No back printing options

My company uses a Noritsu mini lab for much of our printing and lightroom is great for printing a single picture here and there and for batching printing a whole folder. But since lightroom sends each file to the printer unnamed the back printing just says lightr instead of the filename.
Does any one know a possible solution? I'd really like to keep using it..

If you have some workflow software for your Noritsu that supports hotfolders you could setup your back printing there and export a batch of files to the hotfolder.

Similar Messages

  • My pull down menu above the green "back" button disappeared recenly after I intalled an update. How to I get it back so I can print since right clicking does not give me a print option?

    I used to have a tool bar at the top of the screen that had file, print, help, etc. After I recently installed something ( I can't remember what), the tool bar no longer appears. Help I need it back! I need to print screens and right clicking does not allow for a print option and my print screen button on my computer does not get me anywhere either. Please describe any help in simple terms - I'm just an average computer user! Thanks.

    In Firefox 3.6 and later on Windows you can hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu on a toolbar.
    Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
    Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
    See also [[Menu bar is missing]] and http://kb.mozillazine.org/Toolbar_customization

  • How to set print option for a Billing document using T-code VF02

    Hi All,
    Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
    regards
    Anand.

    Enter the billing documents detail
    Goto Goto> Header>Output.
    Check the status for your output type in this screen.
    If it is green then come back to the VF03 screen.Enter the billing document number.
    Click on Billing document-->Issue output to.
    Press (CtrlShiftF1) or click on the icon beside "Print options".
    Here you can see the print preview.
    If the status is red then click on the processing log.Here you will get the error messages.
    If the status is in yellow colour,then click on the "Further Data" button
    Set "Dispatch time" as "4 Send immediately (when saving the application)"
    Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
    Enter the billing document no
    Go to Menu option -> Go to -> Header -> Output
    In that screen you have to add relevant output type. (Standard output type is RD00)
    Add that & press enter key
    Highlight that line & press "Further Data" button
    Set "Dispatch time" as "4 Send immediately (when saving the application)"
    Press "Back" Button
    again select that line & go to "Communication method" button
    Set "Logical destination" as LOCAL"
    Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
    Press "Back" Button
    Save
    Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
    You can see that output type line appear.
    select that line & press "Print Preview" button or (CTRLSHIFTF1)
    You can see the print preview.
    Alternatively you can use VF31 to print multiple print outs at same time.
    If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
    Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
    Then normal way, print the billing from SAP.
    It'll automatically send to your PDF writer. You can save it to the path you want,

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • Petition to bring back "Print PDF" to InDesign

    Would anyone else like to join a petition for bringing back "Print PDF" as an option in the InDesign Print menu?
    I am on CS4 and my colleagues are on CS5 and they have no end of problems getting their PDFs the way they want them from the command near the Export options under FILE.
    We work at a printers and in the end my colleagues come to me with CS4 to get the print ready files through to our RIP for making plates for litho printing.
    The vital parts that are missing for CS5 is the option to choose the sheet size of the PDF and much more precise management of the colours and DPI/LPI.
    We can't afford the latest kit for everything or to upgrade everything just because InDesign CS5 has lost a bit of functionality. I don't know what I'll do when it comes to my turn to upgrade and I know that there will be consequences for how we get our InDesign files through for printing. One big headache.
    Why oh why oh why did Adobe decide to take this extra functionality away?

    On behalf of Adobe:
    I assume you are referring to InDesign running on under MacOS.
    (1)     Adobe never “took away” any ability to produce PDF via distillation of PostScript. In what was described by Apple as a security enhancement, Apple themselves disabled the ability of Adobe Acrobat to have an automated “print to Distiller” capability via the Adobe PDF PostScript printer driver instance on the Macintosh (this feature remains available under Windows). If you are going to complain to anyone, complain to Apple. This has nothing to do with a particular version of either InDesign or the Creative Suite, but rather, MacOS version.
    (2)     You still can conceivably produce PDF via distillation of PostScript by producing a PostScript file and then either manually distilling it or using the “watched folder” capability to automate the process of distilling PostScript into PDF.
    A “petition” isn't going to change anything in this regards.
    However, even though production of PDF via distillation of PostScript is still available, albeit not quite as convenient, we would wonder why you believe that you need to produce PDF in that manner?
    PostScript generated by InDesign is not optimized for creation of PDF, but rather for printing directly to a PostScript device. It is highly device dependent with no support of color management and live transparency. It is created for a specific page size, a specific device resolution, and a specific color space. The fonts are embedded in the PostScript file in a manner that is not conducive for high reliability PDF creation.
    Adobe most strongly recommends that all PDF creation from InDesign be performed by the Export function in which PDF is directly generated from the InDesign document without any PostScript intermediary. This provides the ability to produce highly optimized, device independent PDF with full color management, live transparency, searchability, etc.
    You state that the vital parts that are missing for CS5 is the option to choose the sheet size of the PDF and much more precise management of the colours and DPI/LPI. Sorry, but that doesn't make sense at all.
    Regardless of the “page size” chosen for your InDesign document, you can effectively choose a different (larger, but not smaller, obviously) page size for the exported PDF by judicious use of the bleed and slug areas either as defined originally for the document or as overrides at PDF export.
    In terms of color management, PDF export fully supports ICC color management and by selecting appropriate export joboptions (such as PDF/X-4), you can fully manage all colors (RGB, CMYK, LAB, and spot colors) through the rest of your workflow.
    I am not quite sure what you mean by precise management of DPI/LPI, but neither for composite PostScript (which is what you would distill to get a composite color PDF file) nor for PDF export does InDesign support direct specification of screening parameters (what I assume you mean for DPI/LPI). If you print separations directly from InDesign to a PostScript device, yes, the InDesign Output Print dialog allows you to specify generic (not on an image by image basis) frequency and angle for each of the separations which results as setpagedevice parameters in the PostScript file (and subsequently ignored by the Distiller). And if in fact you are creating pre-separated PDF, you are really using a non-supported, strongly not-recommended workflow.
    Assuming that you are using a composite color PDF workflow, separation colorant line frequency and angles is normally handled automatically by any modern-day RIP. If you are sending your PDF files directly to a RIP, this separation colorant line frequency and angle information is normally either set via JDF commands or via the RIP's operator console and/or job submission system and is not somehow extracted from the PDF file itself. Many RIPs totally ignore such information, especially if they use FM or proprietary screening techniques.
              - Dov

  • Iphoto 08 Printing Options limited???

    Is it me? or is the new Iphoto in I LIFE 08 more limited in it's printing options.
    In 06 and earlier it had options for printing greeting cards, n-up and other options for printing.
    Now it seems if you want to take an image ie. and print your own greeting card.. you can only
    do a greeting card if you purchase it thru apple ?? is it me or is there something Im missing?
    Also wondering how to print to standard Epson or Kodak Photo paper templates from i photo?

    ericsf:
    Welcome to the Apple Discussions. iPhoto 6's greeting cards were difficult to print as they, as the current batch, were based on 7 x 10 inch stock. to print both sides in register one would have to trim the stock to 7 x 10 beforehand and have a printer that would handle 7 x 10 borderless. I don't know of any printers that do support 7 x 10 borderless. It's the same with iPhoto 7.
    If you have a 3rd party editor that supports layers, Photoshop Elements, Photoshop or Pixelmator, you can follow Tutorial #8 to print the cards borderless.
    The n-up is possible but more difficult to find and execute. See Anastassios T's post in this thread: http://discussions.apple.com/thread.jspa?threadID=1142792&tstart=0.
    Happy Holidays
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • J4550 All In One Two Sided Printing Option Lost after re-installation!?!?!?

    Was wondering what I am doing wrong.
    My computer crashed over the weekend and I had to restore to factory defaults.
    I re-installed the printer from the installation disk that came with my All in One J4550.
    I opened up a powerpoint of some menus I had made and printed before.
    When I went to print out these menus there was no option available for 2 sided manual printing in the printing options/preferences page.
    Before the reinstallation I had been able to print up menus using the 2-sided printing. Now it's nowhere to be found. Was this option maybe made available through an update or something?? I have downloaded several to no avail. Thanks for your help!

    Hi Jill542,
    if you goto the HP Officjet J4550 Printing Preferences > Printing Shortcuts tab, do you see "Manually" available in the  "Print On Both Sides" option?
    if you goto the HP Officjet J4550 Printing Preferences > features tab, do you see the "Manual" avilable in the "two sided printing options"? if you couldnt' see the "two sided printing optios" at all it might be due to you have unchecked the "enabled advanced printing features" in the print driver. to enable this you can
    1. right click on the HP Officejet J4500 printer icon
    2. click on the advanced tab
    3. check "enabled advanced printing features"
    4. now if you go back to printing preference again you should see the "two sided printing options "available in the feature tab
    Say "Thanks" by clicking the blue Kudos star in the post that helped you.
    I am employed by HP .....(Although I am employed by HP, I am speaking for myself and not for HP)

  • (( Hello -ENABLE REPORT PRINTING - OPTION NOT SHOWING  ))

    2010-07-28
    Hello,
    I am trying to print a report in APEX 4.0
    using the free account APEX.ORACLE.COM .
    I learning how to do this using the tutorial at:
    http://st-curriculum.oracle.com/obe/db/apex/r40/apexstart/apexstart_b/apexstart_b_ll.htm
    In the tutorial it says:
    (about 40% down the page)
    17 .
    Select Yes in the ****Enable Report Printing**** drop-down menu and select Portrait in the Orientation drop-down menu under Page Attributes. Then click the Page Header tab.
    The screenshot the tutorial shows looks like this:
    HTTP://mankindwins.com/__7700-2900-APEX-GLOBAL-201/850-500-SCREENSHOTS-FOR-EMAILS-203/ENABLE-REPORT-PRINTING--SCREENSHOT-FROM-TUTORIAL.jpg
    However, when I go into the page for my application, the screen looks
    like this:
    HTTP://mankindwins.com/__7700-2900-APEX-GLOBAL-201/850-500-SCREENSHOTS-FOR-EMAILS-203/PRINT-ATTRIBUTES--FROM-INSIDE-APEX-PAGE.jpg
    As you can see, there is no option for:
    ****ENABLE REPORT PRINTING****
    What do I have to do this make this option appear?
    How do I get the
    ****ENABLE REPORT PRINTING****
    option to appear?
    I believe I saw something somewhere that said you had to do
    so-and-so to ****enable report printing****.
    How do you do this?
    Thanks for your help!
    DAVID888
    Edited by: DAVID888 on Jul 28, 2010 11:30 PM

    Hi,
    What model number is listed o the back of the printer?
    The HP Wireless Direct feature is only available for the CE658A model, not for the CE657A model.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Printing options changed in new version

    Just upgraded to Leopard and a new iMac, but in iPhoto the print options/editing is changed. I hate it! Is there any way to get the old layouts back?
    I need to print multiple different pictures on one page in various sizes, borderless. These are not complicated requests--it was easy in the old versions. How do I do it in this version? (7.1.1)

    Apple is well aware of this issue , many people have the same issue with this crap for an update, they can't fix it, giving everyone lip service. Just don't buy anything till they fix it.

  • Missing print options - Canon MP600 and ????

    Well I discovered the hard way another function deleted in SL!
    I have a Canon MP600 multifunction unit. Now when I go to print, I can NOT specify certain pages to print such as 1, 3, 7, 10. In Tiger & Leopard I could.
    I finally found the option for printing all even or all odd pages under "Paper Handling". This helps but this means I have to switch to another screen to get that option. And why there instead of under instead of "Duplex Printing and Margin", a more logical place for the even or odd selection if not on the main page.
    Also missing is the option to just print the current page.
    For one document I wanted to print, I selected the pages one-by-one on the first page of the printer dialogue by selection a range of say 3 to 3.
    Is this all the SL printer driver? Will the old Leopard driver work? If so how do I get it back?

    John Mertes wrote:
    I have a Canon MP600 multifunction unit. Now when I go to print, I can NOT specify certain pages to print such as 1, 3, 7, 10. In Tiger & Leopard I could.
    I agree with Todd. You must have been using Office or Acrobat or some other application that provided this feature. The Preview application included with 10.6 has exactly the same print options as that provided with 10.5.
    I finally found the option for printing all even or all odd pages under "Paper Handling". This helps but this means I have to switch to another screen to get that option. And why there instead of under instead of "Duplex Printing and Margin", a more logical place for the even or odd selection if not on the main page.
    The Duplex Printing menu is provided by Canon. It is known as a PDE (Print Dialog Extension). When you think about, if the printer can print duplex then you usually don't want to print odd or even pages. This is more suited for printers that have no duplex option, where you would need to print one side then reload and print the other - hence it being provided by Apple and not the vendor.
    Also missing is the option to just print the current page.
    Preview does have an additional menu under File called 'Print Selected Page'.
    For one document I wanted to print, I selected the pages one-by-one on the first page of the printer dialogue by selection a range of say 3 to 3.
    That was also the case with Preview on 10.5. So again, you must be referring to a particular application that had print current page. BTW - if it was Acrobat you were using on 10.5 then this is still available with 10.6.
    Is this all the SL printer driver? Will the old Leopard driver work? If so how do I get it back?
    No. The issues you are mentioning appear to be application specific. As for installing the Leopard driver on 10.6, I don't believe the driver v5.8.3 for 10.5 and earlier can be used on 10.6. In testing the installation of the v5.8.3 driver on 10.6, it did appear to install but without an MP600 to connect to I cannot be certain it will work. So you may need to test this yourself. But that said, I don't believe the v5.8.3 driver will give you back the settings you want...
    Pahu

  • Adobe as a print option,any one help?

    having trouble using adobe as a print option can any one help?

    Hi jencsm52,
    I would be happy to help. Are you trying to use the Adobe CreatePDF Desktop printer to print to PDF? If so, have you installed and configured this printer yet? (If not, it's available only on Windows, so please let me know what OS you're using.)
    I look forward to hearing back from you.
    Best,
    Sara

  • Adobe Reader 10.1.2 Print options

    Hi,
    I noticed that the print options have changed to "actual size", "fit" and "shrink oversized pages"
    None of these work for me.  I need to have "page scaling set to none" back.  How can I get this?
    Thanks
    Dan

    "Actual Size" option is the new name for "None".
    In the previous releases, we had "Shrink" option as the default print option which has been renamed as "Shrink oversize pages" and is no more the default option.
    I hope this helps.
    Thanks,
    Atul

  • Canon i9900 - need printing options

    I know that one of the new features for leopard is "simplified printing." I have a 13x19 canon i9900 printer where i print out a lot of my design work. One of the most useful "can't live without" features is the ability to change color options through the printer driver... as well as all the other features that the driver provides. I also don't know where i go to get the print head alignment options as well.
    How do I get these options back? The "Simplified Printing" is not useful to me. I really need the old options to print my work properly... i tried to do without and i am not getting the results that I used to. Is there a new driver download for the canon i9900 that is compatible for leopard... if not, when will there be one?
    Please answer ASAP, I would really appreciate it.

    I only have CS3. I used the Leopard provided driver. Here is what I see:
    Photoshop: You do file-print. You get the Adobe print dialog. From there you hit the "Print" button. This takes you to the Apple print dialog. From there you hit the blue triangle. This gives you the expanded print dialog. 3/4 of the way down the dialog, there is a seperator (Below copes, pages, Orientation, etc) From that pop-up I can select all the normal printer options panles.
    Illustrator: You do file-print. You get the Adobe print dialog. From there you hit the "Printer" button (Second from the left). This talks you to the Apple print dialog. From there you hit the blue triangle. This gives you the expanded print dialog. The optioned are there too.
    Hope this helps.

  • Printing options from word document

    I have always been a PC user, but I just got a MacBook Pro, and I cant figure out how to change the printing options from microsoft word. I like to change to lower quality prints for daily work, but the preferences are somehow set to best. I need help!!

    Hi @nish123 , and welcome to the HP Forums!
    I understand you're having issues printing, I'd like to help!
    I have a couple of questions before we get started:
    -What printer are you using?
    -Do you have any issues printing from Notepad?
    In the meantime, I'd recommend removing the ink cartridges, and performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also suggest downloading and running the HP Print and Scan Doctor.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • FEATURE REQUEST: 'Select Printer' option when printing envelopes or labels

    I have a Samsung laserjet printer that will not print labels properly with the default paper type setting...the toner smears. So I have created a second printer object for the Samsung device with 'Labels' selected as the default paper type and I've named
    it 'Samsung Labels'. I can select it as the printer in Word 2010 and it will print labels correctly for that session. I've read the discussion about Word 2010 only remembering the printer preferences during the current session. That is unfortunate, but I consider
    this to be even worse: when you click the 'Print' button after creating your label or envelope, Word just prints to the default printer without displaying the print control panel. This prevents me from selecting the printer object that I've created to print
    labels correctly with my Samsung. I use a number of different printers and I don't want to necessarily use my default printer for Word. I want to be able to select a different default printer for Word and also have the option to select a different printer
    for a particular print task in Word...like labels. I don't want to have to go into Word's print options every time I want to print a label and make sure that everything is set correctly. It makes no sense that I can't select a printer object when I hit the
    print button. There are a million 'features' built into Office that I would never think of using, but one that seems so obvious is missing. Arg!
    I doubt that I'll hear back from someone with a simple work around for this, but I'd love it if I did.
    Thanks in advance,
    Wayne
    Wayne S. CompTIA A+ CompTIA Network+ Microsoft MCP

    I would like to second Wayne's suggestion but I am concerned with printing envelopes, not labels. I have been a PC user (and even an instructor) since the days of VisiCalc, Lotus 1-2-3, and the first Microsoft products. It has never ceased to amaze me
    that, as mentioned by Wayne, the most fundamental needs are overlooked. It wastes a lot of my time to constantly have to change the printer just to print an envelope or to print something on letterhead. We have a lot of documents that include one letter on
    letterhead followed or preceded by several pages that need to print on plain paper. I think I should be able to tell Word that page X is letterhead, and the others default to the plain paper tray or printer. I also should be able to tell the print envelopes
    feature that envelopes are on printer X or tray X. Then every time I need to print such a document, I just click print for the doc and envelope print for the envelope (I keep an icon for this in my toolbar). We use a legal software package in our office that
    lets you specify the appropriate printer and tray for reports, general checks, trust checks, labels, receipts, deposit slips, bills and pre-bills! Super easy and convenient. Word processing should be SMART so we don't have to be bothered with these very mundane
    and never-ending printer issues!! Please, please, take this to the top! Please send your developers to actual real-world users and find out our needs!!!

Maybe you are looking for