No automatic video card switching in Safari
I have a new MBP and there is no automatic video car switching when using safari. It's evident that while watching a streaming video (ie. CNN, youtube, etc) that when I manually switch from intel to the dedicated graphics card, that there is improved the performance. Why doesn't the video card switch automatically in this case? Moreover, I have never witnessed the video card switch in Safari at all?
A temporary fix is to do this;
1.) Remove the file 'QuickTimePlugin.webplugin', located in '/HD/Library/Internet-Plugins'
2.) Relaunch Safari
External Quicktime playback controls such as on the Apple website will not work but at least movies play, giving some functionality back.
I can only verify this workaround works on 10.4.11 G4 machine.
Guessing there is a compatibility problem with the .webplugin component and Safari rather than Quicktime as a whole - hope this fix works for everyone until the next major upgrade or bugfix.
Similar Messages
-
Photoshop CS6 running extremely slow after graphics card switch
My old graphics card died (a evga 8800 Ultra Superclocked 756MB 384 bit), so I replaced it with a (XFX HD-455X-ZAFR Radeon HD 4550 1GB 64-bit DDR2 PCI Express 2.0 x16 ). I knew this was a less capable card but from reading other forums it seemed that GPU performance was not as big of an issue in Photoshop and the 4550 was a supported card by Photoshop. However, I was previously able to batch open about 15 (ish) photos at a time to work on in Photoshop. Now if I open more than 1 everything is VERY slow and even that 1 doesn't open as fast. Bigger photos appear blurry (but when I zoom in they are not) many filters are slower. Very annoying. Nothing else has changed on my computer, just the graphics card. Here are my specs (I know I need more RAM and have been considering an upgrade there but am not sure if I need to ditch my current video card as well)
Asustek p5e3 motherboard
Core 2 extreme qx9650 (quad core at 3.0 ghz)
4 GB of DDR3 1333mhz ram
(3) 500 GB 7200RPM hard drives
Radeon HD 4550 1GB 64-bit DDR2
500 Watt Power SupplyI don't mean to be critical, but why would you upgrade to an outdated card like the 4550? The 4000-series isn't even listed under the cards Photoshop is tested with any more.
Tested video cards for Photoshop CC and CC 2014
That said, a problem that can happen with a video card switch is that drivers get left in the system from the old one.
Maybe it would be a good start in diagnosing this for you go to into the Help - System Info menu, copy the data in the whole first section, and post it here.
-Noel -
MBP 2011 Discrete Video Card Freezes iTunes
I just got an MBP 2011 17" 2.2Ghz i7. I have not run into any overheating issues (as addressed in other topics). However, I have isolated a very odd conflict with iTunes and the discrete video card. I can play games such as Starcraft 2 using the discrete graphics card without incident, so the card itself seems to be working fine. Somehow iTunes brings it to it's knees, though.
If I am using dynamic video card switching or have the discrete card selected and open iTunes, the entire OS locks up for about 10 seconds at a time, with about 1 second in between each lockup where things process. My mouse is free, but other applications are also locked up. If I quit iTunes, the problem goes away within 10 seconds or so. If I switch to using the integrated graphics, I can open iTunes and use it without a problem, no lockups at all.
I have tried completely removing iTunes (including all applicable plists, etc), then re-installing. No change. I have also tried re-installing Snow Leopard entirely and opening iTunes immediately after install. No change, still locks up. The Console app does not report anything relating to the issue that I can see.
I have the problem isolated and repeatable. There is some conflict between iTunes and the AMD Radeon HD 6750 discrete video card. Is this happening to anyone else? Does anyone have any ideas to try? Or is this just something that will be fixed by a new video card driver released by Apple in the near term?Hi,
I do have the problems to, didn't know it was a problem of iTunes. I thought it might be my ram(changed it myself to 8GB ram to save 160$!), or my harddrive(changed it to 7200rpm that i already had).
Greetings,
TNAJanssen -
Dual video cards in hp P7-1228 fails to start
installing 2 PCI-e video cards, switched to legacy startup and 6 beeps are now replaced with stuck boot screen and a small beep every few minutes as the system seems to go nowhere and is unresponsice to 'pressing escape for startup menu'
I am willing to abandon the integrated card to use the two new ones.
they are identical Zotac GeForce GT 730 1 GB cards, they have no external power requirementsBig Dave, I am so grateful you wrote back! I do support for a living too but this one has me stumped.
Zotac is the maker, it is a NVIDIA gefource GT 730 1 GB 64bit DDR3 card requires no external power
http://www.amazon.com/gp/product/B00LZKWVJW/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Machine has Win7 64 bit, 8GB ram
with one card it goes to the blue HP boot screen and freezes, after a few minutes there's a rather wimpy beep [sounds like a restart beep] but the screen stays frozen for another 30 seconds or so then goes to black screen and then nothing. Fans etc. still running but it's gone...
switched to legacy startup and 6 beeps are now replaced with stuck boot screen and a small beep every few minutes as the system seems to go nowhere and is unresponsice to 'pressing escape for startup menu'
Can't think of any mor to tell you but am totally hopful you'll have some ideas!!
Mahalo
Gill -
Dual video cards in hp P7-1228
installing 2 PCI-e video cards, switched to legacy startup and 6 beeps are now replaced with stuck boot screen and a small beep every few minutes as the system seems to go nowhere and is unresponsice to 'pressing escape for startup menu'
Hi,
How can you install 2 video card when it only has ONE slot do you mean you add one video card?
Video graphicsIntel Graphics Media Accelerator HD Integrated graphics (DX10.1)*Integrated video is not available if a graphics card is installed.
Supports PCI Express x16 graphics cards
DVI and VGA ports (both ports can be used at the same time)
Source: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03209846
Your machine has only 300W PSU, I would check the minimum power requirement for the new card.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Quick question. I've just bought a MBP 2.4 late 2008 with the dual video chips.
I spend most of my days in Word, Excel, Visio/Omnigraffle etc. and don't play games. I tend to run Windows in Parallels or VMW depending on the app I need.
Given this, I assume then there's little benefit to me switching to the higher performance card other than helping to keep my hands warm?
ThanksHi Stefan:
A question for you: I have a brand new Macbook Pro (late 2008 model). For some reason, when I have it set to the higher performance video card, certain websites that seem to use a lot of Flash, have problems displaying (the screen flashes randomly in a "building block" fashion), but when I change to the lower performance card the problems disappear. Is this normal, is it some sort of defect and is there anything I can do (firmware update, etc), to fix it?
Thanks much!
B. -
Macbook Pro Unibody 2008 freezes when switching video cards
I hava a Macbook Pro unibody late 2008 running Snow Leopard and I have noticed that whenever I switch from one video card to another the system completely freezes after a while. It does not happen while doing something specific or intensive. It seems to be completely random. I have searched in forums and found out that other users are experiencing the same issue but I have found no solution yet. Does anyone know of some way to fix this?
Try resetting your computer's SMC:
http://support.apple.com/kb/HT3964
If that doesn't resolve the issue, you may want to download and install AppleJack, a free, open-source utility that runs in Single User Mode and that has sorted out occasional problems with sleep, failure to shut down, etc. on my machines.
http://applejack.sourceforge.net/ -
CPU & Video card Upgrade - Motherboard manual, GPIO switch settings, BIOS update or ?
According to the HP TouchSmart 600-1120 Desktop PC Product Specifications page the motherboard supports the following CPUs:
Motherboard supports the following processor upgrades:
Intel Core i7 820QM Quad Core (C)
Intel Core i7 720QM Quad Core (C)
Intel Core i7 620M Dual Core (A)
Intel Core i5 5x0M Dual Core (A)
Intel Core i5 430M Dual Core (A)
I upgraded mine with the Intel Core i7 720QM Quad Core. The two Quad Cord i7 processors do not have a GPU Video chip integrated on the CPU fab like the listed Dual Core processors, and therefore neccesate the need for an external video card.
According to the HP TouchSmart 600-1120 Desktop PC Product Specifications page the motherboard supports One Mobile PCI Express Module (MXM) socket MXM version: 3.0, type A.
HP offered the NVIDIA GeForce GT 230 1GB DDR3 MXM Video Card , part # 513184-001 as an upgrade option on HP Touchsmart 600's, one would assume you could simply purchase this video card, and with either of these "supported" CPUs Intel Core i7 820QM Quad Core or Intel Core i7 720QM Quad Core and you would be in business, but NOOOO, it does not work!
I tried it on mine, using the Intel Core i7 720QM Quad Core and HP NVIDIA GeForce GT 230 1GB DDR3 MXM Video Card. The display cycles through various colors, but does not actually provide a usable display. I can tell the system does boot into Windows 7 (you can hear it) , but you cannot see anything.
There's a bank of DIP switches on the motherboard labled GPIO, which I'd assume is Graphics Processor Input Output, and perhaps there's a switch combo to switch from the Intel CPU/GPU to the MXM slot GPU??? i
I'm unable to find anywhere a manual on the Pentragram motherboard, this may tell how to set said GPIO dip switch if that's what needs to happen?
HP HELP!!! Your site says the HP Touchsmart is upgradable to the above Intel Quad Core i7 and MXM Video card, BUT HOW?????Hi,
I suspect the NVIDIA GTX 760 that you are using is expecting a different BIOS level in the motherboard. Most of the NVIDIA 760s that have experienced compatibility issues pretty much have been with HP motherboards that don't have version 8 or 80 BIOS level. The HPE h8-1075UK only has a version 7 BIOS level.
MSI has two "N" model NVIDIA GTX 750 and 750 TI graphic cards that have a switch to allow compatibility with legacy and UEFI BIOS PCs.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
How can I switch between 2 installed video cards?
I have an HP Pavilion dv7-6135dx Entertainment Notebook PC, Windows 7 64-bit. It has two video cards, one is a Mobile Intel(R) HD Graphics card attached to the motherboard, the other is an AMD Radeon HD 6490M video card meant for gaming. The problem is that the computer and all the games and software I install on it only pickup on the Intel HD card, not the Radeon. I have the Catalyst Control Center for the Radeon card and it shows up in the device manager meaning the computer recognizes the card, but I can't download any drivers for the Radeon card from the Internet and nothing else seems to recognize it. This Radeon card series, 6400M, has OpenGL 4.1 and 3D graphics, the amd.com site specifically states this, but games with 3D or which require OpenGL, such as Bethesda's Brink, won't play. The errors say my graphics card does not support 3D or, in Brink's case, it doesn't have OpenGL 3.1 or higher. I'm assuming something is blocking the Radeon Card from working or I need to set the computer to use the Radeon card 24/7. Any help what so ever would be very much appreciated.
Yes I just used HP to install the drivers. It worked unlike the AMD website, but it still doesn't seem to be working. It has all the updates now, but games stil don't seem to recognize the Radeon card, just the Intel HD video card.
-
Switching video cards crashes to black screen
Owner of a MPB 6.2 from new, with an intel HD Graphics and an NVIDIA GeForce GT 330M, intel Core i5. OSX 10.6.8
Initially I had the screen going black with a few pixel white line on the top left part of the screen during the hot months of the summer, and I though it was just a little glich due to temperatures and due to connecting or disconnecting the power supply. But in the last couple of days, it has happen everytime, I connected/disconnected the power supply. I do not think the power supply is at fault, but as I connect or disconnet the PS it forces a graphic card switch and it goes black.
I use gfx CardStatus, so I know when it switches from the Intel to the NVIDIA et vis et versa.
Also with no PS connected, when I switch manually using gfx, forcing the MBP to run from only one graphic card, it just bring the screen to black with that little hazy little white line running half way through from the top left coner of the screen. The computer carries on working normally as I have noticed while streaming and it is just the screen going black.
The only way to bring back the screen display, is to do a force shutdown and a reboot, hoping that the card is not going to switch while doing important stuff.
In any case it is very annoying, scary, and a design fault of somesort from the factory.
I do not have any apple care, out of warrenty, and only in the last couple of days I can reproduce it systematically at every switch of card.
Is there any replacement scheme put in place for this fault? or what is the solution if any?
Many thanks in advance as usually.Hello and welcome..
(yes I have many loaded)
Make sure there's enough space...
Connect your iPad to your computer. Launch iTunes. Select the Summary tab. Look at the bottom of the window for available storage space.
Carolyn -
Fglrx not finding my video card
holla balloj!
vid card: ATI radeon X850XT on a x86_64
Uncommonly enough i have some ati drivers that doesn't wanna do what i tell em to do. And it seem to be the fglrx module that cant find my card and then the fglrx(0) shows up and it seem like my dear X buddy is loading the vesa driver and thus i can't watch the one and only season of Firefly in a druuling 720p quality.
Please help me see Firefly in 720p
(and switch desktops without 2 secs delays etc etc (including to play a number of pc games))
Xorg.conf
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "AllowEmptyInput" "0"
EndSection
Section "Files"
EndSection
Section "Module"
Load "freetype"
# Load "xtt"
Load "extmod"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "dvorak"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 90.0
VertRefresh 50.0 - 70.0
EndSection
Section "Device"
Identifier "Card0"
Driver "fglrx"
Card "** ATI Radeon (generic) [radeon]"
BusID "PCI:5:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1600x1200" "1280x1024" "1024x768"
EndSubSection
EndSection
And the log!
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH x86_64
Current Operating System: Linux juppaCom 2.6.27-ARCH #1 SMP PREEMPT Sun Dec 21 09:13:30 UTC 2008 x86_64
Build Date: 17 December 2008 10:46:49PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 28 02:42:13 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "AllowEmptyInput" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7b54e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@5:0:0) ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Primary) rev 0, Mem @ 0xd0000000/268435456, 0xfd7f0000/65536, I/O @ 0x00006c00/256, BIOS @ 0x????????/131072
(--) PCI: (0@5:0:1) ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Secondary) rev 0, Mem @ 0xfd7e0000/65536
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX disabled
(WW) fglrx: Force AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 05@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.56.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.561
(II) ATI Proprietary Linux Driver Build Date: Dec 1 2008 14:56:52
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(WW) fglrx: No matching Device section for instance (BusID PCI:0@5:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x5D52) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@5:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x181c200
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[22] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): PCI bus 5 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.56.4
ABI class: X.Org Server Extension, version 1.1
(--) fglrx(0): Chipset: "RADEON X850 XT" (Chipset = 0x5d52)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0b12)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfd7f0000
(--) fglrx(0): I/O port at 0x00006c00
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.7
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2003, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R480
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) fglrx(0): Using adapter: 5:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000001, disabled=0x00000000
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PHL Model: e01e Serial#: 717343
(II) fglrx(0): Year: 2005 Week: 3
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max Image Size [cm]: horiz.: 36 vert.: 27
(II) fglrx(0): Gamma: 2.96
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): GTF timings supported
(II) fglrx(0): redX: 0.631 redY: 0.329 greenX: 0.276 greenY: 0.600
(II) fglrx(0): blueX: 0.143 blueY: 0.057 whiteX: 0.283 whiteY: 0.297
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 720x400@88Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #1: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) fglrx(0): #3: hsize: 1920 vsize 1440 refresh: 60 vid: 16593
(II) fglrx(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 65 vid: 17833
(II) fglrx(0): #6: hsize: 1280 vsize 960 refresh: 85 vid: 22913
(II) fglrx(0): #7: hsize: 1600 vsize 1200 refresh: 70 vid: 19113
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 202.0 MHz Image Size: 360 x 270 mm
(II) fglrx(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) fglrx(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) fglrx(0): Serial No: CX 717343
(II) fglrx(0): Monitor name: PHILIPS 109B6
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 97 kHz, PixClock max 230 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff00410c1ee01ff20a00
(II) fglrx(0): 030f010368241bc4ef9ea8a154469924
(II) fglrx(0): 0e484cffef80455961598199d140a940
(II) fglrx(0): a9458159a94ae84e403062b0324040c0
(II) fglrx(0): 1300680e1100001e000000ff00204358
(II) fglrx(0): 20203731373334330a20000000fc0050
(II) fglrx(0): 48494c495053203130394236000000fd
(II) fglrx(0): 0032a01e6117000a2020202020200006
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 520/540MHz @ 0Hz [enable load balancing]
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 27 modes found for primary display.
(--) fglrx(0): Virtual size is 1600x1200 (pitch 0)
(**) fglrx(0): *Mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 (75.0 kHz)
(**) fglrx(0): *Mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync (74.6 kHz)
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +vsync (55.9 kHz)
(**) fglrx(0): Default mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync (65.3 kHz)
(**) fglrx(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"x70.0 96.76 1152 1224 1344 1536 864 865 868 900 +hsync (63.0 kHz)
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x47.0 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync (43.0 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): Default mode "960x720": 55.9 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "960x720"x60.0 55.85 960 1008 1104 1248 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): Default mode "864x648": 45.1 MHz (scaled from 0.0 MHz), 40.2 kHz, 60.0 Hz
(II) fglrx(0): Modeline "864x648"x60.0 45.08 864 904 992 1120 648 649 652 671 +hsync (40.2 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"x60.0 32.66 720 744 816 912 576 577 580 597 +hsync (35.8 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(--) fglrx(0): Display dimensions: (360, 270) mm
(--) fglrx(0): DPI set to (112, 112)
(--) fglrx(0): Virtual size is 1600x1200 (pitch 1600)
(**) fglrx(0): *Mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 (75.0 kHz)
(**) fglrx(0): *Mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync (74.6 kHz)
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +vsync (55.9 kHz)
(**) fglrx(0): Default mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync (65.3 kHz)
(**) fglrx(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): Default mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): Default mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"x70.0 96.76 1152 1224 1344 1536 864 865 868 900 +hsync (63.0 kHz)
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x47.0 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync (43.0 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): Default mode "960x720": 55.9 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "960x720"x60.0 55.85 960 1008 1104 1248 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): Default mode "864x648": 45.1 MHz (scaled from 0.0 MHz), 40.2 kHz, 60.0 Hz
(II) fglrx(0): Modeline "864x648"x60.0 45.08 864 904 992 1120 648 649 652 671 +hsync (40.2 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"x60.0 32.66 720 744 816 912 576 577 580 597 +hsync (35.8 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 4.1
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000b
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [pcie] 262144 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Interrupt handler installed at IRQ 18.
(II) fglrx(0): Exposed events to the /proc interface
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[22] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(II) fglrx(0): detected X.org 7.4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:5:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0x7fd22f841000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.56.4
(II) fglrx(0): Date: Dec 1 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.27-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x00960000
(II) fglrx(0): FBMM initialized for area (0,0)-(1600,1536)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1200) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1600 x 336
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
24 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "dvorak"
(**) Keyboard0: XkbLayout: "dvorak"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) Mouse0: ps2EnableDataReporting: succeeded
output of lspci
05:00.0 VGA compatible controller: ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Primary)
05:00.1 Display controller: ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Secondary)
Ive tried telling my dear drivers where the graph card is by extracting the info from lspci and put in
"PCI:5:0:0"
But that doesn't seem to help (and 5:0:1 makes the X go bananas and refuse to start, but i have no idea why i have two of them pci busses occupied by me video card according to pciutils)
Then i realize that the fglrx module probably do find the bus! Just not a device to match with it (that's what the log sais), so after some searching i found something about that maybe the device identifier wasn't created in the /dev dir (/dev/dri/<device identifier>) But of what i could list it actully where there under the name of card0 wich i assumed the card identifier had to be named aswell, but after changing that... no dice. And it seemes like the vesa driver finds the device .
It is for me admitingly weird that when loading the vesa driver Ce X finds my card under /dev/dri/card0 But not from the begging with the "ati-driver"
I reasently switched from debian, after switching from gentoo, after switching from ubuntu. And i remembered that the stable ati driver for the x850xt card didnt work with debians new kernel (!) so had to use the one from the test branch... But trying that here on arch (using the 8.12-2 driver) didnt work either. And unfortunally i cant find the info again on what driver the debian ppl had modified that did and did not work.
It feels like there is some minor fault i myself overlooked the past 3 days, so hope that providing this information to you might make a bell ring out there for someone.
Juppa
PS! hope i didnt confuse you to much, im abit confused by the log and the texts ive read, apparently fglrx is the ati module and catalyst is the driver, but you are sposed to put fglrx as driver in the xorg.conf so it must be the driver? And accorinding to the log it involves the fglrx eh... module when loading the vesa driver, or is the log just telling me that the fglrx module/driver has been disabled (fglrx(0)) and that they went on trying with the vesa driver/module instead?In order to be viewed on the iPhone, YouTube is transcoding all their content to H.264. The initial announcement said- They'll have 10,000 videos ready by June 29th, and should complete transcoding the collection by this fall.
Since there are literally hundreds of thousands of YouTube videos out there (if not more), they just haven't gotten to transcoding your video yet (doing their Most Viewed videos first). -
NVIDIA Issues; hitting the video card hangs the machine
Hello everybody, this could easily be placed under the Kernel and Hardware forum, but this one suits my experience level better. I tried
searching for some similar issues to what I am having, but wasn't able to come up with anything. (Perhaps I was an unknown keyword off in my searches. )
Additionally, thanks in advance for any help! I'm pretty much out of ideas short of replacing some hardware.
My problem is that whenever my desktop displays anything that is graphically intensive, it freezes. I first experienced this while I had Slackware 13.1 installed when trying to run Minecraft. I had been running it successfully for a month or two when it hung while I was playing. I switched over to Arch in the hopes that it would be easier for me to troubleshoot the problem. This was a few months ago, and I've not been able to figure it out.
I'm running with an i7 930 CPU, GTX 480 video card, and six gigs of RAM. My xorg.conf is below:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 270.41.06 ([email protected]) Mon Apr 18 15:14:00 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
I dug through my logs and the only strange thing I found was in kernel.log:
Jul 3 13:56:43 localhost kernel: [ 101.297777] NVRM: GPU at 0000:03:00.0 has fallen off the bus.
For what it's worth, here is my Xorg.0.conf (but the only error is related to my keyboard, which actually works fine):
[ 28.765]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 28.766] X Protocol Version 11, Revision 0
[ 28.766] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 28.766] Current Operating System: Linux myhost 2.6.39-ARCH #1 SMP PREEMPT Mon Jun 27 21:26:22 CEST 2011 x86_64
[ 28.766] Kernel command line: root=/dev/disk/by-uuid/53882ab2-b171-4117-a8a2-6ec984ace8e2 ro
[ 28.767] Build Date: 30 May 2011 08:18:15AM
[ 28.767]
[ 28.767] Current version of pixman: 0.22.0
[ 28.767] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 28.768] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.770] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 3 14:20:49 2011
[ 28.800] (==) Using config file: "/etc/X11/xorg.conf"
[ 28.801] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 28.817] (==) ServerLayout "Layout0"
[ 28.817] (**) |-->Screen "Screen0" (0)
[ 28.817] (**) | |-->Monitor "Monitor0"
[ 28.817] (**) | |-->Device "Device0"
[ 28.817] (**) |-->Input Device "Keyboard0"
[ 28.817] (**) |-->Input Device "Mouse0"
[ 28.817] (==) Automatically adding devices
[ 28.817] (==) Automatically enabling devices
[ 28.837] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 28.837] Entry deleted from font path.
[ 28.837] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 28.837] Entry deleted from font path.
[ 28.837] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 28.837] Entry deleted from font path.
[ 28.857] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 28.857] Entry deleted from font path.
[ 28.857] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 28.857] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 28.857] Entry deleted from font path.
[ 28.858] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 28.858] (==) FontPath set to:
/usr/share/fonts/misc/
[ 28.858] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 28.858] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 28.858] (WW) Disabling Keyboard0
[ 28.858] (WW) Disabling Mouse0
[ 28.858] (II) Loader magic: 0x7d3440
[ 28.858] (II) Module ABI versions:
[ 28.858] X.Org ANSI C Emulation: 0.4
[ 28.858] X.Org Video Driver: 10.0
[ 28.858] X.Org XInput driver : 12.2
[ 28.858] X.Org Server Extension : 5.0
[ 28.859] (--) PCI:*(0:3:0:0) 10de:06c0:10de:075f rev 163, Mem @ 0xdc000000/33554432, 0xc8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000df00/128, BIOS @ 0x????????/524288
[ 28.859] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 28.859] (II) LoadModule: "extmod"
[ 28.878] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.889] (II) Module extmod: vendor="X.Org Foundation"
[ 28.889] compiled for 1.10.2, module version = 1.0.0
[ 28.889] Module class: X.Org Server Extension
[ 28.889] ABI class: X.Org Server Extension, version 5.0
[ 28.889] (II) Loading extension MIT-SCREEN-SAVER
[ 28.889] (II) Loading extension XFree86-VidModeExtension
[ 28.889] (II) Loading extension XFree86-DGA
[ 28.889] (II) Loading extension DPMS
[ 28.889] (II) Loading extension XVideo
[ 28.889] (II) Loading extension XVideo-MotionCompensation
[ 28.889] (II) Loading extension X-Resource
[ 28.889] (II) LoadModule: "dbe"
[ 28.889] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.890] (II) Module dbe: vendor="X.Org Foundation"
[ 28.890] compiled for 1.10.2, module version = 1.0.0
[ 28.890] Module class: X.Org Server Extension
[ 28.890] ABI class: X.Org Server Extension, version 5.0
[ 28.890] (II) Loading extension DOUBLE-BUFFER
[ 28.890] (II) LoadModule: "glx"
[ 28.890] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 29.187] (II) Module glx: vendor="NVIDIA Corporation"
[ 29.195] compiled for 4.0.2, module version = 1.0.0
[ 29.195] Module class: X.Org Server Extension
[ 29.195] (II) NVIDIA GLX Module 275.09.07 Wed Jun 8 14:34:43 PDT 2011
[ 29.195] (II) Loading extension GLX
[ 29.195] (II) LoadModule: "record"
[ 29.195] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 29.196] (II) Module record: vendor="X.Org Foundation"
[ 29.196] compiled for 1.10.2, module version = 1.13.0
[ 29.196] Module class: X.Org Server Extension
[ 29.196] ABI class: X.Org Server Extension, version 5.0
[ 29.196] (II) Loading extension RECORD
[ 29.196] (II) LoadModule: "dri"
[ 29.196] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 29.207] (II) Module dri: vendor="X.Org Foundation"
[ 29.207] compiled for 1.10.2, module version = 1.0.0
[ 29.207] ABI class: X.Org Server Extension, version 5.0
[ 29.207] (II) Loading extension XFree86-DRI
[ 29.207] (II) LoadModule: "dri2"
[ 29.207] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.207] (II) Module dri2: vendor="X.Org Foundation"
[ 29.207] compiled for 1.10.2, module version = 1.2.0
[ 29.207] ABI class: X.Org Server Extension, version 5.0
[ 29.207] (II) Loading extension DRI2
[ 29.207] (II) LoadModule: "nvidia"
[ 29.208] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 29.240] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 29.241] compiled for 4.0.2, module version = 1.0.0
[ 29.241] Module class: X.Org Video Driver
[ 29.246] (II) NVIDIA dlloader X Driver 275.09.07 Wed Jun 8 14:18:12 PDT 2011
[ 29.246] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 29.246] (--) using VT number 7
[ 29.255] (II) Loading sub module "fb"
[ 29.255] (II) LoadModule: "fb"
[ 29.255] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.262] (II) Module fb: vendor="X.Org Foundation"
[ 29.262] compiled for 1.10.2, module version = 1.0.0
[ 29.262] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.262] (II) Loading sub module "wfb"
[ 29.262] (II) LoadModule: "wfb"
[ 29.262] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 29.270] (II) Module wfb: vendor="X.Org Foundation"
[ 29.270] compiled for 1.10.2, module version = 1.0.0
[ 29.270] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.270] (II) Loading sub module "ramdac"
[ 29.270] (II) LoadModule: "ramdac"
[ 29.270] (II) Module "ramdac" already built-in
[ 29.271] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 29.271] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 29.271] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.272] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 29.272] (==) NVIDIA(0): RGB weight 888
[ 29.272] (==) NVIDIA(0): Default visual is TrueColor
[ 29.272] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.069] (II) NVIDIA(GPU-0): Display (AOC 2436 (CRT-1)) does not support NVIDIA 3D Vision
[ 30.069] (II) NVIDIA(GPU-0): stereo.
[ 30.070] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 480 (GF100) at PCI:3:0:0 (GPU-0)
[ 30.070] (--) NVIDIA(0): Memory: 1572864 kBytes
[ 30.070] (--) NVIDIA(0): VideoBIOS: 70.00.21.00.02
[ 30.070] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 30.070] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 30.070] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 480 at PCI:3:0:0
[ 30.070] (--) NVIDIA(0): AOC 2436 (CRT-1)
[ 30.071] (--) NVIDIA(0): AOC 2436 (CRT-1): 400.0 MHz maximum pixel clock
[ 30.109] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 30.109] (==) NVIDIA(0):
[ 30.109] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 30.109] (==) NVIDIA(0): will be used as the requested mode.
[ 30.109] (==) NVIDIA(0):
[ 30.109] (II) NVIDIA(0): Validated modes:
[ 30.109] (II) NVIDIA(0): "nvidia-auto-select"
[ 30.110] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 30.134] (--) NVIDIA(0): DPI set to (93, 94); computed from "UseEdidDpi" X config
[ 30.134] (--) NVIDIA(0): option
[ 30.134] (--) Depth 24 pixmap format is 32 bpp
[ 30.134] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 30.134] (II) NVIDIA: access.
[ 30.144] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 30.144] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 30.144] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 30.144] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 30.144] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 30.144] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 30.144] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 30.144] (II) NVIDIA(0): Config Options in the README.
[ 30.147] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 30.208] (II) Loading extension NV-GLX
[ 30.270] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 30.270] (==) NVIDIA(0): Backing store disabled
[ 30.270] (==) NVIDIA(0): Silken mouse enabled
[ 30.271] (**) NVIDIA(0): DPMS enabled
[ 30.271] (II) Loading extension NV-CONTROL
[ 30.271] (II) Loading extension XINERAMA
[ 30.271] (II) Loading sub module "dri2"
[ 30.271] (II) LoadModule: "dri2"
[ 30.271] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.272] (II) Module dri2: vendor="X.Org Foundation"
[ 30.272] compiled for 1.10.2, module version = 1.2.0
[ 30.272] ABI class: X.Org Server Extension, version 5.0
[ 30.272] (II) NVIDIA(0): [DRI2] Setup complete
[ 30.272] (==) RandR enabled
[ 30.272] (II) Initializing built-in extension Generic Event Extension
[ 30.272] (II) Initializing built-in extension SHAPE
[ 30.272] (II) Initializing built-in extension MIT-SHM
[ 30.272] (II) Initializing built-in extension XInputExtension
[ 30.272] (II) Initializing built-in extension XTEST
[ 30.272] (II) Initializing built-in extension BIG-REQUESTS
[ 30.272] (II) Initializing built-in extension SYNC
[ 30.272] (II) Initializing built-in extension XKEYBOARD
[ 30.272] (II) Initializing built-in extension XC-MISC
[ 30.272] (II) Initializing built-in extension SECURITY
[ 30.272] (II) Initializing built-in extension XINERAMA
[ 30.272] (II) Initializing built-in extension XFIXES
[ 30.272] (II) Initializing built-in extension RENDER
[ 30.272] (II) Initializing built-in extension RANDR
[ 30.272] (II) Initializing built-in extension COMPOSITE
[ 30.272] (II) Initializing built-in extension DAMAGE
[ 30.273] (II) Initializing extension GLX
[ 30.487] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 30.487] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.487] (II) LoadModule: "evdev"
[ 30.499] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.506] (II) Module evdev: vendor="X.Org Foundation"
[ 30.506] compiled for 1.10.0, module version = 2.6.0
[ 30.506] Module class: X.Org XInput Driver
[ 30.506] ABI class: X.Org XInput driver, version 12.2
[ 30.506] (II) Using input driver 'evdev' for 'Power Button'
[ 30.506] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.506] (**) Power Button: always reports core events
[ 30.506] (**) Power Button: Device: "/dev/input/event1"
[ 30.530] (--) Power Button: Found keys
[ 30.530] (II) Power Button: Configuring as keyboard
[ 30.530] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 30.530] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.530] (**) Option "xkb_rules" "evdev"
[ 30.530] (**) Option "xkb_model" "evdev"
[ 30.530] (**) Option "xkb_layout" "us"
[ 30.561] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 30.561] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.561] (II) Using input driver 'evdev' for 'Power Button'
[ 30.561] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.561] (**) Power Button: always reports core events
[ 30.561] (**) Power Button: Device: "/dev/input/event0"
[ 30.583] (--) Power Button: Found keys
[ 30.583] (II) Power Button: Configuring as keyboard
[ 30.583] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 30.583] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.583] (**) Option "xkb_rules" "evdev"
[ 30.583] (**) Option "xkb_model" "evdev"
[ 30.583] (**) Option "xkb_layout" "us"
[ 30.590] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event4)
[ 30.590] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.590] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 30.591] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.591] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 30.591] (**) Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event4"
[ 30.623] (--) Logitech Logitech Illuminated Keyboard: Found keys
[ 30.623] (II) Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 30.623] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.0/input/input4/event4"
[ 30.623] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD)
[ 30.623] (**) Option "xkb_rules" "evdev"
[ 30.624] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event5)
[ 30.624] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.624] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 30.624] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.624] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 30.624] (**) Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event5"
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found relative axes
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found absolute axes
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found keys
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.1/input/input5/event5"
[ 30.650] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD)
[ 30.650] (**) Option "xkb_rules" "evdev"
[ 30.650] (**) Option "xkb_model" "evdev"
[ 30.650] (**) Option "xkb_layout" "us"
[ 30.650] (EE) Logitech Logitech Illuminated Keyboard: failed to initialize for relative axes.
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: initialized for absolute axes.
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[ 30.651] (II) config/udev: Adding input device Microsoft Microsoft Optical Mouse with Tilt Wheel (/dev/input/event6)
[ 30.651] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: Applying InputClass "evdev pointer catchall"
[ 30.651] (II) Using input driver 'evdev' for 'Microsoft Microsoft Optical Mouse with Tilt Wheel'
[ 30.651] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.651] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: always reports core events
[ 30.651] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: Device: "/dev/input/event6"
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found 9 mouse buttons
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found scroll wheel(s)
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found relative axes
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found x and y relative axes
[ 30.676] (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: Configuring as mouse
[ 30.676] (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: Adding scrollwheel support
[ 30.676] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: YAxisMapping: buttons 4 and 5
[ 30.676] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.0/input/input6/event6"
[ 30.676] (II) XINPUT: Adding extended input device "Microsoft Microsoft Optical Mouse with Tilt Wheel" (type: MOUSE)
[ 30.676] (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: initialized for relative axes.
[ 30.676] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) keeping acceleration scheme 1
[ 30.677] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration profile 0
[ 30.677] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration factor: 2.000
[ 30.677] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration threshold: 4
[ 30.677] (II) config/udev: Adding input device Microsoft Microsoft Optical Mouse with Tilt Wheel (/dev/input/mouse0)
[ 30.677] (II) No input driver/identifier specified (ignoring)
[ 30.677] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 30.677] (II) No input driver/identifier specified (ignoring)
[ 30.680] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 30.680] (II) No input driver/identifier specified (ignoring)
The more I investigate, the more I feel like this could be a hardware problem. I checked the CPU temp first, but it only reaches ~32 degrees celsius when the system hangs, so I doubt that's the cause. I've checked the cables (power and otherwise) between everything in my box, and it's all solid. I've also taken the sides off, thinking it my be an air flow issue, but that didn't solve it either.
On the software side of things, I've got nvidia, nvidia-utils, and lib32-nvidia-utils installed and they aren't popping any errors that I can see. When I run glxinfor or glxgears, nothing happens, the terminal just prompts me for input (which is actually an improvement, in Slackware, they hung the machine).
Again, any help on this issue is greatly appreciated, I'm at my wit's end about it.I had a similar problem that turned out to be the graphics card working itself loose. So, if you haven't already, try taking it out, cleaning the contacts and plugging it back in. Worth a try and worked for me
Also, Xorg 1.10.2 & the nvidia proprietary driver don't seem to be in conflict for me so I think williewillus is mistaken. -
Blue screen when attempting to use the dedicated video card
I keep getting a blue screen when attempting to use the dedicated video card.
I managed to install the AMD driver for it but without the other components like the Catalyst Control Center as it blue screened on startup when attempting to load the Catalyst Control Center.
The OS loads fine. Any applications that don't use the dedicated video card runs fine. All other drivers install fine as well.
Applications like games and Photoshop that switch to the dedicated video card on startup automatically crashes, the OS freezes then a blue screen appears.
What could be causing the problem? This problem just recently appeared. Two weeks ago.boogs wrote:
I tried installing the drivers for my laptop from HP's support site. Still the same result.
This problem only appeared a few weeks ago. Before that, the same drivers from the HP site installed and functioned normally.
Could this be a problem with the graphics card itself?
Note sure but if we can know the system P/N others can look to see what drivers it has for the graphics to know what is there.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015- -
My 27" iMac will not boot in normal mode. The screen stays white. The computer will boot in safe mode. Could this be virus related or is it possibly an issue with my video card. Before this happened, my computer screen was flashing weird things and the computer would unexpectedly power down.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' sub(/ :/,"");{ print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.appex\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Best Video Card for non 3d/compositing work in Premiere CS4?
Hi all, I'm looking to optimize my system where I can to speed up the editing process. I edit 1080p footage from the Canon 5D MKII (h.264 MOV files)using half-res h.264 proxies, but CS4 seems to hang a lot in the timeline view and clips just disappear and instead show green. I'm switching to half-res MPEG-2 (.m2v) proxies now and so far that problem seems to have gone away (still testing), but when timeline display quality is at "High Quality" (vs. automatic) there's still some chop during slow pans (not seen with "Automatic" or "Draft Quality").
Anyway, I'm looking for the weakest point in my system and suspect the video card. My system is an 2.66 i7 processor, 6GB 1333 ram, 1x160GB sata II HD (OS/Apps), 3x1TB SATA II RAID 0 (paging file, data), and an $80 ATI 4650 512 MB video card running Vista 64.
So all that said, what's the best general graphics card for editing HD video in Premiere CS4? I don't care about 3d or compositing at this stage, just basic editing of unrendered (timeline playback) HD video, maybe sometimes 1-3 HD layers, some basic color correction effects (b+w, contrast, etc), dissolves, text overlay, some clip speed manipulation.
Many seem to recommend the Nvidia quadro cards, but I haven't found any information to suggest they help with anything other than 3D/compositing, which I don't need (and therefore don't need to pay the premium).
There's also the Nvidia CX card, but it's main feature is touted as encoding h.264, whereas I could care less about that and ideally need decoding of h.264 in the timeline to be better. I haven't seen any great reviews on this card of heard of average user testimonials, probably because it's $2k and it mainly marketed as "zoom more fluidly in photoshop, export h.264 4x faster", which seem like minor issues vs. "better realtime playback of HD video".
I sort of rambled, but if any informed CS4 users can help answer the question regarding the best video card for general CS4 editing use (not 3d/compositing stuff) I'd love to get more insight.So in Media Encoder CS4, I tried encoding one of the clips that plays back the least smooth in the Premiere timeline (a slow pan across intricate patterns on a sand dune in death valley) to the following:
Format: P2 Movie, Preset: DVCPRO HD 720P 30
(this was the only format in media encoder that mentions DVCPRO HD)
I noticed when trying to customize the setting, that there is no 30 fps option, just 23.976, 29.97, and 59.94. I just went with 29.97 as that was the closest to the 30 fps of the source MK II footage. The width and height were also unajustable at 960x720 for the DVCPRO HD format.
Playing the output in the timeline view of Premiere was comparable in smoothness to the m2v file. I looked at my resource monitor during playback looking for bottlenecks, and the CPU does seem to spike at 100% initially when playing this clip back. I reverted to the m2v version and also saw the same CPU spike. I also reverted back to the down-res'd mp4 version, same spike. Moving display quality down to draft does allow for smooth playback here.
So I guess there's something about this clip that is CPU intensive to play back in the timeline in any of these formats. The original 1080p version plays back perfectly in both quicktime and VLC player.
Anyway, for now I think I'm content with using the m2v proxies as a big chunk of the clips are fairly smooth, and using a reduced quality display mode for clips that don't play as smoothly is accpeptable for now. At least so far I'm not seeing the hanging/video not displaying (and instead showing a green screen) that I was with the mp4 proxies.
If anyone has any other suggestions as to how to get smoother timeline playback for these proxies (or the original h.264 .MOV files), however, whether it be a hardware upgrade (e.g. better video card) or a different proxy codec, I'd love to hear them and give it a shot.
Maybe you are looking for
-
Pb install Oracle 9.0.2 on HP UX 11.00
I am trying to install oracle9i (9.0.2) on an HPUX 11.0 Box (64 bit). I have completed the pre_installation without error. However I am unable to execute the runInstaller command. $ /var/disk/Disk1/runInstaller /var/disk/Disk1/runInstaller: ./runInst
-
Hi Experts, Please clarify whether delivery schedule lines if creatd manaully in ME38 will get affected/changed by MRP run. Edited by: Shravan A on Apr 15, 2008 7:04 PM
-
Poll the new or changed records use DB Adapter in OSB Cluster
Hi! I have an OSB Cluster which is included two servers: osbServer1 & osbServer2. I need to poll a view V_TMS_GOODS, and I use the "SequencingPollingStrategy" to implement it. The following is my JCA config: <adapter-config name="getGoodsInfoFromERP"
-
Status changes - cant go into support messages
I was busy with setting up user statusses and was testing. So I changed a few messages. but now when I try to open a message again I get the following message "Document is being distributed - changes are not possible" I cant now change back the statu
-
Hi everyone, I've got the next question: when I create a condition on a table in ODI and want to use a user defined procedure/function created in the database I have to use a qualifier (schemaname) in front of the procedure/function (E.g. TEST.ISDATE