No "Auto Extend" option for tablespace files in sqldeveloper 4.0

In Create Tablespace > File specification tab there is no “Auto Extend” option anymore in sql developer 4.0 (still present in 3.2). Maybe someone knows how to enable it if I missed something in configuration?
Here is an illustration:
http://i.piccy.info/i9/7c8d7a842786c5e2d07fb07464948813/1387918107/43886/670008/screen_14.png
Thanks.

Oh, really? Before rising this question I tried to search everywhere and did not find any mention of this defect. Thank you for confirm this.

Similar Messages

How to set auto delete option for old messages

Hi All,
Can any one help me on how to set auto delete option for mails older than 15 days from my Z10.
James Kurian

There is no such option in BB 10.
However, you can achieve a similar result by setting your email sync timeframe to 14 days (the closest option).
If you are using an ActiveSync account (such as Hotmail, Outlook.com), go to Settings > Accounts > select the account. Tap advanced at the bottom of the screen. Scroll to the very bottom, tap Sync Timeframe and set to 14 days.
If you are using an IMAP account (such as Gmail or GMX), you will have to delete, then re-add your account. The Sync Time frame is only avaialble during setup for these accounts. When adding, tap advanced at the bottom of the screen and set the Sync Timeframe.
Hope this helps.

Can't get duplex print option for pdf files using Adobe ReaderXI 11.0.04, Mac 10.8.5 with HP8600

I get two-sided option for normal printing, but
I can't get duplex print option for pdf files using Adobe ReaderXI 11.0.04, Mac 10.8.5 with HP Officejet Pro 8600. HP says it's an Adobe problem. I'm stuck.
Thanks in advance.
VO

It depends where the pdf is located. If in the Finder or in an attachment to
an email in Entourage, the message is ³You can¹t open the application
³Acrobat Reader 5.0² because PowerPC applications are no longer supported².
If an attachment in an email that has come via Safari, the message is
³Safari can¹t open the file because no available applications can open it².
In each case the menu bar is Finder or Entourage or Safari as the case may
be.

Restrict the User name / Password Auto complete option for users accessing

Hi All,
Can any one know the Restrict the User name / Password Auto complete option for users accessing Portal from within and outside of Portal.
Regard's
Rama

Are your referring to the browser functionality of remembering the usernames and passwords?
Thanks,
GLM

MF Toolbox wont give auto feed option for scanner

We've sucessfully used our MF4350d for months. No problems with MF toolbox until randomly the auto feed option for scanning disappeared and the only option on drop down from toolbox when selecting source is platen glass.
When contacting canon for assistance to resolve this, I was told support for something so clearly a canan software issue and not a printer issue would cost $99.99. Beyod the cost of going out and buying a new scanner from a different company. I hope canon can show some customer care and help resolve this issue.

Hi bowski.
I will be glad to assist you.
Please note that Canon does not charge for technical support by telephone. To contact us, please call 1-800-OK-CANON (1-800-652-2666), Monday - Friday (excluding holidays), from 8:00AM - 8:00PM.
So that I can better assist you with the MF Toolbox, I would like to ask a few questions.
1. Which operating system is installed on your computer?
2. How did you install the drivers and software onto the computer?
I look forward to your reply. Should you need immediate assistance, please contact us at the number above and a telephone support representative will be able to assist you.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Select options for a file

Hello all,
At the moment iam using parameters for actual file and its path
for eg:
PARAMETERS: p_file(100) TYPE c .
i want to go for select-options so that i can use multiple files at the same time.....plz advise
regards

hi Sudher,
TABLES : rlgrap.
SELECT-OPTIONS : s_file FOR rlgrap-filename NO INTERVALS.
hope this helps
ec

Disable download a copy option for pdf files in SharePoint 2013

Hi,
We need to disable Download A Copy option of Document library for few users of our site.
We have provided them View Only rights which disables download for other files except PDF files.
Kindly suggest

Hi Nirikshita,
As the “Download A Copy” button was available when the users(View Only permission) clicked a PDF file, you can try to hide the “Download A Copy” option based on user permissions.
There are some links for your reference:
http://social.technet.microsoft.com/Forums/en-US/12c1db29-38ab-45cc-803d-29e5ba4834bc/disable-download-a-copy-submenu?forum=sharepointgeneralprevious
http://www.alaindeklerk.com/conditionally-enabledisable-ribbon-buttons-based-on-user-permissions/
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/eba89b93-6d1b-4453-b50c-5fc7790c1082/how-to-hide-ribbon-buttons-from-sharepoint-2010-page?forum=sharepointcustomizationprevious
http://johanolivier.blogspot.com/2011/12/show-or-hide-sharepoint-ribbon-tab.html
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Explain statspack values for tablespace & file IO

10.2.0.2 aix 5.2 64bit
in the Tablespace IO Stats & File IO Stats section of statspack and awr reports can someone help to clear up a little confusion I have with the value for AV Reads/s & AV Rd(ms). I'll reference some values I have from one of my reports over a 1 hour snap shot period, with the first three columns being reads, av rd/s, av rd(ms) respectively for both sections.
For Tablespace IO I have the following.
PRODGLDTAI
466,879 130 3.9 1.0 8,443 2 0 0.0
For File IO I have the following for each file within this tablespace.
PRODGLDTAI /jdb10/oradata/jde/b7333/prodgldtai04.dbf
113,530 32 2.6 1.0 1,302 0 0 0.0
PRODGLDTAI /jdb14/oradata/jde/b7333/prodgldtai03.dbf
107,878 30 1.6 1.0 1,898 1 0 0.0
PRODGLDTAI /jdb5/oradata/jde/b7333/prodgldtai01.dbf
114,234 32 5.8 1.0 2,834 1 0 0.0
PRODGLDTAI /jdb5/oradata/jde/b7333/prodgldtai02.dbf
131,237 36 5.2 1.0 2,409 1 0 0.0
From this I can calculate that there were on average 129.68 reads every second for the tablespace and that matches what is listed. But where does the av rd(ms) come from? If there are 1000 milli-seconds in a second and there were 130 reads per second, doesn't that work out to 7.6 ms per read?
What exactly is av rd(ms)? Is it how many milli-seconds it takes on average for 1 read? I've read in the Oracle Performance Tuning doc that it shouldn't be higher than 20. What exactly is this statistic? Also, we are currently looking at the purchase of a SAN and we were told that value shouldn't be above 10, is that just a matter of opinion? Would these values be kind of useless on tablespaces and datafiles that aren't very active over an hours period of time?

10.2.0.2 aix 5.2 64bit
in the Tablespace IO Stats & File IO Stats section of statspack and awr reports can someone help to clear up a little confusion I have with the value for AV Reads/s & AV Rd(ms). I'll reference some values I have from one of my reports over a 1 hour snap shot period, with the first three columns being reads, av rd/s, av rd(ms) respectively for both sections.
For Tablespace IO I have the following.
PRODGLDTAI
466,879 130 3.9 1.0 8,443 2 0 0.0
For File IO I have the following for each file within this tablespace.
PRODGLDTAI /jdb10/oradata/jde/b7333/prodgldtai04.dbf
113,530 32 2.6 1.0 1,302 0 0 0.0
PRODGLDTAI /jdb14/oradata/jde/b7333/prodgldtai03.dbf
107,878 30 1.6 1.0 1,898 1 0 0.0
PRODGLDTAI /jdb5/oradata/jde/b7333/prodgldtai01.dbf
114,234 32 5.8 1.0 2,834 1 0 0.0
PRODGLDTAI /jdb5/oradata/jde/b7333/prodgldtai02.dbf
131,237 36 5.2 1.0 2,409 1 0 0.0
From this I can calculate that there were on average 129.68 reads every second for the tablespace and that matches what is listed. But where does the av rd(ms) come from? If there are 1000 milli-seconds in a second and there were 130 reads per second, doesn't that work out to 7.6 ms per read?
What exactly is av rd(ms)? Is it how many milli-seconds it takes on average for 1 read? I've read in the Oracle Performance Tuning doc that it shouldn't be higher than 20. What exactly is this statistic? Also, we are currently looking at the purchase of a SAN and we were told that value shouldn't be above 10, is that just a matter of opinion? Would these values be kind of useless on tablespaces and datafiles that aren't very active over an hours period of time?

Why is there no camera calibration options for Fuji files.

I wish there were camera calibration presets that matched the in camera jpeg settings for Fuji files like there is for Nikon. (They mimic the classic Fuji films.) Why arent there?

Camera matching profiles are so far only provided for the most popular cameras. You can make your own with the DNG profile editor.

Quality options for sound file conversions

Before purchasing this application I'd like to know more about the quality of the algorithms used for conversions such as
Dither options for bit depth conversion
Conversion of sample Rates
as well as whether LE supports 96K Hz and 192K Hz recording.
Thanks.

Hi,
I am not 100% sure about LE, but usually it is the same basic program as Logic Pro, which can do all these things. You have 1 POW-r dithering and 2 POW-r noise shaping algorithms, and sample rates up to 192 kHz (which i won't recommend in any case, though, unless you have a bat's ears). 192kHz drains heavily on the system ressources, and you should have a very good reason to make recordings with such a high sample rate. Usually, 44.1 kHz (or 48kHz for video production) is the maximum even a well trained and critical ear will hear, and the reasons for going higher than that are of a more academical nature. But i guess you know this discussion?
Greetings,
Fox

Auto forwarding option for a substitute

Hi ,
Can somebody help me the workflow automatic forwarding option works with substitutes.
USER A is a substitute for for USER B and both users are setup for automatic forwarding
to external outlook e-mail address.
When a workitem sent to USER B , it showed up in USER A inbox.
But the external e-mail sent to only main user ( USER B ) , but not the substitution.
Anybody has a clue about auto forwarding works with substitute ?
Thanks in Advance.

Thanks for your answers...
Outlook/ Substitute setup is working fine ..
both main user and substitute are maintained with external e-mail address and autoforwarding option.
Only main user is receiving e-mail. Substitute is receiving the work item in his inbox..but not outlook mail..
If Is end a work item directly to substitute , he gets the outlook e-mail.

Download options for digital file purchases

I would like to set up BC so customers can login to their account and download their digital file purchases. I'm not finding much documentation on selling digital files. Is the only way for customers to download digital file purchases the link on their email receipt or are there other option?

Hi,
Within BC the file link can only be sent through the purchase email.
I'm unaware of any workarounds at this stage however will leave this thread open to suggestions.
Kind regards,
-Sidney

HT4943 Unable to change auto renewal options for VF iPad Editon

There is no option to prevent auto renewal for this app. What am I missing?

Is this a subscription?
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

No Load Option for ASE Files in PS 7.0?

I am still using photoshop 7.0, and was looking to load some
swatches from kuler, but I cannot! The only swatch files supported
by this version of photoshop are ACO and ACT... am I missing
something here.. or is this true?
If it is, how can I make it load the ASE swatches as well?
Thanks,
-terra

kuler currently works with Adobe Photoshop CS2 using ASE
files. There is no support for ACO and ACT.

Print to Adobe pdf does not give option for .pdf file

I recently installed Acrobat X Pro. I have a 10-page pdf document open in Acrobat. I want to eliminate the first page and save the other 9 in another file. In previous versions, I would select Print and then select the printer "Adobe PDF". When I do this now, the Save As File Type gives me only one choice - All Files *.* - which is useless. If I am in any other application the Save As File Type comes up .pdf. I don't think it is the installation, because I installed this on my desktop and laptop and it is doing the same thing in both of them. The operating system for both computers is Windows 7 64-bit. What can I do to fix this? Is it just a matter of changing a setting that I am not aware of? Thank you in advance to anyone who will help.

For Acrobat X I went to Tools - Pages - and the delete choice was grayed out. I thought I could get the same result by using the Print to Adobe PDF command. From any other application I can print to Adobe PDF, just not in Acrobat. Does Acrobat X not let you do this, or is it just on mine? And if it is only on mine, what do I do to fix it? By the way, I am able to delete pages from other documents, just not the particular document I am currently working with.
Any other suggestions anyone?

No "Auto Extend" option for tablespace files in sqldeveloper 4.0

Similar Messages

Maybe you are looking for