No batch session created for report RFUMSV50

if i execute the report RFUMSV50 for batch session, in sm35 no session is created.
when i first time ran, then batch was created. i have not changed anything in settings. after that
i posted 5 end to end cases from po to payment. now if i run report no batch session is created
where is the problem?
help please

Ok
But this report is not updating the records and no tax is transferred from interim tax account to final tax account. Also the output of the report is showing no value. It is blank.

Similar Messages

No batch session created for forex run error

Hello
We have run the forex run on 31st may and have included the reversal as well(1st June).This got completed sucessfully with revaluation and its reversal the first day of next month.After a week we reset the forex run,then it should reverse both the revaluation on 31st May and reversal posting on 1st June.However when the reset was run ,the period 31st may was closed which was noticed after the forex reset run was .We selected create postings with the batch session and also checked to create batch session if any errors.
During the reset ,the reversal postings on 1st June got reversed but the forex revaluation on 31st may didnt get reversed(as period was closed).But there is no batch session created.
Please let us know why the session hasnt got created or what could be the reason why batch session in SM35 is not found,if the period was closed for reversal during reset it should have created batch session.
Please advice.

Hi
If your reversal posting have been generated for 1st June, check also in SM35 if there is a batch session in error under Incorrect Tab/In Process/In Background Tab of SM35
Thanks & Regards
Sanil Bhandari

Batch not created for the Inspection lot?

Hi Experts,
I have created a the production order by inputting the Batch in the GR tab and released the production order. The release of Production order will create a Type 03 lot , but surprisingly it doesn't show the Batch in the Batch field when i look the inspection lot that was created by release of production order, instead it shows blank. I have checked the material master and it is batch managed material. Please let me know where I'm going wrong.
Configuration- Batch is unique at material level indicator checked
my plant has Batch status management indicator
Please find the screenshot below for type 03 lot and also the Batch management indicator in material master in sales/general view, work scheduling and warehouse1.
Thanks,
Pavan

Hi Pavan,
According to SAP Note 50618, you may consider to implement the correction on that note or use partial lot assignment.
For partial lot assignment, you can find the setting in Routing header and customizing in SPRO with path: Quality Management - Quality Planning - Inspection Planning - General - Define Identifier for Inspection Points.
There's also another discussion regarding this issue. Please find here.
Regards,
Julian

Runn time error "CNTL_ERROR" for batch job created for program RBDAPP01

We have encounter run time error and the batch job for program RBDAPP01 was terminated.
Information on where terminated
    Termination occurred in the ABAP program "CL_GUI_CUSTOM_CONTAINER=======CP" -
     in "CONSTRUCTOR".
    The main program was "RBDAPP01 ".
    In the source code you have the termination point in line 62
    of the (Include) program "CL_GUI_CUSTOM_CONTAINER=======CM001".
    The program "CL_GUI_CUSTOM_CONTAINER=======CP" was started as a background job.
Can any member reachout help in identifying the reason.

Hi Amol,
Check the following link.
Call Transaction 'VL32N' in background: termination with Exception
Regards,
Raju.

Is a session created for an anonymous user?

Hi all
Does the JEE server create a session even when an anonymous user accesses the server? Does he get a session Id? Do I have to setup the server to track anonymous users?
Thank you.
regards
Lakshminarayanan.V

Hi,
>Does the JEE server create a session even when an anonymous user accesses the server?
Yes. The anonymous user has the user ID J2EE_GUEST by default.
>Does he get a session Id?
Yes.
>Do I have to setup the server to track anonymous users?
Depends on your use case.
Regards,
Satyajit.

Problem creating T-Code for report(type Form-report)

Hi all,
Can T-Code be created for reports which are of type'form report '.
Here is the problem in detail :-
I have to use transaction 'CJE3' where four reports got created.These reports are of type 'form report'.Currently I am not able to create the transaction for the reports in se93 transaction.
Please advice on how I can create T-Code for these reports.
Regards,
Anirban

Hi Dutta ,
this report is created by Report painter for this Reports if u want to create tcode please follow the steps.
se93 ---> take option parameter transaction .
1.default valuse for transcation is START_REPORT
2.skip initial Scree = kich this one
3.screen = 0.
4.kich all GUI check boxes
5.last one , u have to entry values like this
D_SREPOVARI-REPORTTYPE = report Type
D_SREPOVARI-REPORT = name of the report in the bottom scree.
Regards
Prabhu

DB Table for Report Painter

Hi all,
Can anybody please let me know in which db table the details of the Report Painter are stored?
If I have a Transaction Code, I want to know if that transaction code is created for Report Painter or not through program not through SE93.
I have to create a report on all Z Transaction Codes.
Thanks in advance.

Hi Mr.A ,
while creating tcode for report painters we will take option PARAMETER Transaction code , so based on the transaction type u can find out from the same tables - TSTCP or TSTC.
regards
Prabhu

Batch session

hi experts,
My program is Batch session and the batch session is for posting fi documents(FB01). and iam doing by using rfbibl00 program. Actually there r 3 types of currencies while updation and one of them is company code currency(dmbe2). My requirement is i should not pass the value for company code currency dmbe2 when the currency key is equal to USD.
what they said is check in table T001 for example if the company code(BUKRS) = 1001 then check for company code currency(dmbe2) if it is equal to USD then dont pass the value dmbe2 to session.
please help me with the code.
Thanks and regards,
Ramya.

hi
check with this logic
select single * into work area from t001
where company code eq '1001'.
if sy-subrc eq 0 and
workarea-WAERS eq 'USD'.
dmeb2 = ' '.
else
demb2 = 'pass the value'.
end if.
If you are doing this in side the loop, then instead of taking "select single *", write the select statement outside the loop for t001 and take values into internal table. Then inside the loop user Read statement in the place of "select single *"
Reward if it dose.
Thanks
Siva kumar

Page Views and Sessions/Users for web tests

It seems that when you have a URL ping test that the sessions and users count increases but the page views do not counted. Is this correct? I have 10k sessions/users over the last week but ~150 page views. If I look at the server requests I also have around
50K server requests (around 5 requests on the home page).
Why is App Insights not tracking page views for the web tests but it is tracking everything else?

Currently this is a correct behavior. Page Views are sent by javascript snippet which is not executed when you use web tests. User and session are counted by server side logic (AI Web SDK) which is executed. We will add a feature that detects synthetic
traffic very soon. When implemented charts will filter out users and sessions created for web test pings.
Anastasia

I Need to Create a report for batch jobs Based on Subject Area.

Hi SAP Guru's,
I need to create a report , that it must show the status of batch jobs Completion Times based on Subject area(SD,MM,FI).
Please help me in this issue ASAP.
Thanks in Advance.
Krishna.

You may need to activate some additional business content if not already installed but there are a lot BI statistics you can report on. Have a look at this:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/f9bd5b0d40537de10000000a1553f6/frameset.htm

BDC - Session Method - No batch input data for screen SAPMZ_TPSCREEN02 100

Hi ABAP Experts,
I have written a Dialog Program For a Screen Which contains 5 fields namely,
carrid,
connid,
fldate,
price,
planetype.
I have written the PAI logic to insert whatever entries entered in the fields, into Database Table SFLIGHT.
I created a Transaction and Tested whether the entries are succesfully entetered into the Database Table and it works just fine.
Now i planned to write a BDC program for the above Transaction so that i can upload data to the Database table from a flat file.
I went to SHDB transaction and created a new recording and transferred the program to generate a source code.
include bdcrecx1.
start-of-selection.
loop at itab.
perform open_group.
perform bdc_dynpro      using 'SAPMZ_TPSCREEN02' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CREA'.
perform bdc_field       using 'BDC_CURSOR'
                              'SFLIGHT-PLANETYPE'.
perform bdc_field       using 'SFLIGHT-CARRID'
                              'AA'.
perform bdc_field       using 'SFLIGHT-CONNID'
                              '0017'.
perform bdc_field       using 'SFLIGHT-FLDATE'
                              '11/01/2007'.
perform bdc_field       using 'SFLIGHT-PRICE'
                              '767'.
perform bdc_field       using 'SFLIGHT-PLANETYPE'
                              'A310-200F'.
perform bdc_transaction using 'Z_TPSCREEN02'.
perform close_group.
Then i defined an internal table which contains the same fields as those in my Screen and Transaction.
I populated the internal table from a flat file using GUI_UPLOAD function module.
I want to clarify - I got this flat file by using the GUI_DOWNLOAD module and later i uploaded the same file using GUI_UPLOAD.
I tested whether the internal table is populated or not using LOOP AT ITAB. WRITE Statements.
Its working just fine.
Finally my code look like this.
report ZVMREC
       no standard page heading line-size 255.
TABLES: sflight.
DATA: BEGIN OF itab OCCURS 0,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
price TYPE sflight-price,
planetype TYPE sflight-planetype,
      END OF itab.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      = 'C:\users\vamc\documents\flightinfo.txt'
    FILETYPE                      = 'ASC'
    HAS_FIELD_SEPARATOR           = 'X'
tables
    data_tab                      = itab.
include bdcrecx1.
start-of-selection.
loop at itab.
perform open_group.
perform bdc_dynpro      using 'SAPMZ_TPSCREEN02' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CREA'.
perform bdc_field       using 'BDC_CURSOR'
                              'SFLIGHT-PLANETYPE'.
perform bdc_field       using 'SFLIGHT-CARRID'
                              'AA'.
perform bdc_field       using 'SFLIGHT-CONNID'
                              '0017'.
perform bdc_field       using 'SFLIGHT-FLDATE'
                              '11/01/2007'.
perform bdc_field       using 'SFLIGHT-PRICE'
                              '767'.
perform bdc_field       using 'SFLIGHT-PLANETYPE'
                              'A310-200F'.
perform bdc_transaction using 'Z_TPSCREEN02'.
perform close_group.
endloop.
I checked for errors, activated and executed.
I gave session name and executed, it generated same number of sessions as number of records.
I went to SM35 and Processed one of the sessions in foreground.
It brought my screen up with all fields fill up by the fields of first record in the internal table and with
OK Code popping up.
I check the OK Code.
Now the problem has come up, its says
*No batch input data for screen SAPMZ_TPSCREEN02 1000 *
My session was now incorrectly processed,
Please help me to fix this problem.
I searched so many forums and google it a lot.
But i didn't find any clue.
Kindly take your time and have a look at this problem and let me know how can i fix it.
Thank you very much all.
Shiv
Edited by: Sivaram Naga on Apr 15, 2008 5:57 AM

I used this code to convert the date format. I'm still getting the short dump.
   DATA: v_yyyy(4) TYPE c,
       v_mm(2) TYPE c,
       v_dd(2) TYPE c,
       v_date(8) TYPE c.
v_yyyy = itab-fldate(4).
v_mm = itab-fldate+4(2).
v_dd = itab-fldate+6(2).
concatenate v_yyyy v_mm v_dd into v_date.
I'm once again, putting my code.
report ZVMREC
       no standard page heading line-size 255.
TABLES: sflight.
DATA: BEGIN OF itab OCCURS 0,
carrid LIKE sflight-carrid,
connid LIKE sflight-connid,
fldate LIKE sflight-fldate,
price TYPE sflight-price,
planetype TYPE sflight-planetype,
      END OF itab.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      = 'C:\users\vamc\documents\flightinfo.txt'
    FILETYPE                      = 'ASC'
    HAS_FIELD_SEPARATOR           = 'X'
tables
    data_tab                      = itab.
include bdcrecx1.
start-of-selection.
loop at itab.
DATA: v_yyyy(4) TYPE c,
       v_mm(2) TYPE c,
       v_dd(2) TYPE c,
       v_date(8) TYPE c.
v_yyyy = itab-fldate(4).
v_mm = itab-fldate+4(2).
v_dd = itab-fldate+6(2).
concatenate v_yyyy v_mm v_dd into v_date.
perform open_group.
perform bdc_dynpro      using 'SAPMZ_TPSCREEN02' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CREA'.
perform bdc_field       using 'BDC_CURSOR'
                              'SFLIGHT-PLANETYPE'.
perform bdc_field       using 'SFLIGHT-CARRID'
                               ITAB-CARRID.
perform bdc_field       using 'SFLIGHT-CONNID'
                               ITAB-CONNID.
perform bdc_field       using 'SFLIGHT-FLDATE'
                              V_DATE.
perform bdc_field       using 'SFLIGHT-PRICE'
                               ITAB-PRICE.
perform bdc_field       using 'SFLIGHT-PLANETYPE'
                              ITAB-PLANETYPE.
perform bdc_transaction using 'Z_TPSCREEN02'.
perform close_group.
endloop.
Kindly take a look at it and please help me out. I tried very hard. But i dont understand why?
Thanks
Shiv
Edited by: Sivaram Naga on Apr 15, 2008 5:46 PM

Get a insert session value for SQL query at report

Hi friends
I created a global temp table and procedure to support web search form.
and a search result report. The procudure
gets search result from multip tables and
insert into temp table --recordsearch. I can get value from temp table by call procedure
at SQL*Plus.
However, I can not get this value by web report.
How can I get this insert session value and pass to SQL query for report?
Thanks,
Newweb
CREATE GLOBAL TEMPORARY TABLE recordsearch
(emp_id          VARCHAR2(200),
ssn               VARCHAR2(9),
fname          VARCHAR2(200),
lname           VARCHAR2(200),
m_name          VARCHAR2(200)
) ON COMMIT PRESERVE ROWS;

it possible that your web form does not have a persistent, dedicated connection. if you have connection pooling for example, multiple sessions will see the same instance of the GTT, so if one deletes it, then nobody sees it (or you can see others data). if the connections are not persistent, then they can disconnect between calls, deleting the GTT table.

Delete the internal sessions created in the report program

Hi,
I have problem when a user defined transaction is called for many times from a report program. My program uses call transaction method to call a user-defined transaction for many times, i get a error like 'Maximum number of internal sessions reached' when the number of internal sessions created exceeds 6 . Please let me know whether there is any way to close/delete the previous internal sessions that are created through the program.
Please help me to solve this problem.
Thanks in Advance,
Prabavathi

Hi prabhavathi,
1. If a new window is opened then, by default, we can have atmost
six sessions.
(This can be increased by basis team)
2. I just tried, from a program,
using call transaction 10 times.
But the first one is executed, and when we come out of it,
only then the second one gets executed.
Its remaining in only one window/session.
regards,
amit m.

Batch Jobs for Reports?

Hi,
Is there a way to schedule the reports to run through a batch job in Production ? Say the job will run the report in the night so that the users can come and see it in the morning.
The report also prompts for selections / filters before it runs.
I am using SAP BW / Bex for reporting.
Any inputs on how to go about it would help.
Rgds
Shweta

Hi Shweta,
Throw the Reporting Agent you can schedule the report and Web templates in the SAP BW 3.x format
http://help.sap.com/saphelp_nw04/helpdata/en/28/734d3caa70ea6fe10000000a114084/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/2.0/2.0b%20reporting%20agent%20incl.%20precalculating%20web%20templates.pdf
i hope above links would lead you to the solution of your problem, still u have any problem ..........
you can start reading this two links...
other wise can you follow these steps
1.Just go to RSA1
2.Go to reportin agent tab below modelling and monitoring tabs.
3.go to print
4.find and select your info provider
5.slect your query
6.right click and go for new setting
7.name it and do all the setting as you need for printing, here you can specify printer name and page formats also.
8.drag and drpot it in right pane where you have scheduling packages (if not present then create your own)
9.schedule it as per your print schedules.
Hope it helps.
Regards,
Krissh

RFBIBL00 - issue in Batch Input Session created

Hi Experts,
I am Posting a document thru FB01, for this I am using RFBIBL00 and RSBDCSUB programs to create a Batch Input Session,
I have filled all the required fields for structures BBPKF, BBSEG and BBTAX, but the session created is not processed successfully, while processing it in Foreground, I am getting a Message saying 'No batch input data for screen SAPLKEAK 0300 '.
Can anyone please help me on this.

Hi Experts,
Now I have 2 errors in the Batch Input Session Log,
1. Field COBL-PRCTR(Profit Center). does not exist in the screen SAPLKACB 0002
2. Field DKACB-XERGO(Details - Its a check box in the screen). does not exist in the screen SAPLKACB 0002.
But I can see that these filelds are existing in the screens, can anyone let me know why this error occurs.
This is occuring after COPA generation with new fields.
I am trying for a OSS Note also, but I am not getting any. Please help.

No batch session created for report RFUMSV50

Similar Messages

Maybe you are looking for