No Automatic confirm for TO from PC

Dear Expert,
I will use external racking system and use idoc to the interface.  I have problem when using Posting change movement type 309, when source and destination bin is same bin. The TO showing the first line AS1 - 922 was automatically confirm and 2nd line 922 - AS1 no yet confirmed
Our scenario need that both of line item should not confirmed, and will confirm using idoc.
I already deactivate all setting auto confirmation in storage type, define movement type and interfacing movement type MM-WM.
There is any advise to deactivate automatic confirm, or any users exist?...
regards,
Irwan

Hello Irwan,
this is a unlikely behaviour for posting changes TOs.
In older releases (as far as I rembember), it was possible to get 1st item created unconfirmed but it was not possible to confirm the 1st item with a difference.
The difference behaviour is the reason why it does not make too much sense to leave the 1st item unconfirmed after creation, because it was - and is - still not possible to confirm it with a difference or use a WMCATO to cancel it.
So even if you manage to get it created unconfirmed and sent it by WMTORD, the only WMTOCO for this item is a confirmation, even if your subsystem does not find the stock/SU at the source bin. The difference hast to be reported in 2nd item all the time.
We integrated this in our subsystem by detecting a posting change TO with 1st confirmed item and do not create a WMTOCO for this item after executing the posting.
Best regards,
Matthias

Similar Messages

  • Automatic confirmation of activities from MM and PP

    We have had a request in our post go live for automatically confirming activities such Purchase Order confirmation and Release of a Production Order to automatically update the status in SAP PS to the direct activity it is linked through the WBS.
    Have you experienced this request before?  There are some suggestions to trigger off BADIs certain updates to PS but we can’t be the first company to want direct integration between PS/PP?
    Would love to hear your thoughts

    Hi,
    There are standard BAPIs available to which you may required to tweak to your requirement.
    1. BAPI_NETWORK_CONF_GETDETAIL - this will extract the data
    2. BAPI_NETWORK_CONF_ADD - this create/update the data.
    Thanks,
    Sudhakar

  • Automatic Confirmation for MVT 999

    hoe to set automatic confirmation of TO for movement Type 999 in WM

    Hello,
    Check view V_T333 (Ta->sm30). and enter the warehouse no and movemnt type.
    check the checkbox for  TO itrm can be confirmed immediately.
    Hope this will help.
    Regards,
    Nisha

  • Automatic TO creation and confirmation for a Material document

    Hi Dear All,
    i am new to MM andWM.
    I have to customization for auto transfer orders and confirmations for material documents what ever created with 101 movement type in Inventory Management. I have down configuration like below.
    SPRO->Logistics Execution->Warehouse Management->Activities->Transfers-> Set Up Autom. TO Creation for TRs / Posting Change Notices
    Double click on ‘control data ‘tab
    Hear for my warehouse I given input like   Auto TO = ‘1’,
                                                                             AddId = ‘select check box’.
    And in ‘Assign control’ tab for 101 movement type I have given input like below.
    Automatic TO = ‘1’.
    TO item can be confirmed immed. = ‘tick checkbox’
    Propose Confirmation = ‘tick checkbox’.
    Foreground/Backgrnd = ‘D’.
    After creating of Material document I am executing report RLAUTA10 in SE38.When I execute this report system showing message like ‘TO processing finished: TR total:   17, TO created:    0, Errors:   17’.
    If I check header details of transfer requirements in LB03, i am not seeing ‘Tick Mark’ in Auto TO Creation field.
    Can any one tell me what the mistake i have down or if i need to do any further configuration. Please help me regarding this concern?
    Thanks in Advance..

    Dear Steve,
    Thanks a lot for giving reply with what I need to do, but I am unable to see result.
    I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
    Click on ‘Assign’ button,
    Press on ‘New entries’
    WhN = ‘900’
    Reference Movement Type = ‘101’
    Movement indicator = ‘B’
    Movement type for Whse Mgmt = ‘101’
    TR create Transfer Requirement = ‘X’
    Immed.TO Creation
    Mail confirmation for background processing = ‘01’.
    GR date = ‘2’

  • Automatic TO Creation and Confirm for the 321 Mvt type

    Hello Experts,
    Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
    I have already activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe
    2.TO item to be confirmed immediately
    3.Propose confirmation
    Table T333 -AUTTA
              T333-SQUIT &
              T333-VQUIT is activated.
    Please let me know any other settings to be performed
    Regards
    Krishna

    Hello Experts,
    I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
    I made the below settings
    I have activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe   -"A"
    2.TO item to be confirmed immediately  - tick mark
    3.Propose confirmation   - tick mark
    Table T333 -AUTTA
    T333-SQUIT &
    T333-VQUIT is activated.
    I have activated in OMKX as below
    Table T321-TBFKZ Immediate TO Creation with "A"
    T321-TAFKZ TR creation with "X"
    After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
    Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
    Thanks & Regards
    Krishna
    Edited by: Hariharan krishna on May 25, 2011 8:01 AM

  • How can I  remove my credit card from the automatic billing for my account?

    How can I remove my credit card from the automatic billing for my account?

    The following has instructions for changing iTunes payment method: http://support.apple.com/kb/ht1918

  • I have just upgraded from Lightroom 5 standalone to Lightroom 6 standalone. I ppear to have been automatically enrolled for a 30 day free trial of Lightroom mobile and Creative Cloud. Reading the FAQ, it appears that after the expiry of the free trial I w

    I have just upgraded from Lightroom 5 standalone to Lightroom 6 standalone. I appear to have been automatically enrolled for a 30 day free trial of Lightroom Mobile and Creative Cloud. Reading the FAQ, it appears that after the expiry of the free trial, if I do not sign up and pay, I will only be able to view my pictures on the desktop but not edit them - surely this cannot be true. How do I un-enroll for the 30 day free trial of Lightroom Mobile and CC?

    When I was signed into Adobe (which was a requirement for installing the upgrade), Lightroom 6 told my at the top right corner that I had 30 days left of my free trial of Lightroom Mobile and Creative Cloud. In parallel with this forum posting, I am chatting with Adobe support. he is away to find out how to prevent any synching with Creative Cloud during the 30 day free trial. I do not think that Creative Cloud is an application that gets installed on your PC. I think Lightroom 6 has it built in, and can use it if if you are signed up to the Creative Cloud and Lightroom Mobile (which I am for 30 days)

  • Confirmation for Service PO from SRM to R/3

    Hi All,
    We are using SRM 3.0, EBP 4.0 ECS and R/3 4.6C.
    I have posted confirmations for a Service PO successfully in SRM and a GR and Service Entry Sheet has been posted in R/3 correspondingly. However some of the confirmation results in the status "Currently being transferred" and R/3 does not get updated with GR and Service Entry Sheet.
    I have checked that the workflow has processed succesfully and it is in 'Completed" status.
    Our observation -  While posting cofirmation for a Goods PO, the GR is posted in R/3 using IDOC. We can trace the same in transaction WE02. While posting confirmation for a Service PO, GR and Service Entry Sheet is posted in R/3, however not sure how this is posted as we are not able to trace any IDOC for a Service PO confirmation.
    I need to know how confirmation is posted for a Service PO.
    Any pointers to resolve the above issue would be highly appreciated.
    Thanks in advance,
    Francis

    Hi Francis,
    Please refer to the following threads for some ideas:
    Confirmation not transferred to backend R/3
    Re: PO confirmation havinmg status error in transmission
    Re: Coudnt create confirmation or Invoice from EBP
    Cheers,
    Serguei

  • How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!

    How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!

    Whilst I appreciate your responding - I do not think this helps with what I was enquiring (at least not without further explanations anyways).
    I am aware of, and do use, the function - System Preferences > Keyboard > Text - for various replacements like (tm), (c), etc .... and also for fractions like 1/2, 1/4, 1/3.
    However, my question was in relation to SUPERSCRIPTS for dates / numbers - namely, superscripting numerical suffixes for things like 1st, 2nd, 3rd, 4th,
    So - please help - HOW do I set this up ? If indeed it is possible without System Preferences > Keyboard > Text ???

  • I have a MacBook Air, it automatically minimises and switches from the screen I am in for some reason ?

    I have a MacBook Air, it automatically minimises and switches from the screen I am in for some reason ?

    This problem is often caused by "Google Drive." If it's installed, I suggest you first check for an update. If that doesn't solve the problem, remove it according to the developer's instructions. You may need to boot in safe mode to do so. Back up all data before making any changes.
    If you use Google Drive and don't want to remove it, then try deselecting the option in its preferences to "show status icons." According to reports, that may be enough to stop the Finder from crashing.

  • How do I stop Imovie from automatically searching for videos when I open up program. I can't do anything when this happens. I checked my pref and it's not set to automatically do this.

    How do I stop Imovie from automatically searching for videos when I open the program. It will not allow me to do anything and I cannot start a new session.

  • Automatic Transfer Order for GR from External vendor and from Process Order

    Hi Expert
    We need to implement the logic for automatic transfer order,
    the Idea when we Receive the Goods from Vendor and while posting goods via Migo we want that the system create automatically the TO.
    the same approach to be implemented for GR from Process Order we need that the system create TO directly to the right Bin
    Your support is higly recommanded
    Olfa

    Many thanks for your support
    I made what you illustrated in your previous message for the Mvt type 501:
    There is a pop up screen which displayed asking me to create TO for Material Document
    Please find attached the related screens
    And please note that the Material Master was updated accordingly
    Please note
    Please correct me if I made a wrong step
    Regards

  • When I open itunes on my laptop, how do i stop itunes from automatically prompting for my apple account info?

    When I open itunes on my laptop, and I have connected my iPod Touch, how do I stop itunes from automatically prompting for my apple account info?  I'm usually not intending to make any purchases at that time, so do they need to know my account info?

    Rented movies downloaded to an Apple TV can't be transferred to any other device.
    (86941)

  • HT4098 I was automatically renewed for a subscription, and didn't realize this until I got the notice.  I want the bill reversed from my account.  How do I do that?

    I was automatically renewed for a subscription, and I didn't realize it until I got the renewal message.  How do I get this charge reversed.  It was renewed yesterday!

    All purchases are considered final, but you can try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • SAP APO CTP but NO wish for automatic confirmation on ALL codes

    Hi all you lovely people.
    We are in the middle of
    going into APO CTP, but we don't want automatic confirmation on ALL our codes
    towards our forecast created PReq, and to use Total Replenishment Lead Time as
    restriction is NOT possible in all cases.
    I need a possibility that
    can limit the automatic confirmation on requests as Sales Orders or STO, if
    they are above X pcs.
    On some codes X will be 0 and in others unlimited.
    Any experience or ideas ?
    Many thanks in advance and kindest regards.
    Dorte Krieger
    Denmark

    Hi all you lovely people.
    We are in the middle of
    going into APO CTP, but we don't want automatic confirmation on ALL our codes
    towards our forecast created PReq, and to use Total Replenishment Lead Time as
    restriction is NOT possible in all cases.
    I need a possibility that
    can limit the automatic confirmation on requests as Sales Orders or STO, if
    they are above X pcs.
    On some codes X will be 0 and in others unlimited.
    Any experience or ideas ?
    Many thanks in advance and kindest regards.
    Dorte Krieger
    Denmark

Maybe you are looking for

  • Runtime Error in IE 5.5

    Hi, maybe someone can help me. We have an application that users access by going to a website. One of the users has an error, continually, when trying to access the application (or site). We setup the client the same way on any machine: we take a fol

  • Itunes 10.5 no text in iphone tab

    When i plug my phone into my computer and open itunes my Iphone 4 is recognized. the tab on the left of itunes says "my iphone 4" when i click on the tab, it opens as usual except all of the tabs in itunes (in my iphone 4 tab) are all blank. the upda

  • How to Send Idoc Acknowledgements back to Http sender (Http to Idoc)

    Hi I have scenario: Http To Idoc first requirment: i need to map xml file come from HTTP Sender to Idoc (SAP system), and need to send Idoc acknowledgements/status back to Http sender. second requirment: while mapping COM Xml file come from Http to C

  • Is there any way to adjust multiple images?

    i don't see any saves settings options and selecting multiple items while making adjustments does nothing. can you really not apply edits concurrently?

  • Photos look grainy

    When I add still shots they look really grainy on my PC. Is this normal? A photo in particular is 1.68MB so it's not like it is small.