s_segment.
i_edidd-segnam = c_segment.
append i_edidd.
endloop.
*6. Process ALE Service Layer using the function module MASTER_IDOC_DISTRIBUTE. It returns the corresponding IDoc No.s.
call function 'MASTER_IDOC_DISTRIBUTE'
exporting
 master_idoc_control = i_control_record
tables
 communication_idoc_control = i_comm_idoc
 master_idoc_data = i_edidd
exceptions
 error_in_idoc_control = 1
 error_writing_idoc_status = 2
 error_in_idoc_data = 3
 sending_logical_system_unknown = 4
 others = 5.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*7. Display Communication IDocs.
loop at i_comm_idoc.
write : / 'Communication IDoc No. is : ', i_comm_idoc-docnum.
endloop.
*8. Commit Work.
commit work.

Wrong Partner Type in IDoc with message type REMADV

Dear all,
We have created 2 IDocs, one for outbound (first in one company code) and one for inbound (receiving company code) with transaction F110 (message type REMADV, Idoc basic type PEXR2001). However, for the first outbound IDoc we have created, we have the wrong Partner type (we would like it to get type KU (customer)) LS (Logic system).
Does anyone know how to change the partner type from the Idoc generationg?
Many thanks,
Ronny

Hi,
Welcome to SDN.
Please delete the exisiting outbound partner profile (WE20) for message type REMADV which under partner type LS (Logical System) and setup new outbound partner profile for partner type KU (Customer).
Regards,
Ferry Lianto

Error monitoring through workflow for idoc with message type ORDRSP

Hi All,
Through WE19 I am trying to post a failed idoc ie idoc in 51 status for message type ORDRSP to check whether the event IDOCORDRSP-INPUTERROROCCURED event is triggering or not. Though the idoc is going into 51 status and partner profile is maintained I cannot find this event in SWEL. I checked in fm IDOC_INPUT_ORDRSP fm and found that workflow_result is 99999.
Can anybody tell me why the event is not getting triggered for the message type ORDRSP or where do I debug to find out what is going wrong. IDOC_INPUT_ORDRSP fm is getting called from BUS2012 'S method confirmfromORDRSP which is very strange.So I am not getting where do I debug.
Regards
Suchandra

Hi All,
Solved it by my self.. To trigger the event we need to populate the EDIDC control record in WE19 and press standard inbound button 'not test by inbound fm) and then the inputerroroccured event will trigger...
Regards
Suchandra

User has no authorization to send IDOCS of type

Hi Gurus,
I am sending an IDOC of type OILDEB02 from XI to R/3. I have done the configuration (we20, we21 etc). The message is processing successfully and not reaching the R/3.
When I checked in IDX5, after cclicking the 'transaction id', i see this message.
Caller: XIAFUSER
No authorization to send IDOCS of type OILDEB02.
Do we need to create the XI service users in the R/3 system?
I wanted to know what is missed in this configuration?
Thanks
Kalyan

Bhavesh,
I am using File to IDOC interface.
I have checked all the items you mentioned. Everything is working as expected.
1. The rfc destination and port in the IDOC adapter are the valid ones you have created for the R3 system in Sm59 and IDX1 respectively
***THESE ARE VALID
2. Go to IDX2 and try to manually import the Idoc metadata. See if this is successful.
MANUAL IMPORT IS SUCCESSFUL
3. In the RC destination in Sm59, try a test connection and remote log on.
TEST CONNECTION AND REMOTE LOG ON WERE SUCCESSFUL.
4. Finally check if the user id has the roles mentioned in my porevious reply and if yes, things should work.
I didn't check this on. But there was no error regarding my user id.

After I run the interface, XI is showing the processing successful and the IDOC is not received at R/3.
When I checked in IDX5 in XI, after clicking the transaction id, the message is saying that -
Caller XIAFUSER
Function module: IDOC_INBOUND_ASYNCHRONOUS
Target system: R/3 SYSTEM RFC destination I have created in XI
Status text: No authorization to send IDocs with message type OILDEB
Any thoughts??
Thanks
Kalyan

Outbound delivery with Inbound IDOC DELVRY06 with Message type SHPCON

Hi Friends
I am trying to pack outbound delivery with Inbound IDOC DELVRY06 with Message type SHPCON.
But IDOC has error Specification of destination HU missing.
Could you please help us to resolve the issue to Pack the outbound delivery with the IDOC.
Thanks
SR

HI Ian Kehoe
Sorry for delay in reply
Thanks you very much
I solved that problem .
Could you please advice test data for IDOC DELVRY06 packing hierarchy (multi level packing) to pack SAP outbound delivery.
Thanks
Ravi

Diff bet IDOC and Message Types.

What are the difference between IDOC and Message types.
Diff between MATMAS01 ,MATMAS02 and MATMAS03

IDOCs:
- IDOC is an Intermediate Document. It is simply a data container used to exchange information between any two processes that can understand the syntax and semantics of the data.
An IDOC is created as a result of executing an Outbound ALE or EDI process.
In an inbound ALE or EDI process, an IDOC serves as input to create an application document. When an IDOC is created in the system , an unique number(16 Digits) is assigned to it.IDOC will wait until the Remote System is Active.
Basic Idoc Type: Basic Idoc type defines the structure and format of the business document
that is to be exchanged between two systems. Basic Idoc type can refer to an SAP provided
basic IDOC type or a customer developed basic IDOC type.
- A basic IDOC type has the following characteristics:
Name : A basic Idoc type can be assigned upto a thirty character name.
List of permitted segments: The segments make up the IDOC structure.
Hierarchy of segments : The hierarchy of segments specifies the physical sequence and any parent - child relationship in the segments.
Mandatory Vs Optional Segments : When used in the IDOC type, each segment has an attribute that defines whether the segment is option or mandatory. Minimum/Maximum range for each segment: It defines the maximum and minimum number of timesa data record corresponding to a segment cn exist in an IDOC.
-Segments : A segment defines the format and structure of a data record. Segments are reusable componets. A segment consists of various fields that represent data in data record.
IDOC Record Types:
1. Control Record : The control record contains all of the control information about an IDOC, this information basically includes the IDOC number, sender and receiver information, and information such as the message type it represents and the IDOC type.
- there is only one control record per IDOC.
- The stucture of the control record is the same for all the IDOCs and is defined by SAP.
- The structure of the control record is defined by the data dictionary structure EDI_DC40. The control record is stored in the EDIDC table.
2. Data Record : Data records contain the application data. A data record has two sections
Administrative Section and a Data section.
- The Administrative section cotain the segment name, client, IDOC number, segment number, hierarchy level information.
- The Data section of a data record is a stram of 1000 bytes where the actual data resides.
- The data record is defined by the data dictionary structure EDI_DD40.
- Data records for IDOCs stored in the EDID4 table.
3. Status Record : Status records are attaced to an IDOC throughout the process as the IDOC achieves different milestones or encounters an error. At every milestone a statu code, date and time are assigned.
- Status codes 01 to 49 are reserved for OUtbound process, 50 and above are reserved for inbound processes.
IDOC TYPE IS AN INSTANCE OF IDOC
Message Type: Identifies what type of information transformed between logical systems or partners.Message type is not a local object type , it is transportable.
For different applicatons we have different MESSAGETYPE.
example:
APPLICATION MESSAGETYPE
MATERIAL MASTER MATMAS
VENDOR MASTER CREMAS
CUSTOMER MASTER DEBMAS
MATMAS01, MATMAS02, MATMAS03, MATMAS04, MATMAS05 are all MESSAGETYPES ... FOR NEW VERSIONS LIKE SAP 4.7EE, SAP ECC5.0....we have to use MATMAS05 message type. for older versions like SAP R/3 we have to use MATMAS01.
REWARD ME IF THIS IS HELPFUL

How do I execute IDOC for message type LOIPRO

How is it possible to execute IDOC using message type LOIPRO which I have configured with change pointers? Change pointers are using object ORDER.
I am looking to only generate IDOC for production order changes / updates that meets the criteria set by the change pointers. If something in the order changes, but that field is not being looked at by change pointers, I don't need IDOC to pick up that order.
I don't want to have to run RCCLTRAN or RCCLORD on a scheduled job. Only need to have activity if change pointers are activated. Am I going down the wrong road using LOIPRO ?

Hi Bob,
Could you please guide me through the process of creating/triggering a change pointer based LOIPRO? Your help much appreciated.
Tabraiz

Problem In IDOCS of Message Type ORDERS05

I am Trying to place Sales Order as soon as i recieve an idoc of Message Type ORDERS05. But It gives following error when it recieves the idoc of a Purchase Order.
VKORG, VTWEG, SPART cannot be determined for customer 0000003000, vend 0000005595.
I am not Getting This Problem.
Please Help.

Hi,
Please see the link below for some information.
ABAP Development
If you find the info useful please reward with points.
regards
Aveek

No authorization for this transaction with mvt type 101

Has anyone seen this error:
RFC BAPI Wrapper call:You have no authorization for this transaction inplant 1120
RFC BAPI Wrapper call:You have no authorization for this transaction with mvt. type 101
RFC BAPI Wrapper call:You have no authorization for this transaction inplant 1120
The strange thing is that when I assign user with a different Personnel Number and it works just fine. But when I switched back to his Personnel Number, then I get above error.
Even though I don't get any order list but I got all notifications and technical objects.
Also, this user has same roles with everyone else. While everyone is working fine this user is the only one that getting the error and no order download to PDA.
Regards,
Dai Ly

Hi,
please run ther getlist and getdetail handler in the backend directly for that user - most likely you will get a better failure message there.
Nevertheless - what Application yre you using? Is it MAM? If yes, check the SPRO setup for this particular user,
Regards,
Oliver

No authorization to send IDocs with message type R

Similar Messages

Maybe you are looking for