No batch input data for screen SAPMSSY0 0120 when running BDC in background
Hi Experts,
I am facing an issue "No batch input data for screen SAPMSSY0 0120" when running a BDC for VA01 in background.
The scenario is like we have EDI orders coming into SAP in the form Idocs. These EDI orders are processed by Function module
IDOC_INPUT_ORDERS. This FM module internally calls VA01 (Call Transaction) to create Sales Orders in SAP.
Now we have a scenario in which we want a popup screen to come up & ask for selection of record from list of records displayed on popup screen. In background since we can not show up a screen, we are programatically selecting the record we want & going ahead.
Now what is happening is during foerground the functionality is working abosultely fine, that is incoming idoc is getting posted successfully in SAP with status of 53. Incase of back ground processing of the same we are getting an error
No batch input data for screen SAPMSSY0 0120
I have checked this screen through screen painer(SE51) & i did not find any element on this screen but Element list
shows one field Syst-Xcode.
Kindly guide me how to fix the issue so that the same can work as expected in background.
Regards,
Chetan.
Hi Chetan,
List screens utilize SAPMSSY0/0120. Please check within your ABAP coding if you have any customer exit that tries to issue WRITE statements. If so, either remove them or add logic to not issue them in background (e.g. SY-BATCH = 'X'). Another culprit might be a SUBMIT statement in a user exit, which triggers a report with list output. I'm not completely sure, but I think the screen is also used for some value helps (do you have any coding forcing a value help popup?).
Hope this helps, harald
Similar Messages
-
No batch input data for screen SAPMSSY0 0120 in LB13
Hi,
I am trying to post TO in background using transaction LB13.
I am getting error 'No batch input data for screen SAPMSSY0 0120' when I execute the transaction.
I found out that this is the problem arising due to not passing data to one of the screen not passed to BDC.
How should I solve this error?
Thanks/Regards,
Abhijit Anandgaonkar.Hi
You pl.run BDC in fore ground, identify the data which is not passing & analyse this with programmer & correct the same.
REgards
YMREDDY -
No batch input data for screen SAPMSSY0 0120
HI All,
I am trying to process an Inbound IDOC via IDOC_INPUT_ORDERS. But when I do this I am getting the following message:
No batch input data for screen SAPMSSY0 0120
And the IDOC goes into error.
When processing the IDOC again via WE19 in foreground, I see a screen which pops up where it states:
<matnr> has Phase out Status, valid from 01.01.2011
the only way to get this screen out of the way is to cancell. But this is not working when I do WE19 in background. Does anybody have an answer on this one?
Best regards,
Guido KoopmannHi Raymond,
I checked out your note and see that it's valid for release: SAP_APPL 470 and my version for SAP_APPL is 500 level 19.
The SAP_BASIS version in 640 level 21.
So would be meanig that this note is not valid for me right?
Best regards,
Guido Koopmann -
No batch input data for screen SAPMSSY0 0120 error while running LSMW
I created Batch Input Recording for custom check register screen. I completed all the necessary steps but when I process the batch input session, my upload fails and gives me the following error:
No batch input data for screen SAPMSSY0 0120
I ran the Batch input in foreground to see what data am I missing and found out that one of the screen required a "DOUBLE CLICK" as user input and seems that LSMW is not able to process the "DOUBLE CLICK" (even though Batch Input recording captured the "DOUBLE CLICK") to move forward with the transaction.
Does anyone one know How can I overcome this issue or any other workaround.
Thanks NirankarHi Chetan,
List screens utilize SAPMSSY0/0120. Please check within your ABAP coding if you have any customer exit that tries to issue WRITE statements. If so, either remove them or add logic to not issue them in background (e.g. SY-BATCH = 'X'). Another culprit might be a SUBMIT statement in a user exit, which triggers a report with list output. I'm not completely sure, but I think the screen is also used for some value helps (do you have any coding forcing a value help popup?).
Hope this helps, harald -
COGI Fail in b.ground with msg "No batch input data for screen SAPMSSY0120"
Hi Experts,
I have recorded the COGI transaction using SHDB and used in my program. I have scheduled the program in background and this is always failing with the following error "No batch input data for screen SAPMSSY0 0120". Please help me in this regard.
Thanks,
srinivas.Hi Ramya,
This screen doesn't contain any field. Also this screen shouldn't come in between of my transaction. But my program is working fine if I execute online.
Also I don't know where I need to call that screen.
Thanks,
srinivas. -
Error "No batch input data for screen" in BDC for Tcode CN22
Hi,
The issue is When teh BDC code is run by Functional guys we are facing the error as "No batch input data for screen SAPLCONW 1100", when I am trying teh change the Network Activity Level User field in Tcode CN22. When I execute the same BDC code with Developer User id, it is executing perfectly.
I have checked the User Profiles for both functional and Technical and both are same. What is my solution now?
Regards,
Deepthi.Hi
Take Recording using the functional guy log in there might be user depended screen sequence
Regards
Nilesh Gaikwad
Edited by: Nilesh Gaikwad on Jan 26, 2010 10:49 AM -
NO BATCH INPUT DATA FOR SCREEN SAPMV50A ERROR FROM BDC
HI
I get the following error when my program runs inforeground, using a BDC(VL02N)- 'NO BATCH INPUT DATA FOR SCREEN SAPMV50A SCREEN 1000.'
i am trying to attach a serial number to the sales order and it seems that the warning message is causing the error. i have recorderd the transaction to death, and as mentioned, when i run in debug mode, it works fine.
Can anyone tell me how i can overcome\suppress the warning message? i have inserted 2 okcodes before the warning is Issued and that did not help Please see below for an excerpt of the coding:.
PERFORM bdc_dynpro USING 'SAPLIPW1' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RIPW0-SERNR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'BDC_OKCODE' '=RWS'.
PERFORM bdc_field USING 'RIPW0-SERNR(01)' itab_chas_data-chas_no .
PERFORM bdc_dynpro USING 'SAPMSSY0' '0120'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
PERFORM bdc_field USING 'BDC_OKCODE' '=ENTE'.
PERFORM bdc_dynpro USING 'SAPLIPW1' '0200'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RIPW0-SERNR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE' '=RWS'.
Thanks a Million..Hi,
Try this link.
No batch input data for screen SAPMP50A 1000
Thank you, -
Error Message "No batch input data for screen SAPMF05A 0700" for FV60&FB60
Dear All,
I doing a BDC Upload program for Create Vendor Invoice and Park using FV60 ,But i can't upload successfully by Batch Input method and i am gettin the Error Message "No batch input data for screen SAPMF05A 0700'.I tried using FB60 and got the same error message. When i do in the direct method i can able to do it ,But can't park the document successfully and can do it untill sumilate only.
How to overcome this issue and if you already encounter this kind of problem please advice me.
Thanks in Advance.
DeesanthHi,
Below is my recording.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'INVFO-ACCNT' gwa_inv_up-lifnr.
perform bdc_field using 'INVFO-BLDAT' gwa_inv_up-bldat.
perform bdc_field using 'INVFO-XBLNR' gwa_inv_up-xblnr.
perform bdc_field using 'INVFO-BUDAT' gwa_inv_up-budat.
perform bdc_field using 'INVFO-MONAT' '9'.
perform bdc_field using 'INVFO-BLART' gwa_inv_up-blart.
perform bdc_field using 'INVFO-WRBTR' gwa_inv_up-dmbtr.
perform bdc_field using 'INVFO-WAERS' gwa_inv_up-waers.
perform bdc_field using 'INVFO-XMWST' gwa_inv_up-xmwst.
perform bdc_field using 'INVFO-MWSKZ' 'P0'.
perform bdc_field using 'INVFO-SGTXT' gwa_inv_up-sgtxt.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=PAYM'.
perform bdc_field using 'INVFO-GSBER' gwa_inv_up-gsber.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=BS'.
perform bdc_field using 'INVFO-ZLSCH' gwa_inv_up-zlsch.
cnt = 1.
cnt1 = 1.
clear gwa_inv_line.
loop at gt_inv_up into gwa_inv_line where indic = 'D'
and count = gwa_inv_up-count.
if cnt1 gt 1.
concatenate 'ACGL_ITEM-MARKSP(' cnt ')' into fld.
perform bdc_field using fld 'X'.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=0005'.
endif.
concatenate 'ACGL_ITEM-HKONT(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-lifnr.
concatenate 'ACGL_ITEM-SHKZG(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-shkzg.
concatenate 'ACGL_ITEM-WRBTR(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-dmbtr.
concatenate 'ACGL_ITEM-MWSKZ(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-mwskz.
concatenate 'ACGL_ITEM-SGTXT(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-sgtxt.
concatenate 'ACGL_ITEM-GSBER(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-gsber.
concatenate 'ACGL_ITEM-KOSTL(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-kostl.
concatenate 'ACGL_ITEM-PROJK(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-posid.
concatenate 'ACGL_ITEM-FISTL(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-fistl.
concatenate 'ACGL_ITEM-FIPOS(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-fipos.
concatenate 'ACGL_ITEM-GEBER(' cnt ')' into fld.
perform bdc_field using fld gwa_inv_line-geber.
perform bdc_field using 'BDC_CURSOR' fld.
cnt1 = cnt1 + 1.
endloop.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=BS'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_OKCODE' '=BP'.
call transaction 'FB60' using gt_bdcdata mode 'N' pdate 'S'
messages into gt_bdc_messages.
Thanks,
Deesanth -
No batch input data for screen for VF01
Hi All,
Iam trying to to create billing document using BDC for VF01 with sales order. For single line item it is working fine and that to in Mode 'A'. But while creating invoices using multiple sales orders , Iam getting the following error.
No batch input data for screen 'SAPMV60A' '0102' . Error - 0344.
Kindly help me as I was strucked here.
My code .
PERFORM bdc_dynpro USING 'SAPMV60A' '0102'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KOMFK-VBELN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'KOMFK-VBELN(01)'
gwa_bdc-vbeln.
PERFORM bdc_dynpro USING 'SAPMV60A' '0104'.
PERFORM bdc_field USING 'BDC_CURSOR'
'VBRK-FKART'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMV60A' '0104'.
PERFORM bdc_field USING 'BDC_CURSOR'
'VBRK-FKART'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH'.
REFRESH messtab[].
CALL TRANSACTION 'VF01' USING bdcdata
OPTIONS FROM wa_options
MESSAGES INTO messtab.
Please <removed by moderator> help.
Thanks ,
Srikanth.A
Edited by: Thomas Zloch on Sep 15, 2011 1:47 PMHi Jurgen
LOOP AT git_bdc INTO gwa_bdc.
refresh messtab[].
PERFORM bdc_dynpro USING 'SAPMV60A' '0102'.
PERFORM bdc_field USING 'BDC_CURSOR'
'KOMFK-VBELN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'KOMFK-VBELN(01)'
gwa_bdc-vbeln.
PERFORM bdc_dynpro USING 'SAPMV60A' '0104'.
PERFORM bdc_field USING 'BDC_CURSOR'
'VBRK-FKART'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMV60A' '0104'.
PERFORM bdc_field USING 'BDC_CURSOR'
'VBRK-FKART'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMV60A' '0104'.
PERFORM bdc_field USING 'BDC_CURSOR'
'VBRK-FKART'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH'.
REFRESH messtab[].
CALL TRANSACTION 'VF01' USING bdcdata
OPTIONS FROM wa_options
MESSAGES INTO messtab.
Error message population....
REFRESH bdcdata[].
ENDLOOP.
Thanks,
Srikanth.A -
No batch input data for screen SAPMSSY3 0131 in Sales order IDOC
I am processing Sales order IDOCS in status 64 using RBDAPP01 .Some of them error out to status 51 with the message -
No batch input data for screen SAPMSSY3 0131 .
I know the standard IDOC inbound process tries to simulate the posting in a BDC like process.
Now, I went to we19 and the screen hangs up in a pop up in the partners tab with partner type 'WE' and my shipto (which is actually filled in the IDOC), missing..upon repeatedly hitting enter, it goes thru and an idoc is posted in status 53. But still unable to get through the root of this issue.
Any, insight will help.Hi,
I think the pop-up is generated through and user-exit for which recording is missing. This is why your idoc stays in status 64...
Handle the screen recording in the user exit IDOC_INPUT_ORDERS
user exit routine
PERFORM customer_function_dynpro.
FORM CUSTOMER_FUNCTION_DYNPRO.
CALL CUSTOMER-FUNCTION '002'
EXPORTING DXVBAK = XVBAK
DVTCOMAG = VTCOMAG
DLAST_DYNPRO = LAST_DYNPRO
DXMESCOD = IDOC_CONTRL-MESCOD
TABLES DXBDCDATA = BDCDATA
DXVBAP = XVBAP
DXVBEP = XVBEP
DYVBEP = YVBEP
DXVBADR = XVBADR
DYVBADR = YVBADR
DXVBPA = XVBPA
DXVBUV = XVBUV
DIDOC_DATA = IDOC_DATA
DXKOMV = XKOMV
DXVEKP = XVEKP
DYVEKP = YVEKP
EXCEPTIONS
USER_ERROR = 01.
Regards,
Krishnakumar -
Error in LSMW for MM41 - "No batch input data for screen SAPLMGMW 0100"
I'm trying to create an LSMW for MM41 to create new Retail articles en Mass. This will be used to only create the Basic view as other LSMW's already exist to maintain the other views. I've created the Recording and setup the LSMW already. My data is read correctly from the source file. When I execute the batch session it fails with the following error - "No batch input data for screen SAPLMGMW 0100".
I assume the fields in MM41 screen are not setup for batch processing. Could someone with more knowledge or experience in SAP Retail please confirm my assumption and explain where this is setup or provide an alternative to creating new articles en Mass via MM41? The direct input method is more suited for MM01 and not MM41.
Regards
FawaazHi Guys,
Thanks so much for all the prompt responses. My issue is now resolved.
The issue, I'm sure, was my default settings in the MM41 screen which the recording probably took into account or the batch program didn't like. I deleted my recording and created a new one but before I started the recording, I went into the MM41 screen and removed all default values AND view selections. I made my Basic view selection constant in my recording and also in my field mapping. My LSMW for MM41 is now working perfectly.
Just to answer some of the questions above, my LSMW was Reading and Converting the data in my source file fine. When I display the Read and Converted data, it shows the data fields in the correct place.
Thanks again.
Regards
Fawaaz -
"no batch input data for screen SAPLMR!M 6220 in BDC while holding Invoice
Hi
I am facing a problem while uploading Invoice data and to hold the data in miro transaction I am getting the error
"no batch input data for screen SAPLMR!M 6220 " . It is for non PO data only I am facing this problem using BDC.
But for Po based Invoice I am getting Invoice number while holding the Invoice. I am Using SHBDB to record the
transaction details
Please give me some solution regrading this.
SamirKrish ,
I am doing it in same transaction MIRO for both PO and NON-PO. I am able to generate an Invoice number while holding the Invoice For NON-PO taking vendor as invoice Party .While I am recording it in SHDB and trying to use the
same in my BDC Programe it is throughing this error and also by testing the program which has been generated by the
SHDB trnasaction i am getting the same Error . Is there any diferrent trnasaction that is used to hold NON_PO invoice ?
Where Invoice number will be generated automatically ? -
No batch input data for screen SAPMSSY3 0131
Dear All,
I have developed a report where i need to upload (old and new)incoterms,payment terms,document type and update in the table ekko with my new values (incoterms,payment terms and document type).
Problem :For this report i have uploaded the excel sheet and values are getting uploaded into my internal table.but when using bapi_agreement_maintain to update the ekko table ,in return table its showing No batch input data for screen SAPMSSY3 0131.
Anyone please give the reason/solution to solve the problem.
Regards,
Bhavani.Hi,
screen SAPMSSY3 0131 is the debugging screen so if you have any break-points in any of the transactions remove the breakpoint and check.
Basically this BAPI is calling a transaction to execute a transaction in no dialog mode so if you have break-points in any of those program you will face this issue.
Regards,
Himanshu -
Error: No batch input data for screen SAPMZVKDIALOGDEMO 1000 Help Needed
Hi Experts!
I wrote a program for BDC. I am attaching the code herewith. When i am trying to process the session in SM35, i was getting the error: No batch input data for screen SAPMZVKDIALOGDEMO 1000. Can anyone please tell me, what am i doing wrong.
Thanks.
REPORT zvkbdcdemo01.
DATA: bdc_tab LIKE bdcdata OCCURS 6 WITH HEADER LINE.
DATA: session LIKE apqi-groupid VALUE 'Session #1'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
* DEST = FILLER8
group = session
* HOLDDATE = FILLER8
* KEEP = FILLER1
user = sy-uname
* RECORD = FILLER1
* PROG = SY-CPROG
* IMPORTING
* QID =
* EXCEPTIONS
* CLIENT_INVALID = 1
* DESTINATION_INVALID = 2
* GROUP_INVALID = 3
* GROUP_IS_LOCKED = 4
* HOLDDATE_INVALID = 5
* INTERNAL_ERROR = 6
* QUEUE_ERROR = 7
* RUNNING = 8
* SYSTEM_LOCK_ERROR = 9
* USER_INVALID = 10
* OTHERS = 11
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM fill_bdc_tab.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = 'ZVKTR001'
* POST_LOCAL = NOVBLOCAL
* PRINTING = NOPRINT
* SIMUBATCH = ' '
* CTUPARAMS = ' '
TABLES
dynprotab = bdc_tab
* EXCEPTIONS
* INTERNAL_ERROR = 1
* NOT_OPEN = 2
* QUEUE_ERROR = 3
* TCODE_INVALID = 4
* PRINTING_INVALID = 5
* POSTING_INVALID = 6
* OTHERS = 7
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_CLOSE_GROUP'
* EXCEPTIONS
* NOT_OPEN = 1
* QUEUE_ERROR = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form fill_bdc_tab
* text
FORM fill_bdc_tab.
REFRESH bdc_tab.
PERFORM populate_bdc_tab USING:
'1' 'SAPMZVKDIALOGDEMO' '1000',
' ' 'SFLIGHT-CARRID' 'LH',
' ' 'SFLIGHT-CONNID' '0400',
' ' 'SFLIGHT-FLDATE' '07/07/2007',
' ' 'SFLIGHT-PRICE' '1982',
' ' 'SFLIGHT-CURRENCY' 'EUR',
' ' 'SFLIGHT-PLANETYPE' 'A310-300',
' ' 'BDC_OKCODE' 'CREA'.
ENDFORM. "fill_bdc_tab
*& Form POPULATE_BDC_TAB
* text
* -->FLAG text
* -->VAR1 text
* -->VAR2 text
FORM populate_bdc_tab USING flag var1 var2.
CLEAR bdc_tab.
IF flag = '1'.
bdc_tab-program = var1.
bdc_tab-dynpro = var2.
bdc_tab-dynbegin = 'X'.
ELSE.
bdc_tab-fnam = var1.
bdc_tab-fval = var2.
ENDIF.
APPEND bdc_tab.
ENDFORM. "POPULATE_BDC_TABThis normally means that you are trying to insert data on a screen for which a particular field is not available.
So check screen number, screen fields and report name. In case of screen fields, use F1, F9 (technical information), and check the name of the screen field for batch processing (all the way at th bottom of the pop-up). This can differ from actual name of the screen field.
If all this is ok, try to create a recording of the transaction with SM37. -
FBRA: No batch input data for screen SAPMF05A 0700
Hi Gurus,
I am processing transaction code FBRA on foreground. The document that i am trying to reset involves a foreign currency transations which revaluated periodically.
When I try to reset the document it gives me noteice that "exchange rate differences were posted, clearing document will be reversed. do you want to continue?"
When I press OK, it ask me to enter ther reversal reason "02". Then it gives me an error that "no batch input data for screen SPAMF05A 0700"
Please help me to solve this.
Many thanks!
-JUN-Dear JUN,
All this is telling you is that there is some piece of information that you are not supplying the batch input session. You can analyse the session in SM35 to see what's missing.
Reward points if it is helpful.
Thanks and Regards,
Naveen.
Maybe you are looking for
-
Firefox does not save toolbar I made
Since FF upgraded me to Firefox 23 My tool bars are messed Every time I make a new toolbar Via "Customize" > "Add New Toolbar" after I exit it does not save. Yes I read over 10 different articles on it. 1) I deleted the localstore.rdf and started fro
-
i cant receive my Face Time Notification i only see the missed call afterwards why is this?
-
Re: How to display single I / P Frames with Dripfeed
Thanx Steve and Jean Luc! I did use single MPEG-2 files to feed to the Player, but I couldn't save single P-Frames as they always need an I-Frame in a GOP (I used TMPEGenc to build I-Frames). If you know a Tool to do that, I would be grateful if tell
-
Im just really annoyed. I turned off my data when I barely went over at 4.004 before I went to bed. I just recently checked it to make sure it wasnt using data, But it had gone up to 4.037, after my data had been turned off. So I want to know what
-
can anyone help with how to turn on the hover capability ?