No automatic updation for IT0008. Allowance Grouping not found.

Hi
Guys whenever i am saving any employees 0581 it by giving metro,city allowances information in PA 30 i am getting the message "No automatic updation for IT0008. Allowance Grouping not found".
Can anybody tell what the reason behind it?
Regards
Surajit

Hi Sikindar,
Request you to let me know, if in table V_512W_D, in the cumulations column 14-HRA Basis, if there should be a check for wage type M230.
Would this solve the problem of automatic updation on infotype 0008??
Priority:HIGH
Thanks in advance,
Regards,
Angel

Similar Messages

  • No automatic updation for IT0008;Relevant wagetype not found

    Dear Friends,
    When we are trying to update IT0583 with any conveyance type, system is throwing error.
    I  have checked the following tables (V_T7INC*, V_T7INA9) including the one mentioned in the message (V_T7INC9).
    However, we did not find any discrepancy. Please let us know the issue.
    Regards,
    Niladri

    Hi Niladri,
    Kindly check following following:
    1. In table "V_T7INA9" you have to include that respective wage type in respective allowance groupings.
    2. Need to check table "V_T510
    Please check these entries and let me know.
    Regards,
    Venkat Polisetty.

  • Error "No automatic updation for IT0008. Allowance Grouping not found"

    I am maintaining IT581 of an employee.but system throws an error -->No automatic updation for IT0008. Allowance Grouping not found.I have maintained allowance grouping properly.The thing is my requirement is that i am maintening pay groups and level in table T710 instead of T510.Not touched T510.
    Means i have also created IT1005(Planned compensation) in OM.Every other thing is ok.Except IT581.
    What i beleive is its taking  assignement from table V_T7INA3.where i am not able to store ESG for CAP, groups and levels.Because its taking value from T510.But i want to do everything on basis of pay scale grade ie T710.
    Need your help and inputs....

    Dear Sumo,
    Kindly update feature 40 ECC which will help to automatic open the IT0008 for autmatic updation of such wagetypes ex: HRA
    you can maintain percentage their for the particular wagetype for
    40ECS - HR-IN : Feature to Determine Elgibility for RAPS
    This feature is used to determine the factor which is multiplied with
    the Reimbursement, Allowance or Perk (RAP) amount to calculate the
    amount payable to the employee.
    rocedure
    The factor can be arrived at by making a decision on the following
    details:
    Country Grouping
    Company Code
    Payscale Grouping for Allowances
    Wage Type
    Gender Key
    Number of children for children education allowance
    Number of children for children hostel allowance
    Personnel Number
    ample
    As per company A's policy, all employees belonging to the Payscale
    Grouping for Allowance MN01, receive twice the amount eligible for
    Childrens' Education Allowance (wagetype M260) in case the employee has
    two or more children.
    1           D   MOLGA
    2   **          &ELIAL=1
    3   40      D   LGART
    4   40 ****     &ELIAL=1
    5   40 M260 D   CEANO
    6   40 M260 *   &ELIAL=2
    7   40 M260 1   &ELIAL=1
    kindly update the same and let me know.
    rgds,
    priyanka

  • How do I turn off automatic updating for iPod on iTunes?

    I am about to buy the new iPod and I just recently downloaded iTunes 6 so I can actually have music on it when I buy it. Now I know it's possible, but I'm not sure how to turn off the automatic updates for the iPod. See I just want the songs on my computer long enough to put them on my iPod and then I plan to take them off. Any help would be appreciated.

    edit>preferences>ipod
    You will only be able to change these when teh iPod is conncted

  • Is Using the Automatic Update for Flash Player Safe? It is Installed In System Preferences On My Mac

    Hello-
    One day I noticed that there was an icon on my MacBook Pro of Adobe Flash on the last row of system Preferences.  I had never seen it before, and I had ben using Flash for a long time and updating it regularly.
    It recently told me there is a newer version.  I did not let it install it because I am having so many problems with viewing Flash Videos on websites.  I have a MacBook Pro, Mac OS X 10.6.8.  I use Safari 5.1.5, the latest as far as I know.
    In using this automatic updater for Flash (there are actually several tabs when I click the Adobe icon not just the updater) in the Advanced tab of the Flash Player icon are there any special things I should do if I click yes update?  should I close all the windows, apps, Safari?  do a restart?  I am debating if I should do a Clean Install, wipe all Flash Player off the Mac and just install the latest version rather then letting the updater install the latest version, which I think is 11.2.202.228.  I currently have 11.1.102.64 with a bunch of video issues.
    Thanks for any assistance.

    Replied via PM

  • How do I turn off automatic updates for apps on an iPhone 4S?

    How do I turn off automatic updates for apps on an iPhone 4S?

    I'm not sure but try to turn off "Automatic Downloads". Settings>iTunes&App Stores

  • How to get automatic updates for P750 custom build

    I recently purchased a custom built P750 and want to sign up for automatic updates. There is no option for just a P750 which is my complete model number.
    8GB ram
    I7 2.20GHz
    Windows HP SP1 with all updates installed at this time.
    How can I get automatic updates for this machine and operating system and if so, how do I get signed up for those?
    Should I just choose a model number and pretend it is the model I have? Which number should I choose?
    Jon
    Solved!
    Go to Solution.

    Satellite P750 (PSAY3U-0RF03H)
    All computers in the same part-number family (PSAY3U) are essentially the same. The drivers and utilities for this one should work.
    Satellite P750-BT4G22 (PSAY3U-08703H)
    So go here.
    Hmm. Not many there. So let's go to the equivalent part-number family in Europe (PSAY3E).
    Get those here.
    Lots of ways to wiggle.
    -Jerry

  • Firmware update for officejet x64 could not find printer

    The firmware update for officejet x64 could not find printer.  Printer is on wireless network.

    Hi,
    The firmware update utility does not support wireless connection, it only allow updating the firmware via USB as written on its installation instructions:
    The HP OfficeJet 4620 series printer Firmware flashing (upgrade) requires a wired network or a USB connection.
    DO NOT upgrade the printer firmware in a wirelessly connected printer.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-104396-5&cc=us&dlc=en&lc=en&os=4063&productOid=5101234&sw_lang=
     Try updating the firmware wirelessly as following:
    On your computer open the HP Officejet 4620 software and click the Printer Home Page (EWS) option.
    From the displayed EWS page open teh Web Services tab, then click on Product Update and follow the steps on screen (enable Web Services if it disabled)
    Follow the steps on screen to update the printer.
    If the process fails, temporary connect a USB to the printer and then launch teh firmware update utility once again.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • App store shows new update for program I did not purchase

    App store shows new update for program I did not purchase. This is "CodeBox". When I push button to download update it shows "uknown error". For normal other updates - "update all" not working anymore.
    How to delete this line from updates section now.

    The problem was finally solved. I am writing very simple solution for those who may have same issue. I tried 1st solution proposing to exclude HDD from Spotlight search and then to restore it (delete from exceptions). It worked for some time and removed notification, however later it appeared again. Then I has started thinking that it was caused by data inside some installed SW and it has been proved later. I have started excluding from Sportlight not all HDD but by folder, searching for the problem area. I have discovered that folder Games was causing the issue. Then I have started to delete installed games one by one and have found Game with was triggering this notification (for other SW!). Problem was fixed after deleting this game. Other deleted games could be easily restored from recycle been.

  • Updates for CS6 version 8 (NOT extended)?

    I can't find updates for CS6 version 8 (NOT extended). There are issues:
    Application Manager needed to be upgraded, done.
    When I open the prog and go to Help>Updates it opens my browser to Adobe, not to updates.
    I have uninstalled and reinstalled the prog.
    Same issue persists, mainly when using poly lasso tool. The prog won't let me make a full selection, it jumps and makes it's own selection.
    What a plethora of problems!!  
    Pls be patient with me as I have a broken brain now, and can't follow complicated instructions like I used to. The simpler, the better! Thanks.

    CS6 version 8 of WHAT?
    Tell me what application you're talking about and I'm move you post there.
    Bob

  • How do I STOP automatic updates for firefox & thunderbird?

    How can I STOP automatic updates for firefox & thunderbird?

    Go to Tools > Options, Advanced, Update.
    Under "automatically check for updates," uncheck the box next to Firefox.
    Then click the button next to "ask me" under
    "[[https://support.mozilla.com/en-US/questions/872089 When updates to Firefox are found]]"
    If you don't see anything, wait eleven minutes and try again.

  • Sir since update of ios 8.1.2 i got serious battery problem on 3g 4.30 hrs my battery gets low and sometimes serious net probelms please give an update for this issue its not alone me my friends too getting many problem lcommonly battery problem

    sir since update of ios 8.1.2 i got serious battery problem on 3g 4.30 hrs my battery gets low and sometimes serious net probelms please give an update for this issue its not alone me my friends too getting many problem commonly battery problem please can this be resolved
    its not related to any hardware because last year april i got replacement new phone from apple and i maintained it well...!

    Probably apps running in the background are causing this, sometimes Mail get's stuck connecting to the mail server, or some social media app like Facebook can also be a reason for prolonged background activity.
    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Also take a look at these tips to prolong the battery life again:
    http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

  • Why didn't my ios 6 update for my ipad 2 not come with siri?

    Why didn't my ios 6 update for my ipad 2 not come with siri?

    Siri is iPad 3+. The 1 and 2 most likely lack the hardware to make the software work properly

  • How do i get iOS updates for my ipad?  I never received an automatic update for it.

    how do i get iOS updates for my ipad?  I never received an automatic update for it.

    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • "Settings for material number conversion not found" occurs when ...

    After I run an initial load data into the InfoCube 0PUR_C01, I want to check the InfoCube Content by the following path:
    RSA1 -> pick up the InfoCube 0PUR_C01, right click it and select Manage -> Get to Content tab -> Click InfoCube Content button -> Deselect all selection, only tick the 1st column checkbox next to 0Material, then hit enter, get a small window titled as "Cancel" with a red STOP msg sysing "Settings for material number conversion not found" with an "Exit" button and a question mark button, click Exit button leads to SAP Easy Access screen, if clicking the question mark button, another window pops up with the msg showed above, click Technical Information button causes the original window short dump and the short dump msg shows below in between two dashed lines:
    Runtime Errors         RPERF_ILLEGAL_STATEMENT
    Date and Time          11/28/2005 14:43:13
    ShrtText
        Statement "CALL SCREEN" is not allowed in this form.
    What happened?
        Error in ABAP application program.
        The current ABAP program "SAPLSHL2" had to be terminated because on
        statements could not be executed.
        This is probably due to an error in the ABAP program.
    Error analysis
        There is probably an error in the program
        "SAPLSHL2".
        The program was probably called in a conversion exit
        or in a field exit. These are implemented by
        function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or
        USER_EXIT_xxxxx_INPUT.
        Conversion exits are triggered during screen field transports or
        WRITE statements, field exits during field transports from the
        screen to the ABAP/4 program.
        In this connection, the following ABAP/4 statements are not allowed:
        -  CALL SCREEN
        -  CALL DIALOG
        -  CALL TRANSACTION
        -  SUBMIT
        -  MESSAGE W... and MESSAGE I...
        -  COMMIT WORK, ROLLBACK WORK
        -  COMMUNICATION RECEIVE
        -  STOP
        -  REJECT
        -  EXIT FROM STEP-LOOP
        Moreover, conversion exits for output conversion
        (implemented by function modules called
        CONVERSION_EXIT_xxxxx_OUTPUT) do not allow
        -  MESSAGE E...
        to be used.
    Trigger Location of Runtime Error
    Program                                 SAPLSHL2
    Include                                 LSHL2F19
    Row                                     3
    Module type                             (FORM)
    Module Name                             TECHNISCHE_INFO5
    rce Code Extract
    e  SourceCde
    1 ***INCLUDE LSHL2F19 .
    2 form technische_info5.
    >>   call screen 1900 starting at 5  8.
    4 endform.
    5
    6 &----
    7 *&      Form  SHRINK_VALUES
    8 &----
    9 *       text                                                           *
    10 ----
    11 *  -->  p1        text
    12 *  <--  p2        text
    13 ----
    14 form shrink_values.
    15
    16   loop at dynpselect.
    17     clear checktable.
    18     if dynpvaluetab-lowvalue ne space and dynpvaluetab-lowvalue na '*'.
    19       move 'EQ' to checktable-op.
    20       move dynpvaluetab-lowvalue to checktable-low_value.
    21       append checktable.
    22     endif.
    What could cause the problem by selecting only 0Material when checking the InfoCube 0PUR_C01 content?  What does that mean by this STOP msg "Settings for material number conversion not found"?
    Thanks

    Hi Kevin,
    Set the length of 0MATERIAL and change conversion to alpha:
    Re: Error Installing 0MATERIAL from Business Content
    Best regards,
    Eugene

Maybe you are looking for

  • Index import is not working

    I have TCS II, and I have a RoboHelp project linked to a FrameMaker book. The import goes OK for the most part, but I'm having issues with the index (and the TOC, but I created that manually in RH). FM generated my index without issues, but when I tr

  • Apple tv (2nd gen) freezes up while watching movies on Netflix. Only sometimes not on every movie. Any ideas how to fix?

    Sometimes when I watch a movie on Netflix on my apple tv it will sometimes pause and freeze for an extended period of time. It happens on about 1 out of every 5 movies I watch. If I watch a movie on my iMac (which is in the same room) I don't have an

  • How to find out if a track is already in a playlist and which one

    Is there any way of clicking on a song in the Music section, and finding out what playlists its currently in? It would help me a great deal if so. Maybe a feature to be added if its not already? Thanks James

  • Function Module to find Fully Invoice PO

    Hi all,        Is there any function module to find Fully Invoice PO?        Or       Tell me the tables from where can i get the details of Fully Invoiced PO?

  • Color of Tabstrip

    Hello Experts, I am using the htmlb:tabStrip in my application and I want to change the background color in to white. the sample of code is here <htmlb:tabStrip id="tbstrp" width="95%"  bodyColor = "white"  selection="<%=selection%>" > but the color