No availability monitor defined in RZ20 error

Hi All,
I have configured NWA with the ABC system ( CEN system) with the monitored system XYZ. I am able to see all the reports, logs etc from ABC for XYX system through login to http://ABC-host:port/nwa.
But while going to monitoring -> availability i am getting the below error:
"No availability monitor defined in RZ20; check version of central monitoring system"
Please tell me where i am worng here.
Thanks,
Rohan

Hi Chandra,
Both of the agent is running fine and i am able to test successfully in ABC (CEN) system) under RZ21.
But the problem is occuring in only NWA.
Thanks,
Rohan

Similar Messages

Availability monitoring using CCMSPING..

Hai,
Iam facing problem in Availability monitoring using CCMSPING. CCMSPING is installed on CEN system which is a SOLUTION MANAGER system with SAP_BASIS - Release 702 and Level - 0002. (SAP EHP 1 for SAP NetWeaver 7.0)
We have 4 Production systems in the landscape out of which 2 systems are not reporting the data in RZ20 in CEN under 'Availability Monitoring' MTE. I got the below error when I tried to Test ping the connection for the faulty servers in RZ21 in CEN.
Error:
CCMSPING communication error: Cannot access message server
Also I got the below pasted errors from dev_ccmsping from the CCMSPING working directory.
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 7
    (SI_ECONN_REFUSE/111; I4; ST; 1x.1xx.1x.xx:3600) [nixxi.cpp    2823]
ERROR => MsIAttachEx: NiBufConnect to /H/xxxxx.xxxxxxx.xxx.xxxx.COM/S/sapmsxxx/sapmsxxx failed (rc=NIECONN_REFUSED) [msxxi_mt.c   652]
ERROR => LgIAttach: MsAttach (rc=NIECONN_REFUSED) [lgxx_mt.c    3980]
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 7
    (SI_ECONN_REFUSE/111; I4; ST; 1x.1xx.1x.xx:3600) [nixxi.cpp    2823]
ERROR => MsIAttachEx: NiBufConnect to /H/xxxxx.xxxxxxx.xxx.xxxx.COM/S/sapmsxxx/sapmsxxx failed (rc=NIECONN_REFUSED) [msxxi_mt.c   652]
ERROR => LgIAttach: MsAttach (rc=NIECONN_REFUSED) [lgxx_mt.c    3980]
ERROR => Error response: 404 - expected: 200 [csmhttp_mt.c 465]
I have checked the /etc/services files as well but no luck. Please help me with suggestions.
Thanks in advance.
Regards,
Yoganand.V
System details:
Kernel release: 701
Operating System: Linux 2.6
OP release: 2.6.5-7.282-smp
Database system: ORACLE
Release: 10.2.0.4.0
Machine type: x86_64

Hai Dirk,
I have checked all the ways possible, we have sapms<SID> in the IP service name filed.
Tried with 36<Instance number>, aslo tried with IP address in the host name filed but no luck.
We have 4 PRD systems out of which 2 works and the other 2 is not working. The working systems are 640 systems and the other two systems which is not working are 620 systems.
I have tried updating CCMSPING to the latest patch level as well.
The services file in the CEN system is maintained with correct values.
We have SAPROUTER running in our CEN system, and the entries can be found in my previous post.
We are not using the router to connect because the systems which are working do not have any router string attached to them.
Please let me know if you find any reason for the problem.
Thanks in advance.
Regards,
Yoganand.V

Availability monitoring using ccmsping - refresh rate

So I've configured my solman 3.2 to monitor the availability of other systems via the use of ccmsping. I can see the other systems well enough, but the problem is the long time it takes for my solman system to become aware that a monitored system is no longer active.
It can easily take 20 minutes for it to report that a system is unavailable. When I say "report", I mean that the status is updated in the 'Availability and Performance Overview' monitor in RZ20.
Even then, the only evidence visible is that the 'Availability' alert changes colour due to the % availability over the last 15 minutes. The other alerts for Groups and Instances simply turn white because no information is coming from the child system.
SAP help and the document "Availability Monitoring with CCMSPING.pdf" advice that monitoring frequency can be changed by changing the parameter values for the CCMS_AVAIL_LOGON_CHECK method. I have changed these values, which have had no apparent impact on the response times for noticing that a system has become unavailable.
Any suggestions?

Hai Dirk,
I have checked all the ways possible, we have sapms<SID> in the IP service name filed.
Tried with 36<Instance number>, aslo tried with IP address in the host name filed but no luck.
We have 4 PRD systems out of which 2 works and the other 2 is not working. The working systems are 640 systems and the other two systems which is not working are 620 systems.
I have tried updating CCMSPING to the latest patch level as well.
The services file in the CEN system is maintained with correct values.
We have SAPROUTER running in our CEN system, and the entries can be found in my previous post.
We are not using the router to connect because the systems which are working do not have any router string attached to them.
Please let me know if you find any reason for the problem.
Thanks in advance.
Regards,
Yoganand.V

OEM12c :: Agent has stopped monitoring. The following errors are reported : DISK_FULL

Hello sir,
I am new to EM12c Cloud Control.
Problem is that EM shows "Agent Unreachable" as status for an agent.
and also shows following error ::Agent has stopped monitoring. The following errors are reported : DISK_FULL.
Agent status is as follows:
E:\Agent_Grid\agent_inst\bin>emctl status agent
Oracle Enterprise Manager Cloud Control 12c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
Agent Version     : 12.1.0.3.0
OMS Version       : 12.1.0.3.0
Protocol Version : 12.1.0.1.0
Agent Home        : E:/Agent_Grid/agent_inst
Agent Binaries    : e:/Agent_Grid\core\12.1.0.3.0
Agent Process ID : 7164
Parent Process ID : 5816
Agent URL         :
Repository URL    :
Started at        : 2013-11-20 11:58:25
Started by user   :
Last Reload       : (none)
Last successful upload                       : 2013-11-20 12:02:58
Last attempted upload                        : 2013-11-20 12:02:58
Total Megabytes of XML files uploaded so far : 0.06
Number of XML files pending upload           : 0
Size of XML files pending upload(MB)         : 0
Available disk space on upload filesystem    : 1.15%
Collection Status                            : [COLLECTIONS_HALTED(
UPLOAD SYSTEM Threshold (UploadMaxDiskUsedPct: 98) exceeded with 98.84559)]
Heartbeat Status                             : Ok
Last attempted heartbeat to OMS              : 2013-11-20 12:19:04
Last successful heartbeat to OMS             : 2013-11-20 12:19:04
Next scheduled heartbeat to OMS              : 2013-11-20 12:20:04
Agent is Running and Ready
I also found some help at
Agent has stopped monitoring. The following errors are reported : COLL_DISABLED|DISK_FULL | Sunkupuli DBA
but didn't help me.
Please, help How can Agent start Monitoring again?
Many Thanks in advance

Free disk space or Add disk space - such that the Disk usage is less than 95%
The Agent Collections will be re-enabled (when Disk usage falls below 95%)
Wait for a few minutes; the Agent and Host Targets should now be shown Up in Console.
Symptoms are almost similar to MOS note 1501904.1

NWA Availability monitoring problem

With NW04s at SP8 I have an ABAP+J2EE system that is my Central Admin/Monitoring system. I have setup CCMSPING in central system and also in RZ21 of the ABAP system. I verified the systems are showing in RZ20 with green/100% indications.
When I go to set them up in NWA, I see them listed with yellow warnings next to them in the availability monitoring screen. When I scroll down and click 'enable availability monitoring', I get a message at the top "SYSTEM_ALREADY_MONITORED".
Why might it be telling me that, even though the metrics are not showing up in the NWA?

Hi Dave,
if you don't see the availability of monitored instances in the central reports, then you'll probably don't see it in the transaction RZ20 as well. Is this correct?
If so, did you check the following documentation?
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/9e100dd7980fffe10000009b3810a5/frameset.htm
and another source of information that might help (SAP Tutor, so make sure that the SAP Tutor player is installed on your computer):
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/a-c/availability%20monitoring%20and%20ccmsping.sim
Kind regards
Dirk

Published list of available "Monitored Attributes".

Hi all,
I am trying to create some user defined monitoring alerts. Is there a list of available "Monitored Attributes", such as CpuUsage.usagePercentage, ProcessUsage.*, etc
I have looked through the docs and can't see a list of available attributes.
In the document "Advanced User Guide - E18416" they are mentioned on page 96 and page 99 point 3b mentions "javadoc public API". No idea what that means.
Can anyone shed some light?
Cheers
Neil

Hi all,
Not to self: Install the SUNWxvmoc-sdk package and read the javadocs ;-)
Cheers
Neil

CCMSPING Availability monitoring for Cluster system

Hi!
I would like to know which entry in SOLMAN (tcode RZ21, field Message Server Host Name) for the CCMSPING Availability monitoring of the satellite systemdoes apply?
The satellite system was installed as cluster with 2 nodes.
The problem is that I can see the node in RZ21 (Availability) but no data is shown
I think possible are the following:
first node (ABCD1234)
seconde node (DFRG1234)
ABCDdbpxx (virtual db node)
ABCDcipxx (virtual instzance node)
IP adress of the system
Thank you very much!
regards
Thom

The CCMSPING is used only to configure the logon check. After this there is a data collection method CCMS_AVAIL_LOGON_CHECK responsible to update the status.
The normal configuration the method run in dialog every 5 minutes. Sometimes a solution for this kind of "value is obsolete" is changing to background.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/49/2fb95c65a116b4e10000000a42189d/content.htm
Anyway, you also should check the ccms_selfmonitoring in RZ20.

Missing sapmsg.ini when configuring CCMSPING availability monitoring

Has anyone has any issues configuring Availability Monitoring with CCMSPING under RZ21 ?
Under the option, Technical Infrastrucure -> Availability Monitoring -> Configure CCMSPING Monitoring
Monitoring -> Create System
There is an option to import the SAPMSG.INI file
I have sapgui 7.1 loaded on this desktop
For some reason, the file SAPMSG.INI is not available.
I even tried defining a Group Logon on SAPLogon, SAPMSG is still not available.
Then we tried defining the system manually - all we got was a message, "system not found"
Has anyone tried doing CCMSPING Availability Monitoring on Netweaver 7.0 (Solution Manager 4.0) ?

Hi,
The SAPMSG.ini is created by your SAPGUI. check it in your Windows directory, there should be one if you are connecting to any SAP server using the message server.
Check this link for configuring availability monitoring:
http://help.sap.com/saphelp_47x200/helpdata/en/38/9e100dd7980fffe10000009b3810a5/frameset.htm
Regards,
Siddhesh

I'm trying to update my iphone but it stuck up ..... I tried to recover it but to no avail... it says error 1015..... help pls..

I'm trying to update my iphone but it stuck up ..... I tried to recover it but to no avail... it says error 1015, wht should I do???

Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. Very rarely this error is caused by a hardware issue and requires service.
Resolution
Try these steps first
To perform some of these steps, you need to be logged in to the computer as an administrator. If you are not sure if you have administrator access, contact the owner of the computer or the system administrator.
Note: If necessary, review the steps for restoring your iOS device.
You can resolve most restore errors by following these basic steps:
Collapse All Sections | Expand All Sections
1. Update to the latest version of iTunes
2. Verify that your operating system is up to date
3. Disconnect other USB devices
4. Check security settings
5. Restart your computer
http://support.apple.com/kb/TS1275

JEE MP: Authoring JEE Application Availability Monitor

Hi experts,
We've imported the JEE WebSphere MP's, completed discovery, enabled deep monitoring, and now have some issues authoring custom "JEE Application Availability Monitoring".
In the wizard on the "MBean to Monitor" screen we use the MBean name:
WebSphere:j2eeType=JDBCResource,*, as we'd like to monitor some JDBC Connection Pool stats.
On the next screen in the wizard, "Health State", we select the xPath:
MBeans/MBean[@Name="javax.management.modelmbean.RequiredModelMBean" and @objectName="WebSphere:J2EEServer=server1,Server=server1,cell=APPT75WASCell01,j2eeType=JDBCResource,mbeanIdentifier=cells/APPT75WASCell01/resources.xml#builtin_jdbcprovider,name=Derby
JDBC Provider (XA),node=APPT76WASNode01,platform=dynamicproxy,process=server1,spec=1.0,type=JDBCProvider,version=7.0.0.25"]/Properties/Property[@Name="stats" and @type="com.ibm.ws.pmi.j2ee.JDBCStatsImpl"]
The problem we have is that ALL of the stats and counters are found within this single Property, as seen below:
Current value:
Stats name=Derby JDBC Provider (XA), type=connectionPoolModule
Stats name=jdbc/DefaultEJBTimerDataSource, type=connectionPoolModule
name=CreateCount, ID=1, description=The total number of connections that are created., unit=N/A, type=CountStatistic, count=6
name=CloseCount, ID=2, description=The total number of connections that are closed., unit=N/A, type=CountStatistic, count=5
name=AllocateCount, ID=3, description=The total number of connections that are allocated., unit=N/A, type=CountStatistic, count=2306
name=ReturnCount, ID=4, description=The total number of connections that are returned to the pool., unit=N/A, type=CountStatistic, count=2302
name=PoolSize, ID=5, description=The size of the connection pool., unit=N/A, type=BoundedRangeStatistic, lowWaterMark=0, highWaterMark=2, current=1, integral=8.3568935E7, lowerBound=0, upperBound=30
name=FreePoolSize, ID=6, description=The number of free connections in the pool., unit=N/A, type=BoundedRangeStatistic, lowWaterMark=0, highWaterMark=2, current=1, integral=8.3485336E7, lowerBound=0, upperBound=30
name=WaitingThreadCount, ID=7, description=The average number of threads that are concurrently waiting for a connection., unit=N/A, type=RangeStatistic, lowWaterMark=0, highWaterMark=0, current=0, integral=0.0
name=FaultCount, ID=8, description=The number of connection timeouts in the pool., unit=N/A, type=CountStatistic, count=0
name=PercentUsed, ID=9, description=Average percent of the pool that is in use. The value is based on the total number of configured connections in the ConnectionPool, not the current number of connections., unit=N/A, type=RangeStatistic, lowWaterMark=93,
highWaterMark=100, current=0, integral=278663.0
name=UseTime, ID=12, description=The average time in milliseconds that a connection is used. The difference between the time at which the connection is allocated and returned. This value includes the JBDC operation time., unit=MILLISECOND, type=AverageStatistic,
avg=36.24588031222897, min=0, max=33275, total=83583, count=2306, sumSq=1.499105659E9, type=TimeStatistic, avg=36.24588031222897, min=0, max=33275, total=83583, count=2306, sumSq=1.499105659E9
name=WaitTime, ID=13, description=The average waiting time in milliseconds until a connection is granted., unit=MILLISECOND, type=AverageStatistic, avg=0.0, min=0, max=0, total=0, count=0, sumSq=0.0, type=TimeStatistic, avg=0.0, min=0, max=0, total=0,
count=0, sumSq=0.0
name=PrepStmtCacheDiscardCount, ID=21, description=The number of statements that are discarded because the cache is full., unit=N/A, type=CountStatistic, count=3
name=JDBCTime, ID=22, description=The average time in milliseconds that is spent running the JDBC calls, including the time spent in the JDBC driver, network, and database. (Applies to V5.0 data source only.), unit=MILLISECOND, type=AverageStatistic,
avg=0.66030797517812, min=0, max=687, total=2873, count=4351, sumSq=994891.0, type=TimeStatistic, avg=0.66030797517812, min=0, max=687, total=2873, count=4351, sumSq=994891.0
So then how do we configure Expressions for Health State at this point in the Wizard, if we have such a long string value containing ALL of the stats? Anyone have insight into this?
Thanks!

Hi experts,
We've imported the JEE WebSphere MP's, completed discovery, enabled deep monitoring, and now have some issues authoring custom "JEE Application Availability Monitoring".
In the wizard on the "MBean to Monitor" screen we use the MBean name:
WebSphere:j2eeType=JDBCResource,*, as we'd like to monitor some JDBC Connection Pool stats.
On the next screen in the wizard, "Health State", we select the xPath:
MBeans/MBean[@Name="javax.management.modelmbean.RequiredModelMBean" and @objectName="WebSphere:J2EEServer=server1,Server=server1,cell=APPT75WASCell01,j2eeType=JDBCResource,mbeanIdentifier=cells/APPT75WASCell01/resources.xml#builtin_jdbcprovider,name=Derby
JDBC Provider (XA),node=APPT76WASNode01,platform=dynamicproxy,process=server1,spec=1.0,type=JDBCProvider,version=7.0.0.25"]/Properties/Property[@Name="stats" and @type="com.ibm.ws.pmi.j2ee.JDBCStatsImpl"]
The problem we have is that ALL of the stats and counters are found within this single Property, as seen below:
Current value:
Stats name=Derby JDBC Provider (XA), type=connectionPoolModule
Stats name=jdbc/DefaultEJBTimerDataSource, type=connectionPoolModule
name=CreateCount, ID=1, description=The total number of connections that are created., unit=N/A, type=CountStatistic, count=6
name=CloseCount, ID=2, description=The total number of connections that are closed., unit=N/A, type=CountStatistic, count=5
name=AllocateCount, ID=3, description=The total number of connections that are allocated., unit=N/A, type=CountStatistic, count=2306
name=ReturnCount, ID=4, description=The total number of connections that are returned to the pool., unit=N/A, type=CountStatistic, count=2302
name=PoolSize, ID=5, description=The size of the connection pool., unit=N/A, type=BoundedRangeStatistic, lowWaterMark=0, highWaterMark=2, current=1, integral=8.3568935E7, lowerBound=0, upperBound=30
name=FreePoolSize, ID=6, description=The number of free connections in the pool., unit=N/A, type=BoundedRangeStatistic, lowWaterMark=0, highWaterMark=2, current=1, integral=8.3485336E7, lowerBound=0, upperBound=30
name=WaitingThreadCount, ID=7, description=The average number of threads that are concurrently waiting for a connection., unit=N/A, type=RangeStatistic, lowWaterMark=0, highWaterMark=0, current=0, integral=0.0
name=FaultCount, ID=8, description=The number of connection timeouts in the pool., unit=N/A, type=CountStatistic, count=0
name=PercentUsed, ID=9, description=Average percent of the pool that is in use. The value is based on the total number of configured connections in the ConnectionPool, not the current number of connections., unit=N/A, type=RangeStatistic, lowWaterMark=93,
highWaterMark=100, current=0, integral=278663.0
name=UseTime, ID=12, description=The average time in milliseconds that a connection is used. The difference between the time at which the connection is allocated and returned. This value includes the JBDC operation time., unit=MILLISECOND, type=AverageStatistic,
avg=36.24588031222897, min=0, max=33275, total=83583, count=2306, sumSq=1.499105659E9, type=TimeStatistic, avg=36.24588031222897, min=0, max=33275, total=83583, count=2306, sumSq=1.499105659E9
name=WaitTime, ID=13, description=The average waiting time in milliseconds until a connection is granted., unit=MILLISECOND, type=AverageStatistic, avg=0.0, min=0, max=0, total=0, count=0, sumSq=0.0, type=TimeStatistic, avg=0.0, min=0, max=0, total=0,
count=0, sumSq=0.0
name=PrepStmtCacheDiscardCount, ID=21, description=The number of statements that are discarded because the cache is full., unit=N/A, type=CountStatistic, count=3
name=JDBCTime, ID=22, description=The average time in milliseconds that is spent running the JDBC calls, including the time spent in the JDBC driver, network, and database. (Applies to V5.0 data source only.), unit=MILLISECOND, type=AverageStatistic,
avg=0.66030797517812, min=0, max=687, total=2873, count=4351, sumSq=994891.0, type=TimeStatistic, avg=0.66030797517812, min=0, max=687, total=2873, count=4351, sumSq=994891.0
So then how do we configure Expressions for Health State at this point in the Wizard, if we have such a long string value containing ALL of the stats? Anyone have insight into this?
Thanks!
I'm using the latest JEE MPs and SCOM 2012 R2, however I don't show the stats as a property on this MBean.

No Exception Defined for System Errors

hi,
I am capturing system messages through an Exception error handler in the block step of Integration Processes.
Its a IDOC -> XI -> HTTP Receiver scenario.
When i execute the scenario, i see an error in the workflow in the Block Step. It shows an Error which says "No Exception Defined for System Errors", though i have a Exception Branch in the Block step.
Any clues why i am not able to capture the Exception errors and send it through email.
Its failing at the Block step.
More details on the scenario:
1. Start
2. Receive Step - Asynch - IDOC
3. Block Step - with Exception name as "TimeOut"
3.1 Exception Branch with exception handler as "Timeout"
3.1.1 - Transform Step - to transform a Exception message(with just one field) to "Error" message (with 5 fields)
3.1.2 - Send Step - send the "Error" message through email
3.2 Deadline branch set to 1 minute
3.3 Switch step
3.3.1 Transformation step - to transform the IDOC to XML
3.3.2 Send step - Synch - request xml and response xml defined in this step
4. Switch Step
4.1 - Transform step - transforms the idoc and xml response to the actual error
4.2 - Send Step - sends the actual error to the email message using MAIL adapter.
Any tips would be grateful.
Thanks,
Tirumal

Stefan -
In step 3.3.2
I did find the property exceptions and assigned the exception branch in the block and ran the scenario, now i get an error saying that : "Exception Timeout Occurred."
I went through the Technical Details of the workflow and the error displayed there is "Exception 'Timeout' caught and transferred to the exception handler'.
In step 3.1.1
I get an error saying "No Payload found'.
Does this mean its not able to capture the message text.
Thanks in advance,
Tirumal

"Non Defined IMS Exception" error while login on Presence Server

Hi,
I am getting "Non Defined IMS Exception" error while login on Presnce Server. I have configured Publisher Presence server on VMware already and now configuring another presence server in other office for backup purpose. I have copied same VM image and installed in another office which are connected by MPLS. I am able to login on server by admin login (OS administration) but not for administration login.
Please help.
Regards,
Kalshetty

Hi Kalshetty,
Please check the following link for this error, it applies to CUPS 8.x
https://supportforums.cisco.com/document/109296/error-non-defined-ims-exception-cups-8x
HTH
Manish

In my Component monitoring i got this error for Adapter engine status.

In my Component monitoring i got this error for Adapter engine status. Status is in red..
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.03.server3, string], target element type: SAP_BusinessSystem)
Please clarify ASAP..
Thanks..

HI,
See below links you will get ..
Process Integration (PI) & SOA Middleware
ERR:Could not find SLD name for XI Application "DIRECTORY"
Unable to find an associated SLD element
Regards
Chilla..

Regarding Availability Monitoring.

Hi All,
We are using SOLMAN 7 for availability monitoring of our system landscape.
We have installed CCMSPING agents in all the servers and all are running fine.
For our BI system we are not getting the availability data for the different instances. In RZ21 availability monitoring we are able to see only the Central instance of the our BI system and not any of the other app. instance.
We checked the CCMSPING agent of all application servers in BI system and they are up and running and all RFC related to CCMSPING in SOLMAN are working fine but still no data.
We also checked the /etc/host file of SOLMAN and message server for BI is mentioned there.
How can we involve the application instances in SOLMAN for BI please help on this.
Regards,
Arun Pathak

Hi,
Check this Link for the Performance monitoring-
http://help.sap.com/saphelp_nw2004s/helpdata/en/9e/6921e784677d4591053564a8b95e7d/content.htm
<i>g)system alarm trigger a page, FAX, email, etc..?</i>
>>>Is available.
http://help.sap.com/saphelp_nw2004s/helpdata/en/4e/20934259a5cb6ae10000000a155106/content.htm
Regards,
moorthy

Availability Monitoring from Solman

Dear community,
we are using availability monitoring with CCMSPing from our Solution Manager as central monitoring system. We tried to configure a central autoreaction method that send automatically emails if a syste is down. That works for all other configured MTE-classes but not for the availability classes.
What could be the issue with that?

Hello Christoph,
> availability monitoring with CCMSPing from our Solution Manager as central monitoring system.
> We tried to configure a central autoreaction method
the information regarding the availability is stored locally in your central monitoring system therefore a central autoreaction will not work here (because there is no agent that will trigger this).
As a consequence you have to configure an additional autoreaction that is started in dialog. Please note that the local autoreaction will be started in client 000 so you need also to configure SAPconnect in this client.
Regards, Michael

No availability monitor defined in RZ20 error

Similar Messages

Maybe you are looking for