No batch input data for screen  occured in Call Transaction method for PA40

Hi,
I creatred an interface to update an employee action data ( Change of position )  PA40 by using  Call transaction method.
while executing the  interface, I got the below error.
No batch input data for screen MP049100 200 
this interface updated the first employee from file,  then after it is giving the below error frequently.
No batch input data for screen MP049100 200
regards,
Ashok Reddy Revoori

The infogroup of action Change Position may be having infotype 0491. The infotypes screen sequence is decided based on employee's country grouping and user group. For the employee where you are receiving error, infotype 0491 screen is appearing for which you do not have BDC data.

Similar Messages

  • Call transaction method for MM42

    Hi Guis,
    I am using MM42 tcode  to Maintain  the article  Sales Orgnisation wise . For this I am using Call transaction method.
    Program is working fine in Display mode when I excute it in No display mode for some Sales Org I am getting message that
    'SOME OF THE GROUP DATA HAS BEEN BLOCKED BY ABAPER(My id) '  .
    I tried using diffrent recording  ways but the problem is not solving .
    Will you please any body solve my problem .
    Thanks,
    Santhosh.V

    HI,
    Check in SM12 and see fi there are any locks with ur id.close all the internal sessions and refresh the lock list..
    Now try again and see. Hope your id is not shared
    Regards,
    Nagaraj

  • Screen no change in BDC call transaction method

    Hi experts
    Greetings!
    I have a BDC created in call transaction method for t-code FB01.
    Data passed successfully to the first screen but when it navigates to the second screen I am not able to pass any data.
    After debugging I found that the issue was because of the DYNPRO value.
    It was 8500 when I created this recording but now the screen number shows 350.
    Is is possible that screen nos change because of any support stack or OSS notes implementation.
    In run time i tried to change the value to 350 and it works fine..
    Thanks
    Jay

    Hi,
    LSMW Direct input method is better for your quiry. Becasuse i wrote BDC for FB01 but not working properly.
    So i used LSMW, helped me a lot. Progmra name is RFBIBL00. Or else i will export and send you if you want. It can handle multiple line items upto 950.
    Thanks,
    Sriram

  • Error: No batch input data for screen SAPMZVKDIALOGDEMO 1000 Help Needed

    Hi Experts!
    I wrote a program for BDC. I am attaching the code herewith. When i am trying to process the session in SM35, i was getting the error: No batch input data for screen SAPMZVKDIALOGDEMO 1000. Can anyone please tell me, what am i doing wrong.
    Thanks.
    REPORT  zvkbdcdemo01.
    DATA: bdc_tab LIKE bdcdata OCCURS 6 WITH HEADER LINE.
    DATA: session LIKE apqi-groupid VALUE 'Session #1'.
    CALL FUNCTION 'BDC_OPEN_GROUP'
      EXPORTING
        client                    = sy-mandt
    *   DEST                      = FILLER8
        group                     = session
    *   HOLDDATE                  = FILLER8
    *   KEEP                      = FILLER1
        user                      = sy-uname
    *   RECORD                    = FILLER1
    *   PROG                      = SY-CPROG
    * IMPORTING
    *   QID                       =
    * EXCEPTIONS
    *   CLIENT_INVALID            = 1
    *   DESTINATION_INVALID       = 2
    *   GROUP_INVALID             = 3
    *   GROUP_IS_LOCKED           = 4
    *   HOLDDATE_INVALID          = 5
    *   INTERNAL_ERROR            = 6
    *   QUEUE_ERROR               = 7
    *   RUNNING                   = 8
    *   SYSTEM_LOCK_ERROR         = 9
    *   USER_INVALID              = 10
    *   OTHERS                    = 11
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    PERFORM fill_bdc_tab.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        tcode                  = 'ZVKTR001'
    *   POST_LOCAL             = NOVBLOCAL
    *   PRINTING               = NOPRINT
    *   SIMUBATCH              = ' '
    *   CTUPARAMS              = ' '
      TABLES
        dynprotab              = bdc_tab
    * EXCEPTIONS
    *   INTERNAL_ERROR         = 1
    *   NOT_OPEN               = 2
    *   QUEUE_ERROR            = 3
    *   TCODE_INVALID          = 4
    *   PRINTING_INVALID       = 5
    *   POSTING_INVALID        = 6
    *   OTHERS                 = 7
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'BDC_CLOSE_GROUP'
    * EXCEPTIONS
    *   NOT_OPEN          = 1
    *   QUEUE_ERROR       = 2
    *   OTHERS            = 3
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *&      Form  fill_bdc_tab
    *       text
    FORM fill_bdc_tab.
      REFRESH bdc_tab.
      PERFORM populate_bdc_tab USING:
      '1' 'SAPMZVKDIALOGDEMO' '1000',
      ' ' 'SFLIGHT-CARRID' 'LH',
      ' ' 'SFLIGHT-CONNID' '0400',
      ' ' 'SFLIGHT-FLDATE' '07/07/2007',
      ' ' 'SFLIGHT-PRICE' '1982',
      ' ' 'SFLIGHT-CURRENCY' 'EUR',
      ' ' 'SFLIGHT-PLANETYPE' 'A310-300',
      ' ' 'BDC_OKCODE' 'CREA'.
    ENDFORM.                    "fill_bdc_tab
    *&      Form  POPULATE_BDC_TAB
    *       text
    *      -->FLAG       text
    *      -->VAR1       text
    *      -->VAR2       text
    FORM populate_bdc_tab USING flag var1 var2.
      CLEAR bdc_tab.
      IF flag = '1'.
        bdc_tab-program = var1.
        bdc_tab-dynpro = var2.
        bdc_tab-dynbegin = 'X'.
      ELSE.
        bdc_tab-fnam = var1.
        bdc_tab-fval = var2.
      ENDIF.
      APPEND bdc_tab.
    ENDFORM.                    "POPULATE_BDC_TAB

    This normally means that you are trying to insert data on a screen for which a particular field is not available.
    So check screen number, screen fields and report name. In case of screen fields, use F1, F9 (technical information), and check the name of the screen field for batch processing (all the way at th bottom of the pop-up). This can differ from actual name of the screen field.
    If all this is ok, try to create a recording of the transaction with SM37.

  • BDC - Session Method - No batch input data for screen  SAPMZ_TPSCREEN02 100

    Hi ABAP Experts,
    I have written a Dialog Program For a Screen Which contains 5 fields namely,
    carrid,
    connid,
    fldate,
    price,
    planetype.
    I have written the PAI logic to insert whatever entries entered in the fields, into Database Table SFLIGHT.
    I created a Transaction and Tested whether the entries are succesfully entetered into the Database Table and it works just fine.
    Now i planned to write a BDC program for the above Transaction so that i can upload data to the Database table from a flat file.
    I went to SHDB transaction and created a new recording and transferred the program to generate a source code.
    include bdcrecx1.
    start-of-selection.
    loop at itab.
    perform open_group.
    perform bdc_dynpro      using 'SAPMZ_TPSCREEN02' '1000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=CREA'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'SFLIGHT-PLANETYPE'.
    perform bdc_field       using 'SFLIGHT-CARRID'
                                  'AA'.
    perform bdc_field       using 'SFLIGHT-CONNID'
                                  '0017'.
    perform bdc_field       using 'SFLIGHT-FLDATE'
                                  '11/01/2007'.
    perform bdc_field       using 'SFLIGHT-PRICE'
                                  '767'.
    perform bdc_field       using 'SFLIGHT-PLANETYPE'
                                  'A310-200F'.
    perform bdc_transaction using 'Z_TPSCREEN02'.
    perform close_group.
    Then i defined an internal table which contains the same fields as those in my Screen and Transaction.
    I populated the internal table from a flat file using GUI_UPLOAD function module.
    I want to clarify - I got this flat file by using the GUI_DOWNLOAD module and later i uploaded the same file using GUI_UPLOAD.
    I tested whether the internal table is populated or not using LOOP  AT ITAB. WRITE Statements.
    Its working just fine.
    Finally my code look like this.
    report ZVMREC
           no standard page heading line-size 255.
    TABLES: sflight.
    DATA: BEGIN OF itab OCCURS 0,
    carrid LIKE sflight-carrid,
    connid LIKE sflight-connid,
    fldate LIKE sflight-fldate,
    price TYPE sflight-price,
    planetype TYPE sflight-planetype,
          END OF itab.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                      = 'C:\users\vamc\documents\flightinfo.txt'
        FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = 'X'
      tables
        data_tab                      = itab.
    include bdcrecx1.
    start-of-selection.
    loop at itab.
    perform open_group.
    perform bdc_dynpro      using 'SAPMZ_TPSCREEN02' '1000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=CREA'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'SFLIGHT-PLANETYPE'.
    perform bdc_field       using 'SFLIGHT-CARRID'
                                  'AA'.
    perform bdc_field       using 'SFLIGHT-CONNID'
                                  '0017'.
    perform bdc_field       using 'SFLIGHT-FLDATE'
                                  '11/01/2007'.
    perform bdc_field       using 'SFLIGHT-PRICE'
                                  '767'.
    perform bdc_field       using 'SFLIGHT-PLANETYPE'
                                  'A310-200F'.
    perform bdc_transaction using 'Z_TPSCREEN02'.
    perform close_group.
    endloop.
    I checked for errors, activated and executed.
    I gave session name and executed, it generated same number of sessions as number of records.
    I went to SM35 and Processed one of the sessions in foreground.
    It brought my screen up with all fields fill up by the fields of first record in the internal table and with
    OK Code popping up.
    I check the OK Code.
    Now the problem has come up, its says
    *No batch input data for screen SAPMZ_TPSCREEN02 1000 *
    My session was now incorrectly processed,
    Please help me to fix this problem.
    I searched so many forums and google it a lot.
    But i didn't find any clue.
    Kindly take your time and have a look at this problem and let me know how can i fix it.
    Thank you very much all.
    Shiv
    Edited by: Sivaram  Naga on Apr 15, 2008 5:57 AM

    I used this code to convert the date format. I'm still getting the short dump.
       DATA: v_yyyy(4) TYPE c,
           v_mm(2) TYPE c,
           v_dd(2) TYPE c,
           v_date(8) TYPE c.
    v_yyyy = itab-fldate(4).
    v_mm = itab-fldate+4(2).
    v_dd = itab-fldate+6(2).
    concatenate v_yyyy v_mm v_dd  into v_date. 
    I'm once again, putting my code.
    report ZVMREC
           no standard page heading line-size 255.
    TABLES: sflight.
    DATA: BEGIN OF itab OCCURS 0,
    carrid LIKE sflight-carrid,
    connid LIKE sflight-connid,
    fldate LIKE sflight-fldate,
    price TYPE sflight-price,
    planetype TYPE sflight-planetype,
          END OF itab.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                      = 'C:\users\vamc\documents\flightinfo.txt'
        FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = 'X'
      tables
        data_tab                      = itab.
    include bdcrecx1.
    start-of-selection.
    loop at itab.
    DATA: v_yyyy(4) TYPE c,
           v_mm(2) TYPE c,
           v_dd(2) TYPE c,
           v_date(8) TYPE c.
    v_yyyy = itab-fldate(4).
    v_mm = itab-fldate+4(2).
    v_dd = itab-fldate+6(2).
    concatenate v_yyyy v_mm v_dd  into v_date.
    perform open_group.
    perform bdc_dynpro      using 'SAPMZ_TPSCREEN02' '1000'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=CREA'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'SFLIGHT-PLANETYPE'.
    perform bdc_field       using 'SFLIGHT-CARRID'
                                   ITAB-CARRID.
    perform bdc_field       using 'SFLIGHT-CONNID'
                                   ITAB-CONNID.
    perform bdc_field       using 'SFLIGHT-FLDATE'
                                  V_DATE.
    perform bdc_field       using 'SFLIGHT-PRICE'
                                   ITAB-PRICE.
    perform bdc_field       using 'SFLIGHT-PLANETYPE'
                                  ITAB-PLANETYPE.
    perform bdc_transaction using 'Z_TPSCREEN02'.
    perform close_group.
    endloop.
    Kindly take a look at it and please help me out. I tried very hard. But i dont understand why?
    Thanks
    Shiv
    Edited by: Sivaram  Naga on Apr 15, 2008 5:46 PM

  • Error ''No batch input data for screen SAPMF05A 0701'' with interface

    Hi,
    While I ran an interface from our legacy (vendor invoice), this message appeared in AL11 ''No batch input data for screen SAPMF05A 0701''  I saw in the pass ''No batch input data for screen SAPMF05A 0700''  but never 0701.  I'm not able to find a lot of documentation that help me.  Does anyone know what can cause this?

    HI,
    You can check by yourself the reason of the error in the following way,
    related to note 26050.
    Please check all the 3 points and furthermore please follow the
    third that says:
    1.  Call up Transaction FBV0 and branch to the list.
    2.  Select the parked document in which the termination occurs, and
         create a batch input session via 'Edit -> Create batch input'. Then
         process the batch input session in the foreground.
    Processing the batch input in foreground, You will be able to find out
    the reason of the error message You have.
    So, please call transaction FBV0   > Push the button "Document list"   >
    Execute then choose the document You want to post and push the button
    "Create batch input"    > When the batch input session is created, go
    to transaction SM35 and run it in foreground in order to find out
    the problem.
    Kind Regards,
    Fernando Evangelista

  • No batch input data for screen SAPMF02K 0101 for transaction XK02

    Hello Friends,
    I am Trying to change detaisl of Vendor using IDOC for T code XK02, I am getting an error in background
    No batch input data for screen SAPMF02K 0101
    Message no. 00344
    When I execute in foreground it is working fine.
    Diagnosis
    The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data.
    Possible reasons:
    1. The batch input session was created incorrectly. The sequence of screens was recordly incorrectly.
    2. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
    3. The transaction has undergone user-specific Customizing and therefore certain screens may be skipped or processed differently, according to the current user. If the person who created a batch input session is not the same as the person now processing it, this problem may occur frequently.

    just info: as u seen in the 3rd point, if u r running onlien, its recorded on ur user id, but, where as for back ground, the user lke WF_BATCH.........so, for this user, the settings may b different from a dialog user, in terms of  screen sequence, pop-ups. mandatory fields.
    So, i guess, u r missing to populate a input field, which is mandatory. May be by suing sy-batch IF condition, u hv to change CTU_PARAMS values, like sy-batin = 'X'......actually, these day si dont hv SAP access, so, pls. check some terms in this response.
    thanq

  • No batch input data for screen SAPMF05A 0614

    Hello,
    We are encountering an error in automatic clearing (FB05) of inbound IDOC type PEXR2002 (Remitance Advice). The error message is "No batch input data for screen SAPMF05A 0614" and it relates to the fact that we are clearing multiple accounts (Customer Account & A/P Rebate Account). We have added the "Cash-Flow Relevent" setting to all of the GL Accounts involved as per OSS note 25200. However in automatic clearing when the program is populating the "Assign payment amounts" screen 0614 it is only poplulating the Payment amount with the net payment amount instead of the gross payment amount. Because there is still an amount "To be assigned" the screen is expecting some further action.
    Has anyone encountered this problem? And if so how did you go about resolving it?
    Thank you in advance.
    Mark Fleckles
    Manager, Financial Systems
    Sephora USA, Inc
    [email protected]

    Hello Naveen,
    The error message appears in the IDOC Status record and there is nothing in SM35. We were able to step through the program code to determine exactly where the error is occurring. And it is on screen SAPMF05A 0614. There is an OSS note 25200 which addresses this problem but after following the steps to assign "Relevant to cash flow" setting to all GL accounts involved the problem still exists. Somehow it is not recognizing the Rebate account when the system populates the "Payment amount". It only recognizes the Customer A/R Account. We are not sure how to resolve...
    Thanks,
    Mark Fleckles

  • No batch input data for screen  for VF01

    Hi All,
    Iam trying to to create billing document using  BDC for VF01 with  sales order. For single line item it is working fine and that to in Mode 'A'. But while  creating invoices using multiple sales orders  , Iam getting the following error.
    No batch input data for screen 'SAPMV60A' '0102' . Error  - 0344. 
    Kindly help me as I was strucked here.
    My code .
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0102'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'KOMFK-VBELN(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'KOMFK-VBELN(01)'
                                      gwa_bdc-vbeln.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=SICH'.
        REFRESH messtab[].
        CALL TRANSACTION 'VF01' USING bdcdata
                         OPTIONS FROM wa_options
                         MESSAGES INTO messtab.
    Please <removed by moderator> help.
    Thanks ,
    Srikanth.A
    Edited by: Thomas Zloch on Sep 15, 2011 1:47 PM

    Hi Jurgen
      LOOP AT git_bdc INTO gwa_bdc.
       refresh messtab[].
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0102'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'KOMFK-VBELN(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'KOMFK-VBELN(01)'
                                      gwa_bdc-vbeln.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=SICH'.
        REFRESH messtab[].
        CALL TRANSACTION 'VF01' USING bdcdata
                         OPTIONS FROM wa_options
                         MESSAGES INTO messtab.
    Error message population....
    REFRESH bdcdata[].
    ENDLOOP.
    Thanks,
    Srikanth.A

  • No batch input data for screen SAPMSSY3 0131 in Sales order IDOC

    I am processing Sales order IDOCS in status 64 using RBDAPP01 .Some of them error out to status 51 with the message -
    No batch input data for screen SAPMSSY3 0131 .
    I know the standard IDOC inbound process tries to simulate the posting in a BDC like process.
    Now, I went to we19 and the screen hangs up in a pop up in the partners tab with partner type 'WE' and my shipto (which is actually filled in the IDOC), missing..upon repeatedly hitting enter, it goes thru and an idoc is posted in status 53. But still unable to get through the root of this issue.
    Any, insight will help.

    Hi,
    I think the pop-up is generated through and user-exit for which recording is missing. This is why your idoc stays in status 64...
    Handle the screen recording in the user exit IDOC_INPUT_ORDERS
    user exit routine
    PERFORM customer_function_dynpro.
    FORM CUSTOMER_FUNCTION_DYNPRO.
      CALL CUSTOMER-FUNCTION '002'
        EXPORTING DXVBAK   = XVBAK
                  DVTCOMAG = VTCOMAG
                  DLAST_DYNPRO = LAST_DYNPRO
                  DXMESCOD = IDOC_CONTRL-MESCOD
        TABLES    DXBDCDATA = BDCDATA
                  DXVBAP    = XVBAP
                  DXVBEP    = XVBEP
                  DYVBEP    = YVBEP
                  DXVBADR   = XVBADR
                  DYVBADR   = YVBADR
                  DXVBPA    = XVBPA
                  DXVBUV    = XVBUV
                  DIDOC_DATA = IDOC_DATA
                  DXKOMV    = XKOMV
                  DXVEKP    = XVEKP
                  DYVEKP    = YVEKP
        EXCEPTIONS
                  USER_ERROR = 01.
    Regards,
    Krishnakumar

  • Error in LSMW for MM41 - "No batch input data for screen SAPLMGMW 0100"

    I'm trying to create an LSMW for MM41 to create new Retail articles en Mass. This will be used to only create the Basic view as other LSMW's already exist to maintain the other views. I've created the Recording and setup the LSMW already. My data is read correctly from the source file. When I execute the batch session it fails with the following error - "No batch input data for screen SAPLMGMW 0100".
    I assume the fields in MM41 screen are not setup for batch processing. Could someone with more knowledge or experience in SAP Retail please confirm my assumption and explain where this is setup or provide an alternative to creating new articles en Mass via MM41? The direct input method is more suited for MM01 and not MM41.
    Regards
    Fawaaz

    Hi Guys,
    Thanks so much for all the prompt responses. My issue is now resolved.
    The issue, I'm sure, was my default settings in the MM41 screen which the recording probably took into account or the batch program didn't like. I deleted my recording and created a new one but before I started the recording, I went into the MM41 screen and removed all default values AND view selections. I made my Basic view selection constant in my recording and also in my field mapping. My LSMW for MM41 is now working perfectly.
    Just to answer some of the questions above, my LSMW was Reading and Converting the data in my source file fine. When I display the Read and Converted data, it shows the data fields in the correct place.
    Thanks again.
    Regards
    Fawaaz

  • "no batch input data for screen SAPLMR!M 6220  in BDC while holding Invoice

    Hi
         I am facing a problem while uploading Invoice data and to hold the data in miro transaction I am getting the error
         "no batch input data for  screen SAPLMR!M  6220 " . It is for non PO data only I am facing this problem using BDC.
         But for  Po based Invoice  I am getting Invoice number while holding the Invoice. I am  Using SHBDB to record the    
          transaction   details
        Please give me some solution regrading this.
    Samir

    Krish ,
                I am doing it in same transaction MIRO  for both  PO and NON-PO. I am able to generate an Invoice number while holding   the Invoice  For NON-PO taking vendor as invoice Party .While I am recording it in SHDB and trying to use the
    same in my BDC Programe it is throughing this error and also by testing the program which has been generated by the 
    SHDB trnasaction i am getting the same Error . Is there any diferrent trnasaction that is used to hold NON_PO invoice ?
    Where Invoice number will be generated automatically ?

  • No batch input data for screen SAPMSSY3 0131

    Dear All,
    I have developed a report where i need to upload (old and new)incoterms,payment terms,document type  and update in the table ekko with my new values (incoterms,payment terms and document type).
    Problem :For this report i have uploaded the excel sheet and values are getting uploaded into my internal table.but when using bapi_agreement_maintain to update the ekko table ,in return table its showing No batch input data for screen SAPMSSY3 0131.
    Anyone please give the reason/solution to solve the problem.
    Regards,
    Bhavani.

    Hi,
    screen SAPMSSY3 0131 is the debugging screen so if you have any break-points in any of the transactions remove the breakpoint and check.
    Basically this BAPI is calling a transaction to execute a transaction in no dialog mode so if you have break-points in any of those program you will face this issue.
    Regards,
    Himanshu

  • Error message 00 344 : No batch input data for the screen SAPMF02D 0324

    Hi Experts,
    We are working with SAP CRM 4.0 and SAP R/3 6.20
    We have an important number of BDocs (type 'BUPA_MAIN' ) in status  E02 with the error message
    00 344 : 'No batch input data for the screen SAPMF02D 0324'.
    Can any one help us to explain the cause of this message and how to resolve it ??
    Thanks you in advance for your help !
    Best regards,
    Nabil.

    Any ideas ?
    We really appreciate your help !

  • FBRA: No batch input data for screen SAPMF05A 0700

    Hi Gurus,
    I am processing transaction code FBRA on foreground. The document that i am trying to reset involves a foreign currency transations which revaluated periodically.
    When I try to reset the document it gives me noteice that "exchange rate differences were posted, clearing document will be reversed. do you want to continue?"
    When I press OK, it ask me to enter ther reversal reason "02". Then it gives me an error that "no batch input data for screen SPAMF05A 0700"
    Please help me to solve this.
    Many thanks!
    -JUN-

    Dear JUN,
    All this is telling you is that there is some piece of information that you are not supplying the batch input session. You can analyse the session in SM35 to see what's missing.
    Reward points if it is helpful.
    Thanks and Regards,
    Naveen.

Maybe you are looking for