No available selection for stack target at maintenance optimizer

Hi all,
I have an issue. You can see from the screen shoot. I can not select target stack. What should i do at this moment? I want to configure for an ERP test system.
Thanks and best regards.

Hello,
This type of issue is a consequence of an error that went on before. The errors are usually caused by LMDB definition.
In order to determine what has gone wrong, please check the log tab. Also, the product version that you chose in Maintenance Optimizer and the LMDB definition are interesting information .
If system information privacy is a concern, you can open a support message for component SV-SMG-MAI.
Best regards,
Miguel Ariño

Similar Messages

Where can I get a list of available selection for certain dict type?

Where can I get a list of available selection for certain dict type in code? For instance, when I use SE16 to view VBFA table, I am presented with many filter criteria. One of them would be "VBTYP_N". When I click on the square next to the option, I am presented with a list of possible values to select from. Where can I get the list of this possible values for any given dict type in code?

Hi Frank,
The list of possible selection you see can be from diferent sources
1) Search helps defined either programatically or search helps defined at table level.
If it is a Z Selection screen check the program, then the data declaration of the parameter
2)Check tables provided at field level. They can be through use of foreign keys. The proposal generated could be simple compund ..
3) Fixed values at Domain level ()
Please refer to this link as well for detailed explanation
[http://help.sap.com/saphelp_470/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm]

Stack File for JSPM when using Maintenance Optimizer

Hello,
As you know JSPM looks for a stack file when applying a support pack stack. When using maintanance optimizer I see no way to get a stack file. I end up having to do the work twice: once to get the files in maintenance optimizer, and again I have to go to marketplace swdc to choose the files and create the list of downloads again only to save a stack file.
Am I missing something? Is this double work really necessary?

Hello John,
It seems that you are doing double work.
If you use the download type as "SLM" then you have a chance to transfer the XML to SLM. Else if you choose the download type as "Download Manager" then the XML should be created in the EPS/in folder of the Solution Manager system.
You also need to check whether you have applied all the applicable notes for the Solution Manager stack from the note 1122966 and that the BC sets for MOPZ are activated correctly.
Finally check the permissions on the EPS/in folder of Solution Manager to check whether there is a issue with authorizations.
A SLG1 log ( filtered by the username who creates the MOPZ transaction and time at which the transaction was created ) will reveal the errors in the process.
Regards
Amit

"Available In" for extended attribute configuration.

What config do we need to turn on to allow "printed packaging" to be an available selection for the "Available In" pick list of the an extended attribute in edit mode? We do have printed packaging specs turned on.
thanks,
David

Thanks, "SR 3-7567655531 : Printed Packaging Tag is not available in the "available in" pick list when creating a new EA" was submitted.

Field selection for Service Master

Hi
is it possible to differentiate the field settings based on the service category, i want to make few fields optional.
Thanks
Ankit

Hello Ankit ,
Please go into Transaction SPRO -> SAP Reference IMG -> Materials Management -> External Services Management ->
Service Master -> Field Display for Service Master -> Define Field Selection for Service Master ( Individual Maintenance ).
Click on the "Influencing" button. This is where you should be able to make the changes to each field for all of your Service Categories.
I hope this information has been helpful.
Best Regards,
Frank

Maintenance Optimizer in SAP Solution Manager

what is Maintenance Optimizer in SAP Solution Manager and what are its benefits

Hi
even this may be useful
Ensure your Solution manager system is at the most recent Support Package Level, specifically ST 400 Patch 11, to reduce note application time
Download from oss most recent step-by-step setup guide
Oss note 1024932
Oss Note 1008717 ( N/A )
Relevant up to SP11 for Basis 700
OSS Note 950975 support for IE7 ( N/A we are using GUI)
Oss note 975510 corrections for snote ( Via OSS not snote )
Oss note 1004691 corrections for snote *** Corrections for 975510 ( UP TO SAP_BASIS 11 ) N/A
Common problem notes, but not critical for Maint Opt
0998987: Maintenance Optimizer: Empty error messages
1022072: Maintenance Optimizer: "No Data Available" message o See note 1025381 before applying 1022072.
1020789: Maintenance Optimizer: Allow all systems to be selected
1020802: Maintenance Optimizer List displays incomplete data
1024105: Maintenance Optimizer: two "Cancel" buttons
1025381: Maintenance Optimizer: Link to additional download files
1029453: Maintenance Optimizer - Wrong status displayed
1030405: Maintenance Optimizer: Browser opens in background
1030498: Maintenance Optimizer - IBase is not active
1032463: Maintenance Optimizer: Internet Explorer Script Error
1042704: Maintenance Optimizer: Display only employee partners
Partner Scenario SOLMAN4.0 Only
Os note 1021275 ( RFC Destinations ) N/A ST 400 11
Oss Note: 997780 ( N/A we are at 11 use note 939897 for ST400 SP11 Application )
Relevant for ST400 SP09 ( N/A ST 400 11 )
User:
To setup you must have SAP_ALL
General Users: ( Oss note 1032322 )
Must be assigned to role SAP_MAINT_OPT_ADMIN
Auth Object: D_SOL_VSBL ( visibility of solutions)
Auth Object: CRM_ORD_PR ( for CRM stuff )
/spro
As of Support Package level ST 400 SP10:
Call Transaction SPRO -> SAP Reference IMG ->SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> Change Management -> Set Up Maintenance Optimizer
This IMG activity refers to the SAP Note 990534: Solution Manager Maintenance Optimizer: BC Set. Follow the instructions in this SAP Note
N/A as of ST400 SP11
Define a Solution:
Solution_Manager Select Solution Overview New.
Enter Descriptive Name ( Ex. GTS Landscape )
Hit Continue
Select Solution Landscape Maintenance
Select System Groups & Logical Components on the Left hand Side
Select Solution Landscapes and pick the one you created
Define the solutions for that landscape
Highlight each item and click Logical Component (You must have a valid license to set this up)
Assign S-User
Transaction: AISUSER
Enter you user id and your SUSER ID for downloading
Create another SAPOSS Connection called SAP-OSS with S-User assigned
Call SOLUTION_MANAGER
Select Solution Overview
Select the solution you want to work with
Select Change Management Support Package Stacks
Click Maintenance Optimizer around middle of screen
Select the solution you want to get Sps for
Go to OSS and add the files to download basket
When done return to screen and hit continue
Select - Confirm files in Download Basket
Error message comes if your sap user and your oss user are not setup in AISUSER screen
Now go to SAP Download Manager ( On your local pc ) and download the files you just confirmed of course using the same S-User id you just added them to the basket with
Apply support packages via spam per normal process
Return to the SOLUTION_MANAGER window select the landscape you are working on
Hit Maintenance Optimizer List
Choose the maintenance transaction you are working on
You will see a list of the confirmed and downloaded sps you selected
Once you apply these to the system using SPAM you will change the status of implementation to Completed and Hit Save
This completes this activity
If you wish to do more work you will have to create a new transaction.
[Edit section] Add A New Instance to Maintenance Optimizer
Sign into Solution Manager
Ensure new instance has valid license installed and logical clients assigned
Select Landscape Components
Right Click Systems
     Select Create new system with assistant
Enter
SID / Description / Product Type / Installation Number ( Get this from SLICENSE in system you are setting up )
Next enter Sys # & MEssgae Server and hit continue
Next select Generate RFC Destinations & Assign Logical Components & Enter Client #
I always get a problem saving since SLD is not setup ignore and continue
Highlight the system you just added under Systems SAP Global Trade Services
Select Assignment to Logical Components
Now add additional software such as Net weaver ABAP & JAVA if your primary setup was of another type ( ex. GTS )
Highlight the system you wish to update under Systems and hit change
     Select Header Data
     Click Installed Product Versions
     In the product box add whatever you require for this system
     Select the version from the 2nd box and hit copy
Ex.
If you cannot setup the trusted system here is a workaround:
Create User in Target for Trusted System RFC from SM1
     User:      <Username>
     Pass:   <Pass>
     Type: Communication
Use this when setting up the trusted connection, remove the trust and use this CPIC user info for the RFC.
Generate RFCs and ensure SMSY setup is done for SID in Solution manager
Now Create a New Solution For your instance:
Go to SOLUTION_MANAGER transaction
     Select NEW
     Give Descriptive name: ex. GTS Landscape
Under Solution Landscape
     Select Solution Landscape Maintenance
     Select System Groups and Logical Components Tab
          Open Solution Landscapes
               Select the one you just defined (GTS Landscape)
SOLTION_MANAGER
Select Change Management Support Package Stacks
Select Maintenance Optimizer
Select the Product Version
     GTS 7.1
Select the System Type SID
From here you will be prompted to go to service marketplace and add the items you wish to install. You can do this beforehand as well, be sure to use the same Suser you setup in AISUSER with your sap login
It will ask you to confirm the basket, once you do that you install them normally.
Download with sap download manager, ftp and apply

Only 1 Instance show up on Maintenance Optimizer Transaction

Dear all,
I got another issue relate to Maintenance Optimizer transaction under dswc, I have 2 satellite systems under 1 logical component.
On the first step of MO transaction , I select Product Version SAP ECC 6.0, there is only 1 system appear, in fact in my logical component there are 2 systems ( in SP Stack screen both systems appear normally)
Anyone know the cause, or there is any further set to be done ? Thanks...
Edited by: sketcher on Jun 3, 2009 3:02 PM
Edited by: sketcher on Jun 3, 2009 5:21 PM

Hi Sketcher,
In MOpz, you are selecting the product version ECC 6.0
check once if both those remote systems are difined as ECC 6.0 in SMSY or any other product version ? Second system might be defined of type ERP
and, are you able to see all the systems as 'green' in SMSY -> Solution landscape -> select that particular solution and see if the systems assigned are green or not. Also, by selecting the particular system in the same screen, once check include/exclude button and check consistency then.
and, Are you able to see EWA service sessions for both of those systems in that particular solution view ?
Try to go through these Notes
Note 1020789 - Maintenance Optimizer: Allow all systems to be selected
and if the problem is related to the product version, then you should change the product version to the type of ERP instead of ECC 6, I forgot the exact note number for this, but you can try the below one for this
Note 1022072 - Maintenance Optimizer: "No Data Available" message

System not available for selection in Maintenance Optimizer

Hello,
When planning the maintenance in MOPZ I choose product version and the system displays a list of systems assigned to the Product Version. However, the list only shows one of the two systems assigned to the logical component (prod system). I have looked at the logical component in SMSY listed under SAP ERP -> SAP ECC Server -> Z_SAP ERP and both systems are listed and are "green". A Consistency Check of the logical component shows no errors.
Any ideas are helpful, thank you.

Hello,
There is no 'display filter' on the screen you are referring to, Change Management -> Maintenance Optimizer -> Create New Maintenance Transaction. This is the initial screen of the maintenance transaction where it shows the 5 steps of the maintenance transaction. The following selectable fields are available:
Priority
Short Text
Product version
When I make a selection for the product version an additional selectable table is available where I can select the systems. I should be able to see all the systems assigned to the logical component, however I only see one of the two systems.
I have checked two other Solution Manager systems and there is no 'display filter' or 'hide filter' button either.
Regards,
Robert

There are no stack configurations available in the Maintenance Optimizer

Hello,
I am trying to install Enhancement Pack 1 (EhP 1) on our DEV system, using SAINT in SAP NerWeaver 7.0.
I have downloaded the EHP1 and cpoied them into the "EPS\in" directory.
When I press the u201CStack Configurationu201D button, I get a pop-up that says, "There are no stack configurations available in the Maintenance Optimizer".
Does it require any files like .XML to load the files? Please let me know your suggestions.
Thanks,
Niranjan.

what happened to us was we did not download the upgrade programs for EHP1. Make sure you download both SPs in note 1169247. The first one has the SPs and upgrades SPs for Solman 7.0 to EHP1. The second download for the SPs for EHP1).
Also, we did it manually without the using the button 'stack configuration. Hope this help.
(Supp Packs and Upgrade SPs for Solman 7.0 to EHP1)
SAP Solution Manager 7.0 -> Support Package Stacks.
Target stack : SAP Solution Manager 7.0 EHP1-20 (07/2009)
Source stack : <your SAP Solution Manager 7.0 system stack>
(Support packs for EHP1)
SAP Solution Manager 7.0 EHP1 -> Support Package Stacks
Target stack : 20 (03/2009)
Source stack : 18 (11/2008)

Field Selection for Maintenance Planing

Hi Dear,
I have done some field selection somewhere in SAP System.Now when I am creating Maintenance Item,Maintenance Plan,now I am getting Function Location field as Required.
I don't remember where is the field selection for making the field Function location mandatory.
Please suggest.I am also looking into it.
Thanks and Regards,
VJ

Hi Narasimhan,
I got the field where the changes need to be done.In Notification reference screen I had set the Function Location as a mandatory field.
Problem solved by me it self.
Thanks for your Effort.
Thanks and regards,
VJ

Error in Maintenance Optimizer in step "Select files for component "

Hi everybody,
i would like to download patches for my system. I have defined a solution and now i will start the Maintenance Optimizer procedure to download, but when i press a button "Select Files..." an error "the page cannot be displayed" occurred.
Does anybody know what should i check in my configuration? Where can I find more details for error?
Regards
Bogdan

Hi,
Here is the whole solution for you.
Hope you have implemented the note 990534 properly.
This is what I have done to resolve the same issue -
Apply patch ST-ICO 8 and 9
generate BC set SOLMAN40_MOPZ_TTYP_SLMO_000
generate BC set SOLMAN40_CHARM_PROXYFACT_001
If the error still persist, you will need to work on the below notes. (997780)
Goto SPRO - IMG>SAP SOL MGR>SCENARIO SPECIFIC>CHANGE REQ MGMNT>EXTNDED CONFIG>CHANGE TXN>CONSISTENCY CHECK IN CHANGE REQ MGMNT (define basic settings SOCM_CHECK_002)
Deselect the 'Integr' field (integration with change management is required) for the checks listed below. The system issues a message stating that changes are not allowed and that the entries are SAP property. This is only a warning message. Choose ENTER to ignore the message and save your changes.
Checks:
           IB_SYST_CHK
           S_USER_CHECK
           REQUEST_IN_PROCESS
           SOLUTION_ASSIGNMENT
           PRODUCT_ASSIGNMENT
           S_USER_CHECK
           EMPTY_CONTAINER
           SYSTEM_STATUS_OK
If you are getting the error "no active ibase" after this, try to implement 1030498.
Hope this helps. If this corrects your issue, please mark the question as answered and award points.
Thanks,
Mehfil Meherali

Can you add audio tracks as selectable menu items on a dvd? I shot a wedding where the church had its own set up to record audio. I'm trying to make those songs performed by the artists available for viewers of the dvd to select for listening.?

I'm trying to make audio (MP3) tracks available for viewers of this Wedding dvd to select for listening. Is this possible in iDVD?

You will need to create a slide show for each of those songs with a minimum of 1 photo per slideshow and add the song to the slideshow audio bin. Set the audio to Fit to Music.
In your top/main menu add a submenu for the list of songs.
Add a slideshow for each song with the "+" button at the bottom:
Select the link in the menu and rename it for the song used in the slideshow. You can create a slide image for each song with the song name, composer, singer, etc. on the image to be used for the slideshow An image editor or Pages can be used for that and then convert to a jpeg file for use in iDVD.
The song/playlist menu could look like this depending on the theme you choose:
OT

Warning "Source selection for is incompatible for target selection" in RRI

Hi Friends,
I am getting the following warning message while jumping from one query to another(RRI) :
Source selection for is incompatible for target selection
I have also found one SAP Note : Note 1265027 - Incompatible selection for a variable in the target query which states that it is a program error and we have to Import Support Package 04 for SAP NetWeaver BI 7. 01 (SAPKW70104) into your BI system for SAP NW BI 7.0 Enhancement Package 1.
But the problem is we are already in Support Package 04 .After that also we are facing the same problem.
Can anyone please let me know how to fix this issue?Is anyone faced such an issue.
Thanks in advance.
Regards,
Debjani..

check if the correction instruction given in the note is present in your system.

Budget Availability Control for Maintenance Order

Hi,
Can anybody tell me that how to activate Budget Availability Control for Maintenance Order ? For Internal orders, it is already activated but for Maintenance Order (Category 30, type PM01), it is not activated.
Please tell the procedure for activation for the same.
Thanks in advance,
Regards
Satadal

Thanks.
But I have added Budget profile from Plant Maintenance -> Order type settings.
So, I can assign only maintenance related Investment program and positions in my Maintenance Order.
But as availability control is not activated, System is not stopping me to issue Goods against that Order even if there is no Budget.
I need to have that control for Maintenance Order that we should be able to issue material against that order only if there is a budget.
That's why I want to activate this control but don't know how to do it.
Can you tell me how I can do the same - depending on order type or individually?
Thanks and Regards
Satadal

What is best practice for using Maintenance Optimizer to download SPS + EhP

SAP indicates in note 1095233 and many other documents that the best practice is to implement an EhP along with an SP Stack in the same queue. Furthermore, the only way to download the components of an EhP is via Maintenance Optimizer. However, in step 2 (Calculate download files automatically) you must choose either Maintenance (SPS) or Enhancement Package Installation (EhP); there is no way to tell Maintenance Optimizer that you want to download both SPS and EhP.
In developing the process for my team I circumvented the problem by saying to select Maintenance first to get the SPS into the Download Basket and follow that with selecting Enhancement Package Installation to get the EhP into the Download Basket. The plan would be to include all the downloads in the SPAM/SAINT queue with the expectation that SPAM/SAINT will be able to determine what must be included.
I'm wondering now whether that is a legitimate way to approach this and I am hoping others will share their process.
Thanks,
Terry McCann
Monsanto Company
St. Louis, MO

Actually, I don't believe you will get the entire SP Stack for ERP 6, you only get those pieces of the stack that are required for the Technical Usages you select for the EhP. I'm basing that on my observation that you get a different subset of the files making up the stack depending upon your TU selection. Also, note 1095233 specifically states:
If now the corrections included in the enhancement package 3 correspond to ERP 6.0 SP level 11, SAP recommends to update also the parts of your system to SP level 11 which you do not want to update to enhancement package 3 to achieve a consistent correction level in all parts of your application: SAP recommends to update all software components to the correction status corresponding to SAP ERP 6.0 Support Package Stack 11 with the installation of SAP enhancement package 3 for SAP ERP 6.0.
Thanks,
Terry

No available selection for stack target at maintenance optimizer

Similar Messages

Maybe you are looking for