No batch session created for forex run error

Hello
We have run the forex run on 31st may and have included the reversal as well(1st June).This got completed sucessfully with revaluation and its reversal the first day of next month.After a week we reset the forex run,then it should reverse both the revaluation on 31st May and reversal posting on 1st June.However when the reset was run ,the period 31st may was closed which was noticed after the forex reset run was .We selected create postings with the batch session and also checked to create batch session if any errors.
During the reset ,the reversal postings on 1st June got reversed but the forex revaluation on 31st may didnt get reversed(as period was closed).But there is no batch session created.
Please let us know why the session hasnt got created or what could be the reason why batch session in SM35 is not found,if the period was closed for reversal during reset it should have created batch session.
Please advice.

Hi
If your reversal posting have been generated for 1st June, check also in SM35 if there is a batch session in error under Incorrect Tab/In Process/In Background Tab of SM35
Thanks & Regards
Sanil Bhandari

Similar Messages

No batch session created for report RFUMSV50

if i execute the report RFUMSV50 for batch session, in sm35 no session is created.
when i first time ran, then batch was created. i have not changed anything in settings. after that
i posted 5 end to end cases from po to payment. now if i run report no batch session is created
where is the problem?
help please

Ok
But this report is not updating the records and no tax is transferred from interim tax account to final tax account. Also the output of the report is showing no value. It is blank.

NO BATCH INPUT DATA FOR SCREEN SAPMV50A ERROR FROM BDC

HI
I get the following error when my program runs inforeground, using a BDC(VL02N)- 'NO BATCH INPUT DATA FOR SCREEN SAPMV50A SCREEN 1000.'
i am trying to attach a serial number to the sales order and it seems that the warning message is causing the error. i have recorderd the transaction to death, and as mentioned, when i run in debug mode, it works fine.
Can anyone tell me how i can overcome\suppress the warning message? i have inserted 2 okcodes before the warning is Issued and that did not help Please see below for an excerpt of the coding:.
PERFORM bdc_dynpro USING 'SAPLIPW1'      '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'    'RIPW0-SERNR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'    '/00'.
PERFORM bdc_field USING 'BDC_OKCODE'    '/00'.
PERFORM bdc_field USING 'BDC_OKCODE'    '=RWS'.
PERFORM bdc_field USING 'RIPW0-SERNR(01)' itab_chas_data-chas_no     .
PERFORM bdc_dynpro USING 'SAPMSSY0'      '0120'.
PERFORM bdc_field USING 'BDC_OKCODE'    '/00'.
PERFORM bdc_field USING 'BDC_OKCODE'    '=ENTE'.
PERFORM bdc_dynpro USING 'SAPLIPW1'      '0200'.
PERFORM bdc_field USING 'BDC_CURSOR'    'RIPW0-SERNR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'    '=RWS'.
Thanks a Million..

Hi,
Try this link.
No batch input data for screen SAPMP50A 1000
Thank you,

Runn time error "CNTL_ERROR" for batch job created for program RBDAPP01

We have encounter run time error and the batch job for program RBDAPP01 was terminated.
Information on where terminated
    Termination occurred in the ABAP program "CL_GUI_CUSTOM_CONTAINER=======CP" -
     in "CONSTRUCTOR".
    The main program was "RBDAPP01 ".
    In the source code you have the termination point in line 62
    of the (Include) program "CL_GUI_CUSTOM_CONTAINER=======CM001".
    The program "CL_GUI_CUSTOM_CONTAINER=======CP" was started as a background job.
Can any member reachout help in identifying the reason.

Hi Amol,
Check the following link.
Call Transaction 'VL32N' in background: termination with Exception
Regards,
Raju.

Batch not created for the Inspection lot?

Hi Experts,
I have created a the production order by inputting the Batch in the GR tab and released the production order. The release of Production order will create a Type 03 lot , but surprisingly it doesn't show the Batch in the Batch field when i look the inspection lot that was created by release of production order, instead it shows blank. I have checked the material master and it is batch managed material. Please let me know where I'm going wrong.
Configuration- Batch is unique at material level indicator checked
my plant has Batch status management indicator
Please find the screenshot below for type 03 lot and also the Batch management indicator in material master in sales/general view, work scheduling and warehouse1.
Thanks,
Pavan

Hi Pavan,
According to SAP Note 50618, you may consider to implement the correction on that note or use partial lot assignment.
For partial lot assignment, you can find the setting in Routing header and customizing in SPRO with path: Quality Management - Quality Planning - Inspection Planning - General - Define Identifier for Inspection Points.
There's also another discussion regarding this issue. Please find here.
Regards,
Julian

Planning File Entry Not Created For MRP Run

We are running MRP in backgroung at MRP area level as per scheduled. One material is missing from MRP run. We are expecting that we should get the proposals because stock is zero ( below reorder level) on the date of sheduled MRP run. Earlier it is working.The material MRP relevant data is given below.
MRP Type - VB
Reorder Level - 6
Lot Size - Fx
Fixed Lot Size - 10
Minimun Safety Level - 10
Please help us to resolve this issue.
Thanks in advance. For any clarofiaction, pls revert back.
Regards,
Chetan K

Hi,
Please check whether you have maintained the Availability check group 01 or 02 in MRP-3 View.
Also check the Dependent requirement selection in MRP-4 view individual collective and Selection method in MRP-4 view for its assy material.
Check the Plant specific material status whether it is blocked for any procurement or usage in Basic Data and Purchasing,MRP views.
thanks and regards
muru

Is a session created for an anonymous user?

Hi all
Does the JEE server create a session even when an anonymous user accesses the server? Does he get a session Id? Do I have to setup the server to track anonymous users?
Thank you.
regards
Lakshminarayanan.V

Hi,
>Does the JEE server create a session even when an anonymous user accesses the server?
Yes. The anonymous user has the user ID J2EE_GUEST by default.
>Does he get a session Id?
Yes.
>Do I have to setup the server to track anonymous users?
Depends on your use case.
Regards,
Satyajit.

Batch session in sm35

Hi gurus ,
I am not getting any batch session when I am running ff67. In sm35 i am not getting related batch session.
Please Guide.
Thanks

Hi,
Go to below mentioned path and enter the symbols created for bank reco
SAP Customizing Implementation Guide> Financial Accounting (New)> Bank Accounting> Business Transactions> Payment Transactions>Manual Bank Statement> Electronic Bank Statement> Make Global Settings for Electronic Bank Statement> Create keys for posting rule
Best of luck

Batch session

hi experts,
My program is Batch session and the batch session is for posting fi documents(FB01). and iam doing by using rfbibl00 program. Actually there r 3 types of currencies while updation and one of them is company code currency(dmbe2). My requirement is i should not pass the value for company code currency dmbe2 when the currency key is equal to USD.
what they said is check in table T001 for example if the company code(BUKRS) = 1001 then check for company code currency(dmbe2) if it is equal to USD then dont pass the value dmbe2 to session.
please help me with the code.
Thanks and regards,
Ramya.

hi
check with this logic
select single * into work area from t001
where company code eq '1001'.
if sy-subrc eq 0 and
workarea-WAERS eq 'USD'.
dmeb2 = ' '.
else
demb2 = 'pass the value'.
end if.
If you are doing this in side the loop, then instead of taking "select single *", write the select statement outside the loop for t001 and take values into internal table. Then inside the loop user Read statement in the place of "select single *"
Reward if it dose.
Thanks
Siva kumar

Page Views and Sessions/Users for web tests

It seems that when you have a URL ping test that the sessions and users count increases but the page views do not counted. Is this correct? I have 10k sessions/users over the last week but ~150 page views. If I look at the server requests I also have around
50K server requests (around 5 requests on the home page).
Why is App Insights not tracking page views for the web tests but it is tracking everything else?

Currently this is a correct behavior. Page Views are sent by javascript snippet which is not executed when you use web tests. User and session are counted by server side logic (AI Web SDK) which is executed. We will add a feature that detects synthetic
traffic very soon. When implemented charts will filter out users and sessions created for web test pings.
Anastasia

Error while running Batch Session for T.Code F.19

While processing T.Code F.19 in Batch Input Sessions, the log shows following error: "For document type SA, an entry is required in field Reference. Can anyone please help me resolve this issue?
Thanks in advance!
Regards,
AMD

Hi
If your Batch input data is very less, run in foreground and update it manually or
Goto GGb1 select Fi accounting and create substitution under header of the document and keep necessary settings like below
Prerequisite
BKPF-BUKRS = xyz AND SYST-TCODE = F.19 and SYST-UNAME = your user id
Substitution
BKPF-XBLNR = keep any default value
Reg
Vishnu

COREid Federation Error: A local user session could not be created for the

Hi,
I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
I get the following error in the Destination Domain Shareid Log file:
ERROR - [http10113-Processor3] - RECEIVER: ERROR: A local user session could not be created for the assertion
Please help me to solve this issue?
Note: The Web agent runs on the web server instance 8887.
SiteMinder is able to protect the resource when accessed.

Typically that error occurs when the destinations access management system can't find the user based on the SAML attribute. Check to make sure that the attribute that you are matching on matches exactly.

No batch input data for screen SAPMSSY0 0120 error while running LSMW

I created Batch Input Recording for custom check register screen. I completed all the necessary steps but when I process the batch input session, my upload fails and gives me the following error:
No batch input data for screen SAPMSSY0 0120
I ran the Batch input in foreground to see what data am I missing and found out that one of the screen required a "DOUBLE CLICK" as user input and seems that LSMW is not able to process the "DOUBLE CLICK" (even though Batch Input recording captured the "DOUBLE CLICK") to move forward with the transaction.
Does anyone one know How can I overcome this issue or any other workaround.
Thanks Nirankar

Hi Chetan,
List screens utilize SAPMSSY0/0120. Please check within your ABAP coding if you have any customer exit that tries to issue WRITE statements. If so, either remove them or add logic to not issue them in background (e.g. SY-BATCH = 'X'). Another culprit might be a SUBMIT statement in a user exit, which triggers a report with list output. I'm not completely sure, but I think the screen is also used for some value helps (do you have any coding forcing a value help popup?).
Hope this helps, harald

How to create a error message for Deleted batch while creating a PO

Hi ,
Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
when a PO is created for a deleted batch at GI &GR lebel it is showing a error message,
but i want to show a error message while doing the PO creation.
Thanks,
Sachhi

in badi me_process_po_cust u can put this message
METHOD if_ex_me_process_po_cust~check.

Error: No batch input data for screen SAPMZVKDIALOGDEMO 1000 Help Needed

Hi Experts!
I wrote a program for BDC. I am attaching the code herewith. When i am trying to process the session in SM35, i was getting the error: No batch input data for screen SAPMZVKDIALOGDEMO 1000. Can anyone please tell me, what am i doing wrong.
Thanks.
REPORT zvkbdcdemo01.
DATA: bdc_tab LIKE bdcdata OCCURS 6 WITH HEADER LINE.
DATA: session LIKE apqi-groupid VALUE 'Session #1'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
    client                    = sy-mandt
*   DEST                      = FILLER8
    group                     = session
*   HOLDDATE                  = FILLER8
*   KEEP                      = FILLER1
    user                      = sy-uname
*   RECORD                    = FILLER1
*   PROG                      = SY-CPROG
* IMPORTING
*   QID                       =
* EXCEPTIONS
*   CLIENT_INVALID            = 1
*   DESTINATION_INVALID       = 2
*   GROUP_INVALID             = 3
*   GROUP_IS_LOCKED           = 4
*   HOLDDATE_INVALID          = 5
*   INTERNAL_ERROR            = 6
*   QUEUE_ERROR               = 7
*   RUNNING                   = 8
*   SYSTEM_LOCK_ERROR         = 9
*   USER_INVALID              = 10
*   OTHERS                    = 11
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM fill_bdc_tab.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
    tcode                  = 'ZVKTR001'
*   POST_LOCAL             = NOVBLOCAL
*   PRINTING               = NOPRINT
*   SIMUBATCH              = ' '
*   CTUPARAMS              = ' '
TABLES
    dynprotab              = bdc_tab
* EXCEPTIONS
*   INTERNAL_ERROR         = 1
*   NOT_OPEN               = 2
*   QUEUE_ERROR            = 3
*   TCODE_INVALID          = 4
*   PRINTING_INVALID       = 5
*   POSTING_INVALID        = 6
*   OTHERS                 = 7
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_CLOSE_GROUP'
* EXCEPTIONS
*   NOT_OPEN          = 1
*   QUEUE_ERROR       = 2
*   OTHERS            = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form fill_bdc_tab
*       text
FORM fill_bdc_tab.
REFRESH bdc_tab.
PERFORM populate_bdc_tab USING:
'1' 'SAPMZVKDIALOGDEMO' '1000',
' ' 'SFLIGHT-CARRID' 'LH',
' ' 'SFLIGHT-CONNID' '0400',
' ' 'SFLIGHT-FLDATE' '07/07/2007',
' ' 'SFLIGHT-PRICE' '1982',
' ' 'SFLIGHT-CURRENCY' 'EUR',
' ' 'SFLIGHT-PLANETYPE' 'A310-300',
' ' 'BDC_OKCODE' 'CREA'.
ENDFORM.                    "fill_bdc_tab
*&      Form POPULATE_BDC_TAB
*       text
*      -->FLAG       text
*      -->VAR1       text
*      -->VAR2       text
FORM populate_bdc_tab USING flag var1 var2.
CLEAR bdc_tab.
IF flag = '1'.
    bdc_tab-program = var1.
    bdc_tab-dynpro = var2.
    bdc_tab-dynbegin = 'X'.
ELSE.
    bdc_tab-fnam = var1.
    bdc_tab-fval = var2.
ENDIF.
APPEND bdc_tab.
ENDFORM.                    "POPULATE_BDC_TAB

This normally means that you are trying to insert data on a screen for which a particular field is not available.
So check screen number, screen fields and report name. In case of screen fields, use F1, F9 (technical information), and check the name of the screen field for batch processing (all the way at th bottom of the pop-up). This can differ from actual name of the screen field.
If all this is ok, try to create a recording of the transaction with SM37.

No batch session created for forex run error

Similar Messages

Maybe you are looking for